Hi there!
I tried to update firmwmare with lots of different ROM's (B135,B136,B162,B517,B522) but always getting "Update failed" at Step 2/2 - Installing.
Is this phone bricked?
I cannot access internal card.
Any ideas before i threw it away?
Update: On sdcard i am getting error in file: sd_update.log
notes: (dld_file_ptr != -1) !
dload_sd_file_data_proc-(dld_retry >= DLOAD_RETRY) failed!
Try mounting internal throught ubuntu in pink screen. Then Put b138 there, remove anything else from internal. Then remove battery from phone and put it to charger. Then start update. If it fails, start it again. After that go to recovery and do factory reset.
Sorry for my english. Im in a bit hurry.
from my Desire HD using XDA App
As long as you have a working pink screen, anything is solvable .
I do have pink screen and blue screen. I tried to mount internal with vmware ubuntu. But cannot mount it. It doesn't show up at all Don't know how to mount it.
Any ideas or help would be appreciate! Thanks guys!
update the original version you had before custom roms. update without battery. plugin power cord.
Sent from my u8800 using XDA App
Maksimitoisto said:
update the original version you had before custom roms. update without battery. plugin power cord.
Sent from my u8800 using XDA App
Click to expand...
Click to collapse
Hi!
Thanks for try helping me. But as i said earlier. I tried with all official ROM's but stuck at step 2/2. Always getting update failed.
mesnati said:
I do have pink screen and blue screen. I tried to mount internal with vmware ubuntu. But cannot mount it. It doesn't show up at all Don't know how to mount it.
Any ideas or help would be appreciate! Thanks guys!
Click to expand...
Click to collapse
In development section, blefish has tutorial to get usb in pink screen back.
Sent from my Desire HD using XDA App
mesnati said:
Hi!
Thanks for try helping me. But as i said earlier. I tried with all official ROM's but stuck at step 2/2. Always getting update failed.
Click to expand...
Click to collapse
Also tried without battery. It is the only way to update. With battery cannot go further from "step 1/2 Unpacking"
julle131 said:
Try mounting internal throught ubuntu in pink screen. Then Put b138 there, remove anything else from internal. Then remove battery from phone and put it to charger. Then start update. If it fails, start it again. After that go to recovery and do factory reset.
Sorry for my english. Im in a bit hurry.
from my Desire HD using XDA App
Click to expand...
Click to collapse
How to find device to mount? dmesg show me nothing.
Any help would be helpful
[email protected]:/home/xxx# lsusb
Bus 002 Device 002: ID 12d1:1035 Huawei Technologies Co., Ltd.
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
I can see device with "lsusb" but cannot mount it
Anyone?
julle131 said:
In development section, blefish has tutorial to get usb in pink screen back.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Thanks julle!
But seems to me that you don't understand the problem.
Here are the steps from blefish:
1 Download update-B518-bootloader.zip from MediaFire.
2 Save it to the root of your SD Card.
3 Start the phone in recovery mode (recommended recovery is 5.5.0.4)
4 Select "install zip from sdcard"
5 Select "chooze zip from sdcard"
6 Select the zip you downloaded before.
7 Select yes.
I am already STUCKED in step 3. Because i do not get to RECOVERY MODE!!!
I am having only PINK screen (VOL +, VOL -, power button) and BLUE screen (VOL +, power button). That's it!
And CANNOT access to internal card on Windows neither on Linux Ubuntu.
Guess Huawei officials has USB drivers to access internal card on Windows or Linux but they don't share them with us
I have android_winusb.inf driver but cannot install it and recognize device in pink or blue screen mode
mesnati said:
I am already STUCKED in step 3. Because i do not get to RECOVERY MODE!!!
I am having only PINK screen (VOL +, VOL -, power button) and BLUE screen (VOL +, power button). That's it!
And CANNOT access to internal card on Windows neither on Linux Ubuntu.
Click to expand...
Click to collapse
I got the blue screen when I accidently forgot to put boot.img back in its place on the image partition.
My hypothesis is, based on that, the first UPDATE.APP (the smaller one) changes the partition layout (which would delete all the files), while the larger UPDATE_G.APP starts installing all the files: /system but - more importantly - the image partition where boot.img, AMSS.mbn and recovery.img are stored. If the update did not take, then they won't be there and the bootloader can't start them up. In my case, I was able to mount the image partition in Linux and put the boot.img back. Hopefully I'm talking out of my ass. :\
Ah! I was able to mount the partition in Linux because I'm using the B512 bootloader; you must have the B540 bootloader (or whatever is its equivalent for the U8800). I guess Huawei's laissez faire attitude towards rooting (you could browse / from the computer!) is going away now that they're moving into the big time (deals with AT&T, the Honor etc.). I don't know how you can downgrade if you can't boot to something like recovery.
mesnati said:
Guess Huawei officials has USB drivers to access internal card on Windows or Linux but they don't share them with us
I have android_winusb.inf driver but cannot install it and recognize device in pink or blue screen mode
Click to expand...
