Does anyone have the evdo settings for ntelos? whats the login information supposed to be [email protected]? I had a htc hero but it screwed up and started saying cellular south. If anyone could look in qpst it would be greatly appreciated! I switched phones and im trying to get evdo working. Thank you!
Do you mean MMS/WAP/BREW? there are no settings for EVDO, your PRL takes care of that. If it's really EVDO that doesn't work (only signal bars for 1X) check over at corolada
Cannot fix nTelos phones that switch to Cellular South!
jflka said:
Does anyone have the evdo settings for ntelos? whats the login information supposed to be [email protected]? I had a htc hero but it screwed up and started saying cellular south. If anyone could look in qpst it would be greatly appreciated! I switched phones and im trying to get evdo working. Thank you!
Click to expand...
Click to collapse
You tried the PRI fix, didn't you?
Background: HTC Hero has two basic radios, Sprint, and Cellular South. All the minor regional CDMA telcos (nTelos, Apallacian, etc) have their own radios flashed over the Cellular South radios.
If you did the PRI fix, it reflashed the nTelos radio to the default Cellular South settings and locks the radio against changes.
Here's my tip from (bad) experience: Run the Sprint 1.56 RUU and pull the battery as soon as it erases the boot sector. Then head to your nearest nTelos store (preferrably a small one without a repair center or knowledgeable employees). Tell them your phone stopped working. They should give you a replacement. If they ask anything that sounds intelligent about what you were doing, tell them that you were excited about hearing that 2.1 was coming out, and you were checking PRL and firmware updates a couple times a day. Tell them that it looked like it was doing something, rebooted, and stopped working.
I'm still not sure if nTelos reps are extremely customer service oriented or have no clue, but this line of $#!+ seems to work with them.
yea, i meant the apn settings, doesn anyone have them by any chance?
Under roaming settings I only have "home only" and "automatic." I want a "roaming only option," but it doesn't exist, so I have to do things the hard way. My goal is to change the PRL in my phone so that its roaming all the time, much like techknowfile does in his thread here.
However, I have had trouble finding the MSL for my phone. This guide doesn't work on my Incredible; I dial ##DATA# and hit "call" but nothing happens.
How do I find the MSL for my phone?
Also, is there a better way to force my Incredible to roam on Sprint?
Edit: The MSL is 000000! That's the kind of combination some idiot would have on his luggage! Thanks madman34!
Now, on to the PRL testing!
Verizon will charge you for roaming if the triangle shows up on your phone. You can open the prl files and change the roam number to 0 and it will not roam but still use the towers.
Download and install qstp
Download sprint evdo and verizon evdo prl from colorado prl.com
Open rl editor
File
Combination prl
Join
Pick your 2 prl files
Pick output name
Put on your sd card
Dial ##755#
Hit send
000000
Prl
Update prl
Pick the one you made
Menu button
Commit modifications
Phone will reboot
Watch for the roam triangle .
Hope this helps....
Sent from my HTC Incredible using Tapatalk
intenselyinsane said:
Verizon will charge you for roaming if the triangle shows up on your phone. You can open the prl files and change the roam number to 0 and it will not roam but still use the towers.
Download and install qstp
Download sprint evdo and verizon evdo prl from colorado prl.com
Click to expand...
Click to collapse
Thanks so much! I'm going to look into the voice and data roaming charges with my Verizon plan and see what the deal is. Thanks so much for outlining the whole process; here's the website for the PRLs: http://www.corolada.com/prl/
I'm trying to flash epic to another carrier(in china). I've already flashed the imsi, esn, akey, aaa userid, aaa passwd. Everything seems to be fine(calls, sms...), except the data service.
The connection is extremely slow(got about 125kbps down and 120 kbps up), it seems the epic is using 1x not ev-do.
When i set "HDR/1x Selection" in ##DATA# to "Evdo Only", the "3G" icon is still there. I dialed *#147852#, selected "Testing" then "Phone information", i found that the "Network type" is "1xRTT".
WTF, I'm really confused by epic.... Since there is absolutely nobody talking about Epic 4G in china and I know that no one could know more about this phone than you guys on XDA, I really need your help!
Sorry for being a noob and sorry for my stupid english, but i just want things to be done, PM or posting welcomed, Thank you!
Put the phone in airplane mode then bring it out to have it update the EVDO Only.
You also need to use CDMA workshop and copy NV Items 465, 466, 1192, and 1194. That will get you 3G speeds.
I believe you can also use QXDM for the NV items. But CDMA WS is way easier.
