Related
My phone (Leo512) keep rebooting after I installed the sense 2.1/3.0 rom..
I installed it by this way:
1)Install MAGLDR, Radio 2.15.50.14, ClockWorkMod Recovery 250M.
2)Go to MAGLDR main menu and choose AD Recovery, and go to choose zip to install..wait for install complete
3)After that, the splash screen start repeating..
Did I missed any steps?.
Can anyone help me?
Did you do a full wipe and wipe dalvik cache?
Sent from my HD2 using XDA app
elliottg61 said:
Did you do a full wipe and wipe dalvik cache?
Sent from my HD2 using XDA app
Click to expand...
Click to collapse
I tried, but still the same thing occur.
Heeeeellllppp mee...my phone is still repeating the splash screen..=(
garylaw said:
Heeeeellllppp mee...my phone is still repeating the splash screen..=(
Click to expand...
Click to collapse
Might help if you actually tell us what rom it is...
beston94 said:
Might help if you actually tell us what rom it is...
Click to expand...
Click to collapse
[24 JULY][SENSE3.0] Pyramid HTC WWE 1.35.401.1 - Real 3D [V1.7 app2sd][RAF 1.9GB]
This ROM.. http://forum.xda-developers.com/showthread.php?t=1075703
i think you've flashed tmous rom instead of eu rom. eu rom needs 180 m partition and sd-ext partition.
mutil said:
i think you've flashed tmous rom instead of eu rom. eu rom needs 180 m partition and sd-ext partition.
Click to expand...
Click to collapse
So what should I do now?
I already partition my sd with 512M and Swap size is 256..
You have to partition your nand also.in the first page of nand development there is ksubedi s hd2 nand tool kit,download and setup it in pc.then connect your hd2 to pc,in mgldr menu choose usb flasher,then in toolkit choose in mgldr repartition size custom and cache size 5, then at the bottom click repartition,a window will open write 180 and ok. When partitioning finishes flash the rom.btw 512mb sd-ext size may not be enough for the chosen rom you better use 1.5-2 gb,and reduce swap to a lower value or to 0.
Sent from my HTC HD2 using XDA Premium App
mutil said:
You have to partition your nand also.in the first page of nand development there is ksubedi s hd2 nand tool kit,download and setup it in pc.then connect your hd2 to pc,in mgldr menu choose usb flasher,then in toolkit choose in mgldr repartition size custom and cache size 5, then at the bottom click repartition,a window will open write 180 and ok. When partitioning finishes flash the rom.btw 512mb sd-ext size may not be enough for the chosen rom you better use 1.5-2 gb,and reduce swap to a lower value or to 0.
Sent from my HTC HD2 using XDA Premium App
Click to expand...
Click to collapse
Thank you!!THANK YOU VERY MUCHHH..
I finally make it..THANKS..
My HD2 wont successively boot into android. I've tried many Different Roms sense and non sense, but still wont work. I either get get a (status 0) error in CWM or it says it installs but i reboot and choose to boot nand via MAGLDR and get the error "no boot sources" I'm I doing something wrong? I wipe my system before each install and portion it correctly. I had it booting Andriod Cm7 via Haret and Cdlar or what ever. I'm stuck Please Help out
Renegade99 said:
My HD2 wont successively boot into android. I've tried many Different Roms sense and non sense, but still wont work. I either get get a (status 0) error in CWM or it says it installs but i reboot and choose to boot nand via MAGLDR and get the error "no boot sources" I'm I doing something wrong? I wipe my system before each install and portion it correctly. I had it booting Andriod Cm7 via Haret and Cdlar or what ever. I'm stuck Please Help out
Click to expand...
Click to collapse
What are your partition sizes? Particularily sense roms require a large partition. If your partition isn't large enough for the system, it will not boot.
Edit: Sorry I just reread where you said you partition is correctly.
Make sure your downloading the correct rom ?? Sorry I'm not much help on this.
Yeah, i partitioned it right 1024 and 0 swap, Sense roms give me a status 0 error and non sense give me that no boot sources error on MAGLDR
Did u tried cLK ? Did u did full install proces ?
Cjovecje! said:
Did u tried cLK ? Did u did full install proces ?
Click to expand...
Click to collapse
I dont have that installed? isnt that just Clockwork mod
every type of isntall has its steps. Did u followed exactly ?
Yeah...wipe, partition SD, install via zip CWM or at least that's what I do
Sent from my HTC HD2 using XDA App
Did u did task29 ?
Is this U´r first Try to flash Rom´s?