Click to collapse
Actually, these work: http://www.mediafire.com/?j33yo9wy9bspm86
But you can't ADB from the bootloader (or use them to mount a partition); it's for running Qualcomm QPST (though I couldn't figure out how to get it working).
Sorry, but im running out of ideas. It seems you have bootloader locked, and without recovery we cant unlock it... what happens if you install official 2.2 and after error try to install it again? We must get the bootloader unlocked.
Sent from my Desire HD using XDA App
julle131 said:
Sorry, but im running out of ideas. It seems you have bootloader locked, and without recovery we cant unlock it... what happens if you install official 2.2 and after error try to install it again? We must get the bootloader unlocked.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
You are making me laugh )
I cannot install NOTHING!!! That's the main problem
qwerty12 said:
I got the blue screen when I accidently forgot to put boot.img back in its place on the image partition.
My hypothesis is, based on that, the first UPDATE.APP (the smaller one) changes the partition layout (which would delete all the files), while the larger UPDATE_G.APP starts installing all the files: /system but - more importantly - the image partition where boot.img, AMSS.mbn and recovery.img are stored. If the update did not take, then they won't be there and the bootloader can't start them up. In my case, I was able to mount the image partition in Linux and put the boot.img back. Hopefully I'm talking out of my ass. :\
Ah! I was able to mount the partition in Linux because I'm using the B512 bootloader; you must have the B540 bootloader (or whatever is its equivalent for the U8800). I guess Huawei's laissez faire attitude towards rooting (you could browse / from the computer!) is going away now that they're moving into the big time (deals with AT&T, the Honor etc.). I don't know how you can downgrade if you can't boot to something like recovery.
Actually, these work: http://www.mediafire.com/?j33yo9wy9bspm86
But you can't ADB from the bootloader (or use them to mount a partition); it's for running Qualcomm QPST (though I couldn't figure out how to get it working).
Click to expand...
Click to collapse
You are right!
So the device should be bricked now? I cannot give back to warranty 'cause i already did it once If i send also this one they will laugh at me and of course they will not give me another phone
But after i installed those drivers you've attached i am getting no more exclamation mark in Device manager. hmmm. Please look at attached pic. What now?
Is there a chance to getting to device through hyperterm or something?
mesnati said:
But after i installed those drivers you've attached i am getting no more exclamation mark in Device manager. hmmm. Please look at attached pic. What now?
Is there a chance to getting to device through hyperterm or something?
Click to expand...
Click to collapse
qwerty12 said:
But you can't ADB from the bootloader (or use them to mount a partition); it's for running Qualcomm QPST (though I couldn't figure out how to get it working).
Click to expand...
Click to collapse
Actually, I haven't tried HyperTerminal on the COM ports/modem - maybe it could, somehow, let you do something? Changing the USB mode would be great...
If you do figure out QPST, you'll need the firmware in a form it can understand - maybe you'd have to get another device to dump its firmware...
Regarding warranty: Couldn't you make the case that it was an official firmware update that caused your phone to brick?
mesnati said:
You are making me laugh )
I cannot install NOTHING!!! That's the main problem
Click to expand...
Click to collapse
I am bad in english, so it might be the problem cant express my self right. I know it fails, but run it again after the fail. I am hoping it unlocks bootloader. Then you can access the phones whole memory from ubuntu.
Someone, if you understand this sh*t im writing, please translate it to real english
Sent from my Desire HD using XDA App
julle131 said:
I am bad in english, so it might be the problem cant express my self right. I know it fails, but run it again after the fail. I am hoping it unlocks bootloader. Then you can access the phones whole memory from ubuntu.
Someone, if you understand this sh*t im writing, please translate it to real english
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Your english is ok I tried 100 times after it fails and every time same error appears "Update failed"
Related
Hi, I think this is my first post here. Anyway, here the question:
I have an Ideos X5 (not pro), it is bricked. So far, I have followed instruction for recoveries from several threads, but none of them worked because in my phone:
there is no boot screen
there is no pink screen
there is no logo
there are no images of any kind (screen wont even turn on)
it only vibrates when I plug it into my computer
Also *sometimes* the buttons light up and when this happens windows detect a new USB device, but after I while it dissapears again. Also, this happens only with the battery on.
The phone became bricked after I followed instructions to revert back to froyo from gingerbread (wifi wasn't working). All roms were originals from Huawei.
So, any suggestions??
Thanks in advanced.
I had a problem like you.I have deleted amss.mbn file because Huawei locked pink screen, it was bricked But i wasn't so patience enough, i sent my phone to technical care.But here are the answers, try it with caution:
shuiyunxingzuo said:
Hi
Space is not enough to flash any ROMs;
Bootloader is locked,you could not edit that sector.
So is there a special ROM that is very small and allows to edit the bootloader?
Here is the MINI ROM:
http://www.mediafire.com/?7c33h84a974va28
Flash it than edit the bootloader~
NOTICE: I format the whole sector ,and the file including IMEI was missing
'Cause I don't know how to edit recovery or other system files like .mbn,
so just delete the abnormal big file and you would be able to flash any ROM s
Click to expand...
Click to collapse
xmsnx said:
Yes!!!! My phone works"!!!!!!!
