Hello world,
since I installed V 1.2 of Tytunings HD2 ICS Rom I have no longer a working home button. Is there any setting which could be set? It still doesn't do anything if I flash back to V 1.1
Any advice?
Edit: I tried one more re-install (Wiped Cache+Dalvik cache before). Now I don't even have a statusbar anymore -.-
Edit2: I've installed the battery mod.. could be a reason?
Edit3: Done. Did a complete Reinstall with Task29.
Regards from Germany
Related
i had been flashing a bunch of roms and discoverd that i preferred the usa stock rom best, so i reflashed the stock rom and now the start button/home display wont. i cant use the btutton/the home display never appears..what do i have to do to fix/ does anybody know what's wrong?
Edit: actually i think i figured it out, it was the facebook tab cab i was attempting to install, after i installed that the home screen wouldn't work anymore. i hard resetted and tried again to install the cab but it happened again so im just going to delete it. but thanks anyways guys!
Flashed from DamageR_DCG v4.6 Eris Port to CYANOGEN V8 THEMED.
I wish I would have read this post before proceeding further with f*ing up my phone.
I think the following fix would have worked if I hadnt started flashing other roms to try to fix the issue myself.
["-Second: if unresponsive and showing 3G signal bypass setup by touching all four corners of the screen starting with the top left and going clockwise. At the bottom touch the screen just above the language and emergency call buttons."]
After flashing CYANOGEN V8 THEMED, I waited for it to start up and load. Unexpectedly, there was an android icon presented in the middle of the screen, with a hand directing me to touch it. I touched the android icon, it turned white, but that was the end of it. As soon as I let go of the screen, the icon would turn into its normal green and black color scheme. So i touched everywhere, haha, and rotated the screen and continued to press every available space on my phone's screen. I gave up and thought the rom, itself, was "broken". So I tried flashing my previous rom, and the trouble began. I am now experiencing an error message with each rom I try to use. It says "Sorry! The process android.process.acore has stopped unexpectedly. Please try again. Force close button". The error message listed above pops up whenever the phone starts, neither HTC Sense nor Nexus Home loads. I could use some help.
I will try looking for a newer rom version to flash, but I dont think it will work. ;(
**Update - Problem Solved - I did a factory reset/wipe, Dalvik-cache wipe, and proceeded with flashing a new rom.
**Thanks, gnarlyc, it was the Dalvik-cache wipe that fixed the problem.
Go back into recovery and wipe data and dalvik-cache and flash another ROM.
gnarlyc said:
Go back into recovery and wipe data and dalvik-cache and flash another ROM.
Click to expand...
Click to collapse
Okay, I wiped, and am now flashing CELB Froyo2.2.
I will update this post when it is finished.
Cyanogen tazz needs the Google apps flashed right after you flash the rom.
Then you have to wait a minute or so for the 3g icon to appear. Then you can tap the android and proceed with setup.
Tazz v1.0 is super stable and fast. I would try this rom again but make surer you flashed the right Google apps package.
Sent from my Cyanogen Froyo using Tapatalk
Thanks, gnarlyc, it was the Dalvik-cache wipe that fixed the problem.
akaarnaz said:
Thanks, gnarlyc, it was the Dalvik-cache wipe that fixed the problem.
Click to expand...
Click to collapse
Anytime. Been there myself. Not too long ago either.
It's currently 7am on monday morning, and I have college. I haven't slept at all because my [red lens] defy has been giving me problems.
I've been trying to re-flash CM7 to get a clean install of it, with no frills/apps that I've installed over time.
I've done a factory reset through CWM, and re-flashed CM7.1 from here:
http://download.cyanogenmod.com/?type=stable&device=umts_jordan
I've tried finding GApps for this, but to no avail. None of them install properly (CWM says they have, but actually hasn't - It's nowhere on my app drawer/home/manage apps).
I've tried adding an account to sync but when it asks what google products I want to install (such as YouTube, Maps, StreetView), it crashes mentioning "process com.teamdouche.pacman"
That's problem 1
Problem 2 is my Home and Search button no longer work! I've tried everything I could google for, but nothing has helped.
