Database Users

Cannot update Galaxy Tab !

This morning connected my Galaxy Tab to KIES and it prompted that there is an update !!
it took ages to download its binary files then finally after it got done, it gave me a decryption error !!
I have changed my sales code to gain access to market, could this be the problem or do i redownload the files !!
Isn't there a way to UPGRADE fw via OTA? or placing update.zip in root of sd nd flashing from recovery? (similar to HTC devices)
how do I upgrade to the latest version? help please
Cheers
Jackie
PS: Please find attached the firmware code : current and new !

Are you UK based Jackie? Just guessing as you said cheers! I've seen nothing this morning though have read there was an Android Market update which I had already downloaded and applied, maybe why I'm seeing no update.

no I'm based in UAE !! that's just teh way I speak !!

Ah right, nice to read it all the same, Cheers!

so anyone has any idea?

Jackie,
I don't bother with Kies.... It put my SGS in a right mess and couldn't be used until I sorted it out with another ROM and a different PC software upgrader by the name of Odin.
Your best bet is to go on over to samfirmware.com and check out the latest ROM's available.
I'm sending you also a link which although was written for the SGS and Froyo it's still relevant for ROM files for the Tab and how to use Odin.
See here:- How to use Odin to Upgrade the SGS to Froyo

Beards said:
Jackie,
I don't bother with Kies.... It put my SGS in a right mess and couldn't be used until I sorted it out with another ROM and a different PC software upgrader by the name of Odin.
Your best bet is to go on over to samfirmware.com and check out the latest ROM's available.
I'm sending you also a link which although was written for the SGS and Froyo it's still relevant for ROM files for the Tab and how to use Odin.
See here:- How to use Odin to Upgrade the SGS to Froyo
Click to expand...
Click to collapse
How do I know which is the latest ROM is for my TAB !
I checked out samfirmware, but it has loads of firmwares !
I'll check out what to do with ODIN though !
Thanks a lot
Cheers

jackie_jagger said:
How do I know which is the latest ROM is for my TAB !
I checked out samfirmware, but it has loads of firmwares !
I'll check out what to do with ODIN though !
Thanks a lot
Cheers
Click to expand...
Click to collapse
First, what ROM version do you currently have installed?
Next, look at the list of ROM's available see here.
You need to find out if you are on a European, Asian, Arabic, etc ROM and decide if you want to stay on that list or opt to another nation list.
For European lists JMA is the latest. There's a topic on JMA here.

PDA: P1000JPJJ2
Phone: P1000JXJJ1
CSC: P1000OJPJJ3
is what is being reported on *#1234# and samfirmware says this is the Arabic firmware and the latest for Arabic is P1000JVJL1 December 2010, not that I'm interested in any of the region specific apps - just wondering what has been fixed in these firmwares and also if flashing would delete all my data (I'm guessing it would)
I don't mind flashing a European firmware too, so which would be best?
PS: Tab is currently rooted with OCLF set ! =)
Cheers

Hi may i ask if you do firmware update does the tab have to be sim free not lock to a network as im on t-mobile uk, i dont want to brick my tab
thanks

jackie_jagger said:
PDA: P1000JPJJ2
Phone: P1000JXJJ1
CSC: P1000OJPJJ3
is what is being reported on *#1234# and samfirmware says this is the Arabic firmware and the latest for Arabic is P1000JVJL1 December 2010, not that I'm interested in any of the region specific apps - just wondering what has been fixed in these firmwares and also if flashing would delete all my data (I'm guessing it would)
I don't mind flashing a European firmware too, so which would be best?
PS: Tab is currently rooted with OCLF set ! =)
Cheers
Click to expand...
Click to collapse
It should not delete any data.
The browser and camera have been improved.
The browser now scrolls smoother.
The camera focus's much better.
No idea what other improvements have been made.
It does not really matter which firmware you wish to use BUT bear in mind a number of users who have performed a lagfix have had issues in upgrading the ROM.
You MUST ensure you remove any lagfix applied otherwise you stand a good chance in bricking the phone.
Also, ensure you have access to the Recovery and download mode.
You will need this if you 'brick' the phone.
ownhd2 said:
Hi may i ask if you do firmware update does the tab have to be sim free not lock to a network as im on t-mobile uk, i dont want to brick my tab
thanks
Click to expand...
Click to collapse
You need someone who is on a T-Mobile locked phone to answer this. I have heard of users on carrier networks who have run into issues.
Basically, unless you have a sound knowledge in what you are doing I would not attempt it until you get good solid advice.

