This kernel has been released and updated in Korean local community.
Crackflashers, give it a try
If byeonggon personally open the thread, this one will be closed.
byeonggon's twitter
byeonggon's blog
Features:
Based on stock kernel
Kernel patched from 2.6.35.7 to 2.6.35.14
Added BLD, BLN, BLX, CustomVoltage, LiveOC, Touchwake
(thanks to Ezekeel, neldar)
Modified LiveOC
Added Voodoo Color and Voodoo Sound
(thanks to supercurio)
Added Governors
(interactiveX, lagfree, lazy, Smartass v2 and Intellidemand, Interactive, Lulzactive v2, Scary, Smartass) from AIR-Kernel, cm-kernel, SG-NS-ICS, GLaDOS. Thanks to Ezekeel, KalimochoAz, r_data, Steve Garon.
Added I/O Schedulers
(BFQ-v2-r1, SIO, VR)
Tweaked Governors - Consulted franciscofranco's tweak(thanks to franciscofranco)
(Conservative, Ondemand)
Kernel Samepage Merging(thanks to morfic)
[*]CPUIdle backport from 3.2 Kernel - Consulted SG-NS-ICS(thanks to Steve Garon)
or
Deepidle (Cherry-picked GLaDOS. Thanks to Ezekeel)
[*]Normal-Overclocked with LiveOC or Bus-Overclocked without LiveOC
Change battery percentage calculation.(thanks to KalimochoAz)
Increased frame rate to 65fps
SLQB Memory allocator.
BIGMEM support.
Optimized CRC32 algorithm
Optimized ARM RWSEM algorithm
and more tweaks...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Source Code:
https://github.com/byeonggon/lynx-nexus-s
Kernel Settings, use arifhn's NSTools
Download (only for GingerBread ROMs):
Lynx Kernel Download
Changelog
v1.5.0
Patched Simple I/O Scheduler(thanks to simone201)
Patch BCM4329's firmware(thanks to reddv1)
Patched Aries's Multitouch fix(thanks to reddv1)
Changed Kernel's Compression to XZ(thanks to KalimochoAz)
Bring over sleep crash fix(thanks to netarchy, Michael Huang)
LiveOC has Updated to compeleted version of Selective LiveOC
Removed 880MHz and Re-Added 800MHz(Bus-Overclocked)
v1.2.1
Fixed CPU Frequency Governor Smartassv2(thanks to abev66)
Removed Bus-OC's CPU Frequency 800MHz
Normal-OC has updated LiveOC to LiveOC with Selective LiveOC
Added Kernel Samepage Merging(KSM) - Thanks to morfic
v1.2
Fixed freezing issue.
CPU Frequency has divided into Normal-OC(100/200/400/800/1000/1100/1200/1400MHz) / Bus-OC(100/200/400/800/880/1100/1320MHz)
(Consulted Trinity-ns. Thanks to morfic).
※ Bus-OC doesn't have LiveOC.
Added CPUFreq Governors (Intellidemand, Interactive, Lulzactive v2, Scary, Smartass).
Tweaked CPUFreq Governor Lazy (thanks to Ezekeel)
Tweaked Scheduler Deadline (cherry-picked from franciscofranco's ICS Kernel. Thanks to franciscofranco)
Removed and Re-added stable tweaks (consulted, and cheery-picked franco-gb , GLaDOS. Thanks to Ezekeel, Franciscofranco)
v1.1
Added power saving state Deepidle version 2
Added OC frequency states 1.4GHz and 1.2GHz (cherry-picked from GLaDOS. Thanks to Ezekeel)
Added CPUFreq Governor Smartass v2
Removed CPUFreq Governor Lulzactive v2
Tweaked CPUFreq Governor Conservative From AIR Kernel (thanks to r_data(edoko))
Tweaked kernel (from franco kernel. Thanks to franciscofranco)
test build #23,#24
Removed Lulzactive
Added and Tweaked Smartass v2
Added CPU frequencies 1.2GHz and 1.4GHz
Rewrited Tweak codes
[*] - Build #23 has backported CPUIdle from 3.2 Kernel.
[*] - Build #24 has added Deepidle.
...
v1.0
Changed value MAX_CHARGINGLIMIT from 96 to 100 (BLX)
v1.0 Release Candidate
Fixed Google logo problem on booting
CPUIdle Backport from 3.2 Kernel
...
ReBuild_#12
Fixed SoD
ReBuild_#10
Again, Rebuild from scratch, based on AOSP
Removed Deep Idle
Added BFQ, VR I/O Scheduler
Re-Added CPUfreq governor 'lazy'
Stock kernel voltage
etc
...
...
Build #9T
Back to the Lucid's source
...
...
Build #16
Fixed reboot issues on some devices (reboot while calling)
Build #15
Rebuild from scratch, based on AOSP
Removed Deep Idle
Added Cpuidle backport from 3.2 Kernel
Added CPUfreq governor 'InteractiveX', 'lazy', 'minmax', 'Lagfree'
Added Ezekeel's new BLN - the blink interval and blink time
Tweaked Deadline (Francisco Franco)
Tweaked I/O, TCP/IP
Bigmem
Removed obsolete ****s
Added 1.1GHz frequency
etc
...
...
...
Build #7
Re-added Deep Idle
Lulzactive Governor default
Fixed reboot issue
Build #6
Removed Deep Idle
Build #5
Added SLQB Allocator.
Optimized sound driver
Build #4
Fixed SIO Scheduler
Removed obsolete modules
Build #3
Linux kernel 2.6.35.14
Removed Lazy governor
Removed 1.2GHz frequency
Build #2
Lulzactive Governor
Smartass v2 Governor
SIO Scheduler
Build #1
Added 1.2GHz frequency
Based on Lucid's source 3.0 ☞ http://twitter.com/reddv1
GB kernel!?
nexusphone said:
GB kernel!?
Click to expand...
Click to collapse
Yes! this is gb kernel
r_data said:
Yes! this is gb kernel
Click to expand...
