Database Users

plzzzzzzzzz help with my dead gt540

i have lg gt540 and while updating to 2.1 with kdz tool the pc crashed now i cant turn on the phone...i hope some one help me with that

Have you tried updating again?

the problem the the phone dont open when i press power button there is nothing

what about when plugged into pc?

first thx for replying but there is nothing when i connect it to pc i think it needs abootloader.i hope u answer me

im afraid im pretty new to android ( gt540 is my first smartphone ) but anytime i updated, everything went ok, in fact yours is the first time i heard of a crash while updating so i cant give you much info but your in the right place, im sure the devs can figure something for you. just try remove the battery and then plug into your pc. and its not a problem replying just wish i could help.

well, did you try with the battery removed?

yes i did nd there is nothing

plz any one help in that

plz some one tell me how to make abootloader to it i have another lg gt540 i want to know if i can use it to repair the bootloader for this dead phone

The problem is theres noway u can acces inside the phone memory to patch bootloader. Go to lg waranty and tell them this happened when u were updating phone, dont tell them that pc crashed, tell them u updatet through lgsupport tool too, not through kdz updater they should fix it for u.
Sent from my GT540

thx for replying i will call them tomoorow i hope they will fix it for me... i want to ask if some one has passed with the same problem b4

Goto Emergency Mode, and upgrade from KDZ program. In KDZ program, you must setting Phone Mode to CS_Emergency. And flash agan.

i sent them email about the problem and this was the reply
Thank you for your email regarding this issue.
Unfortunately due to the nature of this issue, you will no longer be able to finish the update service. In this case you would be required to return to ourselves for servicing. To action this please contact the number below with your reciept and handset to hand.
If you have any further queries, please do not hesitate to contact us again.
Best regards,
LG Electronics UK Helpdesk
can any one tell me what should i do

Remove battery press volume - or + I can't remember try two options, then plug in usb.
You should see blue screen with DOWNLOAD or EMERGENCY MODE text.

i tried all keys combination nothing work

my mobile internet went dead after flashing quarx rom (I did it wrong btw...), but everything else worked fine.
I couldn't get mobile internet back on track no matter what (it was disabled in quick settings when I flashed quarx), I even tried factory reset and flashing the baltic rom. during the flashing, the kdz updater gave me an error close to the end, and my phone became stuck at the android screen.
even though I have CWR installed, so I could flash it again, I sent it to LG claiming I was updating through their website and since my phone doesn't start. I didn't tell them anything about the mobile internet not working. Hopefully they'll clean the phone completely and that will fix it.
I'll be picking up my phone after work today, I'll let you know how it went.

Same thing Happened to me n almost **** my pants for killing my brand new phone..
follow these steps
1. volume +or-(i dont remember) +camera n power on. it should turn on n say downloading mode.
2. update( you can use kdz updater, it probably wont crash this time but even if gets stuck just w8 for it)
3. after updating, remove the usb cable n turn on the phone, hopefully it would work
4. ENJOY ( N THINK TWICE BEFORE EFFING WITH THE PHONE, )
i am not sure about the keys for emergency/downloading mode(i think it was vol-) GOOGLE IT IF KEYS DONT WORK.

Put to microwave on 2 sec without battery and send do service

my service provider fixed my phone in 3 days without any issues, they flashed the t-mobile branded 2.1 on it. went home and now I have the open europe with fastboot and cwr.
so if all else fails, just send it to LG or your provider.
cheers!

Can Not even get into Download Mode

Initially i was able to get into Recovery Mode and was trap in Boot Loop but when i Flash a Rom from Dorky's with ODin 3 Even Boot Loop Goes away nothing appears except Black screen but can get into Download Mode
so tried another time with Odin 1.875 with some other Rom Odin first detected it and the when process Starts it gives error failed i restart process and nothing happens i took off the battery and replaced it and tried to get into Download Mode but nothing Happens:crying::crying::crying:
Galaxy Y s5360
Please help, u can help!!

xhizors111 said:
Initially i was able to get into Recovery Mode and was trap in Boot Loop but when i Flash a Rom from Dorky's with ODin 3 Even Boot Loop Goes away nothing appears except Black screen but can get into Download Mode
so tried another time with Odin 1.875 with some other Rom Odin first detected it and the when process Starts it gives error failed i restart process and nothing happens i took off the battery and replaced it and tried to get into Download Mode but nothing Happens:crying::crying::crying:
Galaxy Y s5360
Please help, u can help!!
Click to expand...
Click to collapse
Start calm.
All you need is a cool mind now.
Search for the USB JIGGS available on xda and see if someone from your area has it. You can then take help from that person. If not then just go to service center, tell them that it stuck like this while doing software update and act like you no nothing about rooting our flashing. That will do.
A Hero Can Be Anyone. GENERAL HELP THREAD