Ok here's what I did
Download mediafire.com/?1hbk6n46hgamyt6
Unzip it, and find UPDATE.APP
Put UPDATE.APP in a dload folder and upload to empty sdcard.
Put sdcard in phone, and hold vol+/- and power and flash it.
After phone has restarted pull battery.
Download http://www.mediafire.com/?6hrfz36b8e2vw87
Unzip and copy the dload folder to empty sdcard.
Hold vol+/- and power and flash it.
After it fails near the end or if it restarts then pull battery.
Download a rooted boot.img and a clockworkmod recovery.img (got both mine from links at modaco)
Attach phone to PC in pink screen mode and delete the boot.img and recover.img files.
Upload the downloaded root.img and recovery.img to image folder in phone.
Download any custom rom from XDA, I used http://forum.xda-developers.com/showthread.php?t=1475687 and upload it to sdcard
Pull battery.
Hold vol+ and power and go into clockworkmod, wipe everything and flash the custom rom!!
Good luck!
Click to expand...
Click to collapse
Tried taking off the battery for 10 seconds and after that inserted USB into computer (without battery)? Also try to take off battery and insert USB to wall-charger.
The buttons lighting up could be our way out, but if it only stays there for a couple of seconds it doesn't help. Can you see what Windows detects?
Hi again,
thanks for answering.
None of your suggestions worked anyway, because it won't even load anything from the sdcard, it just makes a short vibration and nothing more.
I managed to get the lights on again, but windows didn't show what kind of device it was, maybe because it's already installed but I'm not sure which usb device is it (windows did make a sound though, like "device is connected" sound). Also I noticed there's a red led blinking near the speaker, does that mean anything?
Anyway, tried to flash while the lights were up but it did nothing, and after two minutes the went off again.
Thanks again for your suggestions.
I connected the phone to my laptop with ubuntu, and despite I cannot do anything with the phone, there are two devices created in /dev: hiddev0 and hidraw0. Is there a way to flash the device using any of those files?
thanks again.
Worth a try on this post : Here
It is fried then
Try mounting those two devices, is there any file system recognized? It might not be bricked, but this is an issue probably nobody has had yet. Send it in for repair if it is still within warranty.
Important question: How did this even happen?
XphX
XphX said:
Important question: How did this even happen?
Click to expand...
Click to collapse
auxorro said:
The phone became bricked after I followed instructions to revert back to froyo from gingerbread (wifi wasn't working). All roms were originals from Huawei.
Click to expand...
Click to collapse
Sent from my U8800 using Tapatalk 2
Hi,
thanks for all the help.
Sadly nothing works with this phone, I tried mounting and dd from the devices but nothing happens.
I guess I'll send it for repair (hope it's still within warranty)
Anyway, thanks again for all the suggestions.
Bye!!
auxorro said:
Hi,
thanks for all the help.
Sadly nothing works with this phone, I tried mounting and dd from the devices but nothing happens.
I guess I'll send it for repair (hope it's still within warranty)
Anyway, thanks again for all the suggestions.
Bye!!
Click to expand...
Click to collapse
If the phone wasn't rooted, then it is still within warranty
**NEW GET THE TWO ICS ROMS http://forum.xda-developers.com/showthread.php?t=1633907**NEW
first download all three of the files
open the acer decrypter and run it
now where select the input file, should be in downloads folder(leave the output folder
remove the sd card from your acer a500 and put it into some kind of device that can hold an sd card and plug it in
select usb mass storage device or disk drive on your device
go into your download and open the DECRYPTED rom
Extract the whole folder to desktop
now copy all of that to the sd card through your phone/device
shut off iconia tab
hold power button and VOL- until it says entering recovery mode
now you should see a green android guy with gears in him
DO NOT TOUCH ANYTHING
hope this worked, it worked for me!!!!!!!!
*************if the first rom doesnt work do the same steps for the second one, be sure to delete the first one off your sd card*********
any input from other users,... success?.....failure?.
just think this is good info..."if correct" i wouldn't mind having this knowledge if it works
Yes, it works. I did it a few times to unbrick my A501 this week.
I had broken my recovery also, so the EUU version helped in that case, but at least I got a clean start to go to another ROM.
hope this has worked if it has please hit the thanks button
When you say SD Card, do you mean the external SD card, or the onboard card? I need to do this, but my tablet isn't recognizing my external SD card. Is there another place for me to put the files, where the tablet will access them?
You need to us ethe external one, in cwm mount SD card
lol im such a dope ive actually used the EEU rom to ix the verified boot failed error when i first loaded flexreaper.....lol mind becoming more cluttered then my pc.
For a cluttered PC I would recommend advanced system care hahahahhahahahha and for your head a good run or bike ride or even a nap
jnktechstuff said:
For a cluttered PC I would recommend advanced system care hahahahhahahahha and for your head a good run or bike ride or even a nap
Click to expand...
Click to collapse
lol tried all of the above no help
Hi,
just a question, why download the 2 ICS ?
one of the 2 is enough ? Which one to choose ? What is the difference ?
