Related
I seem to be having problems tethering my A101 to my HTC Touch HD.
Bluetooth seems hit and miss. Any suggestions on correct procedure.
I also have a little app on my phone for establishing it as a wifi router. The app is wmwifirouter. While my lap top see's it fine the A101 just doesnt see it. Anyone managed to ge their A101 to tether to a wifi type connection their WM phone?
i'm having problem with it as well ... the A101 to my SE x10i ... the bluetooth can "see" the mobile but when it cannot pair ... this is plain stupid!!
i've tried to contact the Archos Support but no solutions as yet.
I tether my HTC Evo to my Archos 70 IT with zero issues. My Evo is rooted and I run the "Wireless Tether" app in the market (their website). It starts an ad-hoc WiFi access point that the tablet can connect to. I've never had any issues. The app supposedly works over bluetooth as well but I've never tried it.
I'm in the exact same boat as you airnike, except the issue is tether to my BlackBerry Bold 9780. I found a thread (listed below) that seems to offer me the possibility of getting my connection up and running - since it seems that it was a problem in the Archos firmware in the first place, maybe you can solve it by following the thread.
Because I am so new I cannot just post the URL, so here it is in a conveluted fashion.
h t t p ://forum.archosfans.com/viewtopic.php?f=63&t=46116
Stock Archos devices don't support ad-hoc networking, only infrastructure. Wireless Tether from the market supports ad-hoc and infrastructure mode. Some phones support infrastructure mode and some do not. If your phone does, you are lucky and it may work. There is a list of supported devices on the Wireless Tether website. There are also several threads on here about tethering and ad-hoc networking.
Tethering Blackberry is another problem, I think I read somewhere it was resolved now, but you need to type in a script in terminal.
Tethering Windows Mobile should be very easy. I always tether bluetooth from my Samsung i8000 to my 101. I never used wifi though as I reckon bluetooth is more battery friendly and speed is acceptable. What exactly is your tethering problem? what do you mean hit or miss? I've been consistently able to tether via bluetooth on my WM phone.
I have had some trouble tethering my Touch HD to my "101" as well - but finally this seems solved.
After pairing both devices, I found that I need to activate Bluetooth on both, then establish internet connection on the "HD" - and after that my "101" will tether fine.
The only strange thing I am a little unhappy with, is the fact that the tethering seems to break down when I turn off the screen of the mobile. When it switches off by itself, the connection appears to be stable.
i have a htc ozone wm phone how did u connect to your a101
What are the pro and cons of tethering via Bluetooth? I have Wi-Fi hotspot on my phone, and it worked perfectly right away. Could the Bluetooth use less battery?
Sent from my SilverBullet "HTCDesireZ running CM7"
This thread went a bit off topic eh?
Pete, did you ever get this working? I have a A101 16GB and a Touch HD. They tethered via bluetooth off the bat for me.
Running:
A101 16GB - UrukDrod 0.7
Touch HD - EnergyRom
If you want me to post steps, let me know.
Hello.
I'm having trouble tethering an Asus Transformer (stock) to my Touch HD (also stock).
I can pair them but they don't connect.
Tried the establish data connection/turn BT on/tether suggestion but no luck.
Any suggestions?
Cheers,
E
eborremans said:
Hello.
I'm having trouble tethering an Asus Transformer (stock) to my Touch HD (also stock).
I can pair them but they don't connect.
Tried the establish data connection/turn BT on/tether suggestion but no luck.
Any suggestions?
Cheers,
E
Click to expand...
Click to collapse
No clue. Wouldn't they know more in the Asus Transformer forums?
http://forum.xda-developers.com/forumdisplay.php?f=1104
I've found several threads on the subject of Tethering a Xoom via BT and Wifi but I'm not having much luck and there's a lot of confusion about providers/Xoom versions/phones, etc. so rather than tag on to a thread I hope it's ok to start a new one.
I have the following:
Wifi Xoom (NOT the Verizon version, the one that just came out on March 27th here in the US)
HTC Hero GSM - completely unlocked (purchased in Europe). Running Android 2.1 standard update from HTC. I'm using the AT&T data plan but device is not an AT&T device at all.
