My wireless tether app for root users wasn't working (kept force closing) so I decided to just reflash the ROM I was then using (RegawMod). So, I downloaded it from xda, put it on my SD, flashed it, and everything was going well. I booted the phone up for the first time after I flashed it and I wouldn't boot, only cycle through the boot screen (the boot screen would appear, stay for a good ten minutes, then go black, and the boot screen would appear again..). So, I nandroided back to my stock 1.5, and that booted up just fine. I decided to try another ROM (DamageControl). I downloaded it, put it on my SD, flashed it, and again everything went well, but same problem, it will not get past the boot screen, just keeps cycling the boot screen over and over again..
So..what's wrong here? Can anyone help?
In the recovery go into wipe and click on every option in that menu.
Re: So I Think I Have A Problem...
did you wipe SD ext.
centran said:
In the recovery go into wipe and click on every option in that menu.
Click to expand...
Click to collapse
Did it. Lets see what happens..
EDIT: Good work, it booted up now!! Thanks guys, gotta love these forums!
I searched everywhere, but can't find the same problem as mine. I am stuck in the CW recovery screen, after rebooting times after times.
I have been updating the CM9 nightly for a while, didn't have any problem. But when I tried to flash 02-17 nightly, I messed up and in the middle of the install (flash), I hold the power forcing to reboot. Now, it keeps going loop back to the CW recovery screen every time I tried to reboot.
--
I tried to reinstall the whole thing with the boot-able sdcard, but didn't work. please help! someone?
I tried to wipe, reformatted the system, data, cash, boot. Still stack at the cw recovery screen. Help...
I love my nook and have a road trip coming up. It will be nice to watch a kid movie to keep the kids entertained.
Had you flashed CmWR into eMMC?
Check the ROM information on /dev/block/mmcblk0p2.... this sounds a LOT like the problem 12paq had...
http://forum.xda-developers.com/showthread.php?t=1495913
@Dizzyden, thanks for the tip.
I did repartition to 1g/5g awhile back. I am not sure where to start. 12paq tried many things, which one was the solution? Your rombackup.zip?
Many thanks....
@votinh
what do you mean? I am not using the N&O apps or OS. Pure CM9, therefore I guess it is flashed in eMMC. If not, please advice.
DizzyDen said:
Check the ROM information on /dev/block/mmcblk0p2.... this sounds a LOT like the problem 12paq had...
http://forum.xda-developers.com/showthread.php?t=1495913
Click to expand...
Click to collapse
how can I check this"Check the ROM information on /dev/block/mmcblk0p2"?
please advice.
I tried to adb shell the nook, but not devices found? please help.
Finally, with the help from the good people of this forum, I was able to restore back to B&N, and reflash CM9 from there.
Thank to you all.
Yesterday my nook color was working great. Today I turned the screen on and it hung. Now I'm having the above problem with it hanging at clockwork recovery.
I've got CM7.1 stable on there running from emmc.
can't get adb to recognize the device since it is in cwr... how did you do it?
chilimac02 said:
can't get adb to recognize the device since it is in cwr... how did you do it?
Click to expand...
Click to collapse
Install the google drivers for adb... if you are in CWR adb is enabled... just have to get the drivers loaded on your computer.
try this:
http://forum.xda-developers.com/showthread.php?t=958748
dumper1234 said:
I searched everywhere, but can't find the same problem as mine. I am stuck in the CW recovery screen, after rebooting times after times.
I have been updating the CM9 nightly for a while, didn't have any problem. But when I tried to flash 02-17 nightly, I messed up and in the middle of the install (flash), I hold the power forcing to reboot. Now, it keeps going loop back to the CW recovery screen every time I tried to reboot.
--
I tried to reinstall the whole thing with the boot-able sdcard, but didn't work. please help! someone?
I tried to wipe, reformatted the system, data, cash, boot. Still stack at the cw recovery screen. Help...
I love my nook and have a road trip coming up. It will be nice to watch a kid movie to keep the kids entertained.
Click to expand...
Click to collapse
It may be that your "boot to recovery" flag is set, and if so, it will always boot to that until it is cleared. When the cyanogenmod logo comes up hold the n button until the boot menu comes up. Then choose boot to emmc. If it works, go to ROM Manager and flash a new CWM Recovery to emmc.
Welcome to the nightmare I lived last week. Don't worry I woke up, was able to fully recover and forget the dream ever occurred.
I to tried to reformat to 1gb/5gb and ended up in the same boot loop.. If you are in the same spot I was, your boot partition got wiped out. And you may notice EMMC is gone.
After much searching I came across a file... Looking....Looking...Looking...