seems like a long procedure, I'll hold off until i'm done with my exams....
also should I try KIES again? just in case ?? o.0

jackie_jagger said:
seems like a long procedure, I'll hold off until i'm done with my exams....
also should I try KIES again? just in case ?? o.0
Click to expand...
Click to collapse
You can try but I'd still make sure you have access to recovery and download first, just in case anything goes wrong.

Aight !! thanks a bunch !! will do

Got a similar problem... info says its P1000XXJID, valid euro firmware... Bought the tab in Hungary (Middle of europe), carrier free, and after looking at samfirmware.com's ROM list I was wondering about the updates.
Kies tells me this version can't be updated...
Can anyone help me with this problem?

Many, Many of us here in UK are having problems and are unsuccessful when trying to update/upgrade using Kies.
Hopefully Kies will get fixed properly to allow us all to use it.

ziffos said:
Many, Many of us here in UK are having problems and are unsuccessful when trying to update/upgrade using Kies.
Hopefully Kies will get fixed properly to allow us all to use it.
Click to expand...
Click to collapse
Even ActiveSync was better... at least it didn't offer the SW update...

to trick kies to update u could use kies registry patcher. I have sucsessfully updated via kies from jj3 -> jj7 (when no updates was availible)
read thru this post
http://forum.xda-developers.com/showthread.php?t=863386
Use the info from check fus and paste it in registry patcher, reboot pc - start kies - connect phone - something should happen.

[Q] Why won't my Beast Running UBKK2 Update?

Since I received my N7000 on November 17, 2011 from Mobilecityonline my Galaxy Note won't update. It's running UBKK2 - the CSC is TTT - which a Brazilian CSC.
I've searched every thread and correctly followed every step of the process I've found unsuccessfully, I've tried the manual update and receive "no update available" every time I read about a new firmware release. The CSC is listing only 3 codes; VNO, TTT, and TDR - I installed each one of these CSC codes in an attempt to prompt a software update to no avail. I haven't even gotten the update from January that provided the addition of the Torch & everything that came with it!
Short of rooting my Note is there anything I can do to either change the CSC Code to one that receives updates regularly or manually update the firmware? I thought I'd wait until ICS became available hoping that would correct these issues but I'm slowly getting PO'd that I may not be even to receive ICS.
Plus I didn't/don't see the reason to have rooted by now - I've rooted all of my Android devices from HTC EVO 4G's & 3D's, Nook Color, to Asus Transformers. Is there anything I can do without rooting this beast and will I even receive Ice Cream Sandwich?
I'm begging for help please. I'd sincerely appreciate ANY help and I'm willing to donate to anyone that will help achieve everything I'm missing out on to date.
Thank you in advance,
Jim G.

If keeping it stock is all you want, just download one of the stock firmwares and flash it with odin.
You may have to be a member to see this link but.....
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-N7000&r=6#regiona
^^^
They are the South Amercian firmwares currently out, but the European ones are newer if you want to try those.

Wow that was fast!
Wow! Thank you for the super fast reply. Can I D/L and use any stock firmware, I was hoping to use either the UK or German versions cuz they look like they get updates more often than the rest. If I'm wrong I stand corrected - could you please point out a version to use or am I stuck using the BZ version forever?
Oh Lord I hope not! * Forgive me - I saw you suggested the EU versions after I hurried to reply, my fault! *
Again, Thank You in advance,
Jim G.