[Edit: they do vibrate, but nothing happens]
Any help on these matters would be much appreciated, as this is really annoying :/ Thanks.
Also I've just realised the apps in Manage Applications are all my old apps, even though I've actually formatted my SD card in CWM since, each has a SD card icon, and is taking up 0.00B space,but I'm just wondering how they even show there..
Did you try flashing the CM7 kernel ?
Or did you mount /system ?
Herpderp Defy.
Here's my About Phone info:
Android Version - 2.3.7
Baseband Version - EPU93_U_00.59.01
Kernel Version - 2.6.32.9-gb08c3c8 [email protected] #1
Mod version - CyanogenMod-7.2.0-RC1-Defy-KANG (CM7 White Rabbit)
http://forum.xda-developers.com/showthread.php?t=1510063 <- WhiteRabbit
Do you have a link to the CM7 Kernel? :S
System is mounted
I've managed to get Market installed, but it only opens once, and when I try to download something it Force Closes, and then after that it force closes when I open it.
Flash stock rom for noow ....
Sent from my MB525 using XDA App
dude, restore stock room, and try flashing an official cm7, what i think is that the room that you flashed is corrupted or something like that
1º: Reflash a stock room
2º: Get a official stable CM7 room ( http://download.cyanogenmod.com/?type=stable&device=umts_jordan )
3º: Don't forget to wipe all data, cache and dalvik cache.
4º: See if that works and thank me for this
EDIT:
Here is a link to Gapps, just in case (http://goo-inside.me/gapps/gapps-gb-20110828-signed.zip )
good luck with your defy
Hello,
I recently rooted my sgs4 gt-i9505 to the goolge edition using a YoTube tutorial on how to do so. Everything worked fine at the start but when I tried to install the PAC man rom, it jus stayed in the loading screen.
I restarted and tried rebooting but to no avail. I went back into the recovery mode and wiped the phone (divlac, cashes and system) then I reinstalled the google rom to find my wifi was not working. I tried the same process again, wipe- reinstall. Now I can't receive calls, the wifi doesn't work, home button only works on double tap, pull down status bar works but nothing in displayed.
My question is, does anyone have any ideas on how I would return my device to normal or know a full proof recovery and rom I can use that will correct these problems.
I am in the UK if that makes any difference.
Thanks for all and any help.
Matt
Matt.graham said:
Hello,
I recently rooted my sgs4 gt-i9505 to the goolge edition using a YoTube tutorial on how to do so. Everything worked fine at the start but when I tried to install the PAC man rom, it jus stayed in the loading screen.
I restarted and tried rebooting but to no avail. I went back into the recovery mode and wiped the phone (divlac, cashes and system) then I reinstalled the google rom to find my wifi was not working. I tried the same process again, wipe- reinstall. Now I can't receive calls, the wifi doesn't work, home button only works on double tap, pull down status bar works but nothing in displayed.
My question is, does anyone have any ideas on how I would return my device to normal or know a full proof recovery and rom I can use that will correct these problems.
I am in the UK if that makes any difference.
Thanks for all and any help.
Matt
Click to expand...
Click to collapse
You could try to go back to stock and check if everything still works there.
Did you flash the correct modem/baseband for the ROM / your carrier? There is a thread in general for all the modems. Chances are with a KitKat ROM you need to update your modem. Read that thread and give it a go. The file is about 15mb and takes a minute to flash in Odin. Failing that go back to stock.
Nothing in status bar: that's what it looks like in stock, you can use 2 fingers for the quick settins. Installl WANAM XPOSED fromwork for more tweaks and options!!
Home button double tap: that's the way it works on the google edition, that's just it. BUT wanam xposed can change this with the Gravity Box module!! You could try the Echoe 2.2 kitkat rom it has xposed pre-installed.
Keep in mind things look blanker and less functional as you no longer have samsung touchwiz which adds a LOT of stuff to the stock experience!