Is is still repairable
Bruce Wayne said:
Start calm.
All you need is a cool mind now.
Search for the USB JIGGS available on xda and see if someone from your area has it. You can then take help from that person. If not then just go to service center, tell them that it stuck like this while doing software update and act like you no nothing about rooting our flashing. That will do.
A Hero Can Be Anyone. GENERAL HELP THREAD
Click to expand...
Click to collapse
I am not thinking to use a jigg as even after i get into Download mode incase after jigg i would definately make situation more worse
is it repairable, when i connect it with Cable i can see it is searching for drivers so its not completely gone i guess,
will service center guys will able to repair it??

xhizors111 said:
I am not thinking to use a jigg as even after i get into Download mode incase after jigg i would definately make situation more worse
is it repairable, when i connect it with Cable i can see it is searching for drivers so its not completely gone i guess,
will service center guys will able to repair it??
Click to expand...
Click to collapse
Yes, offcouse.
Just let them be unaware of you knowing about root/cwm etc. just act dumb. If they get to know your warranty is already void, they will charge you money for repairing it.

Follow what bruce says..
Tell them u got an update in kies nd this happened
** rooting is new for me,
nd i am a noob to root....**

They said Board is damaged
They are saying board is damaged!
price to repair it is more than its second hand value in market
i took it from their and brought it home
i remember before giving them when i connect usb cable to it unknown device found is detected but now its not even showing that
i am developer guy so not a completely noob
i want to repair it not to replace its body parts
can someone help
please!

Please anyone!!
or do refer any book!

xhizors111 said:
They are saying board is damaged!
price to repair it is more than its second hand value in market
i took it from their and brought it home
i remember before giving them when i connect usb cable to it unknown device found is detected but now its not even showing that
i am developer guy so not a completely noob
i want to repair it not to replace its body parts
can someone help
please!
Click to expand...
Click to collapse
The last 'n' only hope left is this:-
Install ur phone specific driver on pc.
1. Take out battery, sim & sd card.
2. Open odin.exe on pc.
3. After this, connect the phone via USB cable to PC(yes! without battery,sim & sd card)
4. Press the download mode combo keys.
5. While keep pressing all those keys, insert the battery now.
6. Now, odin should detect ur phone so that u may get it updated with stock firmware.
And if this also doesn't work, then bro u might have lost it at all
Sent Via XDA™ Premium

Sos! Help: Broken download mode

Hi guys, so I flshed a wrong kdz file on my D801 wind canadian variant, no my phone stuck on LG logo boot screen with green led, i have no fastboot mode, no twrp recovery, I can just access default recovery to hard reset, when i try to enter download mode by pressing volume+ while pluging the phone to pc, it goes just to frst screen, i mean the download mode logo with blue dots!!!!
Please any help would be appreciated, I'm ready to pay for fixing it as i live in a country where my phone won't be fixed otherwise. please please.

Helppppppppppppppppppp Please please just answer me

Up up up up up up up up up up

devdassi said:
Up up up up up up up up up up
Click to expand...
Click to collapse
bud same thing happened to me. and unfortunatly there is no fix for this. everytime i turned my phone on i got the little android guy then it would stay on lg screen with blue and green LED. try download mode it goesto the first screen of little blue dots.
since warrenty should not be able to tell anything about root or etc. i sent it in. in the mean time i called my carrier company and they sent me out a new phone for 35$. but i have to send old one back wether it ges fixed or not.
sorry bud but there is no way back from that. even tho your computer gives it a port its not fully booting so you cant flash anything..... here is one last thing you can try................ this could be your only hope.......it didnt help me but it might work for you...
good luck
http://forum.xda-developers.com/showthread.php?t=2582142

jester12345 said:
bud same thing happened to me. and unfortunatly there is no fix for this. everytime i turned my phone on i got the little android guy then it would stay on lg screen with blue and green LED. try download mode it goesto the first screen of little blue dots.
since warrenty should not be able to tell anything about root or etc. i sent it in. in the mean time i called my carrier company and they sent me out a new phone for 35$. but i have to send old one back wether it ges fixed or not.
sorry bud but there is no way back from that. even tho your computer gives it a port its not fully booting so you cant flash anything..... here is one last thing you can try................ this could be your only hope.......it didnt help me but it might work for you...
good luck
http://forum.xda-developers.com/showthread.php?t=2582142
Click to expand...
Click to collapse
thank you so much sir for replying, what is really wierd is that when i connect it to my pc, kingo root detects it, and gives me the option to root, then the rootin process stops at fetching scripts.