Renegade99 said:
Yeah, i partitioned it right 1024 and 0 swap, Sense roms give me a status 0 error and non sense give me that no boot sources error on MAGLDR
Click to expand...
Click to collapse
I think what he meant was is the system partition correct? Not SD-EXT.
Nigeldg said:
I think what he meant was is the system partition correct? Not SD-EXT.
Click to expand...
Click to collapse
Yea that's exactly what I meant if your system isn't partitioned correctly there will be boot problems every time. Search for "HD2 Toolkit" it makes it so much easier.
Task 29
Then install magldr or clk with the correct system partitions.*most important part*
Install clockwork mod
Flash your rom
Reboot and it should start fine.
Sent from my HD2 using xda premium
I have two HD2s this one is running off NAND Hard Droid 2. I did all the steps I did with this one. Flashed Hspl3 choose spl 2.08 after that was done flashed magldr then installed CWM via SD and portitioned the SD? Not sure about system. Swap 0 as it said in instructions. Flashed zip and I get the errors. Could someone tell how to task 29. Isn't that a nand wipe?
Sent from my HTC HD2 using XDA App
Needs that tool box thing xD
Sent from my HTC HD2 using XDA App
I'm on my phone so I can't give you the specific link. If you go to the guide in my signature I have a link to hd2 toolkit. You need this program. It will solve your problems because your system partitions are not correct. Swap and things like that matters but its on your SD card. Your problem is with the internal partitions.
Download the program I promise its worth it. If you don't like it delete it but at least try it so you can boot and experience android on nand.
If you want to use clk my guide might help you with that to.
Sent from my HD2 using xda premium
Task 29 deletes all data on your phone but not SD card.
Sent from my HD2 using xda premium
Alright I'll try it later when I'm on the computer
Sent from my HTC HD2 using XDA App
I don't know if I can ask my question in this topic, but I think partitioning is part of my issue. On my HD2, I installed Ice Cream Sandwich Beta7. Used Magdlr. At first it won't booit into android either, but that was because I used the recovery_1.3400MB. Later I used the 250MB.
But then I got problems with installing apps: Internal space was insufficient. So I read this topic:http://forum.xda-developers.com/showthread.php?p=20577589 See page 12.
So I followed these steps:
Backup your SD card data (and prefferably nandroid backup your rom) and use recovery to repartition your SD.
Go to recovery, advanced, Partition SD Card
Partitioning to 1024 works wel, but 2048 won't. I don't know why, cause it's a 2GB sd card. But after partitioning, Android isn't using the space on the sd-card.
I can manually copy apps to the SD card, but it still gives errors about insufficient internal memory......
2gb=2000mb that's a problem if only using a 2gb for partitioning over 2gigs xD
Sent from my HTC HD2 using XDA App
Renegade99 said:
2gb=2000mb that's a problem if only using a 2gb for partitioning over 2gigs xD
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Actually 2GB = 2048 MB...
But still the question is; when I choose 1024, why doesn't android use this partition as extra storage?? So why am I getting errors of insufficient space?
Check your properties on the SD because they usually lie to you about how much storage it is. Its rarely plain out too gigs
Sent from my HTC HD2 using XDA App
people who does not understand the installation method of native sd please follow these steps
create ext 4 partition of minimum 512mb
1.unzip the recovery zip file from this link (http://goo.im/devs/Xylograph/Various/Recoveries) copy zimage & intrid file from recovery and paste these files on root of your sd card
2.go to magldr menu and 2 nd option (ad sd) then press call button
3.then it will take you to recovery mode
4.flash the rom(paranoid 1.99 or 2)
5.after that your sd card will have folder called nativesd click on folder inside there will be one more folder pa
6.copy zimage & intrid files
7. before that delete the zimage & intrid files of recovery from root of your sd card
8.paste the zimage & intrid files of pa
9.reboot
THANKS TO SECURECRT,XYLOGRAPH,PHO3NIX,COTULLA,TYTUNG
Can I make a ext4 partition on my sdcard w/o PC as I've currently a company laptop only which doesn't allow to install any partition tool??
Cheers.....LinChina
LinChina said:
Can I make a ext4 partition on my sdcard w/o PC as I've currently a company laptop only which doesn't allow to install any partition tool??
Cheers.....LinChina
Click to expand...
Click to collapse
you can use PartitionWizard to make ext4 partition on sd card
anhnq said:
you can use PartitionWizard to make ext4 partition on sd card
Click to expand...
Click to collapse
he can't install that warez in his PC/ NB.