..........................Ah yes here it is. Here is what worked for me.
1. Boot to recovery (Should be easy at this point)
2. Format System, Data, and Cache.
3. Install the attached Zip file. (RecoveryFix.zip), this should recreate the Boot partition and fix the EMMC.
4. Reboot to recovery
5. Install favorite Rom or restore from backup.
6. Reboot to test.
Again this is what finally worked for me, and I went through a lot of trial and error to get there. I am guessing at your situation being exactly the same as mine.
PS. Ignore my since of humor if you need to.
I'm running an S4 and have this very weird issue where after installing a custom rom, the phone would reboot and load the rom successfully, but if I ever reboot it, it never wants to go past the Samsung logo.
If I try entering TWRP and fixing permissions or factory reset, it just comes up with errors and fails. The only way around it is to format data, then reflash the rom.
But now I have a nandroid backup so everytime I reboot, I basically have to reflash the rom.. It's happened on at least 2 roms!
I've used the search function on the forums and found a thread was inconclusive so I've made this thread.
Thanks in advance
(This is my first Android phone too, so I'm not 100% familiar with all the different software and techniques, but I can definitely learn!)
Try flashing the ROM with the latest stock CWM. TWRP can cause issues.
Kesh09 said:
I'm running an S4 and have this very weird issue where after installing a custom rom, the phone would reboot and load the rom successfully, but if I ever reboot it, it never wants to go past the Samsung logo.
If I try entering TWRP and fixing permissions or factory reset, it just comes up with errors and fails. The only way around it is to format data, then reflash the rom.
But now I have a nandroid backup so everytime I reboot, I basically have to reflash the rom.. It's happened on at least 2 roms!
I've used the search function on the forums and found a thread was inconclusive so I've made this thread.
Thanks in advance
(This is my first Android phone too, so I'm not 100% familiar with all the different software and techniques, but I can definitely learn!)
Click to expand...
Click to collapse
go into the wipe options on twrp - go to advanced and select - cache, dalvik, system, data - swipe
then do a normal full wipe
reflash the chosen rom
power off rather than reboot
then power up
something gets fracked with the wipes somewhere and thats how i fixed it.
either that or flash philz recovery through odin and do a "new rom" wipe
Gotcher said:
Try flashing the ROM with the latest stock CWM. TWRP can cause issues.
Click to expand...
Click to collapse
For some reason, whenever I install CWM, it keeps getting stuck at "recovery booting" and once in maybe 30 times it works, haven't got it to work in a while.. Not sure what's happening, but if I flash TWRP again, it boots up fine. Am I doing anything wrong? Using Philz touch..
scottyf79 said:
go into the wipe options on twrp - go to advanced and select - cache, dalvik, system, data - swipe
then do a normal full wipe
reflash the chosen rom
power off rather than reboot
then power up
something gets fracked with the wipes somewhere and thats how i fixed it.
either that or flash philz recovery through odin and do a "new rom" wipe
Click to expand...
Click to collapse
This hasn't worked for me, and yeah, I can't seem to get CWM to like my phone..
Kesh09 said:
For some reason, whenever I install CWM, it keeps getting stuck at "recovery booting" and once in maybe 30 times it works, haven't got it to work in a while.. Not sure what's happening, but if I flash TWRP again, it boots up fine. Am I doing anything wrong? Using Philz touch..
This hasn't worked for me, and yeah, I can't seem to get CWM to like my phone..
Click to expand...
Click to collapse
try flashing the rom twice in succession. it will stick eventually but its just getting the right combo. these S4's are a right pain in the ass just now.
also another option would be downloading a rom with Aroma installer onto a micro sd and see if that gets you out of the problem. ive found on other devices ive had that a rom with Aroma can sometimes get you moving (id suggest Omega rom as a good solid base)
scottyf79 said:
try flashing the rom twice in succession. it will stick eventually but its just getting the right combo. these S4's are a right pain in the ass just now.
also another option would be downloading a rom with Aroma installer onto a micro sd and see if that gets you out of the problem. ive found on other devices ive had that a rom with Aroma can sometimes get you moving (id suggest Omega rom as a good solid base)
Click to expand...
Click to collapse
The rom I'm flashing (twice) now is Omega actually!
I'll see how this goes! Hoping it's okay!
..
try to install another rom clean & stable and do full wipe or trust me the best to turn the phone to default firmware.
Kesh09 said:
The rom I'm flashing (twice) now is Omega actually!
So are you suggesting I install Omega, get it run, then install Aroma installer and reinstall it?
Click to expand...