Click to collapse
It's unusual to release GB kernel these days, "Age of ICS".
Actually, are still there the GB users?
nexusphone_user said:
Actually, are still there the GB users?
Click to expand...
Click to collapse
Yup. Still rocking the good old GB. Currently on Euroskank kangs.
Kernel updated
Build #15
Rebuild from scratch, based on AOSP
Removed Deep Idle
Added Cpuidle backport from 3.2 Kernel
Added CPUfreq governor 'InteractiveX', 'lazy', 'minmax', 'Lagfree'
Added Ezekeel's new BLN - the blink interval and blink time
Tweaked Deadline (Francisco Franco)
Tweaked I/O, TCP/IP
Bigmem
Removed obsolete ****s
Added 1.1GHz frequency
etc
Source
https://github.com/byeonggon/lynx-ns-gb
Lynx
kernel updated
Build #16
Fixed reboot issues on some devices (reboot while calling)
Stable : build #7
Any new updates on this one?
I'm using this kernel together with GalnetMIUI and so far everything is running great!
Thanks for sharing this here!
Sent from my Nexus S 4G using Tapatalk
Even in this day and age, Ginger Bread!?
Sent from my Nexus S using XDA App
Kernel updated
ReBuild_#12
Fixed the SoD
...
ReBuild_#10
Again, Rebuild from scratch, based on AOSP
Removed Deep Idle
Added BFQ, VR I/O Scheduler
Re-Added CPUfreq governor 'lazy'
Stock kernel voltage
etc
byeonggon's twitter
Source :
https://github.com/byeonggon/lynx-ns-gb
Stable : build #7
Will these kernels work for both NS and NS4G?
wmdunn said:
Will these kernels work for both NS and NS4G?
Click to expand...
Click to collapse
AFAIK, Korean variant is 9020 one model, so this kernel for that
Kernel updated
Lynx Kernel 1.0 Release Candidate
Fixed Google logo problem on booting
CPUIdle Backport from 3.2 Kernel
Download (only for GingerBread ROMs):
Lynx_kernel_v1.0_RC1.zip
kernel updated
[GB] Lynx Kernel Version 1.0
Source :
https://github.com/byeonggon/lynx-ns-gb
Kernel Settings, use arifhn's NSTools
Download (only for GingerBread ROMs):
http://www.mediafire.com/?7twoyw58g9357an
Not ICS but Ginger Bread!!!
Thanks for this!
thanks ...
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This kernel is based on Semaphore Kernel by stratosk with a few changes I felt to be missing in semaphore.
This kernel combines the speed and stability of semaphore along with few additions for the best combination.
It is compatible with all JB 4.3 ROMs based on official CM10.2 layout.
Kernel versions 2.9.0 and lower are compatible with JB 4.2.x.
Differences with Semaphore
Entropy tweaks
Patched for 720p usage
Kernel Samepage Merging (KSM) enabled
ZRAM enabled as module (usable via init.d script, attached below)
SWAP enabled
FRANDOM module included
Some Kernel Debug related stuff disabled
Wheatley Governor added (select via Setting->Performance-> CPU)
Intellidemand Governor added (select via Setting->Performance-> CPU)
Lulzactive Governor added (select via Setting->Performance-> CPU)
Lazy Governor added (select via Setting->Performance-> CPU)
Lagfree Governor added (select via Setting->Performance-> CPU)
Load_freq(4*HZ+61) to avoid Loadavg Moire
A bit more RAM ( 1MB more )
Read Ahead increased to 1024kB max
Using Neon instead of SoftVFP
Ondemand , Conservative , smartassv2 , lulzactive , lazy and interactive tweaked
ROW , SIO , SIOplus, Deadline , BFQ and CFQ Scheduler tweaked
Normal OC Steps ( upto 1400MHz )
XZ Compression for Kernel and initramfs
Optimized AES and SHA1 routines
CPU Unaligned Access
TUN enabled by default
Block and ROW improvements
BFQ IO Scheduler
FIFO IO Scheduler
ZEN IO Scheduler
VR IO Scheduler
SIOplus IO Scheduler
EXT4 patches
Other optimizations
Selective Live OC
ROW Updates
SIOPlus tweaks
Optimized Flags
SQLB Memory Allocator
GPU Driver updates
WiFi Driver updates
RCU updates
Disabled SAI
Dynamic Dirty Page Writebacks
TCP Tweaks
ION Patches
Click to expand...
Click to collapse
General Features
Based on Linux Kernel 3.0.99 and Semaphore 3.20s
397-409MB Usable RAM
Live OC ( Upto 130% )
Compiled with Cortex A8 Optimized Linaro GCC Toolchain
Click to expand...
Click to collapse
Thanks to
Stratosk for his source and all his help
Fishears for some of his code
kasper_h for some of his code
derteufel1980 for some of his code
Atomixxx and didhiy (for bootlogo)
Nick0703 for normal OC code
Christopher83 for toolchain
Franco's Dev Team [ malaroth, osm0sis, joaquinf, The Gingerbread Man, pkgnex, Khrushy, shreddintyres ]
All people on stratosk's list
All people who have inspired me , supported me and stood by me
Changelog of latest version
1. Updated Linux Kernel v3.0.99
2. Updated Ramdisk for 4.3 support
3. Lazy Cache Flushing on non-mapped pages
4. Yaffs Filesystem patches.
5. Bigmem patch updated for 4.3
6. FUSE FS now compiled into kernel
7. SIOPlus tweaks
8. Lagfree tweaks
9. Block update (recursively merge requests)
10. Dynamic management of Dirty Page Writebacks (thanks christopher83)
11. Tons of patches to ION
12. Build Logger into kernel
13. Using Latest 2013/09 Toolchain
14. Disabled In-Call Volume Control
15. Lots of other patches (see source for info)
Point to note
Ticking BigMem will break 720p recording
To control modules , please use script in SGS thread, and rest via NSTools.
