Database Users

[Q] aria google apps hellp needed plz

Ok I been reading alot about people having a problem getting gapps on there phone. I tried all I read none work. Here is what I'm working with. Rooted using unrevoked, I downloaded Tom manager and used it to get cyangenomod 6 r2. I had to download with out that Google app. Checked because it wouldn't load with it. I have downloaded the gapps file from some diffrent places. I see the files when I do clockwork recovery boot. When I apply it I can get. All the way to the screen with the android it says touch to begin but when u touch it just lights up and.nothing happens. If I back up and reflash the rom with the Google app checked it will get to thescreen where it has the blue Droid says cyangenmod with the circle spinning around and it will never load. But with no gapps it loads fine. Please help this is use less with no market.

Did you wipe data before installing the ROM?

dough_boy said:
Ok I been reading alot about people having a problem getting gapps on there phone. I tried all I read none work. Here is what I'm working with. Rooted using unrevoked, I downloaded Tom manager and used it to get cyangenomod 6 r2. I had to download with out that Google app. Checked because it wouldn't load with it. I have downloaded the gapps file from some diffrent places. I see the files when I do clockwork recovery boot. When I apply it I can get. All the way to the screen with the android it says touch to begin but when u touch it just lights up and.nothing happens. If I back up and reflash the rom with the Google app checked it will get to thescreen where it has the blue Droid says cyangenmod with the circle spinning around and it will never load. But with no gapps it loads fine. Please help this is use less with no market.
Click to expand...
Click to collapse
I don't understand...it's simple. Download the gapps package to your phone, move it to the root of your sdcard (i.e. /sdcard) then boot into clockwork, install zip from flash card, choose zip, choose the gapps package and voila.
http://android.d3xt3r01.tk/cyanogen/gapps/gapps-mdpi-20101020-signed.zip

The exact steps to follow:
1. Root with unrevoked.
2. Wipe data/factory reset
3. Install CM6.1 RC2
4. Install gapps
5. Reboot device and everything should work nicely.

kaschenberg said:
The exact steps to follow:
1. Root with unrevoked.
2. Wipe data/factory reset
3. Install CM6.1 RC2
4. Install gapps
5. Reboot device and everything should work nicely.
Click to expand...
Click to collapse
It might be worth his while to boot into the ROM after flashing it, then boot back to clockwork and flash the gapps package.

This is what. II see the zip file and u click it and it say installed syccesfully Bujumbura when u reboot it never loads to my home screen.

dough_boy said:
This is what. II see the zip file and u click it and it say installed syccesfully Bujumbura when u reboot it never loads to my home screen.
Click to expand...
Click to collapse
dujumbura? What are the procedures you are following to flash the package? Are you using ROM manager? Do you have your phone plugged into USB while booting into clockwork? gotta be a little more specific my friend.

zervic said:
dujumbura? What are the procedures you are following to flash the package? Are you using ROM manager? Do you have your phone plugged into USB while booting into clockwork? gotta be a little more specific my friend.
Click to expand...
Click to collapse
Sorry that word was a typo lol. I used rom manager to get the rom. I download the gapps to my SD card using the browser on my phone.

I go into clockwork to install the gapps and reload cygeno. Is this correct way?it works fine all but Google apps.

dough_boy said:
Sorry that word was a typo lol. I used rom manager to get the rom. I download the gapps to my SD card using the browser on my phone.
Click to expand...
Click to collapse
Are you using ROM manager to install gapps? If you are, don't. Just use clockwork. I understand it's the long way, and its somewhat of a pain compared to using ROM manager...but i've read about a lot of people having issues with doing things like this via ROM manager...

Ok here is what I just did. I downloaded the above link. I turned my phone off booted into clockwork. Found the above file. Installed it. Rebooted. It loaded. Past the cygeno screen where it then asked me if I wanted to back up with Google I checked no. Then hit continue. It goes to a screen says welcome to libirty. Touch the android to start. A little hand is touching. II do this and nothing happens. I downloaded with my phone browsers.

dough_boy said:
Ok here is what I just did. I downloaded the above link. I turned my phone off booted into clockwork. Found the above file. Installed it. Rebooted. It loaded. Past the cygeno screen where it then asked me if I wanted to back up with Google I checked no. Then hit continue. It goes to a screen says welcome to libirty. Touch the android to start. A little hand is touching. II do this and nothing happens. I downloaded with my phone browsers.
Click to expand...
Click to collapse
Not too sure...if i were you i'd ask the OP from this thread:
http://forum.xda-developers.com/showthread.php?t=856418

After you guys installed Google apps. Did it go to that. Screen after reboot says touch the android to continue? Its putting the gapps on there I think just some reason my phone wont go. Past that screen then i have to reboot and restore

dough_boy said:
After you guys installed Google apps. Did it go to that. Screen after reboot says touch the android to continue? Its putting the gapps on there I think just some reason my phone wont go. Past that screen then i have to reboot and restore
Click to expand...
Click to collapse
mine did that and but I just gave it a few seconds touched where it said too and then everything is perfect now and I have had no problem.
Sent from my Liberty using XDA App

Should I just start fresh and do all his from a PC from the start. What do I do just format my memory card an restore from the very first restore?