I would like to see if I can Tether the Xoom to the phone and use the data connection I have on it. I understand that the Xoom's chipset doesn't allow for Ad-hoc networks. I've tried to do a Wifi Tether and although that works from my Laptop to my Phone the Xoom doesn't see the ad-hoc network. I don't believe there is any way for me to make the Wifi Tether work in Infrastructure mode so I don't think there is an option there (unless the Xoom can be modified somehow to see Ad-hoc).
So now I'm trying to use Bluetooth Tethering. I've tried both PdaNet and Wifi Tether (v2.0.7 and phone rooted via SuperOneClick). Both seem to start up fine and are running. I then pair the two devices but as many others have reported, I don't see any Tethering options on the Xoom so I'm stuck.
I've tried different orders of things... run Wifi Tether, pair, vs. pair then Wifi Tether, work with Airplane mode on vs. off, Wifi on vs. off, etc. but I never see that Tether option show up.
Anyone have this working with an HTC Hero GSM by any chance? Note that this is the Wifi-Only Xoom which seems to have different features than the Verizon 3G Xoom. Could it be that the Hero itself doesn't support this profile? Or can the Xoom be modified to force it to think the device is tetherable.
I'm not sure if rooting the Xoom would help any or maybe flashing a custom ROM like CM7 on the Hero would help any. I'd prefer not to have to do this but if someone has this working with my exact configuration I'd give it a try.
Any help would be appreciated.
From what i know, most tethering tech /apps are establishing a ad-hoc network' which the xoom isnt capable of...
I too have the Xoom wifi only version with a HTC rooted CDMA Hero.
As everyone knows now the Ad hoc will not tether with the Xoom infrastructure as of the latest.
I too get full bluetooth tethering signal from Wireless Tether, but like you the Xoom will "pair but not connect". As you, I am confused as to whether it is the Hero or the Xoom Wifi which will not connect to the bluetooth tether.
I suspect it is the Xoom Wifi, but would also like a definitive answer and better yet a viable solution.
I have no issue tethering my Xoom (Wifi model) with my Verizon Motorola Droid (1 Gen) over Bluetooth.
My Droid is full rooted with custom Gingerbread ROM (2.3.3) and Overclocked Kernel from ChevyNo1. His kernels are everything enable such as tethering and VPN. This might be the difference for some.
The one annoying thing is that everytime I enable the hotspot on my Droid, I have to go into the Xoom settings and enable tethering on the connection to my Droid. This also has to be done if either device goes not a range and brought back. I am trying to find a widget or a Tasker script to auto enable this.
Be sure to already start the wifi tether program on your phone (selecting the blutooth option on it) then bring up the blutooth settings menu on your xoom, just press and hold the little wrench you see to the right of your phone icon. it should bring up the tether option...just press that and you should see it conect via blutooth.
Just be sure to have the wifi tether app on your phone already on and set for blutooth. This works for me everytime (running the atrix) and shoujkd also work for your phone too.
Still no luck on my side with the Tethering on while I do the pairing and/or when I touch the wrench icon.
I'd like to understand more about how the Bluetooth profile is detected. Does my phone have to publish out a certain profile? Or does the Xoom have a list of device types that it knows are tetherable? I've read on another forum that it seemed like Motorola devices like the Droid worked whereas HTCs didn't seem to. I'm wondering if the Xoom detects the type of phone it's connecting to and decides whether it's tetherable or not... Anyone know? If this is the case maybe there's some file that can be tweaked on the Xoom to include additional devices or change the phone to broadcast out a different device name, etc. Maybe I should try changing my device name to 'Droid' or something.
Just guessing at this point....
I had the same issue with my droid, bluetooth tether is a pretty good alternative. I made a video of it, works with most phones with that create the Ad-Hoc. Check out video below to see the easy steps involved. Root on phone required.
Thanks for posting the video. This is exactly what I tried but does not work with my HTC Hero and my Wifi Xoom. I'm going to see if I rename my Bluetooth device name to 'Droid' to see if that makes any difference. I doubt it....
rosso said:
Thanks for posting the video. This is exactly what I tried but does not work with my HTC Hero and my Wifi Xoom. I'm going to see if I rename my Bluetooth device name to 'Droid' to see if that makes any difference. I doubt it....
Click to expand...
Click to collapse
I ran into a little bug, and it wouldn't recognize my droid. I had to unpair and turn on the bluetooth tether app. Then pair. The xoom then recognized the bluetooth tether. Hopefully this works, I apologize if it doesn't.