All bug report of this kernel must be posted in this thread , with a clear description of the error , its reproducability , your ROM , any custom settings etc.
Please use it at your own risk! I am not responsible for any damage that may occur to your device.
Please note that I personally dont have a Captivate , I use the i9000, so that means , you tell me the bugs and issues.
Sources
CyanCore Kernel - Click Here
Semaphore Kernel - Click Here
ICS-Ramdisk - Click Here
Other versions
1. Galaxy S i9000 - Thread Link
2. Vibrant - Thread Link
Re: [JB 4.2][Kernel] CyanCore-cappy v1.5
very nice thanks for your hard work
Sent from my GT-i9000 using xda premium
Re: [JB 4.2][Kernel] CyanCore-cappy v1.5
Cool. So have you yourself been able to reach 130% or seen it done by anyone?
Sent from my SGH-I897 using xda app-developers app
good news
thanks man for your work
Darkangels6sic6 said:
Cool. So have you yourself been able to reach 130% or seen it done by anyone?
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
130% is the limit set in the kernel. I personally cant go above 114% and be stable , but I know a guy in i9000 forum whose phone is stable at 128% (with a few voltage changes).
I have benchmarked my i9000 with 130% OC(faced over 10 reboots before a successful benchmark) but it results in 6k + scores in antutu.
Without OC , it is about 4.4k , and with 114% , it varies from 4.9 to 5.3k with a peak score of 5433
Thank you very much for sharing this kernel! I have tried it and it shows good potential but I see a problem on my phone: I'm getting about 1sec black screen every time I dial a number, check e-mail, open maps etc... looks like on every app with screen refresh. Currently running unmodified SlimBean 4.2.1 stable. After flashing your kernel I did cache/dalvik clear + semaphore manager settings default. The only custom setting I have is 0.5X animations/transitions in developer options.
Re: [JB 4.2][Kernel] CyanCore-cappy v1.5
can you a rom for captivate.if that it will be famous and popular....
Sent from my SGH-I897 using xda premium
Please dont flash the 1.7 version , I messed something up. It wont boot up , and you will have to flash back to GB using Odin then.
I am making a fixed version now. Please wait for it.
Re: [JB 4.2][Kernel] CyanCore-cappy v1.7
I was able to flash semaphore kernel in Odin fixed it.
Sent from my SGH-I897 using Tapatalk 2
Cheers , fixed version of 1.7 uploaded and added to OP
Sorry, but i see only 1.5s version...?
Edit:
Also swap enabled, but not used?
C:\Users\Yuna\Desktop>adb shell free
total used free shared buffers
Mem: 407364 332292 75072 0 2696
-/+ buffers: 329596 77768
Swap: 0 0 0
Edit2: Don't see zram module in semaphore manager. Why trying to manualy enable it:
[email protected]:/system/lib/modules # insmod zram.ko
insmod zram.ko
insmod: init_module 'zram.ko' failed (No such file or directory)
Yuna said:
Sorry, but i see only 1.5s version...?
Edit:
Also swap enabled, but not used?
C:\Users\Yuna\Desktop>adb shell free
total used free shared buffers
Mem: 407364 332292 75072 0 2696
-/+ buffers: 329596 77768
Swap: 0 0 0
Edit2: Don't see zram module in semaphore manager. Why trying to manualy enable it:
[email protected]:/system/lib/modules # insmod zram.ko
insmod zram.ko
insmod: init_module 'zram.ko' failed (No such file or directory)
Click to expand...
Click to collapse
It is clearly written that ZRAM is enabled from Settings->Performance->Memory.
For SWAP to work , you need to partition your SD card and run swapon with that memory block .
I removed the 1.7 version cause WiFi wasnt working for some reason.
In settings i have zram enabled, but dont see it in /dev/block/zram0.
I confirm that ZRAM seems doesn't work neither if enabled in Settings->Performance->Memory, nor with the script below:
Code:
#!/system/bin/sh
echo $((70 * 1024 * 1024)) > /sys/block/zram0/disksize
mkswap /dev/block/zram0
swapon /dev/block/zram0
Command "free" in a terminal shows zeros.
But if me manualy insmod lzo_compress.ko lzo_decompress.ko e.g dependencies for zram.ko, then insmod zram.ko will load and /dev/block/zram0 will appear. so we need init.d script to handle this... again... I just wanted to use GUI for enabling zram...
Edit:
As temporary solution i am using this init.d script, and calling it 91zram.
Code:
#!/system/bin/sh
insmod /system/lib/modules/lzo_compress.ko
insmod /system/lib/modules/lzo_decompress.ko
insmod /system/lib/modules/zram.ko
echo $((70 * 1024 * 1024)) > /sys/block/zram0/disksize
mkswap /dev/block/zram0
swapon /dev/block/zram0
CyanCore 1.8 uploaded , fixed Wifi issues. Full changelog in OP
Re: [JB 4.2][Kernel] CyanCore-cappy v1.8
ts1506 said:
CyanCore 1.8 uploaded , fixed Wifi issues. Full changelog in OP
Click to expand...
Click to collapse
Nice to see more i9000 devs here. Thanks for the kernel.
Sent from my SGH-I897 using Tapatalk 2
Re: [JB 4.2][Kernel] CyanCore-cappy v1.8
sephhi said:
Nice to see more i9000 devs here. Thanks for the kernel.
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
The main issue an i9000 dev faces is that he / she can't test their works before releasing.
Sent from my GT-I9000 using xda app-developers app
Hi ts1506, thank you for the update and for your hard work! Can't wait for a normal OC ( upto 1400MHz ), that would be very cool.
I found the cause of ZRAM not working when enabled using the settings menu.
I will try to put out a new version soon with ZRAM fixed.
The sources are already fixed, so you can try to compile it yourself too.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
These builds are based on CM-13 nightlies with features cherry-picked from many sources including crDroid, SlimKAT, Omni, LiquidSmooth, Carbon, Nameless, Beanstalk etc.