Thanks
Only boots to recovery
So i have been using the flexreaper rom and i tried installing the newest revision and when it all finished (i took all the proper wipe steps before installing) and now my tablet only goes to the acer screen... I have tried other roms, but no dice. I am going to see if this works.
Great Job!
You did a great job with this post, It works flawlessly
Thanks!
My Iconia does not even boot, all I have is a black screen with the power light on. Will this method work for me?
Try pressing the power button and volume up at the same time and if you see the green android with gears, you are good to go.
DROID RAZR MAXX /DROID BIONIC
Help
jnktechstuff said:
[*]first download all three of the files
Click to expand...
Click to collapse
Acer decrypter is one of the files, but what are the other two? How are you supposed to know which two to download? I'm bricked and can't check in Settings > about like the thread says...
there is the decrypter and the two ics roms,put both on your sd card just in case the other one doesnt work
JM1084 said:
My Iconia does not even boot, all I have is a black screen with the power light on. Will this method work for me?
Click to expand...
Click to collapse
you are stuck in a apx mode it is solved by getting this its called afterota:
https://hotfile.com/dl/160313682/62f94d6/Afterota_v1_09.zip.html
there is a section that says get out of apx mode
MAKE SURE YOUR ACER DRIVERS ARE INSTALLED!!!!!!!!!!!!
jnktechstuff said:
you are stuck in a apx mode it is solved by getting this its called afterota:
there is a section that says get out of apx mode
MAKE SURE YOUR ACER DRIVERS ARE INSTALLED!!!!!!!!!!!!
Click to expand...
Click to collapse
I have managed to get it out of APX mode and flashed Lightspeed V8 ICS bootloader and recovery. Have tried to flash multiple ICS roms but it hangs at "Booting primary kernel image" with every one. Any possible ideas?
Sent from my ADR6400L using Tapatalk 2
you need to re-install your bootloader, all the roms now require the ics bootloader
multor said:
Hi,
just a question, why download the 2 ICS ?
one of the 2 is enough ? Which one to choose ? What is the difference ?
Thanks
Click to expand...
Click to collapse
you need both just in case one of them doesn't work, it saves you time!!
Hi all,
I have a bit of a problem.
I had an old Oxygen (?) 2.3.? but wish to upgrade to ICS so after installing the 'official' 2.3.5 was following steps in http://forum.xda-developers.com/showthread.php?t=1420728.
I got up to the bit about installing Clockworkmod. When I tried to go into recovery mode for some reason (I must have screwed something up) it went back into the Firmware update (presumably because I still had the sd card with the 2.3.5 updated on it). It gets through the first step of the update but when it goes to start step 2 it comes up with 'Update failed'.
If I remove the sd card and try to start up normally I get the blue screen.
I can get to the pink screen but I'm not sure what to do from there.
Thanks for any help.
Cheers,
H.
horrendo said:
Hi all,
I have a bit of a problem.
I had an old Oxygen (?) 2.3.? but wish to upgrade to ICS so after installing the 'official' 2.3.5 was following steps in http://forum.xda-developers.com/showthread.php?t=1420728.
I got up to the bit about installing Clockworkmod. When I tried to go into recovery mode for some reason (I must have screwed something up) it went back into the Firmware update (presumably because I still had the sd card with the 2.3.5 updated on it). It gets through the first step of the update but when it goes to start step 2 it comes up with 'Update failed'.
If I remove the sd card and try to start up normally I get the blue screen.
I can get to the pink screen but I'm not sure what to do from there.
Thanks for any help.
Cheers,
H.
Click to expand...
Click to collapse
IS it the pro or regular?
conect to computer in blue screen mode and watch what is missing.
Sent from not my ragelis
bronxitas said:
conect to computer in blue screen mode and watch what is missing.
Click to expand...
Click to collapse
Thanks for the suggestion. How do I see what is missing? I have tried various USB drivers but so far haven't found one that will mount the device. Do I need to use logcat with adb?
Any idea why it will no longer allow me to simply reflash the stock rom?
By the way, the device is the standard u8800 - not the -pro.
Cheers,
H.
Not in blue screen, you must go to pink screen mode(by pressing vol+/- end power when the device is turned off). There you'll be able to see the folder with the system files on pc.
dancer_69 said:
Not in blue screen, you must go to pink screen mode
Click to expand...
Click to collapse
bronxitas said:
conect to computer in blue screen mode and watch what is missing.
Click to expand...
Click to collapse
Now I'm confused.
When I connect the phone to my Windows computer (tried XP and 7 in both pink and blue modes), the device does not register. Windows detects the new device and asks for drivers. I have tried different ones but none that I've tried so far will see the device. If someone could give me a link to drivers that definitely work I would be most grateful.
Like I said in my original post, if I leave the SD card in it tries to do the firmware upgrade but fails. Is there no way to 'reset' the phone somehow so that the firmware upgrade will go through? Perhaps downgrade to an older version first??
Thanks,
H.
There is not blue screen mode. Blue screen just shows that the system files don't exist. If recovery image doesn't exist you get a blue screen when you try to reboot to recovery mode. If you cannot boot normally, probably boot.img is erased(or maybe all system files which are on Image folder are erased).
