Related
--
thats how mine is but in the bottom. not a big deal but i did feel it
several people reported the same thing before. screen not flush all the way around. there's no adhesive, the screen slides out of the outer sleeve if you remove the screws in back.
Oh...
--
mine does it on the bottom.
it feels like there is a slight gap in between the bottom bezel and the screen.
It's not a problem at all, but it sure is annoying at times.
On the left side of my HD2 the screen is easier to push in at the top and bottom, but it takes a lot of pressure to make it "squeak".
If I had a cosmetic issue, you can bet I would be on a waiting list to get a replacement. The looks on these phones are nearly as important as the performance, IMHO.
oh i deff agree, @op, if you only just got it id be trying to take it back.
Same on mine at the bottom - just barely - if you slightly press between the usb and headphone jack you hear a slight (guess it sounds like) a click and you feel it slightly move. When the usb jack is plugged in it stops Some play and I don't think its worth returning - also don't think it will get worse. Case materials should have been a little more rigid. Think if you get a hard shell case or aluminum skin - when they become available you won't notice it. Talking to other guys with the HTC branded Euro version their build quality is a bit better. Think its pretty much the same with all HTC stuff - their branded models (TYTN TYTN II etc.) were build better than the AT&T versions - they also cost a lot more because they aren't subsidized.
Personally feel the HD2 of all the MS phones with the exception of the HTC TYTN I is the most solid. The Fuze which I just got rid of was probably the worst. The case was ok but the front keypad was pure junk - out of the box the thing felt like it was going to break and it never sat "square" in its opening. The USB ports on all of them were really weak and were super loose out of the box. The slide out keyboards always loosened up and had too much play.
stim141 said:
Personally feel the HD2 of all the MS phones with the exception of the HTC TYTN I is the most solid. The Fuze which I just got rid of was probably the worst. The case was ok but the front keypad was pure junk - out of the box the thing felt like it was going to break and it never sat "square" in its opening. The USB ports on all of them were really weak and were super loose out of the box. The slide out keyboards always loosened up and had too much play.
Click to expand...
Click to collapse
For me, the Touch Pro 2 has top honors when it comes to "feeling" solid. My sister dropped it the other day and cracked the bevel, with a large triangle missing near the volume rocker and three other cracks on the bottom, top and opposite side.
I am encouraging her to return it and claim the insurance, but since there is no change in the quality of the phone's operation, she wants to keep it.
Again, for me, the TP2 seems more solid than the HD2, but the HD2 is very well-built compared to other phones. I am so paranoid about even putting my phone down on a hard surface, due to the sharp edges of the camera mount and the light metal case.
I will be installing my new invisibleSHEILD as soon as sirphunkee and I can make the time to meet somewhere clean (I have a 2yo at home ). I imagine my paranoia will drop a bit then...
I dropped my phone while working out at the gym.
I was on the treadmill, and dropped the phone from my hand to the treadmill belt, then it flew out (i was running pretty fast at speed 7) and ended up hitting the wall behind me. Well, I freaked out and ran over to check on the phone.
Even though I had NO protection, the phone was perfectly fine. Only a tiny scratch that's barely visible on the top left bezel, and everything was fine.
I really was surprised at the sturdiness of the phone.
Snarksneeze said:
For me, the Touch Pro 2 has top honors when it comes to "feeling" solid. My sister dropped it the other day and cracked the bevel, with a large triangle missing near the volume rocker and three other cracks on the bottom, top and opposite side.
I am encouraging her to return it and claim the insurance, but since there is no change in the quality of the phone's operation, she wants to keep it.
Again, for me, the TP2 seems more solid than the HD2, but the HD2 is very well-built compared to other phones. I am so paranoid about even putting my phone down on a hard surface, due to the sharp edges of the camera mount and the light metal case.
I will be installing my new invisibleSHEILD as soon as sirphunkee and I can make the time to meet somewhere clean (I have a 2yo at home ). I imagine my paranoia will drop a bit then...
Click to expand...