Brazil Note.
I too have a Note with a ROM from Brazil. Since this is my first Android phone and I'm a noob so far, what will it take to get mine over to a euro one. Will this brick my phone? What region do you recommend for a US user? I understand that you meant Europe, but there a lot of choices like open, open euro or open germany or europ or german. Any directions or advice is greatly appreciated. Thanks.

flshing a firmware for another region is fine... I offen just update to whereever has the newest update

But if i update to a stock rom from another country without changing csc, will i be able to update via kies whenever a newer csc update gets release online for my country? I got this ideia it wont be possible and will still need to change it again via Odin. It bother me if it wipes my phone each time i update. Still in kka/5 here with unlocked phone...
Sent from my GT-N7000 using XDA

William Haven said:
But if i update to a stock rom from another country without changing csc, will i be able to update via kies whenever a newer csc update gets release online for my country? I got this ideia it wont be possible and will still need to change it again via Odin. It bother me if it wipes my phone each time i update. Still in kka/5 here with unlocked phone...
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
After updating to another regions ROM, You can just Odin back to the original stock ROM if you really wanted to, to restore KIES function for the original configuration.
But to be honest, the only time I ever have, is just for warranty purposes, I don't touch kies in any shape or form, there really is no need.
The way I work is, I like to use the stock ROMs, but rooted etc... So, when I got the phone, I rooted it, put the ClockWorkMod Recovery (CWM) on and now I just update my ROM with the repacked stock versions made to be flashed with CWM. They are exactly the same ROMs but rooted and deodexed, some I "believe" are multi CSC too.
Swyped from my finger, to your face on my Samsung Galaxy Note, using Tapatalk!

Thank you for all the help! I'm choosing to use the open-Germany (DBT) stock ROM cuz I've been keeping track of the ROM that was updated the most. I found it to be the German and UK versions but it seems the open-German edges it out.
I've got it all D/L'd and am actually waiting to get my notebook up and running after a CPU upgrade. Once I receive the thermal paste updating my Beast is the 1st order of business!
It sucks that the UBKK2 firmware never allowed any kind of an update, it makes me wonder if I'd even get the ICS update when it's released on March 15 or shortly thereafter. Of course that's according to the rumor mill and I'm simply referring to that since the SGSII's received their ICS earlier today according to SanFirnware.
So who knows? Again, I thank everyone fir their help and input.
Jim G.
Direct from my Samsung Galaxy Note GT-N7000

[Q] N9005 "No Service" need help to troubleshoot

Hey All,
I got a Note 3 N9005, which supposedly was purchased in UAE.
Currently trying to use it in India, but, the device always says "No Service", with a crossed circle instead of network signal icon on notification bar.
Phone is on 4.2.2 with UGNH1. Below are some observations:
- Phone does NOT ask for any PIN / Unlock Code.
- In Settings > Status.. irrespective of any SIM, or no SIM.. Mobile Network Type = Unknown, Service State= Out of service, Mobile Network State=Disconnected.
- Orig CSC code is displayed as XTC from Phone Info App
- Tried to select a different CSC from CSC Select app.. it changed the boot logo but, network status.. still crossed circle
- IMEI is proper as printed below the battery
- Still i tried ChainFire's RegionLockAway. But, as expected, the method is only for MI7 / MJ1 / MJ3 JB versions. Sadly mine has already crossed and has A2 bootloader. So, no change was observed with CF RegionLockAway. Reverted the cahnges.
- Tried to flash MJ1 / MJ3 binaries from sammobile. As expected the latest bootloader won't allow to downgrade.
- Flashed Omega, but for no luck. Still no service and crossed circle icon.
- Flashed latest CyanogenMod. Though there was no Crossed Circle icon, there was an icon of network signal with zero network.
- Flashed official Lollipop verson to see if any changes.. no luck. Reverted back.
- Installed advanced network info app, network status, neighboring MSC, cells.. etc was shown as none.
No clue how to enable the device's network capabilities (all else like WiFi and other feature work as usual).
It will be a great help if you can guide me through! Please let me know if any other info is required.
Thanks a lot in advance. !!