Also if you had flashe an official rom version higher of B518, you probably have a locked pink screen, so it doesn' t matter if you have or not drivers because you cannot access the special partition which has the Image folder with all system files anyway.
Now, if the update proccess of official rom stops or second step(after unpacking proccess), probably a partition on the device is corrupted and the update cannot write to it. There is a special update, which you can flash with the same way as the official rom(put it on dload folder), and maybe can solve the problem. I' ve posted it on another thread here before some time. The filename is: update-160up
try to search the forum and hopefully you will find the thread(which has some isntructions and comments also).
You can try to flash a 2.2 official rom also. Maybe the update will succeed then.
horrendo said:
Hi all,
I have a bit of a problem.
I had an old Oxygen (?) 2.3.? but wish to upgrade to ICS so after installing the 'official' 2.3.5 was following steps in http://forum.xda-developers.com/showthread.php?t=1420728.
I got up to the bit about installing Clockworkmod. When I tried to go into recovery mode for some reason (I must have screwed something up) it went back into the Firmware update (presumably because I still had the sd card with the 2.3.5 updated on it). It gets through the first step of the update but when it goes to start step 2 it comes up with 'Update failed'.
If I remove the sd card and try to start up normally I get the blue screen.
I can get to the pink screen but I'm not sure what to do from there.
Thanks for any help.
Cheers,
H.
Click to expand...
Click to collapse
Depending on your model you need to restore its pinkscreen stock files. The boot.img will fix the bluescreen. Heres oxygen's boot.img. Mount via usb to computer*
Somcom3X said:
Depending on your model you need to restore its pinkscreen stock files. The boot.img will fix the bluescreen. Heres oxygen's boot.img. Mount via usb to computer*
Click to expand...
Click to collapse
I have same problem and can not mount phone via computer seems the only way is via external sd card. will the phone boot off the sd card if the above boot.img is loaded on to it and where would i put this file. and should i take the 2.3 gingerbread update (dload/update.app)off the sd card and just have the boot.img file?
fookedit said:
I have same problem and can not mount phone via computer seems the only way is via external sd card. will the phone boot off the sd card if the above boot.img is loaded on to it and where would i put this file. and should i take the 2.3 gingerbread update (dload/update.app)off the sd card and just have the boot.img file?
Click to expand...
Click to collapse
you should flash the update again maybe?
Sent from my u8800-51 running popura ICS.
is it game over?
Somcom3X said:
you should flash the update again maybe?
Sent from my u8800-51 running popura ICS.
Click to expand...
Click to collapse
flashed normal gingerbread with update.app and update_custom.app in the dload folder. no luck, update failed. the phone does go into boot loop with huawei logo when power vol+- and plugged into external power. Help! I should say that i have recently upgraded it to official 2.3.5 firmware from 2.2 using and wanted to install dzo's aurora so i like others
"2. rooted with superoneclick
3. replaced .cust_backup/image/recovery.img with recovery.img (cwm5.0.2.7), by remount and es file explorer'
restarted, bang! blue screen restarted again with power vol-+ got pink screen but computer wont detect any storage on phone so i cant access the phone with the computer only via external sd card and the updates dont seem to work, i would like to try booting with froyo but cant find it anywhere....
so yeah, help, seems like game over to me!
Hello to all! :good:
It is the following: I have a Ideos X5 (not-pro) from a friend who tried to install a rom that is not made for this phone.
When trying to flash the rom (which was made for another phone), it stuck at boot (Huawei's logo).
Whenever you connect your phone gets stuck in the symbol of Huawei.
:crying:
On the mobile phone:
Is routed;
Do not have custom partition;
Can only access the pinkscreen;
Can't access the recovery;
I wonder if there is any way to fix it and if so what ...
I've seen the tutorial Blefish (here) and was wondering if I can use ...
miguel510 said:
hello to all! :good:
It is the following: I have a ideos x5 (not-pro) from a friend who tried to install a rom that is not made for this phone.
When trying to flash the rom (which was made for another phone), it stuck at boot (huawei's logo).
Whenever you connect your phone gets stuck in the symbol of huawei.
:crying:
On the mobile phone:
is routed;
do not have custom partition;
can only access the pinkscreen;
can't access the recovery;
i wonder if there is any way to fix it and if so what ...
I've seen the tutorial blefish (here) and was wondering if i can use ...
Click to expand...
Click to collapse
please someone to help me?!
If your friend installed a rom not meant for this phone, it might happen the /system or /boot images were installed to wrong place, messing up the phone. It would be a great help if you would link the rom your friend tried to install so I could see what is messed up.
If you can access pink screen, do you have the image/ folder with the boot.img and recovery.img?
By the way, if it is stuck on boot image, does it say anything in the PC? Like a device connected?
Blefish said:
If your friend installed a rom not meant for this phone, it might happen the /system or /boot images were installed to wrong place, messing up the phone. It would be a great help if you would link the rom your friend tried to install so I could see what is messed up.
If you can access pink screen, do you have the image/ folder with the boot.img and recovery.img?