All credit goes to @temasek for the ROM development also @arter97, who is head of optimization for ROM
Code:
/*
* Your warranty might/might not be void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
FEATURES :-
Marshmallow 6.0.1_r24
Floating Windows!!!
Statusbar Customizations
Clock Alignment
Battery Settings
Charging animations
Dotted circle battery settings
Battery colours
Battery bar
Statusbar greeting
Network Traffic
Statusbar Brightness control
Breathing Notifications
Quick Pull down
Smart Pull down
Quick Settings Management
Viper4Android
DPI Settings
Live Display
Ambient Display
Doze
Smart cover options
Lockscreen weather
Lockscreen colours
Middle and bottom shortcuts
Button Settings
Navigationbar customization
Slim PIE
Gesture Anywhere
Navigationring Targets
Animation Controls
Slim Recents
Omni Switch
Recents RAM Bar
HeadsUP Settings
App circle sidebar
Apps sidebar
Smart Control
many many more....
Downloads
Recommended Gapps
OpenGapps arm 6.0
INSTALLATION
- Wipe Data/Factory Reset
- Wipe System, Cache, Dalvik Cache
-Flash Rom
-Flash Gapps
-Flash custom kernel (optional)
-Flash MOD's (optional)
-Finally reboot and enjoy!
SOURCES:
temasek repos
Device
Kernel
Credits:
@temasek for development of rom
@arter97 for optimizing this rom
XDA:DevDB Information
[ROM][6.0.1_r10][UNOFFICAIL] Temasek CM13 [Jan 24], ROM for the Xiaomi Mi 3
Contributors
Shivam Kumar Jha, temasek, linuxxx
Source Code: https://github.com/temasek
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Custom Recovery
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2016-01-24
Last Updated 2016-01-24
SCREENSHOTS:
What Works?
Wifi
Mobile Network
Bluetooth
Every basic thing
etc..
Bugs?
USB OTG (fixed in 20160210 build)
Cannot change the network mobile type. Stuck at LTE. @storytellerz
Rest nothing seen,
You tell me...
I am not the official maintainer, I will share the builds whenever I can.
Works on stock partition or needs extended only...
anshude1 said:
Works on stock partition or needs extended only...
Click to expand...
Click to collapse
works on stock partition, from next build it will support extended only
Shivam Kumar Jha said:
works on stock partition, from next build it will support extended only
Click to expand...
Click to collapse
Thanks, will appreciate if you could build for stock also for updates...working on stock partition is not really a bug... It is a system design... Also moving to extended partition has caused issues to many people...
anshude1 said:
Thanks, will appreciate if you could build for stock also for updates...working on stock partition is not really a bug... It is a system design... Also moving to extended partition has caused issues to many people...
Click to expand...
Click to collapse
It's better for you to do the extended partition jump asap, even the coming miui MM is getting rid of the dual partition system.
In this way you will not have problems for flashing in future
Hello guyz, an update
temasek-cm-13.0-20160129-UNOFFICIAL-cancro.zip
Changes:
EXTENDED SYSTEM ONLY! (1.2 GB)
Based on latest sources.
Compiled with UBER TC 5.2.x
Inbuilt with Izer Kernel
Kernel Features:
Compiled with UBER TC 5.2.x
CPU Governors: intelliactive, darkness, yankactive, ondemandplus, smartmax_eps, impulse, pegasusq, nightmare, inteliimm, slim, zzmoove, smartmax, wheatley, intellidemand, interactive, conservative, ondemand, lionheart, performance
CPU Hotplug: MPDecision, IntelliPlug, MSM Hotplug, Mako Hotplug, Alucard Hotplug, AutoSMP
Minimum frequency of 27 MHz in GPU
Adreno Idler
DoubleTap2Wake
Sound Control
USB fast charge
I/O Scheduler: noop, deadline, row, cfq, fiops, bfq, sio, zen, tripndroid
Vibration Control
CRC control
Dynamic Fsync
Power suspend mode
TCP congestion algorithms: westwood, reno, bic, cubic, highspeed, hybla, htcp, vegas, scalable, lp, yeah, illnois
Wakelock: smb135x, sensor,ind, msm_hsic,host, wlan_rx, wlan_ctrl, wlan
SeLinux: Permissive
Frandom driver
F2FS
VNSWAP
Arch power
Larch power
fiio USB DAC driver
Fixed USB Leak
state notifier driver
zpool
CPU core control
Optimized Console FrameBuffer for upto 70% increase in Performance
Optimized task sched runtime
Shivam Kumar Jha said:
Hello guyz, an update
temasek-cm-13.0-20160129-UNOFFICIAL-cancro.zip
Changes:
EXTENDED SYSTEM ONLY!
Based on latest sources.
Compiled with UBER TC 5.2.x
Inbuilt with Izer Kernel
Kernel Features:
Compiled with UBER TC 5.2.x
CPU Governors: intelliactive, darkness, yankactive, ondemandplus, smartmax_eps, impulse, pegasusq, nightmare, inteliimm, slim, zzmoove, smartmax, wheatley, intellidemand, interactive, conservative, ondemand, lionheart, performance
CPU Hotplug: MPDecision, IntelliPlug, MSM Hotplug, Mako Hotplug, Alucard Hotplug, AutoSMP
Minimum frequency of 27 MHz in GPU
Adreno Idler
DoubleTap2Wake
Sound Control
USB fast charge
I/O Scheduler: noop, deadline, row, cfq, fiops, bfq, sio, zen, tripndroid
Vibration Control
CRC control
Dynamic Fsync
Power suspend mode
TCP congestion algorithms: westwood, reno, bic, cubic, highspeed, hybla, htcp, vegas, scalable, lp, yeah, illnois
Wakelock: smb135x, sensor,ind, msm_hsic,host, wlan_rx, wlan_ctrl, wlan
SeLinux: Permissive
Frandom driver
F2FS
VNSWAP
Arch power
Larch power
fiio USB DAC driver
Fixed USB Leak
state notifier driver
zpool
CPU core control
Optimized Console FrameBuffer for upto 70% increase in Performance
Optimized task sched runtime
Click to expand...