Purchased in UAE doesn't necessarily it was a UAE phone. Phone Info Samsung from Play Store can tell you where it is from.
What I would do is...
Download the firmware from Sammobile to suit your phone. One fairly common issue is that Hong Kong or Chinese phones get sold into Europe or other markets and their PIT and other partitions are different. So first thing is to go back to scratch.
If you phone IS from where you think, make sure you have the stock firmware for that location and flash the latest version using Odin and Download mode.
Start Odin - v3.09 is best.
To enter DL mode for anything to do with BL or Modem you MUST turn phone off. It is best to remove the battery and wait a while, then put it in and use the Power On+Vol-Down+Home key to get into DL mode, then [plug phone into PC and wait for Odin to notice it is there.
(if Odin doesn't notice it, get the latest Samsung USB drivers for the phone and install them with phone unplugged, then plug in phone and Windows should give a pop-up)
Click on AP in Odin and navigate to where you saved the firmware - note you DL'd a zip but you need the md5 file so use 7zip to unpack the zip.
Click on the md5 file and wait for it to load into Odin.
* [Auto Reboot] and [F.Reset Time] should be the ONLY things ticked.
Click [Start] and wait.
Let phone restart and set it up with your details. Once done see if you have network.

Journyman16 said:
Purchased in UAE doesn't necessarily it was a UAE phone. Phone Info Samsung from Play Store can tell you where it is from.
......
Let phone restart and set it up with your details. Once done see if you have network.
Click to expand...
Click to collapse
Thanks Journyman16 for the quickreply.
I installed the "Phone Info Samsung" app as you mentioned and found the phone's CSC code is XTC! (= Philippines (Open Line))!!
Thanks for the hint. I will download the latest firmware from sammobile for n98005 for XTC and check. Will be back with updates in some time.

maesiva said:
Thanks Journyman16 for the quickreply.
I installed the "Phone Info Samsung" app as you mentioned and found the phone's CSC code is XTC! (= Philippines (Open Line))!!
Thanks for the hint. I will download the latest firmware from sammobile for n98005 for XTC and check. Will be back with updates in some time.
Click to expand...
Click to collapse
Update:
Flashed below 3 stock firmwares from sammobile, each time cleared cache and factory wipe.. still the crossed circle is hopelessly adamant and persistent.
4.4.2 N9005XXUGNH1
4.4.2 N9005XXUGNI4
4.3 N9005XXUDMJ7 (failed to flash, i guess due to current bootloader version A3)
I tried with Odin 3.09.3 & 3.10.6 & 3.07 .... same result.
Any suggestions? please share.. I'm ok to soft brick the phone Recovered from boot loop few times
Any further suggestions? Please share.. Shall i give a try with full wipe (/system/ folder wipe) with TWRP ? Or any other thing ?!

Tried a different sim card ??
Checked APN settings .
Checked you have modem/ baseband via settings .

maesiva said:
Update:
Any suggestions? please share.. I'm ok to soft brick the phone Recovered from boot loop few times
Any further suggestions? Please share.. Shall i give a try with full wipe (/system/ folder wipe) with TWRP ? Or any other thing ?!
Click to expand...
Click to collapse
They are old stock ROMs - how sure are you the phone wasn't updated to the new version of BL? I'm not sure if you're on the new version and then try to downgrade it, which version you will see in Phone Info but check it. There's also a phone # code to use that returns the basics for the phone, but I can't recall if you said you get calls or not and I'm heading for bed. Think the code is something like *#12334#* - google for secret smartphone codes.

JJEgan said:
Tried a different sim card ??
Checked APN settings .
Checked you have modem/ baseband via settings .
Click to expand...
Click to collapse
Hi JJEgan, thanks for your suggestions..
I tried with different SIM, yet no luck.
APN settings.. shows my SIM operator's default settings.
When I search networks Manually.. it searches for a ~10 seconds and returns without any list/error.
Select automatically shows "Automatic registration.." progress continuously for > 5 mins.. i closed manually.
Attached screenshot of Baseband, Modem, CSC versions.
AP: UGNH1
CP: UGNH1
CSC: BGNH1
Baseband: UGNH1
Kernel: 3.4.0-1955971