@LinChina
i think recovery(CWM) only makes EXT3 but i'm not really sure about that, your best bet is use a pc that can have those warez on it
or this, if you can place & unzip the file in your NB
3a Use the provided 4EXT recovery (NAND or SD version) to create the partitions and format them.
Click to expand...
Click to collapse
NativeSD Dual Installer v2
http://forum.xda-developers.com/showpost.php?p=31110719&postcount=2
Now I know ..but the first post is for people who don't have magldr or android on nand....SD recovery is not needed when you have cwm recovery inbuilt in magldr
Easy steps
1. Use minitool partition manager on PC to make sdext4 partition (cwm makes only ext3 ..so is not useful)
2. Copy your favorite native SD rom zip folder to SD card
3. In magldr ..go to ad recovery..install zip from SD...then follow instructions ..default path install is SD ext
4. Reboot
Enjoy
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Hi everyone, it only looks that I'm a new user, it's because i've never posted anything before. I have Hd2 for almost 2 years from now and like 1,5 year being passive user on XDA. Anyway I do have problems that i can't manage myself. OP asked a dumb question, only if he has Android Nand or Windows Mobile, however... nobody ever tried making it work with WP7? I've been working on it few hours and don't have a clue how to do it. I've deleted my FAT32 partition and split it into Fat32+Ext4. If EXT is logical, WPH boots and show "Storage Card not working", but if it's primary it doesn't even boot. Is there anyway to solve this thing? Any help much appreciated, thanks.
maykel. said:
Hi everyone, it only looks that I'm a new user, it's because i've never posted anything before. I have Hd2 for almost 2 years from now and like 1,5 year being passive user on XDA. Anyway I do have problems that i can't manage myself. OP asked a dumb question, only if he has Android Nand or Windows Mobile, however... nobody ever tried making it work with WP7? I've been working on it few hours and don't have a clue how to do it. I've deleted my FAT32 partition and split it into Fat32+Ext4. If EXT is logical, WPH boots and show "Storage Card not working", but if it's primary it doesn't even boot. Is there anyway to solve this thing? Any help much appreciated, thanks.
Click to expand...
Click to collapse
You can use the same link as 2 post before yours and check the section about "NativeSD Installation for Magldr NAND Android & WP7 users".
http://forum.xda-developers.com/showpost.php?p=31110719&postcount=2
@mengfei.....just downloaded and will try and feedback if succeded.......hopefully :laugh:
Edit1: Thanks a lot mengfei.....EXT4 created....now will try one of the natives sd
Edit2: "Aokp Nightly 04-09-2012" run sooooooooooo fast!!!!!
Cheers.....LinChina
^ Glad to know you got it working :highfive:
I like to try nativeSD Android roms, but with MAGLdr it runs into a deadlock as MAGLdr does not support WinMo 6.5.
Is there a way to use NativeSD? even better with multiboot?
Hi at all,
today I installed ACA NativeSD on partition EXT4 into my sd card. I copy and paste the 2, zImage, intrid file which I fund in NativeSD/ACA folder, into root of my sd card. I rebooted and when I choose Boot AS SD in MAGLDR the ROM do not boot.
What I do wrong?
eclyptos said:
Hi at all,
today I installed ACA NativeSD on partition EXT4 into my sd card. I copy and paste the 2, zImage, intrid file which I fund in NativeSD/ACA folder, into root of my sd card. I rebooted and when I choose Boot AS SD in MAGLDR the ROM do not boot.
What I do wrong?
Click to expand...
Click to collapse
you must copy the 2 files from "<SDCARD>/NativeSD/ACA" to "<SDCARD>/NativeSD" (and not to "<SDCARD>/" )
Sent from my HTC HD2 using xda app-developers app
o82239 said:
you must copy the 2 files from "<SDCARD>/NativeSD/ACA" to "<SDCARD>/NativeSD" (and not to "<SDCARD>/" )
Sent from my HTC HD2 using xda app-developers app
Click to expand...
Click to collapse
but I got already 2 file in there (zImage & intrid), do I have to relace them? Anyway if I try to set up the AD SD Dir from Magldr I do not see the NativeSD folder so will not boot anyway. I think I have problems with 4EXT but I am not sure.
eclyptos said:
but I got already 2 file in there (zImage & intrid), do I have to relace them? Anyway if I try to set up the AD SD Dir from Magldr I do not see the NativeSD folder so will not boot anyway. I think I have problems with 4EXT but I am not sure.
Click to expand...