I cannot read.

Gnarfsan said:
If you can do that, you should be able to fix it via that Ubuntu guide to restore the partitions I think...?
Link: http://forum.xda-developers.com/showthread.php?t=2582142
Sent from my LG-D802 using xda app-developers app
Click to expand...
Click to collapse
I was able to connect to pc like he was. And kingo saw it but about 2 mins everything failed. No matter what port name i gave is. Any flash tool as well. And ubuntu did not work for me. Altho i did suggest that ubuntu method just incase it does work for you. Exhaust all options before giving it up for repair or warrenty exchange good luck and i hope you are more secessful then i was. Altho rogers did send me out a new phone good luck

thank you guys , my phone when on lg logo, and connected to pc, i can see it in device manager under modem as LGE android net usb modem,
and under ports as LGE android serial port com 8, any chance or sign of live to my phone, as mentionned before, there is no waranty services in our country.

@ jester12345 Did ubuntu read your phone when you tried the method of flashing partitions?

devdassi said:
@ jester12345 Did ubuntu read your phone when you tried the method of flashing partitions?
Click to expand...
Click to collapse
No ubuntu did not see my phone. Only my pc did even tho my phone wouldnt finish booting.

Could there be a paid fix? I'm ready to pay to bring my phone to life again.

[Q] Any advice for bricked G2 [D802] make unbrick ?

Hi everyone, i have a G2(D802) which i have used for 5 years. Yesterday, when i turn off the screen then try to turn on it didn't. I tried to reset with holding power button like 20-25 seconds. It stucked at LG logo. After many reset nothing happened. Then this morning i could was able to open my phone, so i thought it was a problem about software things, so i backuped everything and change my rom(i was using Lineage 14.1 ) to Resurrection Remix. But same thing happened, when i turn off the screen it has gone again. So i decided to install stock rom back. But this time when i used Flash Tool 2014 and appropriate KDZ, it stacked at 4%, after trying different cables, ports,windows 7/xp and programs (like LG Mobile Support Tool, LG Up) in Device Manager it seemed as : "qualcomm hs-usb qdloader 9006" and no recovery mode no download mode, when i google this problem i found it named with "qhsusb_bulk" and i found this article and successfully recover download mode. Now in Device Manager it seems as "LGE AndroidNet USB Serial Port".
TLDR: I can only open download mode, no recovery, it stacked LG logo, when i use Flash Tool 2014 or LG Mobile Support Tool with different KDZ/TOT it stacked at 4%. What should i do? What's wrong with my phone? I need your help urgently because i have no other phone. Thank you for reading.

metobayrak said:
Hi everyone, i have a G2(D802) which i have used for 5 years. Yesterday, when i turn off the screen then try to turn on it didn't. I tried to reset with holding power button like 20-25 seconds. It stucked at LG logo. After many reset nothing happened. Then this morning i could was able to open my phone, so i thought it was a problem about software things, so i backuped everything and change my rom(i was using Lineage 14.1 ) to Resurrection Remix. But same thing happened, when i turn off the screen it has gone again. So i decided to install stock rom back. But this time when i used Flash Tool 2014 and appropriate KDZ, it stacked at 4%, after trying different cables, ports,windows 7/xp and programs (like LG Mobile Support Tool, LG Up) in Device Manager it seemed as : "qualcomm hs-usb qdloader 9006" and no recovery mode no download mode, when i google this problem i found it named with "qhsusb_bulk" and i found this article and successfully recover download mode. Now in Device Manager it seems as "LGE AndroidNet USB Serial Port".
TLDR: I can only open download mode, no recovery, it stacked LG logo, when i use Flash Tool 2014 or LG Mobile Support Tool with different KDZ/TOT it stacked at 4%. What should i do? What's wrong with my phone? I need your help urgently because i have no other phone. Thank you for reading.
Click to expand...
Click to collapse
hi there.. unfortunately LG did a mess in my opinion! After buying G2 and G Pad I will never buy LG again because of this..
anyway, assuming you're doing everything as described into the guides (like port COM 41, copy the right DLL file etc) there is one thing I would try in your situation: trying with a different PC, in particular a Windows 7 / XP one..
also I read that sometimes this issues was randomly gone after trying and trying and trying and trying and trying..! If available I would also try different KDZ firmware (but be sure it's for your model.. as long as it is it doesn't matter if it's JB, KK or LP)