Journyman16 said:
They are old stock ROMs - how sure are you the phone wasn't updated to the new version of BL? I'm not sure if you're on the new version and then try to downgrade it, which version you will see in Phone Info but check it. There's also a phone # code to use that returns the basics for the phone, but I can't recall if you said you get calls or not and I'm heading for bed. Think the code is something like *#12334#* - google for secret smartphone codes.
Click to expand...
Click to collapse
Yea Journyman16, they seem to be still good old of 4.4.2. Latest must be 5.0. On samobile, for XTC i could see only till 4.4.2. Maybe for this phone version, there are no updates? Not sure.
And, yes, sadly BL is updated to A3. Which I could see in Recovery mode's REV line. (if it was A1, I could have flashed MI7 and tried RegionLockAway.. )
*#1234# gives the below info:
AP: UGNH1
CP: UGNH1
CSC: BGNH1
Any heads up ?!

/system/csc/GLB/system/csc/customer.xml has a line:
<NbNetworkLock>1</NbNetworkLock>
Which ChainFire's RegionLockAway changes to
<NbNetworkLock>0</NbNetworkLock>.. but as mentioned in it's details, the method is compatible only with MI7, MJ1, MJ3 firmwares and i'm on UGNH1 and unable to downgrade
Chainfire said:
Sammy, in their never-ending quest to make sure they've pissed off every single one of their customers at least once, have decided to region lock their latest model devices.
...
Compatible devices
- Galaxy Note 3 SM-N9005 (MI7, MJ1, MJ3 firmwares)
...
Click to expand...
Click to collapse
Any method to downgrade the BL to A1 would help !?

Attached adb logs, if of any use to analyze.
aeroplaemodeoffon.log
boot.log
networksearch.log
shutdown.log

maesiva said:
Attached adb logs, if of any use to analyze.
aeroplaemodeoffon.log
boot.log
networksearch.log
shutdown.log
Click to expand...
Click to collapse
I'd upgrade rather than try to get around the downgrade issues. What Region do you WANT to have? European ones seem to get early release of upgrades - e.g. many LP ROMs are based around the Polish release.
I don't know enough to interpret logs, but my thought would be to find a non-Philippines version (one of the Europe ones perhaps) and find a PIT file for that one. Then go read up on how to safely flash a new PIT. Then flash your preferred firmware and follow the root process etc.
I started with a HK version of S3 - every time I tried to flash a new ROM it failed and bricked my phone. Eventually I found that the PIT file on most Asian phones was different and I flashed PIT, then stock FW for the region I wanted then re-rooted and flashed the custom ROM.
Read many time, flash once, OK? I do not make bricks, nor need them, so I will not accept them delivered to my door...

Journyman16 said:
Read many time, flash once, OK? I do not make bricks, nor need them, so I will not accept them delivered to my door...
Click to expand...
Click to collapse
good one

maesiva said:
good one
Click to expand...
Click to collapse
There's a Euro PIT on the link at This Post - I checked and the dropbox is still valid. It's 4.4.2 so could be just what you need.
Now you probably want an India ROM but I haven't any links for that 0 there's a thread for India users though I think.
What I think might be happening is that different countries use different frequencies and formats for signal. It might be that India's set up simply doesn't work with the modem you've been using and the India ROM will not set up with the Asian PIT set up etc.
But read up on the process first, OK? The more you know about it the better chance you have to recover from anything going wrong.
Also, I presume from your OP that the phone NEVER worked once you got it? Do you know for a fact it worked prior to that? Maybe you're chasing solutions for a faulty hardware issue?

Journyman16 said:
There's a Euro PIT on the link at This Post - I checked and the dropbox is still valid. It's 4.4.2 so could be just what you need.
....
Also, I presume from your OP that the phone NEVER worked once you got it? Do you know for a fact it worked prior to that? Maybe you're chasing solutions for a faulty hardware issue?
Click to expand...
Click to collapse
Hi Journyman16, thanks for the suggestions.. i tried the pit file you referred, but, still no luck. And, if i'm not wrong pit file is all about allocating ROM space for /system & /dbdata and has nothing to deal with the antenna/telephony module, please correct if i'm not right.
About the phone's status yea you're right. It never worked after i received it. But, it was working usually in UAE, as per the info i got. Maybe.. as you suspected.. it might be faulty hardware too.. I don't know.. just exploring the options.. to conclude something..