Click to collapse
My TP2 fell out of my hand in a parking lot, the thing didn't hit hard, but it left a small scratch on the screen (it was visible, but wasn't too obvious) and then some nicks at the corners of the device. It did look used. I returned it to T-Mo (I was still within 14-day remorse period) and used the money I got back to get an HD2 instead (for some reason I didn't qualify for either the full or the 11 month upgrade price, only 50 bucks discount... now that I think about it, I should have gotten it at full price, also, the day after it arrived (ordered online) T-Mo came out with the 2 for 1 smartphone, but alas, a new line was needed and I had no use for it).
I've dropped my HD2 at least 4 times since and there's not a nick on it. I figure the glass screen helps (as opposed to the TP2's plastic), even if it's a finger print magnet. I also have no problems with the screen or bezel being uneven, even after dropping it, nor have I had any single of the problems people complain about, so, go figure, I got the perfect production HD2.
Whew.... OK. Soooo glad to hear this isnt only my device. Mines is on the bottom. I also dont see it getting any worst and its so minor right now its probably not worth the hassle of returning. I tend to keep the gel case on it anyway..
thrashingdeth said:
thats how mine is but in the bottom. not a big deal but i did feel it
Click to expand...
Click to collapse
x2 same as mines.
--
I had an issue with mine creaking, on the bottom. Mainly when I was pressing the start key, or back. Got a replacement and it seems better. For a phone seriously delayed I don't get how the quality is so terrible.
my first hd2 the camera lens started to rattle tmobile replaced it
Tm5078 said:
my first hd2 the camera lens started to rattle tmobile replaced it
Click to expand...
Click to collapse
Was it the camera lens or the casing around the camera?
After watching the tear-down video I could see how the camera casing could be improperly installed and loosen after a bit of handling, but I thought the lens was pretty solid...
--
JWang158 said:
Seriously, this phone is turning out to be pretty half baked.
Click to expand...
Click to collapse
I disagree. Not sure if I got lucky or not, but my phone is in perfect condition despite being a month old and spending most of that time in my back pocket.
I've sat on it countless times, dropped it from my hand to the floor twice and dropped it from the car holder to the console in my vehicle so many times I can't count.
The only problem I have is with the SMS freeze, and I've solved 90% of that by keeping my inbox clean. If I have the money for a class 6 microSD card, I'd bet on having solved the other 10% of my problems.
Since upgrading my radio, I don't have any problems with dropped calls, missing texts, loss of 3G or any of the other popular issues that seem to be plaguing the new owners.
Since bad news always travels faster and wider than good news, one simply can't infer from the issues being discussed here that they are the norm. I would suspect a very small percentage of the HD2 owners frequent the forums here, and of those another small percentage are having hardware issues.
I've been through a few of these new phone releases here in the past and from my experience I would say that this is pretty normal for the first few months of a phone's release. In another month or so there will be a firmware upgrade to fix the freezing and icon switching, then a lot of the issues will switch from hardware to software. Soon after that, I expect everyone will be clamoring for the release of a Windows Phone 7 ROM, followed a few months later by a newer, faster phone that everyone will be switching to. A cycle, vicious but almost predictable.
There is already an active thread discussing the hinge issue. Please direct further discussion here. PS, you are lucky I did not just delete this entirely! ~TheRomMistress
Hey guys,
For those who own htc desire z, hows the hinge for you already? How long have you owned the device already?
Other than that, hows the speed performance for you guys? In terms of web browsing and opening applications?
Thanks for your time.
Sent from my HTC Desire
Speed for me is awesome, and I'm still at stock speed, not tried overclocking yet.
My hinge is fine, just the same as when I initially got the phone (about two and a half weeks ago).
Unless your phone is faulty, I think the only people who have a problem are some who want to use their phone while lying in bed and holding the phone right above them. I never use my phone like that.
steviewevie said:
I think the only people who have a problem are some who want to use their phone while lying in bed and holding the phone right above them. I never use my phone like that.
Click to expand...
Click to collapse
I do use it like this, every night, and no problem at all. The design is not faulty. When you hold it like that above your face whilst in bed the way the hand and fingers hold the device the screen stays open and does not fall down at all.
