Database Users

[Q][I9506] Stuck on GT-I9506 logo (no recovery, only Download Mode)

OK. First some info about the phone:
GT-I9506
S/N: RF8F20W841T
PDA: PL2 / PHONE: OJ2 / CSC: OK1 (NEE)
I replaced the screen few days ago and got the phone working at last! It was with STOCK 4.4.2. So i used OTA to update it to latest STOCK 5.0.1. After this I have rooted it with CF-AUTO-ROOT and it was fine for two days.
After two days wile charging with S CHARGER COVER (OEM) it just restarted. Was working ok but after few minutes hanged and rebooted again. Then the bootloop appeared. First screen with GT-I9506 logo and then blue flash and again.
CAN'T BOOT IN TO THE SYSTEM (no matter what I can't make it to boot properly)
CAN'T ENTER RECOVERY (it's showing that's booting in to the recovery but instead of recovery it just restart)
CAN ENTER DOWNLOAD MODE (no problem with entering DM)
What I have done so far:
- Kies recovery with phone model number and serial number (still bootloop).
- Odin flashing STOCK rom from SamFirm download (still bootloop) (single and 4 files flash).
- Re-partitioning (flashing PIT file).
- Reflashing bootloder (still nothing).
- Tryed CWM, TWRP and other Recovery, non of them boot up.
Using those files to flash:
AP_I9506XXSDPL2_CL6069869_QB11747892_REV03_user_low_ship.tar
BL_I9506XXSDPL2_CL6069869_QB11747892_REV03_user_low_ship.tar
CP_I9506XXUDOJ2_REV00_CL1318424.tar
CSC_NEE_I9506NEEDOK1_CL6069869_QB7017077_REV03_user_low_ship.tar
I would really appreciate help from someone more skilled then me.

Is it possible that I should flash 4.4.2 STOCK ROM instead of 5.0.1 to revive it? I came with 4.4.2 so maybe to make him work again I should start from flashing STOCK 4.4.2 NEE?
UPDATE:
STOCK FIRMWARE 4.3 and 4.4.2 does not help... I'm out of ideas...

After flashing bootloader it self I manage to get to the point when Green Droid appear and after 30% of progress it restarts and bootloop is back again...

Uninstall any old drivers and install new drivers.
Download the official file latest for your device from here
And try to reflash again, it should work or ultimately you will have to buy a new motherboard for your device....

You are likely to have encountered a hardware fault, assuming everything you tried were done correctly. The only fix is to buy a new phone, because of Samsung's stupid Knox policy D:

Huawei P9 lite (VNS-L31) is hang on: "Your devices is booting now...."

Good evening and greetings from Germany
i have tried to install a custom rom on my HUAWEI P9 lite VNS-L31.
Now the devices does not boot. The ERecovery (VolUP+Power) is still working. The Fastboot&Rescue (VolDown+Power) works too.
But when i try to install the stock Rom(VolUP+VolDown+Power), which i download from the Huawei consumer website, the device Shows a unanimated Huawei Symbol and say: "Your device is booting now..." An then nothing.
Bevor I have activated the developer mode, the OEM is on, also the usb-debugging. I have installed Android 6.0 with EMUI 4.1.
The Bootloader is unlocked too.
Sorry for my bad english.
Thanks
Merlin

Does 'factory reset' in eRecovery give you an error?

Nathoufresh said:
Does 'factory reset' in eRecovery give you an error?
Click to expand...
Click to collapse
I can only choose download latest Version an recovery. Then he say there is no newer Version and give me the choice reboot or shutdown.

ThWzzrd said:
I can only choose download latest Version an recovery. Then he say there is no newer Version and give me the choice reboot or shutdown.
Click to expand...
Click to collapse
Try install TWRP recovery via fastboot and then flash the stock ROM. I'll will give you a link to my Google Drive to download a proper VNS-L31 stock rom that worked for me. I'll do that once home.

Need help with Getting package info failed (Huawei Nova Plus)

Hello mates, hope u r doing well,
I have a problem with my Huawei Nova Plus AL10 (chineese version), i tried to update the version from 6 toNougat 7 with Huawei firmware finder, when arrived at 100%, it reboots and stucks in Huawei eRecovery (Getting package info failed msg appears).
Than i tried to downlad the official firmware AL10 (chineese version) and flash the phone with sd card (Dload==>Update), it loads and stops in 5% or 49%, the eRecovery and factory reset has never managed to download anything for me, always failed...
NB: Fastboot is working
Any help please neeeeeeeed solution

Fastboot should work,boot into it ( press and hold Volume Down and Power key for a while. You would see a green android.) and make sure you have adb/fastboot drivers installed then try. If that works, you can flash twrp and then a rom

missing recovery mode on huawei p8

so i tried to flash twrp via the app and i was rooted with kingroot when i flashed it sez that it flashed successfully but when i rebooted the device i saw a white screen that said
fastboot
atention
please update your system again
"android logo"
func no. 11
error code no. 2 (or something like that)
can someone please tell me what is it or how to fix it
i cant update my phone or do a factory reset
i have a huawei p8 gra-lo9 global

My huawei p8 lite (ale-l21) stucks in rescue mode

My phone huawei p8 lite ALE-L21 STUCKS IN RESCUE MODE.THAT HAPPENS ,
I ROOTED MY PHONE AND I WANT TO INSTALL TWRP.SO I DOWNLOAD IMAGE FOR HUAWEI AND INSTALL AN APP FLASH RECOVERY.WHEN I CLICK OPTION UNLOCK BOOT LOADER MY PHONE ENTERS INTO FASTBOOT AND RECOVERY MODE AND IT SAYS MY PHONE WAS UNLOCKED. THEN I CLICK AN ANOTHER OPTION AND IT TURNS MY PHONE INTO STUCK. MY PHONE WAS PERFECTLY WORKING BEFORE AND ONLY A CLICK CHANGED IT ALL.. ON MY SCREEN IT SAYS
Error!
Func No:10(boot image)
Error No:2(boot image failed in normalboot mode)
Attention!
Please update your system again.
Update user guide :
Zh.ui.vmall.com/emotiondownload.php?mod=restore
WHAT DID I DO??
I GO TO MANY REPAIRING CENTERS AND THEY CANT DO THIS..
PLEASE HELP ME....PLEASE....THE KEYS (VOLUME AND POWER IS BOTH NOT WORKING.BUT I CAN REPAIR IT).
I HAVE A LAPTOP.SO GIVE ME ADVICES I CAN DO IT..

IMHO you unrecoverably bricked the phone, otherwise the repair centers you contacted could have helped.