brainvision said:
hi there.. unfortunately LG did a mess in my opinion! After buying G2 and G Pad I will never buy LG again because of this..
anyway, assuming you're doing everything as described into the guides (like port COM 41, copy the right DLL file etc) there is one thing I would try in your situation: trying with a different PC, in particular a Windows 7 / XP one..
also I read that sometimes this issues was randomly gone after trying and trying and trying and trying and trying..! If available I would also try different KDZ firmware (but be sure it's for your model.. as long as it is it doesn't matter if it's JB, KK or LP)
Click to expand...
Click to collapse
Thank you for your suggestion, after several hundred attempts i successfully go back to stock rom(an Indian stock rom which i found it in storagecow link), but the problem is; when i turn off the screen, i can not open again, and it restarts and stuck at lg logo. After hundred times reset, phone started normally, then i flash a twrp recovery (with autorec) and go recovery. This time twrp said Unable to Mount System,Storage etc. so twrp shows internal storage: 0mb and all folders(data,sdcard,system etc.) empty. I mean define this problem is very hard and i think it is very rare problem. I'm not sure which part of the phone is the problem. I don't know is this a hardware problem or a software(like wrong partition or something like that) problem.

metobayrak said:
Thank you for your suggestion, after several hundred attempts i successfully go back to stock rom(an Indian stock rom which i found it in storagecow link), but the problem is; when i turn off the screen, i can not open again, and it restarts and stuck at lg logo. After hundred times reset, phone started normally, then i flash a twrp recovery (with autorec) and go recovery. This time twrp said Unable to Mount System,Storage etc. so twrp shows internal storage: 0mb and all folders(data,sdcard,system etc.) empty. I mean define this problem is very hard and i think it is very rare problem. I'm not sure which part of the phone is the problem. I don't know is this a hardware problem or a software(like wrong partition or something like that) problem.
Click to expand...
Click to collapse
so ROM is flashed but no files are anywhere? Did the same happens when you browse the device with the windows command Prompt / Linux Terminal?
Yea anyway weird, maybe you can see if this tool has original partitions for your model: https://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076 - please pay attention if you do it and backup the partitions you have atm before

brainvision said:
so ROM is flashed but no files are anywhere? Did the same happens when you browse the device with the windows command Prompt / Linux Terminal?
Yea anyway weird, maybe you can see if this tool has original partitions for your model: https://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076 - please pay attention if you do it and backup the partitions you have atm before
Click to expand...
Click to collapse
I used this tool when my phone showed in Device Manager as : "qualcomm hs-usb qdloader 9006" and it worked, today when i opened my phone(after install stock rom again) i kept the screen always open. After 5 minutes, suddenly screen gone and stuck at lg logo. Now I think that the problem is definitely hardware. Because i did nothing and phone was connected with a cable to my pc. If the solution is to change a part(like the processor) inside the phone, I will write here what the problem part is. Thank you again.

metobayrak said:
I use this tool when my phone showed in Device Manager as : "qualcomm hs-usb qdloader 9006" and it worked, today when i open my phone(after install stock rom again) i kept the screen always open. After 5 minutes, suddenly screen gone and stuck at lg logo. Now I think that the problem is definitely hardware. Because i did nothing and phone was connected with a cable to my pc. If the solution is to change a part(like the processor) inside the phone, I will write here what the problem part is. Thank you again.
Click to expand...
Click to collapse
pretty sure it's the mainboard, I saw it's the first part of the G2 that gives problem after a while

brainvision said:
pretty sure it's the mainboard, I saw it's the first part of the G2 that gives problem after a while
Click to expand...
Click to collapse
I found the problem part. It's the eMMC chip. I disassemblied the phone and heat the relevant chip (on my motherboard the chip named as Toshiba) with hot air gun. My phone worked properly for 1 minute, then gone again.