Click to collapse
extended means Repartitioned system partition (1.2Gb partition) or new Miui partition (i.e. ~1.5Gb system Partition)..?
palgaurav00196 said:
extended means Repartitioned system partition (1.2Gb partition) or new Miui partition (i.e. ~1.5Gb system Partition)..?
Click to expand...
Click to collapse
1.2 GB
Any plan for unofficial build of resurrection remix ROM
SamFox said:
Any plan for unofficial build of resurrection remix ROM
Click to expand...
Click to collapse
I use self build unofficial Ressurection Remix ROM as my daily driver but since there is already an unofficial thread I did not upload it..
if more interested users are there, then I can share it
Shivam Kumar Jha said:
I use self build unofficial Ressurection Remix ROM as my daily driver but since there is already an unofficial thread I did not upload it..
if more interested users are there, then I can share it
Click to expand...
Click to collapse
Yeah but development stopped by dev
So you can make thread after asking to RR dev:
SamFox said:
Yeah but development stopped by dev
So you can make thread after asking to RR dev:
Click to expand...
Click to collapse
Second this statement.
Is the battery life good?
SamFox said:
Yeah but development stopped by dev
So you can make thread after asking to RR dev:
Click to expand...
Click to collapse
Wohkay I'l see
BDW do I really have to ask the developer for creating a new unofficial thread?? I think anyone can share their personal builds as long as it follows GPL & XDA rules, so their should be no need of that.. Plz do notify me if i'm wrong..
storytellerz said:
Second this statement.
Click to expand...
Click to collapse
nimish77 said:
Is the battery life good?
Click to expand...
Click to collapse
yupp so far it has been really nice., you can always try for yourself
Shivam Kumar Jha said:
I use self build unofficial Ressurection Remix ROM as my daily driver but since there is already an unofficial thread I did not upload it..
if more interested users are there, then I can share it
Click to expand...
Click to collapse
more choice is always good! Please share if you can.
How to make the viper work? It always asking for install driver but then gets stuck & fc
Edit: it worked now
is it for the quad core model. my model number is mi 3w
Cannot change the network mobile type. Stuck at LTE.
Sent from my MI 3W
Can't change maximum CPU frequency.
Though I believe this is common now with CM13 specific ROMs. And seems like have to install custom kernel now.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
General
Working on All Moto Z Models
Working with all Lineage based Rom (can work on Stock Rom <- not confirmed)
Kernel Version : 3.18.70+
CAF Upstream Patches
Anykernel Installer
Fully working with Kernel Adiutor
CPU
CPU up to 2.15 GHz
ElementalX, Ondemand, Interactive, Performance, Conservative, dancedance, nightmare, powersave CPU Governors
Undervolt support with Kernel Adiutor (be careful, device is instable very fast)
CPU Input Boost
MSM Touch Boost
GPU
GPU up to 624 MHz
GPU down to 133 MHz
Adreno Idler
Adreno Boost
IO/Scheduler
ZEN, MAPLE, BFQ, SIO, SIOPLUS, VR, FIFO, TRIPNDROID and FIOPS
Filesystem
Fsync switch
EXT4 Filesystem
F2FS Filesystem
NTFS Filesystem R/W
HFS+ Filesystem R/W
Display
Sweep2wake, Doubletap2wake and Sweep2sleep
Display Backlight Dimmer
Display KCAL
Connection
new Wifi driver from CAF
more TCP Cong
Power/Wakelock
Powerefficient Workqueue
Wakelock switch
Quick Wakeup
Misc
FingerPrint as HomeButton on PowerButton
zRAM Support
optimized LMK
some Backports from Linux 4.4 and Linux 4.9
SafetyNet patched
more...
Build/System
optimized UBERTC 4.9.
-Ofast and graphite + pipe flag
optimized for Kryo
Ubuntu 16.10 Build System
Be careful!!! Make backup before flash. Please report if you find an issue. For now i use it with LOS 14.1.
Changelog
Download @ XDA
Thanks to:
LineageOS
flar2
UBERTC
more
XDA:DevDB Information
[KERNEL][3.18.70+]PhoeniX - fast/smooth/battery-friendly, Kernel for the Moto Z
Contributors
AuxXxilium
Source Code: http://build.webcs.one/AuxXxilium/kernel-msm
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: PhoeniX_2017_09_11
Stable Release Date: 2017-09-11
Created 2017-08-02
Last Updated 2017-09-11
Changelog and more...
Upcoming
PhoeniX_2017_XX_XX
back to HZ 300 - not noticeable slower but saves battery
PhoeniX-Light comes up (same performance, not full feature pack, close to stock los)
Changelog
PhoeniX_2017_09_11 <- wipe cache after install
enabled HMP Power Aware - group tasks to active cores (not freezed or inactive)
removed core_ctl from thermal driver
removed zRAM
added new LZ4 compressor
added drop caches while screen off
enabled strict aliasing
updated WiFi from CAF
removed camera debug
more CAF and Linux patches (camera, mdss, ...)
PhoeniX_2017_09_09
CPU Undervolt support with Kernel Adiutor (be careful, device can be instable very fast)
Linux 3.18.69 -> 3.18.70
use HZ=1000 (to try)
more build optimizations
switch back to Simple Thermal Control (for now)
PhoeniX_2017_09_08_optimized
added Zen Tune
added back Stock Thermal driver and disabled Simple Thermal
more...
PhoeniX_2017_09_08_fix
fixed Kernel Installer issue
added interface for showing cpu voltage (only showing not changing)
update BFQ to v8r10
removed KSM because of to high battery consumption
other fixes
PhoeniX_2017_09_08
reduced some voltages all over the board
patched crypto
merged binder from latest google source
merged f2fs-stable for 3.18.y
added KSM
more small fixes
PhoeniX_2017_09_07
VisionZ -> PhoeniX
only little tweaks
VisionZ_2017_09_06
Linux Upstream 3.18.68 -> 3.18.69
ASOC Backport from 4.4 Kernel
added MSM Simple Thermal Control
removed useless Core_Ctl
more...