Click to collapse
no i just meant flash the rom twice IF it didnt have Aroma.
try GoldenEye rom from micro sd (obviously downloaded and placed on the card through a pc and put back in the phone).
Or as above - you might have to start from scratch and use Odin to revert back to stock and re-root etc again.
Although i said Aroma sometimes helps, being honest it was a rom with Aroma that started causing me a similar issue in the first place (Not Omega or Foxhound though)
No luck guys... I think I'd rather start from a stock rom too. When I created my stock rom backup, it was through nandroid and an CWM format, but CWM did work, it froze when it was checking for MD5 or something...
But now I'm trying to find the right firmware for my phone, is there any thing I need to look out for? Gt-i9505 from Australia?
http://forum.xda-developers.com/showthread.php?t=2265477
In that thread, there's two of them, I'm downloading the one closest to when I bought it which was June
Hello,
Like the title says, I have a Samsung J5, I rooted it as soon as I got it maybe a year or so ago.
I never had any issues with it. This morning, however I made a (now in hindsight) bad decision by factory resetting, dont even ask me why I thought I needed to factory reset it, I already did it.
Anyways, I did the factory reset from the phone and it instantly rebooted into TWRP, and here's where I got lost. I don't know what to do from here.
I assumed the phone would just reset itself, but it always reboots in recovery mode.
I thought maybe I had to flash a ROM again (I flashed a custom one and then stock back when I first rooted it, but my memory is terrible and I just have faint memories of it), I looked that up and found I needed Odin, the stock rom I wanted to flash and to reboot into download mode. So I got all I required and I don't think Odin is finding my phone.
My phone just has the blue screen saying downloading... and do not turn off target. Nothing else. and Odin doesn't show anything (I think it's supposed to show the device somewhere? Anyways, I'm super lost and I have no idea what to do.
I mostly just need someone to point me in the right direction, maybe some instructions I can follow or something, I'm not super experienced as you can tell but I can follow basic instructions when I'm not being dumb.
TL;DR: Did factory reset on rooted J5, now it only boots into TWRP, no idea where to go from here, stock rom flash?
4tson said:
Hello,
Like the title says, I have a Samsung J5, I rooted it as soon as I got it maybe a year or so ago.
I never had any issues with it. This morning, however I made a (now in hindsight) bad decision by factory resetting, dont even ask me why I thought I needed to factory reset it, I already did it.
Anyways, I did the factory reset from the phone and it instantly rebooted into TWRP, and here's where I got lost. I don't know what to do from here.
I assumed the phone would just reset itself, but it always reboots in recovery mode.
I thought maybe I had to flash a ROM again (I flashed a custom one and then stock back when I first rooted it, but my memory is terrible and I just have faint memories of it), I looked that up and found I needed Odin, the stock rom I wanted to flash and to reboot into download mode. So I got all I required and I don't think Odin is finding my phone.
My phone just has the blue screen saying downloading... and do not turn off target. Nothing else. and Odin doesn't show anything (I think it's supposed to show the device somewhere? Anyways, I'm super lost and I have no idea what to do.
I mostly just need someone to point me in the right direction, maybe some instructions I can follow or something, I'm not super experienced as you can tell but I can follow basic instructions when I'm not being dumb.
TL;DR: Did factory reset on rooted J5, now it only boots into TWRP, no idea where to go from here, stock rom flash?
Click to expand...
Click to collapse
Try factory reset in TWRP under "wipe" and try rebooting then.
If that doesn't work download a rom from xda for your device onto an sd card. Then put the sd card into the phone, Reboot into twrp and flash the ROM.
The reason odin isn't picking up your device is more than likely USB debugging isn't enabled which you can only do from inside the phones settings. Enable it once you flash the new rom and then flash your old firmware using odin afterwards if you wish.
Do you know what model it is?
Or even what year model it is? 2015?/16?/17?
If you can boot into twrp you have nothing to worry about as it can be easily resolved
garylawwd said:
Try factory reset in TWRP under "wipe" and try rebooting then.
If that doesn't work download a rom from xda for your device onto an sd card. Then put the sd card into the phone, Reboot into twrp and flash the ROM.
The reason odin isn't picking up your device is more than likely USB debugging isn't enabled which you can only do from inside the phones settings. Enable it once you flash the new rom and then flash your old firmware using odin afterwards if you wish.
Do you know what model it is?
Or even what year model it is? 2015?/16?/17?
If you can boot into twrp you have nothing to worry about as it can be easily resolved
Click to expand...
Click to collapse
Hey
I have already tried doing the factory reset from TWRP, but when I reboot after that it goes back into recovery mode, if I try to reboot from recovery mode into system it just goes back to recovery mode as well.