By the way, if it is stuck on boot image, does it say anything in the PC? Like a device connected?
Click to expand...
Click to collapse
I think he tried to port a rom from Galay Ace and failed...
When i plug the phone in the PC (win7 - ultimate - 32bits) he try to install the drivers and fail...
The ADB drivers can't be installed...
But when he was intalling the recovery.img he did it with one file explorer, not plugin in the phone to the computer...
answer be patient
1st of all download b516 orginal rom and try to flash it when u do that all should be fine with recovery +/- and power then connect to pc replace recovery
Wicio0 said:
1st of all download b516 orginal rom and try to flash it when u do that all should be fine with recovery +/- and power then connect to pc replace recovery
Click to expand...
Click to collapse
But that's the problem!
When i go to pink screen to start the update he doesn't do anything...
And i can't go to recovery...
u need put dload on internal storage that 2gigs one.. and then just turn on phone to update itself.. u can try download ubuntu burn it on cd/dvd then u dont need to install it just open from cd then connect your device in pink mode mby ill see it
Wicio0 said:
u need put dload on internal storage that 2gigs one.. and then just turn on phone to update itself.. u can try download ubuntu burn it on cd/dvd then u dont need to install it just open from cd then connect your device in pink mode mby ill see it
Click to expand...
Click to collapse
How?
Can u be more specific?
Sure, what I mean is that ... linux is more like android than windows for example in much cases u dont need drivers to your device also file system is alike ex4 or other not ntfs ;P ,,, its worth tryin conecting it to Linux .... all u need is be patient and dont make stupid moves like throwin phone on wall (that not helps "tested on SE P1i")
Wicio0 said:
Sure, what I mean is that ... linux is more like android than windows for example in much cases u dont need drivers to your device also file system is alike ex4 or other not ntfs ;P ,,, its worth tryin conecting it to Linux .... all u need is be patient and dont make stupid moves like throwin phone on wall (that not helps "tested on SE P1i")
Click to expand...
Click to collapse
Not even with linux...
Yet another Newb
I have googled / search / read many posts & threads over the past days & weeks.
I had a Acer Iconia A500 freeze @ the Acer logo screen like so many other have had, BUT I managed to fix it last time.
My mate has an Acer Iconia A501 ( so its got a sim card as well ) & its done the same thing.
I have tried the same process as the last 1, but to no avail as yet.
I'm needing some help please guys as I bet its something really simple , but I cant see why its not working for me.
OK AFAIK its all been stock Acer roms & OTA updates.
Processes so far..
Power on & hold down volume + & slide screen lock get this & then reboots
erasing user data .. erasing cache...
Power on & hold down volume - & slide screen lock get this
Bootloader v0.03.12-ICS: starting fastboot USB download protocol
Power on & hold Volume - release power button when it vibrates / starts to boot , still hold down vol button
I have tried the same update.zip file as my last A500 experience , but it got me to the android icon with the spinning globe for hours, left from any where from 40 mins to over night & same basically a lockup. then tried again & somehow got it to almost 90 ish % & stayed like that for ages.
Now I can only get it to see the green android guy for 10-12 seconds before he falls over & dies with the red triangle & black exclamation mark inside it.
I'm not fussed on what rom etc or even stock acer again as I can OTA it back up to last again.
I would just like it to work again & see where I am going wrong...
Anyone able to assist in my error please.
OH micro SD card is formatted to Fat under Win7,
OR should it be Fat32 ?? ( I am going to format with another A500 Tablet & hope it works better )
Also when I go to start it
Power on & hold Volume -, release power button when it vibrates / starts to boot , still hold down vol button
it shows on screen that its erasing data before booting & seeking the update.zip file from sd card etc..
SO it looks like its all doing what it should be , but then doesn't.
Still looking for the reason why this flash recovery wont work.
Using various versions & ensuring all are renamed to update (update.zip file) & messages on booting are the same.
looking for / accessing update.zip file etc etc
Android guy sits there & now I cant even get the status bar below him , its just the guy 10 seconds & dead with his guts hanging out
Any thoughts or a correct file to go with the bootloader appreciated.
Am I doing something wrong OR is it that corrupt its stuffed ???
Thanks to you guru's for assistance
Next instalment
My next instalment on the "unhappy" A501
I have moved my trying to an XP Pro SP3 machine.
I have installed the USB driver package & also the Windows update for the MTP.
I plug in & turn on , windows detects the Acer Iconia A500 & loads into Dev Manager as Acer MTP
It doesn't load enough to appear as a separate drive in the "My Computer" though.
I spose its a small step , but still getting no where.
Please Help :crying:
as I would like to hand this back as I need to move house & it will take some time for me to get setup again to be able to look at fixing it.
Ask for more info & I will reply ASAP
Uninstalled the MTP update , same for the USB driver package & rebooted.
made sure the Acer dir had gone as well.
Installed USB driver pack again & looked at that it contains.. MTP folder & drivers are in there already ..
Still shows up as Acer MTP & nothing in My Computer.
I did see that it shows up with the yellow exclamation mark after a while & then re connects again. ??