VisionZ_2017_09_05_UP
Linux Upstream 3.18.31 -> 3.18.68
VisionZ_2017_09_05
defconfig change we have 4 cores not 8
VisionZ_2017_09_04
added some powersuspend patches
VisionZ_2017_09_03_BETA
backport binder from 4.9
removed EVBUG
removed IO sched switcher <- for now
removed EXT2/EXT3 support
added MSM Touchboost
added dynamic Slimbus scaling from MSM8998
added many CAF patches
lower GPU Idle step
switched back to -O3 flag
more backports
WiFi driver update
changelog is to big to write - look into kernel source - please
VisionZ_2017_09_02
full kernel rebased
VisionZ_2017_08_13a
little changes for a bit more smoothness
VisionZ_2017_08_13
add vr, fifo, sioplus and tripndroid io scheduler
VisionZ_2017_08_11a
more build optimization
VisionZ_2017_08_09c
more powersave patches
more optimization
VisionZ_2017_08_08a
powersave patches
LED Control
RCU Boost
new Buildsystem and more...
VisionZ_2017_08_06a - see screenshots: 151xxx in Antutu
Performance patches
new EXT4 driver
new Energy Model for MSM8996AB
more...
VisionZ_2017_08_06 / Smoothness is back!
Wifi-MAC-Fix
Buildoptimizations
cpuidle, scheduler, cpufreq patches
more...
VisionZ_2017_08_04
possible Wifi fix for STOCK rom
temperature fix while using
some logspam removed
some more patches
VisionZ_2017_08_02
new WiFi driver
Input Boost added
Touch Boost added
more performance and upstream patches
Reserved
good work thanks
谢谢大神编译
I did a quick test run just to check all the functions in EX kernel manager. Pretty nice.
I also checked the WiFi. It has the same issue as Lineage original kernel, a generic mac number. ElementalX kernel and latest TurboZ has proper mac numbers.
Sent from my XT1650-03 using Tapatalk
swejuggalo said:
I did a quick test run just to check all the functions in EX kernel manager. Pretty nice.
I also checked the WiFi. It has the same issue as Lineage original kernel, a generic mac number. ElementalX kernel and latest TurboZ has proper mac numbers.
Sent from my XT1650-03 using Tapatalk
Click to expand...
Click to collapse
thank you for report. i will give it a look and change it in my free time.
XT1650-05 The official system wifi can not open, hope to repair early
queenlsl said:
XT1650-05 The official system wifi can not open, hope to repair early
Click to expand...
Click to collapse
tried with *wipe cache*?
queenlsl said:
XT1650-05 The official system wifi can not open, hope to repair early
Click to expand...
Click to collapse
Just to confirm. Using stock firmware (7.0 or 7.1.1) or Lineage based ROM? Stock 7.1.1 does not seem to fully work with some custom kernels yet.
Sent from my XT1650-03 using Tapatalk
AuxXxilium said:
Upcoming
Undervolt
UBERTC 7.x
more powersave patches
more stability and performance patches
Version without CPU and GPU OC
Click to expand...
Click to collapse
Cool roadmap, looking forward to try this kernel
This kernel working for stock rom 7.1.1 ??
rakee said:
This kernel working for stock rom 7.1.1 ??
Click to expand...
Click to collapse
I have not tested but I assume it needs the updated kernel sources to be released from Motorola. Some (or all) kernels don't even boot with stock 7.1.1.
Sent from my XT1650-03 using Tapatalk
Hope to support the official 7.1.1 system, solve the brush after the camera can not be used
Was it safetynet patched?
jerryclho said:
Was it safetynet patched?
Click to expand...
Click to collapse
you can look in github. link is in first post. and if you don‘t know how: yes it is.
I really like how alive this kernel feels [emoji3] Always nice with new stuff
Sent from my XT1650-03 using Tapatalk
@AuxXxilium, are there problems with disabling cores/clusters?
I tried EX kernel manager and I like it.
I enabled the feature to disable the big cluster when in powersave mode.
But now cpu3 is offline, cpu0-2 are online.
I also cannot disable cpu0 and cpu2, I also cannot reenable cpu3.
cpu1 can be disabled and enabled without any problems.
Loader009 said:
@AuxXxilium, are there problems with disabling cores/clusters?
I tried EX kernel manager and I like it.
I enabled the feature to disable the big cluster when in powersave mode.
But now cpu3 is offline, cpu0-2 are online.
I also cannot disable cpu0 and cpu2, I also cannot reenable cpu3.
cpu1 can be disabled and enabled without any problems.
Click to expand...
Click to collapse
ok that's new. haven't tried it. :/ give me some days. a bit busy on msm8998 platform and work. i look to fix it as soon as i can.
Please take your time.
I will be on vacation in less than two weeks so I won't test too much and I will stay on a stable kernel for now
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I will not be held responsible for anything that happens to your device after flashing this kernel. If you don't know how to bring your dead device back to life please don't make any modifications and stay with stock MIUI. Also, if you think that overclocking can harm your device, overheat-it and possibly brick-it, send me a message and I'll be happy in informing you that My kernel's are SAFE.
My name is Luan, I live in a small city near the capital of my state in Brazil, I'm really young to be developing kernel for this phone, maybe even the most young recognized developer in xda :victory: . I'm only 15 years old and I love to compile kernels and reach the limits of the smartphone i'm using (in this case redmi 4x). I can also speak both English and Portuguese Brazillian, which is my "default language :laugh: ".
Kernel info
LH Kernel (aka HexaTurbo) kernel is meant to be simple with only cool features added on top of CAF kernel. Kernel source will always be kept in sync with new caf and mainstream linux (3.18.y) updates. Okay enough of the intro let's move on to the features!