I'll try downloading another rom, I got the stock one in there but it doesn't flash it from TWRP, which I'm pretty sure is expected behaviour anyways.
The model is SM-J510MN 2016, I'll start looking for a rom.
Thanks
4tson said:
Hey
I have already tried doing the factory reset from TWRP, but when I reboot after that it goes back into recovery mode, if I try to reboot from recovery mode into system it just goes back to recovery mode as well.
I'll try downloading another rom, I got the stock one in there but it doesn't flash it from TWRP, which I'm pretty sure is expected behaviour anyways.
The model is SM-J510MN 2016, I'll start looking for a rom.
Thanks
Click to expand...
Click to collapse
You can't flash the stock rom in TWRP because it is a .zip.tar file and twrp can only flash .zip files or .img files
garylawwd said:
You can't flash the stock rom in TWRP because it is a .zip.tar file and twrp can only flash .zip files or .img files
Click to expand...
Click to collapse
Yeah, I may or may not have already tried hehe.
You wouldn't happen to have a rom that's not being hosted on Mega would you? I exceeded my limit when I was 95% done downloading one of them.
I think I found one, whoops.
4tson said:
Hello,
Like the title says, I have a Samsung J5, I rooted it as soon as I got it maybe a year or so ago.
I never had any issues with it. This morning, however I made a (now in hindsight) bad decision by factory resetting, dont even ask me why I thought I needed to factory reset it, I already did it.
Anyways, I did the factory reset from the phone and it instantly rebooted into TWRP, and here's where I got lost. I don't know what to do from here.
I assumed the phone would just reset itself, but it always reboots in recovery mode.
I thought maybe I had to flash a ROM again (I flashed a custom one and then stock back when I first rooted it, but my memory is terrible and I just have faint memories of it), I looked that up and found I needed Odin, the stock rom I wanted to flash and to reboot into download mode. So I got all I required and I don't think Odin is finding my phone.
My phone just has the blue screen saying downloading... and do not turn off target. Nothing else. and Odin doesn't show anything (I think it's supposed to show the device somewhere? Anyways, I'm super lost and I have no idea what to do.
I mostly just need someone to point me in the right direction, maybe some instructions I can follow or something, I'm not super experienced as you can tell but I can follow basic instructions when I'm not being dumb.
TL;DR: Did factory reset on rooted J5, now it only boots into TWRP, no idea where to go from here, stock rom flash?
Click to expand...
Click to collapse
maybe install usb drivers and try this: disconnect device, hold power, home and vol up key, connect device and then press volume up to enter download mode
Dyeide said:
maybe install usb drivers and try this: disconnect device, hold power, home and vol up key, connect device and then press volume up to enter download mode
Click to expand...
Click to collapse
Yep, I tried that, although I'm not sure the USB drivers I downloaded were correct, since the official page isn't working at least for me. So I downloaded what the websites claimed were the correct drivers, I went into download mode that way, which has some debug info on the top left stating it's in Odin mode, but Odin still didn't recognize it.
I'm pretty sure usb debug options were turned on before this, but I'm not sure if the factory reset could've messed with that, thought I'm assuming it could be part of it.
I'm currently trying to download some custom roms to follow garylawwd's advice, I'll reply once I've got results.
garylawwd said:
You can't flash the stock rom in TWRP because it is a .zip.tar file and twrp can only flash .zip files or .img files
Click to expand...
Click to collapse
So I downloaded one, wiped everything, installed it via twrp, it apparently installed it correctly, rebooted the system and it went straight into recovery mode again. It's not letting me reboot into anything that isn't download or recovery. Any other ideas? Am I doing something wrong?
4tson said:
So I downloaded one, wiped everything, installed it via twrp, it apparently installed it correctly, rebooted the system and it went straight into recovery mode again. It's not letting me reboot into anything that isn't download or recovery. Any other ideas? Am I doing something wrong?
Click to expand...
Click to collapse
Uhm, so after doing that I flashed the latest twrp version (I had 3.0.2 or something), rebooted after flashing the image, did a wipe from there, rebooted and it now didn't boot into recovery mode but instead I'm now on a white screen with the samsung logo in the middle looping from light grey to black. I'll look into that I guess...
4tson said:
Uhm, so after doing that I flashed the latest twrp version (I had 3.0.2 or something), rebooted after flashing the image, did a wipe from there, rebooted and it now didn't boot into recovery mode but instead I'm now on a white screen with the samsung logo in the middle looping from light grey to black. I'll look into that I guess...
Click to expand...