Click to collapse
yes, you must replace the 2 files...
why you can't see the folder: check on a PC, if the folder has hidden attribute... or try to create a new folder, copy all files from the old to the new, delete old and rename new folder...
Sent from my HTC HD2 using xda app-developers app
o82239 said:
yes, you must replace the 2 files...
why you can't see the folder: check on a PC, if the folder has hidden attribute... or try to create a new folder, copy all files from the old to the new, delete old and rename new folder...
Sent from my HTC HD2 using xda app-developers app
Click to expand...
Click to collapse
ok, I will replace them.
Why I do not see the folder? I ask my self the same question and I don't know why, anyway my card is recognized and the folder is there, if will be hidden I will not see the folders, I also put different card into my hd2 with different folders and still the same. I think the 4EXT recovery make something wrong with partitions or I do.
LinChina said:
Can I make a ext4 partition on my sdcard w/o PC as I've currently a company laptop only which doesn't allow to install any partition tool??
Cheers.....LinChina
Click to expand...
Click to collapse
you may partition your sd card by this way
backup your data first, reboot into recovery, choose option 8. ad recovery => advance => partition sd card, choose your own option and wait
hi dear friends .. maybe this has been mentioned befor but really i couldnt understand how to do it .
i have an 8 gb sandisk micro sd card. am aware how to boot one native sd rom on it by copying its zip folder and the recovery folder to my fat partition ( after creating 2nd ext4 partition) and installing the rom through the recovery and aroma installer.
my question is: i want a simple explanation how to put more native sd roms on that sd card a be able to boot any one of them when i wish?
am sorry if this sounds silly.. but really i couldnt do it . thanks in advance .
Sent from my HD2 using xda app-developers app
If 6GB is enough for your storage, then do 2GB EXT4 partition, install first NativeSD ROM, then if you want a second NativeSD ROM, just flash the second one the same way as you did the first, then load the NativeSD Multi Boot application when booted into Android and press Switch Rom, click on the ROM you want eg. NexusHD2/PAC/CMTight or whatever you want and then reboot.
you just flash the next NativeSD to ext4 & use the NativeSDBootV7 to select which ROM you want to boot next. check out the link below, it might help.
is it that simple! just re-flash the 2nd rom to the same fat32 partition without doing extra ext4 partitions.. then boot into it! ok will give it a try soon. thanks so much
Sent from my HD2 using xda app-developers app
mahir555 said:
is it that simple! just re-flash the 2nd rom to the same fat32 partition without doing extra ext4 partitions.. then boot into it! ok will give it a try soon. thanks so much
Click to expand...
Click to collapse
The EXT4 partition is for the ROM's, the FAT32 partition is for basically the user data that the applications create example. if you're using Sygic Maps, it'll store the map the data on the FAT32 partition.
Just make sure you're using NativeSD not Nand when in the Aroma Installer.
thanks gays.. it worked fine
now is there an app for wm that lunches android directly after boot whithout oppening the file explorer inside wm ?
Sent from my HD2 using xda app-developers app
mahir555 said:
thanks gays.. it worked fine
now is there an app for wm that lunches android directly after boot whithout oppening the file explorer inside wm ?
Sent from my HD2 using xda app-developers app
Click to expand...
Click to collapse
Have you tried this? Multiple Android-Starter
thanks parker but i was looking for this tool
www.forum.xda-developers.com/showthread.php?t=859776
now i can boot android automatically ftom wm startup
Sent from my HD2 using xda app-developers app
Ah my bad misread the question.
never mind.. u already helped me in my main question so much. THANKS
Sent from my HD2 using xda app-developers app
parker09 said:
If 6GB is enough for your storage, then do 2GB EXT4 partition, install first NativeSD ROM, then if you want a second NativeSD ROM, just flash the second one the same way as you did the first, then load the NativeSD Multi Boot application when booted into Android and press Switch Rom, click on the ROM you want eg. NexusHD2/PAC/CMTight or whatever you want and then reboot.
Click to expand...
Click to collapse
Do I have to rename the old NativeSD folder before flashing the new one? Thx :good:
AW: booting multiple native sd roms ?
vladshois said:
Do I have to rename the old NativeSD folder before flashing the new one? Thx :good:
Click to expand...
Click to collapse
No.
Best regards
Getrid…
Sent from my HTC HD2 using xda app-developers app
Hello, I want to have ICS on my HD2, I followed the video tutoral for installing but at the end I can only see the HTC on a white ground.