maesiva said:
And, yes, sadly BL is updated to A3. Which I could see in Recovery mode's REV line. (if it was A1, I could have flashed MI7 and tried RegionLockAway.. )
*#1234# gives the below info:
AP: UGNH1
CP: UGNH1
CSC: BGNH1
Any heads up ?!
Click to expand...
Click to collapse
The only unbranded NH1's seem to be Greece or Netherlands. Netherlands has a 5.0 - maybe DL that and flash in Odin? Greece has a v5.0 but it's branded with (EUR) so I don't know if that's a company or general... I'd go the Netherlands one.
Other than that, I'm not sure - might be time to get the phone checked properly?

Finally.. could trace the root cause.. antenna / receiver chip malfunction. So, it was an hardware issue that had to be replaced at a cost at service center.
Summary: If network icon is crossed circle, its not a good sign !! Thanks
Journyman16 said:
Journyman16
Click to expand...
Click to collapse
,
JJEgan said:
JJEgan
Click to expand...
Click to collapse
!!

I need your help. I have a problem after flashing lollipop firmware on samsung galaxy note 3, sm-n900s the signal or the device has no service. Any modem use to flash?
Please, I need your help xda devs as soon as possible. Really appreciated. Thank you.

Naedean said:
I need your help. I have a problem after flashing lollipop firmware on samsung galaxy note 3, sm-n900s the signal or the device has no service. Any modem use to flash?
Please, I need your help xda devs as soon as possible. Really appreciated. Thank you.
Click to expand...
Click to collapse
Please search and read before posting.Multiple identical questions posted day after day .
Usual is wrong IMEI .
Sent from my SM-N930F using XDA-Developers Legacy app

"Warning: Your phone does not have active CSC code" - Reasons?

Hi all,
Last week I bought a Samsung Galaxy S7 Edge through ebay. Everything has been great until it came time to plug in my recently purchased Gear VR which is coming up with a network error. After some searching for solutions, it appears that my phone isn't set to a specific country (so I guess it doesn't know what software to install). I have installed "Phone INFO" which shows as per the attached screenshot.
My question is what could have caused this? If I was to reinstall firmware or attempt to add a CSC could it cause issues? Is it likely the previous owner was just a tinkerer? Am worried If I add a CSC my phone may become blocked or something but If I don't I can't use my Gear VR
Any help or advice greatfully received.

what software version is on your phone ?
It looks like someone may have have upgraded your phone to nougat beta or a custom ropm. Nougat beta does not have a csc associated with it. You need to flash one after installing.nougat beta.
I suggest you ddownload one for your provider from samfirmware or contact the sellor and try to find out what was done to the phone.

ozmo said:
Hi all,
Last week I bought a Samsung Galaxy S7 Edge through ebay. Everything has been great until it came time to plug in my recently purchased Gear VR which is coming up with a network error. After some searching for solutions, it appears that my phone isn't set to a specific country (so I guess it doesn't know what software to install). I have installed "Phone INFO" which shows as per the attached screenshot.
My question is what could have caused this? If I was to reinstall firmware or attempt to add a CSC could it cause issues? Is it likely the previous owner was just a tinkerer? Am worried If I add a CSC my phone may become blocked or something but If I don't I can't use my Gear VR
Any help or advice greatfully received.
Click to expand...
Click to collapse
The previous owner has probably installed a custom rom and that's why the csc is missing. If you don't have root, then I would recommend for you download the stock firmware and flash it with Odin and that should fix your problem.

Cosmic Blue said:
what software version is on your phone ?
It looks like someone may have have upgraded your phone to nougat beta or a custom ropm. Nougat beta does not have a csc associated with it. You need to flash one after installing.nougat beta.
I suggest you ddownload one for your provider from samfirmware or contact the sellor and try to find out what was done to the phone.
Click to expand...
Click to collapse
Please see attached for the software info, does this looks like the beta? Thanks for the replies both, I'll look into this Odin and see what it's all about. I haven't done anything with firmwares for years, not since messing about with Nitdroid on my old Nokia N9, hopefully can still get to grips with it all!