Every night I use it like this!
ayewhy said:
I do use it like this, every night, and no problem at all. The design is not faulty. When you hold it like that above your face whilst in bed the way the hand and fingers hold the device the screen stays open and does not fall down at all.
Click to expand...
Click to collapse
I know what you mean. I did actually try and the way I would hold the phone in that position it won't open for me either. Seems there are a few who hold their phone differently when laying down though, and then perhaps gravity means it does open.
steviewevie said:
...I think the only people who have a problem are some who want to use their phone while lying in bed and holding the phone right above them. I never use my phone like that.
Click to expand...
Click to collapse
Not strictly true. My hinge is fine - had the phone 9 days now and it's still as tight as it started out. My only problem is that the top half of the phone is not tight against the bottom half when it's closed - causing a tapping when using the touchscreen. I'm ok when I have a gel case on it which keeps the two halves separate and cushioned. Only problem is that this case makes it difficult to type on the top row of keys. I have another hard case which is thinner, but does not eliminate the tapping problem. I'm waiting for another case to arrive from the US which is rubber - hopefully will cushion like the gel, but be thin like the hard case.
I opted not change the phone since I have been told others have the same problem, and I didn't want to risk getting a loose hinge AS WELL AS the tapping...
At the end of the day this phone is pretty effing awesome otherwise (aside from a few little software issues - which will be fixed by devs on XDA no doubt), and I'm sure I will solve this problem one way or another, whether it's with a particular case, or worst comes to worst, sticking some of sort of thin cushioning material to the bottom of the top half of the phone - any suggestions, please feel free to let me know!!
I do wish HTC had just gone with a normal slider though, and this phone would be perfect.
My DZ is exactly as setspeed described..
I would add that while holding the DZ without the case mentioned by setspeed, it feels a bit like holding two thin phones combined together rather than one phone.
its really not as bad as it sounds but i would have liked it if there was some sort of latch or something to hold the screen tight to the keyboard while the device is closed.
I have the phone for two weeks now.. for the first couple of days I put a rubber case on it (the black case that T-Mobile sell for the G2) but i removed it very quickly as i felt it gave the phone a very bulky feeling to it.. the case is not very thin and the DZ is not the lightest of phones.
Im on the lookout for a thinner case too.. it would be great if there was a clear one as-well..
setspeed, please post your thoughts on the new case after you try it out
I also thought of adding some cushioning material to the bottom of the screen, I'm on the lookout for that as-well..
other than that, my hinge holds the screen tight in place while the device is open.. the screen opening while the phone is upside down is really not an issue.
I haven't rooted my phone yet, i don't really feel the need to.. I compared it to the old desire i bought for my girlfriend.
I think that the new Sense UI is a bit heavier on the system and so there are some places i feel the old desire is faster.
for example, when dragging down the notification view from the top of the screen, the new Sense gives you a list of recent apps used. sometimes it needs to populate that list and so dragging down the notification view is not as fluent as on the old desire. its not an issue because once it populates the list, it runs smooth very smooth as-well.
I think there is also a bit of lag while scrolling through menus. the lag clears after first scroll and then it runs smoothly again.
I'm sure that there are some optimized roms out there that take care of those small issues.
I had a hard time deciding which phone to buy - the old desire or the Z..
I'm actually really happy with my decision..
Its a very very good phone
Hope you found my thoughts useful
I'm pretty content with my Epic so far. I've had it since November and have had no major issues with it and any I did have I was able to fix (no gps after flash, fixed thanks to Epic community, unresponsive screen orientation, fixed thanks to epic community again).
But I'm noticing a potential problem that I'm afraid no one here will be able to fix.
One of the minor gripes I have with my Epic is that whenever I press the top right button on my phone to either lock or unlock it, I ever so slightly apply some pressure with my fingers as if I wanted to push the screen up to slide out the keyboard. The amount of pressure my fingers are giving is minuscule but I'm already noticing that my phone no longer is as firm as it was 90 days ago.
