I have opened my Blade so as to clean the dust in the screen, and after closing it like always and switching it on, the touch screen doesn't work.
Little do I know about hardware, but I'd say that the connector between the screen and the terminal is what should be harmed, but apparently it is like always.
Thank you very much in advance, I hope to get my Blade back.
Related
Hello,
Big problem again, my touch screen becomes unresponsive every other app I open. This is very annoying when opening the phone dialer. When this happens I have to open the keyboard and hit the start button then close it and it sometimes is able to power through this problem. Is this caused because of my processor speed? Will omap clock help? Or is the screen going out?
Thanks for your help.
May have fixed issue
Sorry to be taking up space on this board, for the second time I believe that I have fixed my own problem (opperator error) . I bought a snap on plastic housing to protect the phone from scratches. After driving myself nuts with this touch screen problem, I thought I wonder if it has something to do with the covering that I put on it. Upon removal of this the touch screen is back to its responsive self, unsure what the problem was with the snap on casing but I did resolve this issue.
Thanks
Hi,
Recently ive repaired a HTC Universal, put it back together as best as i could.
Now when i do touch the screen with a stylus, the screen has funny colours behind it. It kind of like when you touch/ prod your Computer LCD. It only happens when theres pressure on the screen so its not really a huge problem. The touch screen is definately there cause when i tap the screen it responds (e.g i tap start and the menu pops down).
If its normal then i can take it, but if its not im complaining to the ebay seller.
This doesent happen when i put any form of pressure on my HTC magician LCD, so im curious.
Let me know what happens with your universal
Cheers,
Whitemoo.
This is not normal behaviour of any touchscreen device!!
hmmm... well i just looked at the broken lcd screen, and even though the LCD itself is shattered, the touch screen is in perfect nick.
I put pressure on the touch screen and couldnt see any of the symptoms i saw on my current LCD
You guys recon i should swap the touch screen over? either way im complaining to the sellers, DODGY.
whitemoo.
from my knowledge, im pretty sure its normal. it happens sometimes on my 9000 so yeahh....
Well, plain and simple is that my touchscreen doesn't response to any touch reponse but the screen is working and everything else
I recently bought a white G1 housing kit on ebay and decided to take the risk of opening up my G1 to replace the housing of my black G1 to the white one, but turns out the white case for the screen / menu buttons arent correct so i scraped those and just changed the keyboard and menu button keys to white and put everything back together properly and exam each part and etc.
so i put everything back together and turn on the g1 everything works fine but the touchscreen doesn't work, is there anyway i can fix this?
life is hard using the G1 without a working touchscreen lol
thanks again and i don't think my screen is defective just wondering why it doesn't reponse to my touch
thanks
Once I was walking around in the heat with my G1 in my BDU pocket for like 4 hours, and it obviously got really humid in my pocket, and my touchscreen stopped responding. I let the phone just sit off for a while and after about an hour sitting in my room, it started working again. But I've had several instances where the touch screen has been less responsive/not responsive.
My guess based off my experience would be that some ambient moisture may have gotten into the phone when you opened it up. How long has it been since you put it back together?
Any update on this?
you said you had 2 g1s, right? so take the phone apart again and replace the touch screen.
the touch screen is separate from the LCD, so that wont affect it.
Hello, I was wondering if anyone can help me. My touch screen broke today and I received a text message and have 3 numbers which I need which were not synced before the damage which I now cannot get access too. The phone boots fine but the only buttons that work are the volume, power and reset.
This phone cannot be sent back to the manufacturer as the break was entirely my own fault.
When you plug the phone into any computer it defaults to the "disk drive" option so can only access sd card data.
I hope there is some way I can get the important data off it?
Thanks!
Fixed for long enough anyway!
I assume that no one has any idea about this one. I have managed a quick fix and I hope it can help others.
Essentially my screen looked like it had a REALLY small amount of liquid between the top peice of plastic (the bit that you actually touch) and what I would assume is the digitizer. After a few days the whole screen looked a little shiny and the touch screen and soft keys did not work.
The way i fixed this was to get a thin pen knife and slide it around the edge of the screen, between the two pieces of plastic along one side of the screen.
After this the screen worked again just as it did before.
I suspect that there was already a small hole/gap allowing condensation to build up between the screen and the digitizer.
I hope this helps someone.
I've searched a good bit and wasn't able to find any information regarding the exact problem I'm having.
Bought a used G6 for starters
No water damage indicated by the sticker
The phone works great on the home screen and app drawer
I turned on dev mode to show touches
When you're in the camera it will stop responding to touches, you can still take pictures using the side buttons. The screen will become responsive again after a couple minutes. This whole time you can take pictures and the screen is functioning just not responding to touch
This happens also when you're loading web pages, even a Google search the screen will stop responding to touch and then eventually start responding again for a short while till you load another page or start moving around the page too quickly it seems. However again the screen is functioning, video previews are playing, just no response to touch.
Loading a game like Asphalt 8 the phone doesn't respond to touches until a couple minutes after the game has been fully loaded.
Even after a hard reset/factory reset the screen will sometimes be unresponsive upon the initial welcome/setup screen and then it will become responsive and you can go through the whole setup without an issue.
Any insight? Any suggestions? If I can't figure it out I'll just get rid of it but it's in great condition a shame it just doesn't function properly.
Thanks in advance!
Looks like some sort of hardware issue...
But before you start to worry...
This might sound like a stupid question but have you tried cleaning your screen with some cleaning solutions?
Sometimes dust mixed with dried sweat can cause severe touch responsiveness issues even if the screen looks like it's clean.
This is an older thread, but maybe I can help someone.
I replaced a touchscreen on a LG G6 and saw that the touchscreen did not work if the back cover was not mounted correctly and the data transfer between the phone and the fingerprint sensor was interrupted. This may be a common problem for users because the connector is small and the back cover is attached with a double-sided tape nearby this connector. It seems that the touch screen is disabled by the phone software without the back cover.
MaBaGeMiFlo said:
This is an older thread, but maybe I can help someone.
I replaced a touchscreen on a LG G6 and saw that the touchscreen did not work if the back cover was not mounted correctly and the data transfer between the phone and the fingerprint sensor was interrupted. This may be a common problem for users because the connector is small and the back cover is attached with a double-sided tape nearby this connector. It seems that the touch screen is disabled by the phone software without the back cover.
Click to expand...
Click to collapse
Thank you so much for this comment!
My gf phone had problems lagging and becoming insensitive to touch, the problem got worse and worse, almost never responding anymore. Performed a factory reset etc, didn't help.
After reading your comment I tried pushing on the back cover while swiping. Now I'm able to revive the phone after pushing hard on the top and bottom left corners, of the back cover.
Thanks a mille !
Lg g6 has back panel from glass and under it you have contact for fingerprint sensor.Somehow if the back panel is loose it can cause touch fail,and you cant use the device touch function!
--->FIX:
So you will have to turn screen off using back button,and then try to press back glass on left and right side of the camera lens !
Then simultaneously press the power button and try to use the touch .
If it does not work tru again around camera lens and turn off screen each time you press the back glass!
For me it worked !