metobayrak said:
I found the problem part. It's the eMMC chip. I disassemblied the phone and heat the relevant chip (on my motherboard the chip named as Toshiba) with hot air gun. My phone worked properly for 1 minute, then gone again.
Click to expand...
Click to collapse
you know what: I think my device has the same issue, eMMC is damaged.. I'm not using the G2 as primary or secondary device anymore but from time to time I like to flash something and using it.. but it's almost one year that when stuff I have no error but when I boot the device and start using it I have random reboots.. but they are totally random and almost happen when installing one app, using a system app or something like that. it happens with both stock firmware both with custom ROMs.. basically I have to flash and using the device for a day and if I have less then two reboots in that period I go on..
I'm not an expert about hardware matters, do you mind linking me a video on YouTube about what have you done with the airgun? Also I tried to search for spare eMMC but I wasn't able to find any (some time ago) so the option would be to change the motherboard.. did you find something instead?

brainvision said:
you know what: I think my device has the same issue, eMMC is damaged.. I'm not using the G2 as primary or secondary device anymore but from time to time I like to flash something and using it.. but it's almost one year that when stuff I have no error but when I boot the device and start using it I have random reboots.. but they are totally random and almost happen when installing one app, using a system app or something like that. it happens with both stock firmware both with custom ROMs.. basically I have to flash and using the device for a day and if I have less then two reboots in that period I go on..
I'm not an expert about hardware matters, do you mind linking me a video on YouTube about what have you done with the airgun? Also I tried to search for spare eMMC but I wasn't able to find any (some time ago) so the option would be to change the motherboard.. did you find something instead?
Click to expand...
Click to collapse
This is the video I get help with: https://www.youtube.com/watch?v=ft8V5yrQFic
this guy did this for g3 but doing for g2 also works. This is definitely a temporary solution. It works maybe just 1 minute (like me) or 1 hour if you are lucky maybe 1 month. Changing motherboard is primary solution but it is expensive and worthless. I think that is chronic problem for LG G series. There is no proper heat dissipation on the motherboard. They have just put thin metal plates. Maybe you can try after the heating process, just put a thermal pads the relevant chipsets. You can see from this video: https://www.youtube.com/watch?v=HMdvG6w7etU

metobayrak said:
This is the video I get help with: https://www.youtube.com/watch?v=ft8V5yrQFic
this guy did this for g3 but doing for g2 also works. This is definitely a temporary solution. It works maybe just 1 minute (like me) or 1 hour if you are lucky maybe 1 month. Changing motherboard is primary solution but it is expensive and worthless. I think that is chronic problem for LG G series. There is no proper heat dissipation on the motherboard. They have just put thin metal plates. Maybe you can try after the heating process, just put a thermal pads the relevant chipsets. You can see from this video: https://www.youtube.com/watch?v=HMdvG6w7etU
Click to expand...
Click to collapse
I thought about applying something (couldn't imagine what however) on the internal back of the cover but not because of the issues I have but simply because the device get hot very soon! I'
But basically you are saying that this issue related to the eMMC is not because the chip is damaged but only for the temperature it reaches?

brainvision said:
I thought about applying something (couldn't imagine what however) on the internal back of the cover but not because of the issues I have but simply because the device get hot very soon! I'
But basically you are saying that this issue related to the eMMC is not because the chip is damaged but only for the temperature it reaches?
Click to expand...
Click to collapse
Yes, because of the eMMC chip is damaged. But the crux of the problem is processor heats and cause of no proper heat dissipation this damages other chipsets. Thermal pad solution must be done after chip replacement.

unable to flash lenovo a1000

Hello everyone, so here i am trying to flash a friend's a1000, but unfortunately, i'm unable to do so because when i try to enter the bootloader by holding the volume up key before plugging in the usb cable to start the process, it only connects to the computer for about 9 seconds, and then automatically disconnects, i get a coloured screen afterwards, and i would be forced to restart the device, i first suspected that it was the cable, but i was wrong, since i've already tried a bunch of cables, all with the same exact result, i also used 3 different computers, and i still got the same result, please respond if you have any idea.

Sisine said:
Hello everyone, so here i am trying to flash a friend's a1000, but unfortunately, i'm unable to do so because when i try to enter the bootloader by holding the volume up key before plugging in the usb cable to start the process, it only connects to the computer for about 9 seconds, and then automatically disconnects, i get a coloured screen afterwards, and i would be forced to restart the device, i first suspected that it was the cable, but i was wrong, since i've already tried a bunch of cables, all with the same exact result, i also used 3 different computers, and i still got the same result, please respond if you have any idea.
Click to expand...
Click to collapse
you need drivers to flash it. i flashed mine in september 2021 and most drivers didnt work. i ended up getting drivers with the same name for a diffrent phone and the flash worked. so try doing that it might end up working. i dont how i did it but it was really hard

Vuk1152 said:
you need drivers to flash it. i flashed mine in september 2021 and most drivers didnt work. i ended up getting drivers with the same name for a diffrent phone and the flash worked. so try doing that it might end up working. i dont how i did it but it was really hard
Click to expand...
Click to collapse
You're right, it is hard indeed, i've already tried so many drivers, i think i'm giving up lol, thanks a lot for the reply, i really didn't expect one since that specific phone is ages old by now !