Here are my steps:
- format of sd with SD Formatter,
- with MiniTool sd formatted in FAT32 primary (25 GB) and ext4 primary (4 GB),
- copied extracted recovery 4ext 2.2.7 on sd,
- copied ROM on sd,
card into HD2,
- Tookit: wipe all data and install MAGLDR 1.13,
in MAGLDR go to 10 Services, 1 Boot Services, 3 AD Direction, choosing ext4, back to 2 Boot AD SD,
then install zip from sd, choose zip, ROM.
Aroma installer: choose native sd = installing. After last NEXT back to MAGLDR to 10 Services, 1 Boot Settings, 3 AD SD Direction, choose native sd, back to 2 AD SD direction.
The boot process looks good up to the HTC on white ground.
I think I´ve made somewhere a mistake but I dont know where. So please help.
Your mammaonecat
I have same problem before. Finally, I use recovery 4ext to format my sd instead of using mini tool. Then problem solved.
No boot after flashing Nexus HD2 ICS.CM9-HWA v. 2.9a native SD
Thanks cswong, I have tried the partition inside 4ext with the same result. I´ll try it once more. But another question: do I have to go to "fix permissions" in MAGLDR/advanced or is it enough to take point 2 "Boot AD SD"?
Yours mamaonecat
no mistake you can try using recoery to format sd ext
Sent from my HTC HD2 using xda app-developers app
mammaonecat said:
Thanks cswong, I have tried the partition inside 4ext with the same result. I´ll try it once more. But another question: do I have to go to "fix permissions" in MAGLDR/advanced or is it enough to take point 2 "Boot AD SD"?
Yours mamaonecat
Click to expand...
Click to collapse
It should not need to "fix permissions".
You mean that you only get to the white screen with green HTC letters? You don't even get to magldr when booting normally? Then I don't think it's a problem with sd card, and you could try system repartition. From toolkit, choose magldr repartition, on the phone choose AD recovery in magldr.
This also reinstalls recovery.
Sent from my NexusHD2 using xda app-developers app
No boot after flashing Nexus HD2 ICS.CM9-HWA v. 2.9a native SD
Thanks jvzijp. I thought that I don´t need a MAGLDR repartition for installing as native sd. I think I give it a try later on. I think there are too many video examples for flashing and that confuses.
Yesterday evening I´ve installed the ROM as NAND with MAGLDR repartition, with DAF.exe without partitioning the sd card. And as I can see most of it works. And I have a free space of internal memory of about 650MB, thats enough for me.
BUT: I have a weak WiFi-connection.
I´ve learned from other threads that most of the roms of ICS and JB have this problem. Is there a solution possible? I´ve looked at Play Google but there are so many apps. :silly:
I don't know whether repartition is needed for nativesd but worth a shot..
You'll probably not run out of memory soon. If that is the case, I recommend dataonext option.
I haven't noticed wifi problems, only on tytung's jb 4.2
Sent from my NexusHD2 using xda app-developers app
jvzijp said:
I don't know whether repartition is needed for nativesd but worth a shot..
You'll probably not run out of memory soon. If that is the case, I recommend dataonext option.
I haven't noticed wifi problems, only on tytung's jb 4.2
Sent from my NexusHD2 using xda app-developers app
Click to expand...
Click to collapse
wifi is work fine on tytung jb 4.2，i am using daily
Sent from my NexusHD2 using xda app-developers app
mammaonecat said:
Hello, I want to have ICS on my HD2, I followed the video tutoral for installing but at the end I can only see the HTC on a white ground.
Here are my steps:
- format of sd with SD Formatter,
- with MiniTool sd formatted in FAT32 primary (25 GB) and ext4 primary (4 GB),
- copied extracted recovery 4ext 2.2.7 on sd,
- copied ROM on sd,
card into HD2,
- Tookit: wipe all data and install MAGLDR 1.13,
in MAGLDR go to 10 Services, 1 Boot Services, 3 AD Direction, choosing ext4, back to 2 Boot AD SD,
then install zip from sd, choose zip, ROM.
Aroma installer: choose native sd = installing. After last NEXT back to MAGLDR to 10 Services, 1 Boot Settings, 3 AD SD Direction, choose native sd, back to 2 AD SD direction.
The boot process looks good up to the HTC on white ground.
I think I´ve made somewhere a mistake but I dont know where. So please help.
Your mammaonecat
Click to expand...
Click to collapse
Some tips may helpful for you:
Minitool works;
Some sdcard will not work, try another one;
Tytung's NexusHD2 ROMs are the most stable.