*linux version 3.18.97
*GPU overclock support upto 600MHz
*sound control
*Custom I/O schedulers: sio and zen
*KCAL advanced color control
*disabled crc check
*force fast charge support
*FS: exfat, NTFS & sdcardfs support
*reduced load average
*Enable sha256/512
*KSM enabled
*Vibration control
*Clang compiled
*Using Xiaomi drivers
*Better audio drivers (Thanks to @LuizPauloDamaceno)
*Optimized
*Arch power option
*Gentle fair sleepers
*Better GPU usage and optimization
*CPU modded to go up to 1497mhz BIG and 1344mhz Little
*Zram
*Zwap
*Frontswap
*Using HZ 100 for UI smoothness
*A bunch of stuff here and there
-Download the zip file and save it into the root directory of internal/external storage
-Reboot to recovery mode and flash the zip file
-Reboot device
2018-03-04
Download Kernel
@LuizPauloDamaceno thanks for helping with quality and audio related stuff
@osm0sis for his amazing AnyKernel2 script
@rainforce279 for his awesome features
@EduardoNoyer for making this possible!
@Ashish94 for providing such useful scripts
XDA:DevDB Information
LH KERNEL OFFICIAL, Kernel for the Xiaomi Redmi 4X
Contributors
TecnoTailsPlays, rainforce279, LuizPauloDamaceno, NIkesh001 and Vimalraj1
Source Code: https://github.com/LuanHalaiko/msm-3.18
Kernel Special Features: GPU/CPU OC and much more!
Version Information
Status: Beta
Created 2018-01-21
Last Updated 2019-01-20
Kernel released!!
Using official drivers from xiaomi MiCode
Now being compiled with DragonTC
Changelog
-Rebased on 3.18.97 r33
-Better audio quality on headphones
-Improved Overclocking code
-CPU modded to run at 1497mhz BIG and 1344mhz LITTLE
-Suports every LineageOS 15.1 based roms and LineageOS 14.1 based ones, yes nougat is now supported
-Zram,Zswap,Zcache and frontswap added (Zswap is glitched for now)
-Using a really high touch response time, the UI is way smoother now
A bunch of stuff you guys need to figure out in Kernel Adiutor or EX Kernel manager
I removed 66hz overclock for now becouse of instability issues, it will be added back in the future
Bugs:
For now the navigation buttons can't be remmaped correctly becouse of the new touchscreen driver, to fix just:
rename ft5x06_ts.kl to ft5x06_720p.kl in system/usr/keylayout
Changelog 2018-25-01
-Added Intelli thermal
-Increased audio quality
-Unlocked qcom efuse1 1.5ghz and 1.2ghz clocks for msm8940
-GPU optimizations
-Ram overclock up to 1.2ghz from 921mhz
-Added adreno boost / adreno idler
-Added simple gpu algorithm
-Meltdown patch!
-Overcloked the screen to support 66hz!!!
-Cpu boost enabled
-Zram lz4 compression
-Kernel is now optmized for large apps with Uber Gcc 8.0.0
-CPU and RAM underclock / undervoltage down to 240mhz!!
-Added Async fsync from OnePlus
-Added Swipe 2 wake and double tap 2 wake
-Added a new battery charging technology "QNOVO"
-Added a lot of new TCP schedulers
-Added new I/O schedulers
-Added new cpu governors
-Added the new quick wake up driver
-Enable a sysfs interface for disabling CRC check
-Decreased kernel size
-Disabled Low memory killer for more apps open
-Added 1080 60fps and 4k 30fps recording (Needs a rom with support and camera 2 api)
-Slimbus overclock
-Custom cpu voltage control
And many many more under the hood changes!!
Woks well on NOS!! It solved my battery drain issue.. Tysm!!
Woah! That's amazing! Do you plan on adding CPU governors?
Can you also make it work for nougat too?
is it safe to be 600 mhz
---------- Post added at 04:23 AM ---------- Previous post was at 04:19 AM ----------
can u add cpu over and under clock and dt2w
Damn that's great. Once Gcam is fixed, I'll switch to Oreo + This kernel.
Will you make one for MIUI ?
I got the fpc fingerprint reader and it has a fingerprint delay problem when using custom kernel
I will be very appreciate if it can be fixed
Phuclun510 said:
Will you make one for MIUI ?
I got the fpc fingerprint reader and it has a fingerprint delay problem when using custom kernel
I will be very appreciate if it can be fixed
Click to expand...
Click to collapse
Is there miui rom with android oreo?
yogasetyaadi said:
Is there miui rom with android oreo?
Click to expand...
Click to collapse
Actually no
But i mean the features of this kernel is amazing
this kernel fix led baterry charging on LOS OREO?
@TecnoTailsPlays does this kernel fix the lagging problem while opening apps on Los 15.1? Cuz I face laggy when opening app or switching between task, its annoy me even its not a major bug
Good kernel !!! Please development oc cpu more 15xxghz , uv voltage thanks bro :3
---------- Post added at 11:20 AM ---------- Previous post was at 10:43 AM ----------
The kernel is very nice and smooth, the 3d point is high and the game is very smooth, hopefully the publisher will continue to develop more uv voltages and oc cpu , gpu :good::good::good:
I know you from Redmi 2 Kernel development and now you move to Santoni :good:
Btw, DT2W will be added in future?
Sent from my Redmi 4X using Tapatalk
Support on nitrogen os?
Thanks for sharing
---------- Post added at 11:04 AM ---------- Previous post was at 10:49 AM ----------
I got slow "wake up" when screen off using FP, any idea?
Cardinal-AOSP
Does the kernel work in Enforcing mode (SELinux)?
vincy009 said:
Support on nitrogen os?
Click to expand...
Click to collapse
Yes
BayuMustikaIP said:
this kernel fix led baterry charging on LOS OREO?
Click to expand...
Click to collapse
No, it doesnt
Anyone suggest best settings for balance and performance .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome in the Aspiration Kernel. This project consist to give a fast experience , smooth, and Stable with Many kernel feature inside.