Sisine said:
You're right, it is hard indeed, i've already tried so many drivers, i think i'm giving up lol, thanks a lot for the reply, i really didn't expect one since that specific phone is ages old by now !
Click to expand...
Click to collapse
thanks. i replied this cause i have the same phone which i want to custom rom but there arent any roms available.(if you have any roms, please let me know)i can try to find you the youtube video i used for the drivers if you tell me what they are called. (if you want to xd) i think its something like "mediatek drivers"

Vuk1152 said:
thanks. i replied this cause i have the same phone which i want to custom rom but there arent any roms available.(if you have any roms, please let me know)i can try to find you the youtube video i used for the drivers if you tell me what they are called. (if you want to xd) i think its something like "mediatek drivers"
Click to expand...
Click to collapse
I appreciate that, i'll let you know if i find a compatible rom for the device, i think the drivers are called CDC drivers if i remember correctly, i don't have the files, but i'm almost sure it's CDC, i'll be grateful if you can send me a link to that video.

Sisine said:
I appreciate that, i'll let you know if i find a compatible rom for the device, i think the drivers are called CDC drivers if i remember correctly, i don't have the files, but i'm almost sure it's CDC, i'll be grateful if you can send me a link to that video.
Click to expand...
Click to collapse
i dont think i ever used that cdc thing when flashing that phone. im pretty sure i used https://firmwarefile.com/lenovo-a1000 to get the stock firmware and just searched up "(driver name) download" on youtube and used some indian guys tutorial. you can try this video if you havent alredy (for the cdc driver)

Vuk1152 said:
i dont think i ever used that cdc thing when flashing that phone. im pretty sure i used https://firmwarefile.com/lenovo-a1000 to get the stock firmware and just searched up "(driver name) download" on youtube and used some indian guys tutorial. you can try this video if you havent alredy (for the cdc driver)
Click to expand...
Click to collapse
I'll try that one, thank you.

Sisine said:
I'll try that one, thank you.
Click to expand...
Click to collapse
np

Do you guys still have the files?
I managed to get the proper drivers and the phone is seen by the computer and I manage to flash it , but the phone is completly dead after the flash .
The power button wont do anything, plugging it into the charger doesnt do anything, I can only reflash it by connecting it to the pc while holding the volume up & down buttons.
Checking on old forums, aparently there are two versions of the phone , single sim and dual sim.
Also the revision number seems to be important for some reason, so mines is dual sim , revision 61 .
I believe this was the firmware that was on it previously, although the phone remained stuck at the boot logo : a1000_usr_s29798_1511241708_sprd7731_ro , but i cant find it anywhere , so I flashed the one you guys had , but now the phone is a dead brick after the flashing ends . Nothing on the screen, no response from any of the buttons, just dead.

CurlyBlonde said:
Do you guys still have the files?
I managed to get the proper drivers and the phone is seen by the computer and I manage to flash it , but the phone is completly dead after the flash .
The power button wont do anything, plugging it into the charger doesnt do anything, I can only reflash it by connecting it to the pc while holding the volume up & down buttons.
Checking on old forums, aparently there are two versions of the phone , single sim and dual sim.
Also the revision number seems to be important for some reason, so mines is dual sim , revision 61 .
I believe this was the firmware that was on it previously, although the phone remained stuck at the boot logo : a1000_usr_s29798_1511241708_sprd7731_ro , but i cant find it anywhere , so I flashed the one you guys had , but now the phone is a dead brick after the flashing ends . Nothing on the screen, no response from any of the buttons, just dead.
Click to expand...
Click to collapse
sorry, i deleted my lenovo a1000 files to focus on other phones. from what i have heard that issue is common with that phone. i know someone who flashed the firmware on their a1000 and got stuck in the same issue as you. i tried to help them unbrick it but it seems to be impossible. i think you need to do a board replacement if you want to use that phone again. also, i dont think that the phone revisions are that important cause i managed to get lenovo a1000m firmware on my lenovo a1000.