This troubles me because I hardly ever use the keyboard, in fact, I only used it several times the first month to try out some emulators but gave up on it because the keyboard just isnt that great for it. My fear is that this phone is going to get as loose as the epics you find at the Sprint stores in less than a year!
Dont get me wrong, I dont expect the sliding mechanism to be strong forever, but I am pretty surprised that the phone is already feeling loose and I dont even use the physical keyboard
My question to you all is are any of you experiencing the same problem? How about those who use the keyboard frequently? Is there any way we can "re-tighten" whatever it is that is getting loose??
My phone is only 2months old and when the keyboard is shut and you look at it from the volume side I have a huge gap there. The slider is a little loose not to bad. My problem is just the gap issue. If I press on the left side of my screen you can literally see the left side of the screen go down due to that gap. I'm gonna be exchanging it soon I just don't feel like it cause my setup is finished and I just dont feel like doing it again.
I notice the epic case set helps it from feeling as loose now.
Sent from my SPH-D700 using XDA App
musclehead84 said:
My phone is only 2months old and when the keyboard is shut and you look at it from the volume side I have a huge gap there. The slider is a little loose not to bad. My problem is just the gap issue. If I press on the left side of my screen you can literally see the left side of the screen go down due to that gap. I'm gonna be exchanging it soon I just don't feel like it cause my setup is finished and I just dont feel like doing it again.
Click to expand...
Click to collapse
You can backup your data to your pc..and when you get your new epic just throw it back in.
Sent from my SPH-D700 using XDA App
It is what it is...
There are multiple causes for the screen wobble effect, and once it gets loose, much like a fine woman's _____, there's not much you can do to fix the situation. I've read on here how people have taken their epic's apart to try and tighten the slider but it's just not possible unless you send it back to samsung to have them do it. However, there are a few solutions insofar as mitigating one's "noticing" it on a daily basis. Both the Otterbox and Seidio Active X are nice cases and once they are attached, there is not really any screen wobble effect due to the way the cases fit. Although, what most people don't realize is that most of the cheap cases that are available for the epic (including the ones at the sprint store and the non-platinum series cases at best buy) are actually to blame for creating the gap between the screen and keyboard in the first place. The way that they clip on to the phone is not very well thought out like on the more expensive cases and the clips sometimes overlap and are simply thicker than they need to be on most of the cheapo cases. I learned this the hard way with my first epic and when I figured it out it was still within the 30 day trial period Sprint gives you with their phones. So i took it back under "false pretenses" and told bestbuy that the earphone speaker quality was ****ty compared to my "friends" Epic and that i wanted to get a different Epic. I've been very careful about which cases I use on my phone from that point on. The Seidio innocase and active x, platinum series, and otterbox cases are all the ones i know for sure that won't cause a "gaping" effect on your phone. All the ones at the sprint store have a negative impact and even the otterbox does just a tad, mainly due to the side clips on the top bezel that clipon by the top row of numbers on the keyboard.
anyways, that's my 2cents
I picked up the Acer at BB last Friday and love it! I rooted it, increased the battery life, enabled Exchange, got Sync SMS and its the way I like it to be right now. I have been spending some quality time with it haha. I know it has its downsides but I was going to keep it regardless.
Today I notticed dust particles behind the screen glass and there is nothing that bugs me more about a device.. in fact I haven't had this happen since my Razr and I can't believe Acer would not seal the screen properly! This happens only after a week of use, I can only imagine how bad it would be after few months :-(
It looks like I should exchange it at least..
Anyways, does anyone have the same thing happening?
Not yet after almost 10 hours of use in the last 3 days. I have had the Acer sleeve on it since minute 1 though, maybe it will keep some of the dust out. Shoot some compressed air through the openings, maybe that will help.
That or search for a teardown video and blow the dust out that way.
Same problem here.
http://forum.xda-developers.com/showthread.php?t=1059266
silencer51 said:
Same problem here.
http://forum.xda-developers.com/showthread.php?t=1059266
Click to expand...