Click to collapse
After it got stuck on the samsung logo I rebooted into recovery mode, flashed the custom rom once again, rebooted and it's still stuck on the samsung logo. Lost once more.
4tson said:
After it got stuck on the samsung logo I rebooted into recovery mode, flashed the custom rom once again, rebooted and it's still stuck on the samsung logo. Lost once more.
Click to expand...
Click to collapse
Go into twrp and go to wipe. Click advanced wipe and wipe system, internal, data, dalvik cache.
Then flash the ROM again and reboot
garylawwd said:
Go into twrp and go to wipe. Click advanced wipe and wipe system, internal, data, dalvik cache.
Then flash the ROM again and reboot
Click to expand...
Click to collapse
Tried this just now, it rebooted twice and on the second reboot it got stuck on the logo once again.
I think I'm done trying to mess around with it, I'll take it to a repair place :/
Thanks for looking out though, definitely appreciate your tips even if they didn't end up working out. :good:
4tson said:
After it got stuck on the samsung logo I rebooted into recovery mode, flashed the custom rom once again, rebooted and it's still stuck on the samsung logo. Lost once more.
Click to expand...
Click to collapse
https://forum.xda-developers.com/ga...nt/recovery-twrp-3-1-2-blue-dogerino-t3768707 Try flashing this recovery it's a newer version.Just download the .img file and install it through twrp as recovery when prompted.
4tson said:
So I downloaded one, wiped everything, installed it via twrp, it apparently installed it correctly, rebooted the system and it went straight into recovery mode again. It's not letting me reboot into anything that isn't download or recovery. Any other ideas? Am I doing something wrong?
Click to expand...
Click to collapse
Why would you try a ROM which has not been updated for months,get a recent one like Lineage OS just to try if it works,its also small in size.
DontTouchMaPhone said:
Why would you try a ROM which has not been updated for months,get a recent one like Lineage OS just to try if it works,its also small in size.
Click to expand...
Click to collapse
He wants to just enable USB debugging in devoloper options because he wants the stock firmware and his pc isn't recognising his phone because this option isn't enabled.
He has twrp so flashing any rom will do just to get into the phone and enable USB debugging so he can flash the stock firmware through odin
garylawwd said:
He wants to just enable USB debugging in devoloper options because he wants the stock firmware and his pc isn't recognising his phone because this option isn't enabled.
He has twrp so flashing any rom will do just to get into the phone and enable USB debugging so he can flash the stock firmware through odin
Click to expand...
Click to collapse
I understand why he is using a custom rom,I mean why did he try one that has not been updated for ages because maybe its the rom causing bootloop
DontTouchMaPhone said:
I understand why he is using a custom rom,I mean why did he try one that has not been updated for ages because maybe its the rom causing bootloop
Click to expand...
Click to collapse
Hey, so yeah, I was just looking for any rom, didn't really look for anything in particular, just got the first one I found in order to just get into the phone.
I ended up just taking it to a repair place after not having much luck myself, I don't know what exactly they did, but I now have that ROM flashed and I have access to the phone, I'm not sure if I want to try flashing either a different custom rom now, stock, or just sticking to this, since I'm sorta scared it will get messed up again and I'll have to go back to that repair place.
4tson said:
Hey, so yeah, I was just looking for any rom, didn't really look for anything in particular, just got the first one I found in order to just get into the phone.
I ended up just taking it to a repair place after not having much luck myself, I don't know what exactly they did, but I now have that ROM flashed and I have access to the phone, I'm not sure if I want to try flashing either a different custom rom now, stock, or just sticking to this, since I'm sorta scared it will get messed up again and I'll have to go back to that repair place.
Click to expand...
Click to collapse
Are you on stock now?
DontTouchMaPhone said:
Are you on stock now?
Click to expand...
Click to collapse
Nope, I'm on Extreme ux 8.0, which is what I downloaded to try to get into the phone to turn on the usb debugging option, the guy that repaired it must've noticed it was already on my SD card and flashed it without telling me.
Like I said, I kind of want to go back to stock but I'm sort of scared of touching it and having it get stuck again, I've kinda got used to this rom's little issues by now though I suppose.
4tson said:
Nope, I'm on Extreme ux 8.0, which is what I downloaded to try to get into the phone to turn on the usb debugging option, the guy that repaired it must've noticed it was already on my SD card and flashed it without telling me.
Like I said, I kind of want to go back to stock but I'm sort of scared of touching it and having it get stuck again, I've kinda got used to this rom's little issues by now though I suppose.
Click to expand...
Click to collapse
Wait,so you paid for the repair right?And he flashed you a custom rom?Looks pretty scammy to me..Anyways do you have twrp or stock recovery?