My wifi Xoom works perfectly paired with a CM7 Nexus One.
App: wireless tether
pd: key is the wrench
I tried renaming the bluetooth device name to 'Droid' but that didn't make a difference. I'm sure I'm following the same steps as in the video. Somehow the Xoom doesn't see the Hero as a Tetherable device...
Maybe there are some differences in Bluetooth chipsets?
Wifi tethering works with the Desire Z or the G2
I assume the network it creates is not an ad-hoc otherwise the xoom wouldn't have recognized it?
It's either not ad-hoc or you're using Bluetooth. You'd have to explicitly choose Bluetooth tethering in the Wireless Tether app so I assume you're using Wifi.
From what I understand some phones (the ones that are meant to be used as wifi hotspots) do broadcast in infrastructure mode rather than ad-hoc so I assume that's why it works for you.
Also of note is that Honeycomb only supports PAN tethering, and not DUN tethering.
Your phone also has to have "bluetooth tethering" turned on (however you do it, I don't have an android phone) so that the Xoom can discover the PAN bluetooth service.
Interesting. Something to read up more on. I'm using Wireless Tether to do the Bluetooth tethering but maybe I need something additional switched on. At least it's another direction to look at....
Seems like someone figured out how to get the Xoom to listen to Ad-hoc networks but that needs the Xoom rooted so I'll also research that. I prefer Bluetooth tethering since it uses less juice on the phone....
It does seem that "Wireless Tether" which is what I'm using on my HTC Hero, is running in PAN mode. If I look at the app's directory it has a pand executable, etc. and when I'm running the tether it is running pand in the process list.
Still, if I pair, even while it's running pand the Xoom still doesn't recognize it as tetherable. Grrr.... Wish I had another bluetooth client I could try to connect to see if it's the phone or the Xoom but I don't have anything else.
I'm wondering if it's because I have the Android 2.1 update for my Hero. Wireless Tether seems to support the 1.5 version of the Hero but doesn't mention 2.1. Maybe there is an incompatibility there...
Anyway, will continue to try to figure it out.
Rosso, your not on your own, I am still trying to figure this out on my hero running froydvillian. I have done the wifi ad hoc mod and thats working for me but BT tethering woudl be better, I will let you know If i ever find a solution.
I did see someone else loaded CM7 for the hero and then BT tether worked, but CM7 seems to have been pulled for the hero at the moment due to stability issues.
I have a droid eris (verizon's cdma hero) and I have the same exact problems but I'm on cm7and using wireless tether. I can get the to devices and connect via tethering but 5 seconds after that my phone reboots.
Just picked up a wifi-Xoom for my wife over the weekend. Tried to get it connected to my phone (HD2) as a wifi hotspot and was having problems (the ad-hoc problem). The xoom wouldn't even see the hotspot. I am running AmeriCanDroid 0413 build and it has wifi tether v. 3.0-pre11. So I switched back to winmo and still nothing, then I tried going to Darkstone SuperRam 1.5 (my fallback build). It has an older version of wifi tether, I think 2.06 or something like that and got the xoom to connect. I haven't had a lot of time to fool around with it, but it was able to get a network connection. Maybe you could try an older version of the wifi tether? I haven't experimented with the BT tethering yet. I don't want to root the xoom yet, maybe when my wife is tired of it.
/edit
Just checked the wifi-tether website and there is a new version of wifi tether and it supports softap which may help the xoom recognize the wifi hotspot.
Hi, I have just managed to get my hero bluetooth tethered to my htc hero.
The process I followed was basically what everyone has said:-
download wireless tether i am using 2.0.7
1. start bluetooth on phone and xoom (make discoverable)
2. Do not pair the devices yet
3. start up wireless tether, select bluetooth and tap to start the actual service
4. go back to bluetooth on your xoom and pair the devices
I then got an icon I had not had before and when I tapped the wrench I got the option to tether.
As for wifi tether your phone needs to put out infrastructure wifi for the xoom to see it, if its ad-hoc, you'll need to do the wifi mod so that he xoom sees adhoc
although as stated the new version of 'wifi tether' (which just seems to be the new name for the 'wireless tether' app) may fix that? but doesn't seem to support bluetooth as the 2.07 version does
1st post here, did look around to see if i could find an answer first. Has anyone utilized the TRansformer Dock (with its USB Port) to connect to a 3G or 4G network. I'm in Canada and might pick up a USB Data Stick if I know that I'd be able to use it for those times that wifi is unavailable.