While on this subject,i read somewhere that there is a way to force Epic and Evo to use Verizon network without roaming charges(since sprint and verizon share same towers),im upstate ny and sprint 3g service is not that fast,i would like to try verizon and see if I get better speed.If anyone knows how to do that please post it on here.
RRexA3 said:
Put the phone in airplane mode then bring it out to have it update the EVDO Only.
Click to expand...
Click to collapse
thank you for you remind, i had a reboot and with no luck... i wonder if there are other NV-items than 465 466 1192 and 1194
This is not development. Remember everyone, post questions in general section, not development!
Thank you,
Korey
Thread moved to General.
I googled and can't find a download for verizon 2010 PRLs. Anyone have a link or can rip it from their phone??
noob_2010 said:
I googled and can't find a download for verizon 2010 PRLs. Anyone have a link or can rip it from their phone??
Click to expand...
Click to collapse
This is the Sprint Evo forum. Maybe try a Verizon forum?
I was thinking someone here already had it ripped out of a verizon phone for their use on the Evo too
HERE are a few Verizon PRL's I keep around. There is a 51926 in there, I think from June or July of this year. Also some 65 series PRL's, but I haven't used any of them. I can verify that at least in Vancouver, WA I get great voice and 3G signal with the 51 series PRL's, cant really tell the difference between them, 518, 516, 517, 519, all good for me. Roaming triangle taunts me the whole time though,
Also, link in my sig for some other PRL's for the VZW 3G hack.
JTNiggle said:
HERE are a few Verizon PRL's I keep around. There is a 51926 in there, I think from June or July of this year. Also some 65 series PRL's, but I haven't used any of them. I can verify that at least in Vancouver, WA I get great voice and 3G signal with the 51 series PRL's, cant really tell the difference between them, 518, 516, 517, 519, all good for me. Roaming triangle taunts me the whole time though,
Also, link in my sig for some other PRL's for the VZW 3G hack.
Click to expand...
Click to collapse
Thanks but i've tried 25 roams through out the month with altel/verizon and I always get 1x with 1 BAR. the only difference is some PRLs show the roam sign and others don't. This one even gave me the Roaming symbol.....What could the problem be????
I really don't know what the issue could be. I know that all the PRL's I linked will roam on 3G, so ???
JTNiggle said:
I really don't know what the issue could be. I know that all the PRL's I linked will roam on 3G, so ???
Click to expand...
Click to collapse
Well they jump back and forth from Evd and Evdo_A when I sit the phone with 1 bar. But if I try to use the phone it jumps back down to 1xrrt with 1 or 2 bars at times. I'm kind of new to the hacking scene but I think everyone thing is good on my end. Unless there are other things you suppose to do after changing your PRL?
I'm no hacker myself, so at this point I don't know what else to look at.
Whenever I run any of these PRL's, I always have my network set to Sprint only, I turn off data roaming and make sure always on mobile data is enabled. But, even at the worst, I get intermittent data loss, but never get anything other then 3g. Have you tried the 00001 and 01337 prl's from the roam hack thread?
For me, on CM6.1, if I run any of the verizon PRL's, and select Sprint Only in the wireless networks menu, I roam on VZW 3G. If I switch to Affiliated Networks setting, I will drop all signal cause it gets confused I guess. If I change back to a Sprint PRL, and Affiliated Networks, I get good voice signal, but show 1x for data. As soon as I put it back to Sprint only, my data returns to 3g.
On any new froyo sense rom, it's almost impossible to tell. A bug that seems like it may be intentional has popped up. My phone will not show 1x, but only 3g. Even when I'm on a sprint prl, and confirmed to be roaming, which would be 1x, It still shows 3g. I dug into the rom, and the icons are there, they just don't show up on a lot of sense rom's
How are you able to tell what evdo ur on? Are you on an Evo?
JTNiggle said:
I'm no hacker myself, so at this point I don't know what else to look at.
Whenever I run any of these PRL's, I always have my network set to Sprint only, I turn off data roaming and make sure always on mobile data is enabled. But, even at the worst, I get intermittent data loss, but never get anything other then 3g. Have you tried the 00001 and 01337 prl's from the roam hack thread?
For me, on CM6.1, if I run any of the verizon PRL's, and select Sprint Only in the wireless networks menu, I roam on VZW 3G. If I switch to Affiliated Networks setting, I will drop all signal cause it gets confused I guess. If I change back to a Sprint PRL, and Affiliated Networks, I get good voice signal, but show 1x for data. As soon as I put it back to Sprint only, my data returns to 3g.