One more thing: ALWAYS make a nandroid backup before flashing ANYTHING at all, you never know when you will need it. Backup the nandroid to your PC also just in case, things go missing/ get deleted! T
Ok, I was running PA 4 Beta3 but was having problems with the screen delay so thought I would completly wipe my phone, fresh install PA and install the mini Gapps (I had prev installed the stock but didnt want all the apps)
Here is where it started to go wrong, Phone would not start ptopery, would get past animation screen but that was it, would then just crash with small date in corner.
Wiped and flashed just the Rom and this also failed.
Wiped and installed 3.99 and this seem to work but then the wizard crashed and I had to power down.
Booted back up into recovery and dirty flashed Beta 3 again and this seemed ok. Flashed Stock Gapps and rebooted.
All apps have installed again, titanium back has been run but I still have no network what so ever.,
If i go into settings, more, vpn, mobile networks I get 'unfortunately settings has stopped'.
I have dirty flashed again but still have same problem.
I cant do a complete wipe and install again as need to get out of the office, however with the prev problems I had I am weary about doing so.
Can anyone shed any light on any of the issues i had at all?
foxguard said:
Ok, I was running PA 4 Beta3 but was having problems with the screen delay so thought I would completly wipe my phone, fresh install PA and install the mini Gapps (I had prev installed the stock but didnt want all the apps)
Here is where it started to go wrong, Phone would not start ptopery, would get past animation screen but that was it, would then just crash with small date in corner.
Wiped and flashed just the Rom and this also failed.
Wiped and installed 3.99 and this seem to work but then the wizard crashed and I had to power down.
Booted back up into recovery and dirty flashed Beta 3 again and this seemed ok. Flashed Stock Gapps and rebooted.
All apps have installed again, titanium back has been run but I still have no network what so ever.,
If i go into settings, more, vpn, mobile networks I get 'unfortunately settings has stopped'.
I have dirty flashed again but still have same problem.
I cant do a complete wipe and install again as need to get out of the office, however with the prev problems I had I am weary about doing so.
Can anyone shed any light on any of the issues i had at all?
Click to expand...
Click to collapse
Sounds like a radio issue. If you are running 3.99, you need the radio for 4.3 which I do believe 3.99 is based on. You need the radio for KitKat when running the new betas.
Sent with my Nexus® 10 minus 3
This is the easiest way to flash a new radio http://forum.xda-developers.com/showthread.php?t=2607221
If you went up to a 4.4 based rom and it changed your radio to .97 or .98 then you'll need to flash back to a .84 or before.
to go back to 4.3.
I think I basically said that. Sometimes I believe in not holding hands and let the guy/gal do some of the, legwork.
Sent with my Nexus® 10 minus 3
Thank you every one. I have reverted back to my recovery and all is well but I don't understand why when I flash the ROM ad gapps it happens. My recovery is the same ROM and gapps. No idea.
Oh well stuck with the screen delay for now!
Sent from my Nexus 4 using Tapatalk
mrhiab said:
This is the easiest way to flash a new radio http://forum.xda-developers.com/showthread.php?t=2607221
If you went up to a 4.4 based rom and it changed your radio to .97 or .98 then you'll need to flash back to a .84 or before.
to go back to 4.3.
Click to expand...
Click to collapse
Hi mate, thanks for this. I have reflashed my phone again and still have the same problem. My baseband is showing as 84 though s that is correct?
EDIT, dont worry a reboot has fixed this issue. Odd.
Thanks again though.
foxguard said:
Hi mate, thanks for this. I have reflashed my phone again and still have the same problem. My baseband is showing as 84 though s that is correct?
EDIT, dont worry a reboot has fixed this issue. Odd.
Thanks again though.
Click to expand...
Click to collapse
Ohh you are having issues with ur network !! Seen people completely losing their Imei during flashing !! Not to scare you but its better to get the imei files backed up !!
Check my post on the below mentioned link
http://forum.xda-developers.com/showpost.php?p=49753344&postcount=11
Hit the thanks button if you find my post useful