I've tried with a Huawei usb stick provided by Vodafone but as expected it doesn't work.
On the other hand you can get a wifi 3G modem, so that you share the 3G connection via wifi. This works just great.
I use a wifi modem all day in the office, and use my EVO as a wifi hotspot when I am mobile. Both work great.
http://androidforums.com/evo-3d-all...t-android-tether-doesnt-work.html#post3029214
Using the above app and having root on the phone, you can wifi tether asus transformer that is not rooted. There are a few errors, but all and all it does work.
It depends on the phone's hotspot. When I first got my TF and non root, I tether to my N1 jsut fine. The TF just see my N1's hot spot as another wifi AP.
curious.. why would you want to tether your ASUS TF101?
the TF101 only has WIFI unless yuo habve the TF101G with the simcard slot.
the only time i could see you tethering your TF101 is if you had a mobile data service plan on it and you coudl share that with other devices and laptops.
if you just have the standard TF101 with wifi only and you tether it that seems like waste sharing the Wifi connection that other devices could easily just connect to anyways with out connecting through the TF101.
now since i have a samsung vibrant from Tmobile i do enable tethering on my phone and thne i connect my TF101 to my Samsung vibrant so that i can use it on the road but i jst dont see why anyone would want to enable tethering on a wifi only device.
i do notice that in wireless setup it has the option to enable hotspot but that makes no sense. why would i want to enable people to connect to my wifi only device that i am already getting wifi from somewhere else?
seems like an option that was meant to be on the TF101G but they left it enabled on the standard TF101
If I recall correctly, tethering is built in to Froyo and later as long as your carrier hasn't disabled it in their build for your phone. Or are you talking about something different?
I have a Nexus 1 also, tethering is not a problem with it because it simply acts as a regular wifi hotspot, the problem is if you have a phone that will only send out an adhoc wifi spot (like a symbian phone for example). The non-rooted transformer and other Android devices can not pick up an adhoc connection, unlike laptops and iOS devices which have no problem with them.
Add me to the don't understand list. I tether all sorts of device including unrooted transformer, iPad2, etc. to my rooted Evo.
my nexus tethers without root
This is an issue? My TF works perfectly with my Vision/DesireZ/G2 no problem.
What I'd REALLY like to see is a working USB tether. It seems dumb that I have to setup a Wifi hotspot then plug my phone into my TF in order to charge (since using the hotspot gobbles battery)
I have heard about 300 varieties at connecting my phone, (Thunderbolt)'s internet 3G/4G connection to my Acer Iconia.
I am just curious how y'all get it to work. I have tried Barnicle, [ad-hoc, not immediately supported by Honeycomb] (Works fine on my laptop [LinuxOS]
PDA net Bluetooth Dun, (Don't have the option in Honeycomb to enable bluetooth device for internet usage. (I do on my mom's Xoom))
Anyway, I am just curious how you guys are able to get this going. I have heard WiFi is faster, but Bluetooth is more energy conservative.. I'm only worried about batter on my phone, however.
I am running Honeycomb Stock+root 3.1, and CM7 on my TB
Thanks in advance for your patience. xD
CMXIV said:
I have heard about 300 varieties at connecting my phone, (Thunderbolt)'s internet 3G/4G connection to my Acer Iconia.
I am just curious how y'all get it to work. I have tried Barnicle, [ad-hoc, not immediately supported by Honeycomb] (Works fine on my laptop [LinuxOS]
PDA net Bluetooth Dun, (Don't have the option in Honeycomb to enable bluetooth device for internet usage. (I do on my mom's Xoom))
Anyway, I am just curious how you guys are able to get this going. I have heard WiFi is faster, but Bluetooth is more energy conservative.. I'm only worried about batter on my phone, however.
I am running Honeycomb Stock+root 3.1, and CM7 on my TB
Thanks in advance for your patience. xD
Click to expand...
Click to collapse
From Your phone select Settings, Wireless and Network, Tethering, Mobile AP
Turn it on and it will create an Access Point called Android AP
Connect your tablet by WiFi and you're done.