Click to collapse
I am exchanging mine for sure though I don't think it would make a difference as I believe more and more Acer half assed this otherwise great device
I find it hard to believe that dust would just appear under the screen, or rather, between the screen and the glass without some kind of interference from the user. Either leaving the SD cover open (maybe you removed the tape over the nonexistent sim slot), storing the tablet in an dusty place (and I mean, it's gotta be REALLY dusty) or blowing, without consideration, dust around the device. While the ports may not be 'sealed' they aren't that open to the environment.
Baring all that, the chances are that what you're seeing is actually debris from the manufacturing process which was already in the tablet and, through regular use, some of which made their way into that very tight spot. As hard as it is to believe that, its just as possible.
While both possibilities are valid, the chances are, neither of them will warrant an exchange.
Post back if they take it.
I'm anal when it comes to proper handling of my gadgets and I haven't removed the tape or left the cover open. I can't even be sure its dust I just know there are some things under the glass that weren't there yesterday. You make a valid point that it could be something that was already there. BB will either exchange it or I will return it and buy another one
Its only been a week since I bought it.
Sent from my HD2 using XDA Premium App
Well just got my a500
tested it straight out of the box and sure enough I have one tiny dust spec under the screen.
Otherwise no other issues.
I can also say looking at this screen against my transofrmer (that has mucho light bleed and also a dust spec and is creaky) that the screen is definitely not as nice. It is cooler in color though ironically with better blacks. Also the viewing angles while acceptable are not as nice.
Well Now I have a dilemma. I got a 32gb Acer for 30$ more than a 16gb Transformer.
Transgormer has nicer screen but suffers light bleed a dust spec and is a bit creaky.
IT is a bit lighter with over all nicer screen. IT also has the keyboard dock potential for future.
Second option is I keep the iconia which has more storage usb prot feels better in the hand and better built, but also has dust spec under screen.
I am not sure what to do. Afraid to exchange the iconia as given the track record on all these tablets, I run the risk of getting some light bleed or dead pixels etc.
SO do I just suck it up ignore the little pixel sized dust spec and live on?
Do I gamble and exchange? DO I return both wait till availability on transformer is better and perhaps with time they work through the build quality issues?
Or just use nothing, wait a month and get the galaxy tabb.
One thing for certain is galaxy tab will have nice or nicest screen will be thinnest and lightest and by being samsung will likely have more accessories like cases etc for it.
IT will likely cot a bit more (not too big an issue) and might not have much expandibility which may or may not be much of an issue as there will likey be accessory to dock to allow usb host etc.
The Razr HD series has been out for quite some time now. There was a lot of hype prior to launch of the phone. One of the biggest hypes was the phones construction, I have owned 3 smart phones before this and never used a case, and prior to owning the razr HD never cracked a screen. I have cracked 2 screens on this phone already. The first was 17 days after purchase the phone feel off my desk on to a shelf, it was a 1.5 foot drop, in the middle of the night the inside LCD cracked, had to go through insurance. The second time I place my phone on a flat surface and the inside LCD cracked again, The warranty was honored that time. There has to be something clearly wrong with the construction of the phone for the inside screen to crack so easily neither time was there any damage to the gorilla glass exterior. My second beef is the plastic around the bezel of the phone. The plastic sticks out higher than the screen and is a prime target for scratches and dents and is not by any means scratch or dent resistant. I'm not an engineer but when I looked at the phone before I bought it my gut told me that the plastic around the bezel was going to get messed up easily, motorola could have done a better job with that design and from a practical stand point the raised plastic is ergonomically uncomfortable. Aside from that the phone lacks accessories, I do not care for the cases offered and many of the companies I would be interested in getting a case from do not manufacture accessories for the razr hd series. Motorola themselves do not offer a dock for the phone and if they do I can not find it anywhere. Lastly the phone itself runs glitchy even with jellybeen and "butter" or whatever they call, rooting did not solve glitches nor should you be required to change a device from stock to get it to run at an acceptable level when it is sold for $700 plus. I have skipped frame rates hangs and freezes all the time. When using HDMI to my phone the screen gets cut off, why include if it doesn't work properly. The only thing on the phone that has lived up to expectations is the battery, however the battery takes FOREVER to charge, I never have the time to completely charge it and I do not like charging overnight.