IF I start Blackthunders A500 Filemanager using the power button / vol + & flicking the screen lock on/off, I start with Bootloader ver & "starting fastboot USB download protocol.
IS this any help to fix the tablet ??
edit : How do I confirm it has USB Debugging turned on IF I cant turn it on ???
Hi Noel, sorry you got troubs
Your ext sd card should really be formatted via android, although there is a tool for windows you can use called sd_formatter, HP also have a formatting tool, google either one - I have previously posted the sd_format tool "here somewhere" will provide the link if I can track it down.
The drivers are the most important part of getting your tab up and running again.
If you have the Acer ones and the USB ones installed correctly, you should be good to go. In saying that, it can be a real biarch when you're in the position you're in.
Uninstall the acer drivers, reboot. Do not have your tab connected, wait for windows to fully start and its done updating itself or woteva it needs to do lol.
Run the driver exe. If your tab is not booting its hard to tell if usb debug is enabled or not. ANd windows will have trouble detecting it....sooooo......
Go to the root guide in my sig, post #2 download the "babsector file". You will also need to download an ics or jb rom, there is a stock rooted ics or you can use one of 'civato's' Flex roms - I'm still running one of his old ICS ones and it does me fine, I've not kept up with the latest roms, so I cannot help you much with that sorry!
Download your rom and put it on your sd card (if theres a formatting issue we will find out very soon!!!)
Babsector is run via your PC, now, win7 32bit systems work best for this, so if you aint got one, find a mate thats got one! You will save yourself alot of grief by not using win8. Even XP or vista will work!!
You'll need to enter your cpuid so keep that at the ready.
Babsector will flash cwm recovery and install the unlocked bootloader for you.
After running the first bat file, enter recovery and do a complete wipe, (enable data/media option) It has to be a FULL wipe theres no getting around it. And yes, do the wipe procedure at least TWICE!!!!
Once the wipes are done, flash the rom and then run the b.bat file for good measure. As long as you see the big white "PASS" after running each bat file, you're good to go.
IF there is a problem, babsector will output an error....post that and we'll go from there!
Good Luck
dibb
dibb_nz said:
Hi Noel, sorry you got troubs
Your ext sd card should really be formatted via android, although there is a tool for windows you can use called sd_formatter, HP also have a formatting tool, google either one - I have previously posted the sd_format tool "here somewhere" will provide the link if I can track it down.
The drivers are the most important part of getting your tab up and running again.
If you have the Acer ones and the USB ones installed correctly, you should be good to go. In saying that, it can be a real biarch when you're in the position you're in.
Uninstall the acer drivers, reboot. Do not have your tab connected, wait for windows to fully start and its done updating itself or woteva it needs to do lol.
Run the driver exe. If your tab is not booting its hard to tell if usb debug is enabled or not. ANd windows will have trouble detecting it....sooooo......
Go to the root guide in my sig, post #2 download the "babsector file". You will also need to download an ics or jb rom, there is a stock rooted ics or you can use one of 'civato's' Flex roms - I'm still running one of his old ICS ones and it does me fine, I've not kept up with the latest roms, so I cannot help you much with that sorry!
Download your rom and put it on your sd card (if theres a formatting issue we will find out very soon!!!)
Babsector is run via your PC, now, win7 32bit systems work best for this, so if you aint got one, find a mate thats got one! You will save yourself alot of grief by not using win8. Even XP or vista will work!!
You'll need to enter your cpuid so keep that at the ready.
Babsector will flash cwm recovery and install the unlocked bootloader for you.
After running the first bat file, enter recovery and do a complete wipe, (enable data/media option) It has to be a FULL wipe theres no getting around it. And yes, do the wipe procedure at least TWICE!!!!
Once the wipes are done, flash the rom and then run the b.bat file for good measure. As long as you see the big white "PASS" after running each bat file, you're good to go.
IF there is a problem, babsector will output an error....post that and we'll go from there!
Good Luck
dibb
Click to expand...
Click to collapse
Morning dibb
I have the Acer USB driver pack that has MTP files as well, is this all I need or maybe that's the start of my problems ??
( Acer ones and the USB ones installed correctly ?? )
1 of my many issues is that as its not my tablet , I don't have the cupid at all.
It wont start so I cant get it that way , & tried to connect with blackthunders A500 file manager as well but doesn't output any data that I can see / find.
Im thinking I have to flash with an unlocked bootloader before I can do anything - Yeah ??
I am quite happy to eventually go back to stock ICS @ the ends so anything is good.
R u familiar with Linux at all, its the only way of retrieving yr cpuid.
If not, it will be a matter of finding an update.zip that will work 4 u. There is one in the root guide u can try?
Sent from my HTC_PN071 using Tapatalk
dibb_nz said:
R u familiar with Linux at all, its the only way of retrieving yr cpuid.
If not, it will be a matter of finding an update.zip that will work 4 u. There is one in the root guide u can try?
Sent from my HTC_PN071 using Tapatalk
Click to expand...
Click to collapse
Hi
Not played with any Linux before so this might be funny at best to say the least.
the update.zip you suggest , is that the HC 3.1 full ??? (then rename to update.zip) on sd card & try ??