Me and my collaborator,we are not responsible for any damage that may happen to your device.
We remind you that we are not care samsung , no one forces you to use the Aspiration Kernel . We share our rom with you for the pleasure of it .
STABLE | FAST | SOLID-BATTERY-LIFE |
VARIANTS SUPPORTED :
J200G
J200GU
J200F
J200M
KERNEL INFORMATION :
Built With: Google GCC 4.8 Toolchain
Kernel Base: G550FYXXU1BPFA
Ramdisk Base: G550FYXXU1BPFA
Linux Version: 3.10.9
FEATURES :
SELinux Permissive
GraceUX Ports Support
O3 Otimizations
UKSM (Ultra Kernel Sampage Merging)
KSM
Dynamic FSYNC
Real Time Battery Usage View
AIO Support
Sweep2Sleep
TCP Algorithms Enabled
Added CPU Governors
Added IO Schedulers
Added Powersuspend
Disabled Samsung Security Features
Added HID Gadget Keyboard / Mouse Patch
CRC Disabled By Default
List Of Included CPU Governors :
BIOSHOCK, CONSERVATIVEX, BLUACTIVE, PRESERVATIVE, HYPER, PEGASUSQ, INTELLIMM, DANCEDANCE, LIONHEART, WHEATLEY, INTELLIACTIVE, ONDEMANDPLUS, SMARTASS2, NIGHTMARE, DARKNESS, ALUCARD, PERFORMANCE, POWERSAVE, INTERACTIVE
List Of Included I/O Schedulers :
DEADLINE, TRIPNDROID, SIOPLUS, BFQ, BFQIO, VR, FIOPS, CFQ, SIO, FIFO, ZEN, BFQ
DOWNLOADS :
Aspiration Kernel V1
Aspiration Kernel V1.5
Aspiration Kernel V1.7
CREDITS :
Samsung OSRC
UpInTheAir
franciscofranco
TheSickness
AndreiLux
Thanks for support.You can donate me if you want! Every little penny is helpful to me.It'll at least help me to pay my server bill or wifi bill.
UPI: [email protected]
Paypal: [email protected]
XDA:DevDB Information
Aspiration Kernel V1.7, Kernel for the Samsung Galaxy J2
Contributors
Albe96
Kernel Special Features:
Version Information
Status: Alpha
Created 2018-06-26
Last Updated 2018-09-04
#Reserved1
#OneMore
Once again cool stuff! Keep up the good work?
magisk support?
like skies v2
| Aspiration Kernel V1.5 |
CHANGELOG :
Overclocked to 1.5GHz
UV to 200MHz
Claimed Some Free Ram
F2FS,NTFS,CIFS Support
Safetynet Fix: Hide Permissive
Ofast Optimizations
Frandom Support
CRC Configurable
Drivedroid Patch
Full N7 Port Support
Fix Magisk Installation Error
Enhanced Power Efficiency
DOWNLOAD :
Aspiration Kernel V1.5
Enjoy! Hit Thanks If You Like It! :good:
I flashed Aspiration v 1.5 in hades . But WiFi doesn't connect in that .it shows failed to obtain up address. Dev please look into to that. Hats off for safety net fix in Aspiration v1.5 ?
gokulm33 said:
I flashed Aspiration v 1.5 in hades . But WiFi doesn't connect in that .it shows failed to obtain up address. Dev please look into to that. Hats off for safety net fix in Aspiration v1.5 ?
Click to expand...
Click to collapse
Yeah,I've started v2 with fresh kernel source.Working from zero!
Albe96 said:
Yeah,I've started v2 with fresh kernel source.Working from zero!
Click to expand...
Click to collapse
Please do that safetynet thing in v2 also. It's nice no other mm kernels has that feature.
safety net
gokulm33 said:
I flashed Aspiration v 1.5 in hades . But WiFi doesn't connect in that .it shows failed to obtain up address. Dev please look into to that. Hats off for safety net fix in Aspiration v1.5
Click to expand...
Click to collapse
Sorry man. Do you mean, it pass the safety net check?
Cos im looking for ROM that can pass safety net in samsung J200G.
Thanks...
Sunxxxchokho said:
Sorry man. Do you mean, it pass the safety net check?
Cos im looking for ROM that can pass safety net in samsung J200G.
Thanks...
Click to expand...
Click to collapse
Yes it does pass Safety Net.But v1.5 has broken wifi.I'll look forward to fix asap
Please Develop V2 Wifi Problem Fix... I Love This kernel
Vivek1798 said:
Please Develop V2 Wifi Problem Fix... I Love This kernel ??
Click to expand...
Click to collapse
Thanks.But I'm not getting enough supports for my projects.So maybe I'll try to bring V2 and then discontinue it.Not sure though....
Eagerly waiting for V2..
When you are going to upload it??☺
Timilsina.bml05 said:
Eagerly waiting for V2..
When you are going to upload it??☺
Click to expand...
Click to collapse
Wifi Problem Fixed.But Safetynet doesn'y seemed to be working.So gonna fix that first.And I got exams and other projects to be done.So when I'm free.I'll post it up here! ?
Is this compatible with Stock ROM?
knnthgngb said:
Is this compatible with Stock ROM?
Click to expand...
Click to collapse
Stock ROM? Android Lollipop You Mean? Nope.It's a Marshmallow Kernel.Boots With MM Base
| Aspiration Kernel V1.6 |
CHANGELOG :
Fixed WiFi Failed Issue.
DOWNLOAD :
Aspiration Kernel V1.6
Enjoy! Hit Thanks If You Like It! :good:
| Aspiration Kernel V1.7 |
CHANGELOG :
Fixed WiFi Failed Issue.
Tweaked Ext4 Partitions.
Tweaked Default Prop And Remove SELinux & Knox Stuffs From Ramdisk.
DOWNLOAD :
Aspiration Kernel V1.7
Enjoy! Hit Thanks If You Like It! :good:
Will it work on any custom rom os 6.0.1