I feel your pain man... well not tjat deep cause i havent cracked my phone but i am dissapointed at the HDMI resolution on YouTube and Vevo... plus the lack dock sucks 00===D - - MOTOROLA
Some unbelievable points raised here.... And please if you want people to respond learn proper grammar and paragraphing...
OK, first off, the cracked screen - you've made a fairly big assumption that because you've broken it twice, there must be something wrong with the construction of the phone. I'd be interested to see if others have any issues with it.
Your second issue, the raised plastic doesn't seem to be too big of an issue to me. I'm an electrician, and have my phone in my pocket all day (with no cover/case) and have no such issues around the raised plastic. I'm taking a real close look at it now, and there are no scratches on the edges, not too much dirt, no problems at all really. I think you're picking at straws looking for problems with your phone on the physical side of things...
I for one love the size of the phone, and how rigid it feels in my hand. Coming from an SGS2 (which back felt like soft plastic - because it was!) the solid feel of the phone is a godsend to me.
Motorola do offer a dock for the phone it's directly there on their website. (http://www.motorola.com.au/consumers/MOTOROLA-ESP-PEDESTAL-WITH-SMART-CHARGER/169654,en_AU,pd.html)
I did find the phone glitchy to begin with, but I also found my telstra SGS2 glitchy when it had bloatware on it. Remove the bloatware, remove the glitchiness. Rooting alone doesn't change any hardware/software characteristics of a phone...
I haven't used the HDMI out yet, but was interested in the ability to output video while also charging the phone.
Why wouldn't you want to charge a phone overnight? That sort of complaint is one of the more ridiculous ones I've ever read...
Working fine for me.
Just kidding. Just wanted to be the jerk who says that . I have gripes about it as well. Not many of them are the same as stated because of how I use the phone, and because I haven't had the internal or external glass crack, don't use the hdmi, and charge overnight, but it has been both nice to have and its had its dissapointments. The "project butter", which I think is just marketing BS to be honest, and the screen stutter is especially annoying. The camera was a huge let down as well. I wish I had researched the camera quality before buying, however that said I've made the best of it and have it syncing with the home server that cleans up the photos. When I first bought it, my biggest irritation was that there were no pull down toggles and as my first Motorola phone, its baffling that it wouldn't be included regardless of a dedicated screen on the default launcher. I didn't even know that there were toggle apps on the market and just assumed that they were part of Android so I was really happy to find them. As for the plastic being raised above the screen, and touching on accessories, I found it next to impossible to even find a case and screen cover and had to go online and of the local stores found 3 cases. One looked like crap and I bought the other two. One didn't fit properly and luckily the last one fit very well while offering good protection and improved grip and doesn't add much bulk to the phone. I haven't had the time to scratch the plastic up because I found cases. Selection did suck. I reckoned, though, when I saw it that a raised plastic around the glass might serve to help stop it from breaking if it falls as it wouldn't land directly on the glass. The phone is heavy and glass breaks regardless of how you make it (glass is glass at the end of the day).
I'm also dissapointed.
On the plus side, the stock build with a better launcher is, on my carrier which is Telstra, anyway, is somewhat bloat free in comparision to a lot of other manufactures and I find that once its set up to my liking, my only real gripe left is the camera, the lack of community and development, here on XDA, with the phone, and indeed the lack of accessories. If I had the cracing problem that you did I'd be pissed the hell off though.
I came to this phone from the galaxy s2 and if I had to make a recommendation between the two I'd tell people to get the galaxy s2 (older and probably now very affordable) along with the Samsung extendable battery and then to find a custom Samsung based ROM that suits them and is stripped down of bloatware. The only saving thing about the phone now is that I'm used to it; battery life is really good, and the galaxys2 display does look old now that I haven't used it in a while. The processor is noticably faster but it doesn't stop the wacky launcher jitters that turn up and I've been messing around with the values of a couple of governors recently because just knowing that the phone does crazy scaling when just sitting there looking at it drives me nuts.