On any new froyo sense rom, it's almost impossible to tell. A bug that seems like it may be intentional has popped up. My phone will not show 1x, but only 3g. Even when I'm on a sprint prl, and confirmed to be roaming, which would be 1x, It still shows 3g. I dug into the rom, and the icons are there, they just don't show up on a lot of sense rom's
How are you able to tell what evdo ur on? Are you on an Evo?
Click to expand...
Click to collapse
Theres a app called Cellumap and Phonestatus in the marketplace. It tells you the network your phone is on and cellular provider.
I'm using the sprint lovers CUSTOM rom. I guess I'll switch to cm6 custom rom like you are using and set it up like you mentioned. so I'll give this a try tommorow(sunday) and report back. but I think it's just the RURAL area I live in but then again Verizon has full coverage according to their map...
yeah, probably just ur area. You should call Verizon and tell them about the issue
You could say something like, "hey, I'm trying to use your expanded 3g service for free, but all I get is 1x. Can you give me an ETA as to when this will be fixed?" That would be fun!
I'll give those apps a try on my end and see what I get.
Well, I'm getting EVDO rev a on most of these. Provider shows digital roaming but still says Sprint. Confirmed speed tests at just under 1mbs and dialing a number without area code sends me to Verizon error message.
That is with the 51 and 41 PRL's.
Hey... This thing makes phone calls too!
JTNiggle said:
Well, I'm getting EVDO rev a on most of these. Provider shows digital roaming but still says Sprint. Confirmed speed tests at just under 1mbs and dialing a number without area code sends me to Verizon error message.
That is with the 51 and 41 PRL's.
Hey... This thing makes phone calls too!
Click to expand...
Click to collapse
Aw great for you ... well I'm installing this cyanogenmod6.1 custom rom and see what it does on a different rom I guess. If not I don't know what else I could, probably no roaming agreement with Verizon(altell had my area covered before Verizon bought them so Verizon really never had towers here....)
Ah, so that's why you were looking for the newest PRL. I would think you could get it to work with the right PRL.
Hey... This thing makes phone calls too!
I've been trying out a handful of PRLs the past few weeks with my new-ish Sprint Galaxy S3, but can't find the exact answers in many threads on PRLs here.
1) As a Sprint Airave user... I've wondering but can't find an aswer to the folllowing: Do Airave (femtocell) users get a specific PRL issued to them that incorporates the use of their specific Airave? The reason I ask, is that every alternate PRL I try, i get a roaming triangle with my Airrave. So can someone explain how PRLs work with femtocells? This might easily be explained by 'false positive' PRLs below. I can use my Airave with roaming triangles showing.
2) Some PRLs I've tried work 'properly' when it comes to graphics, aka show NON roaming when in 'the city', and roaming triangle in 'the country', but some PRLs show me a roaming triangle graphic no matter where I go (such as the Sprint corporate PRLs), but they work beautifully for me. Is there a way to know whether I'm truly roaming or not roaming when the 'roaming triangle' graphic' is showing? Some threads here and there mention 'false roaming', when you're actually on the Sprint network.
3) I assume it's the X network/towers that are recording my roaming data use (getting data disclosed to Sprint via contracts with others who allow them to roam onto their towers). This would be dependent on the network data/info given to Sprint/recorded by Sprint for a specifically ID'd phone, not anything that our phone actually records and relays to Sprint. Aka, Sprint doesn't grab roaming data from the phone but the data given to them by other companies that then enter the Sprint system for your phone/account. So, a false roaming triangle should not be a concern as long as we know we're on true Sprint network connection most of the time. So, even if we have the Roaming Status graphically showing, there's the possibility we should have no concern for the >300MB romaing issue. Correct? This of course depends on individual use of data on roaming towers.
4) This might be a device specific or carrier specific, not sure. Since trying out new PRLs with both CDMA Workshop and DMS, they all show me via 'read', a successfully installed PRL after a reboot. However, my Galaxy S3 ALWAYS shows a PRL '1' as the present PRL independent of which PRL is installed. At first I thought it was not sticking PRLs, but further testing of PRLs and using 2 destkop tools have shown that the PRLs are there via a 'read' function prior to attempting to write, and writing always looks successful via the desktop software. Are others noticing this exact issue on their Galaxy S3s? only Sprint GS3s? Most videos and threads show checking system status for a PRL to stick. I just want to confirm that others are gettings successful sticks w/o the settings screens saying otherwise.
Thanks for any feedback