Yep, there's a guide stickied in general for using Linux to get it.
And yep the hc 3.1 FULL. If u get it booting you can OTA all the way to ics, but that's quite time consuming. So root it and install cwm, that will get u yr cpuid. After that unlock the boot loader!!!
I see there's a kit Kat Omnirom, based on civatos flex Rom, gonna give it a spin myself
Sent from my HTC_PN071 using Tapatalk
dibb_nz said:
Yep, there's a guide stickied in general for using Linux to get it.
And yep the hc 3.1 FULL. If u get it booting you can OTA all the way to ics, but that's quite time consuming. So root it and install cwm, that will get u yr cpuid. After that unlock the boot loader!!!
I see there's a kit Kat Omnirom, based on civatos flex Rom, gonna give it a spin myself
Sent from my HTC_PN071 using Tapatalk
Click to expand...
Click to collapse
Tried using USBdeview to get the cupid, found a sting with 15 character's so tried that with a "0" at the start.
used the SB calculator & then blackthunders APX flasher , but it didn't work.
got all the way through with out any issues , but didn't actually flash it
Had assistance from JdgM3NT4L but still trying
the issue is the CPUID though to ensure I have it
more help the better
.
*fergs* said:
Tried using USBdeview to get the cupid, found a sting with 15 character's so tried that with a "0" at the start.
used the SB calculator & then blackthunders APX flasher , but it didn't work.
got all the way through with out any issues , but didn't actually flash it
Had assistance from JdgM3NT4L but still trying
the issue is the CPUID though to ensure I have it
more help the better
.
Click to expand...
Click to collapse
Hi dibb_nz
with lots of help from JdgM3NT4L I now have the cupid & can get through all of Blackthumders apx flasher up to the 2nd stage of the flashing where its uploading the image file.
it goes into this about 50 % then just hangs...
How long should it normally run for the flashing ??
.
Oh dear, this is not an error u want to see...Would explain the freezing issues. I've never seen a suuccesful solution for the ebt error. Just keep trying sooner or later it will flash....also the tdv4 file has been known to work , you'll be back on hc 3.2 with that but you'll have root and cwm if that's any consolation, lol...
The manual nvflash methods work best babsector or civs nvflash. If it is a faulty chip then even if u do get it booting it won't be a permanent fix.....
See how u go with the other methods k?
Sent from my HTC_PN071 using Tapatalk
dibb_nz said:
Oh dear, this is not an error u want to see...Would explain the freezing issues. I've never seen a suuccesful solution for the ebt error. Just keep trying sooner or later it will flash....also the tdv4 file has been known to work , you'll be back on hc 3.2 with that but you'll have root and cwm if that's any consolation, lol...
The manual nvflash methods work best babsector or civs nvflash. If it is a faulty chip then even if u do get it booting it won't be a permanent fix.....
See how u go with the other methods k?
Sent from my HTC_PN071 using Tapatalk
Click to expand...
Click to collapse
Looking for a link to civs nvflash...
is that on your pages as well , I haven't seen it as yet
.
Yep it is, it's on the unlocked bootloader post as well
Sent from my HTC_PN071 using Tapatalk
dibb_nz said:
Yep it is, it's on the unlocked bootloader post as well
Sent from my HTC_PN071 using Tapatalk
Click to expand...
Click to collapse
Thanks
Is there any advantage to using XP rather than win7 ??
.
Not thats ever been report ed, but hey, woteva works
Sent from my HTC_PN071 using Tapatalk
*fergs* said:
Thanks
Is there any advantage to using XP rather than win7 ??
.
Click to expand...
Click to collapse
Ok
looks like its almost a lost cause..
using civs flasher in APX mode under win7
gets through the start of the flashing to failed executing command 25 NvError 0x120002
command failure: sync failed <bad data>
bootloader staus : Bct Write Failed <code22> message : nverror:0x42008 <0x6042008> flags :0
then it has *press anykey when your A500/501 is in botloader mode
press any key to continue .. so I did anyway
flashing bootloader : bootloader_v8.bin
nvflash started
[resume mode]
formatting partition 4 please wait.. command execution failed cmd 13, error0x120002
failed!
command failure: format partition failed <bad command>
bootloader status: unknown operation <code: 1> message: flags:0
.
When u tried the apxflash tool earlier, there's an option to "dump" yr bct - If u didn't do that try dumping it, and then choose " use saved bct' , sorry dude its been a loooong time since I've had to do it so I may not have the wording exactly right
Sent from my HTC_PN071 using Tapatalk
dibb_nz said:
When u tried the apxflash tool earlier, there's an option to "dump" yr bct - If u didn't do that try dumping it, and then choose " use saved bct' , sorry dude its been a loooong time since I've had to do it so I may not have the wording exactly right
Sent from my HTC_PN071 using Tapatalk
Click to expand...
Click to collapse
Ok thanks.
Will try that as well when I try #17 again shortly.
will make sure tablet is connected in APX before I click "dump"
I assume because I get all this way with multiple programs , the CPUID & SBK have to be correct ??
.