One last thing I forgot is "No Goggle Wallet? What the FREAKING HELL is nfc even for then?"
Downgrade to ICS and solve all your lag and hdmi issues. The thing is, your phone might have come deffective but that doesn't mean ours are. Mine works great and I feel proud of Motorola.
Verizon's OTA this week solved most of the issues including hdmi and lag.
Cases like yours happen all the time to everyone with every phone. It's not the manufacturer's problem. It's a combination of bad luck and being in the wrong place at the wrong time. My recommendation is to charge the phone with a stock charger. It took hours for me with an old motorola charger and using the stock one solved this. Go to ICS if U want real hdmi and less lag.
mtvdeo said:
Downgrade to ICS and solve all your lag and hdmi issues. The thing is, your phone might have come deffective but that doesn't mean ours are. Mine works great and I feel proud of Motorola.
Verizon's OTA this week solved most of the issues including hdmi and lag.
Cases like yours happen all the time to everyone with every phone. It's not the manufacturer's problem. It's a combination of bad luck and being in the wrong place at the wrong time. My recommendation is to charge the phone with a stock charger. It took hours for me with an old motorola charger and using the stock one solved this. Go to ICS if U want real hdmi and less lag.
Click to expand...
Click to collapse
HDMI works perfect on ICS 4.0.4 but stay on ICS Really? Then i wont have any custom roms because everyone is going to work with JellyBean... im just going to pray that these heavenly devs figure out how to fix this in the future and the mean time im going to still use my OG Razr maxx which just got JB 4.1.2 also
razzrmaxx said:
HDMI works perfect on ICS 4.0.4 but stay on ICS Really? Then i wont have any custom roms because everyone is going to work with JellyBean... im just going to pray that these heavenly devs figure out how to fix this in the future and the mean time im going to still use my OG Razr maxx which just got JB 4.1.2 also
Click to expand...
Click to collapse
Verizon fixed hdmi resolution on jelly bean 4.1.2
mtvdeo said:
Verizon fixed hdmi resolution on jelly bean 4.1.2
Click to expand...
Click to collapse
Ok thats aaaaall i needed to know thank you... updating!
My opinion ... don't buy the Nexus 4 !
:laugh:
Except for the glass, I have the same issues. Plastic bezel is really fragile. SIM tray seems to start to oxidize. I acidentally dropped a coin on the bezel and it dented. Both performance and battery were affected after jelly bean update. I have the phone for less than 4 months. At first I though the phone was incredible and strongly suggested my gf to buy it. Now I'm really disappointed. Motorola didn't managed to cover all the bases.
Apparently all phones are different cause I've had the phone a month or so with the Otter Box Defender and the phone is in mint condition after being in my destructive hands Still runs smooth as ever with lots of apps and music on it. Only complaint would be speaker volume.
Droid RAZR HD (current)
LG Optimus One P-504 (For Sale)
vctrrl said:
Except for the glass, I have the same issues. Plastic bezel is really fragile. SIM tray seems to start to oxidize. I acidentally dropped a coin on the bezel and it dented. Both performance and battery were affected after jelly bean update. I have the phone for less than 4 months. At first I though the phone was incredible and strongly suggested my gf to buy it. Now I'm really disappointed. Motorola didn't managed to cover all the bases.
Click to expand...
Click to collapse
as i was reading this post i dropped my cell about 3 1/2 feet high and it landed on a custom made computer with a metal cover because my 1 1/2 yr old son tripped me... i it landed face 1st halfway on the edge then to the ground... no scratch
I dropped my phone from about five feet onto concrete (the one time I didn't have an Otterbox on it!), some scratches near the top by the battery - but the phone is in perfect working condition.
I am rough with phones and have had the razr HD for 4 months without a cracked screen or any scratches. The bevelled plastic lip on the out side of the screen is a great idea, it means you can lay the phone flat on its screen without getting any surface scratches.