ozmo said:
Please see attached for the software info, does this looks like the beta? Thanks for the replies both, I'll look into this Odin and see what it's all about. I haven't done anything with firmwares for years, not since messing about with Nitdroid on my old Nokia N9, hopefully can still get to grips with it all!
Click to expand...
Click to collapse
Nope. not nougat
You can download full rom and flash through odin. Make sure you flash all 4 files (bl,ap,modem and CSC).
Here's what I thought happened.
Previous owner root phone(cause knox 0x1)
and probably update the firmware by flashing rom though odin or use custom rom. But he/she didn't know how to flash the full firmware though odin properly(or just don't want to. idk) because of the old modem(baseband APEQ) but new rom file(build APG3) and also missing CSC.
These probably mean he/she flashes only AP files(rom) in odin and ignore the other 2 files(modem and CSC) and might also bl file(bootloader).
Sent from my SM-G935F using Tapatalk

NonXtreme said:
Nope. not nougat
You can download full rom and flash through odin. Make sure you flash all 4 files (bl,ap,modem and CSC).
Here's what I thought happened.
Previous owner root phone(cause knox 0x1)
and probably update the firmware by flashing rom though odin or use custom rom. But he/she didn't know how to flash the full firmware though odin properly(or just don't want to. idk) because of the old modem(baseband APEQ) but new rom file(build APG3) and also missing CSC.
These probably mean he/she flashes only AP files(rom) in odin and ignore the other 2 files(modem and CSC) and might also bl file(bootloader).
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
Yeah that sounds very plausible, just can't imagine why they would root it and update firmware but not do it properly, every guide I've read directs you to use the appropriate CSC for your country. Well I've got Odin running as we speak, so fingers crossed I can get this working and that I'll be testing out the VR as soon as possible! Does put me off buying second hand in future, but I guess on the plus side at least I don't have a warranty to worry about and can have some fun with different firmware.

some small 3 rd party providers or regional area have csc which are not commonly available, so when you upgrade you would not want to touch the csc.
The sim you are using may not recognize the csc the previous sim card was using that is why it is giving you there error message.

Could be that, guess we'll never know.
As mentioned above I have flashed with the latest firmware and updated the CSC, fortunately it's all working now so thanks for all the support. My refurbishment check now shows as attached.

OTA android 7 update for g935fd not working

Hey guys,
The OTA update for android 7 has come up in my s7 edge duos. I have tried downloading it twice........it gets to 100% and says there an error and that it's the wrong version.
Not sure what to do.........any ideas

Download and flash the rom through odin.
Did you ever flash a different rom? Which brand is respectively CSC has your phone?

Never flashed another rom........bought the phone off amazon.com............it's zn international version, but looks like the supplier got them from UAE.

r374rd said:
Never flashed another rom........bought the phone off amazon.com............it's zn international version, but looks like the supplier got them from UAE.
Click to expand...
Click to collapse
the supplier may have gotten from UAE but the csc may not be from there.
you can try downloading the Rom from samfirmware and flashing that way.

Thanx for the reply guys, how can I find out the CSC on the phone? Also if I flash with odin, Will that erase all the data on the phone? And will it trip the knox?
Why is it that the update doesn't work? How come the software on my phone doesn't match the update it's downloading? Is it something the supplier/seller has done to the phone? Like modify the software?
Thanx guys

Install Phone INFO ★Samsung★ and you get all necessary information.
If you flash with Odin Know won't be triggered. You can keep your data with the three following requirements:
- The firmware you flash must have the CSC included you use at the moment.
- You need to use HOME_CSC file instead of CSC file.
- You may not tick re-partition.
Keep in mind to only flash firmwares designed for the Exynos variant.
Sellers on Amazon sometimes get phones from a different market and flash then a firmware fitting your market. This is rather a replacement than a modification (since the whole system is still official) and Knox is not triggered. However, one effect is that OTA may not work or gives "phantom" update notices. There's no restriction aside of that and you can just use Odin to remain updated.
You can post screens from all pages of the app I mentioned and we can see what's going on.

Hey Andiling, really appreciate your help pal. Here are some pictures you requested. Thank you