The razr HD is a great phone, the best available handset on any plan in Australia at the moment. Amazing battery life, the o.s is smooth and lite, 4G is fast and the handset feels strong & it looks great. The only complaint I have is sometimes switching wireless on can be buggy, but my previous phone (htc desire) had this same issue so it maybe an android issue..
krucifix85 said:
Some unbelievable points raised here.... And please if you want people to respond learn proper grammar and paragraphing...
OK, first off, the cracked screen - you've made a fairly big assumption that because you've broken it twice, there must be something wrong with the construction of the phone. I'd be interested to see if others have any issues with it.
Your second issue, the raised plastic doesn't seem to be too big of an issue to me. I'm an electrician, and have my phone in my pocket all day (with no cover/case) and have no such issues around the raised plastic. I'm taking a real close look at it now, and there are no scratches on the edges, not too much dirt, no problems at all really. I think you're picking at straws looking for problems with your phone on the physical side of things...
I for one love the size of the phone, and how rigid it feels in my hand. Coming from an SGS2 (which back felt like soft plastic - because it was!) the solid feel of the phone is a godsend to me.
Motorola do offer a dock for the phone it's directly there on their website. (http://www.motorola.com.au/consumers/MOTOROLA-ESP-PEDESTAL-WITH-SMART-CHARGER/169654,en_AU,pd.html)
I did find the phone glitchy to begin with, but I also found my telstra SGS2 glitchy when it had bloatware on it. Remove the bloatware, remove the glitchiness. Rooting alone doesn't change any hardware/software characteristics of a phone...
I haven't used the HDMI out yet, but was interested in the ability to output video while also charging the phone.
Why wouldn't you want to charge a phone overnight? That sort of complaint is one of the more ridiculous ones I've ever read...
Click to expand...
Click to collapse
I'm not looking for issues I am just simply calling them as I see them. I have thrown phones across the room, droid incredible, droid charge and have never broken my screen. I do not baby my phone. As for the plastic bezel my complaint stems from the replacement phone I have received. Less than 2 days after receiving it and not abusing or dropping it at all my phone has a nice mystery dent on the top. I'm glad that you love the phone and have not had any of the same issues as me. I went to link that you have provided and I didn't find a dock there. I did see a $40 plastic stand thats sold by motorola that will work with any phone or tablet. I am looking for a real dock that has male HDMI and charger plugs fitted for the RAZR HD series, Motorola seems to have docks for every phone they make with the exception of the Razr HD series. When I rooted my phone and froze all the bloatware with TI backup I didn't see much improvement over stock at all. If you think I am uneducated because of my grammar you are ignorent, there are topics other english in higher education, I choose to study math because I don't care for grammar. If you can read english I think you will understand me relatively well, I'm not Robert Frost but you can get my point. To the rest I apologize for my none use of paragraphs.
o2qc418 said:
My opinion ... don't buy the Nexus 4 !
:laugh:
Click to expand...
Click to collapse
amen
I have the SIII now and it's POS. Went back to my RAZR MAXX and fixing to buy the HD soon.
HDMI works
My girlfriends phone was 35 days old, never dropped, in a case from day 1. Screen cracked while it was just sitting there on the kitchen table. Brand new Razr HD.
SquireSCA said:
My girlfriends phone was 35 days old, never dropped, in a case from day 1. Screen cracked while it was just sitting there on the kitchen table. Brand new Razr HD.
Click to expand...
Click to collapse
I only see this happening if one were to take the phone from one extremity to another... Ae: hot to cold or cold to hot. Other than that I would guess the case is too tight on the phone?
Droid RAZR HD (current)
LG Optimus One P-504 (For Sale)
Very dissapointed myself. At first I loved this phone...no more.
The raised bezel is dented and scratched. I don't care about scratches since I refuse to use cases and it comes with the territory but the straight up gouges and dents are disconcerting.
Lag lag lag...not sure what project butter is cuz I've never seen this! Constantly redraws when going to home screen, browsers are slow sometimes, graphics stutter.
On top of that it doesn't function properly in my car for Bluetooth.
There are things I love about it, but its phones like this that give android the perception of being laggy and glitchy.
Its also disconcerting that moto put out an update and it still stutters same as always.
Sent from my DROID RAZR HD using xda app-developers app