Ok I'm posting to let any one know that may have this problem. I fixed this easy. I just downloaded the gapps for my phone straight from my phone browser except I got the tiny one instead. Clockwork, zip file, install the zip,reboot,bam all Google apps there. For some reason the tiny was the right one for my phone.
Sent from my Liberty using XDA App

[BL1.2] Roebeets+Clemsyn's Honeycomb COMBO alpha

REQUIREMENTS:
Please Nvflash to 3588 (VERY IMPORTANT)
Here's a link for instructions of 3588 by roebeet
http://forum.xda-developers.com/showthread.php?t=861950
Releasing an alpha version for xda-members to experience Honeycomb in their GTABS. First and foremost, thanks to Roebeet, MrGUY, DJ_Steve, pershoot and the rest of adam devs who helped us port Honeycomb.
WARNING:
This will update your bootloader to 1.2 version (need to be on 3588 for this combo to work)
Whats working..
1. Wifi, BT
2. Touchscreen
3. buttons
4 Browser, Gmail
5. Market
6 gapps
What is not working..
1. OpenGL
2. Camera (because of OpenGl)
3. No flash yet
Link..
https://rapidshare.com/files/541902742/Roebeet_ClemsynHoneycombo.alpha.zip
******* YOU NEED TO BE ON 3588 STOCK and STOCK RECOVERY (NO CWM) BEFORE FLASHING THIS COMBO******
INSTRUCTIONS #1
1. Nvflash to 3588 STOCK DO NOT USE CWM FOR 3588
2. Do not install CWM (we need the stock recovery)
3. DO NOT INSTALL CWM (we need the stock recovery)
4. PLEASE DO NOT INSTALL CWM
5. Reboot
6. RENAME COMBO FILE NAME TO Update.zip
7. Move Update.zip to /sdcard folder
8. Unzip recover.zip and move recovery folder to /sdcard folder
8. Turn off
10. Press Power+Volume up then this will install Update.zip
The reason we don't install CWM for 3588 is because this won't install the bootloader
Instruction #2
1. Rename Combo file to Update.zip and place in /sdcard folder
2. Unzip recovery.zip and put recovery folder in /sdcard
3. Update to NVFLASH to 1.2-4349 using this image
http://www.mediafire.com/?g7vorg66iiq29vm
4. Enter recovery by pressing Power Button+Volume up
IF YOU WOULD LIKE TO GO BACK TO FROYO AND STAY IN 1.2 bootloader here is a link for my Combo version 6
https://rapidshare.com/files/1095733302/Clemsyn_Caulkinver6.zip
BTW, if you like our work, buy us a beer

I am currently running gojimi vegan ginger rc1. What will I have to do if I want to go back,and how are storage partitions mapped on this Rom ?

cool! can't wait to try this. waiting patiently for rom to be uploaded and installation instructions to be posted...

Can't wait to finally try this when I get a few days off!
Question: After trying this and having the bootloader upgraded, will I be able to easily revert back to Clemsyn -Calkulin 1.5 with the new bootloader or will I have to nvflash?

I had to use nflash to go between the two bootloaders. My apps are usually remaining or you can use Titanium to get them back.

Awesome build running smooth already glad someone posted this here
Sent from my GTablet-HC using XDA Premium App

Thanks for posting it here Clemsyn. I really didn't want to sign up for another forum so I can ask question haha.
Anyways, when you say gmail is working, is it fully functional? I thought there were shader (or something like that) issues that prevented us to see the body of the email.
Also, is flash in the browser working?
Those are my two must haves if I am going to switch to HC.
Thanks in advance.

xmr405o said:
Thanks for posting it here Clemsyn. I really didn't want to sign up for another forum so I can ask question haha.
Anyways, when you say gmail is working, is it fully functional? I thought there were shader (or something like that) issues that prevented us to see the body of the email.
Also, is flash in the browser working?
Those are my two must haves if I am going to switch to HC.
Thanks in advance.
Click to expand...
Click to collapse
No flash yet. There is a hacked gmail.apk that works fine. I am using it now, and only flash is not working of everything I personally use. The devs are very close now.

I apologize for the delay, it wasn't done uploading yet and I needed to go to my kid's science project (he won 5th place). Just got home so I posted the link on first page. BTW, gmail is also fixed.

SirhanSirhan said:
No flash yet. There is a hacked gmail.apk that works fine. I am using it now, and only flash is not working of everything I personally use. The devs are very close now.
Click to expand...
Click to collapse
actually flash is technically working just fine...it's the opengl shader issues causing it not to display properly...opengl is also causing the gmail app issues (alt app in place as a temp fix, now) and opengl issues are causing a few other apps to have issues as well...once opengl is resolved then this will be a practically perfect build, imo been running it for about a week now with all the updating and love it!!

clemsyn said:
Releasing an alpha version for xda-members to experience Honeycomb in their GTABS.
Click to expand...
Click to collapse
Thanks clemsyn for sharing this, so whats the difference between this and Roebeets versions released on slatedriod ?

hey, clemsyn...when you get back online, I have a question for you. A lot of the current talk in the Adam dev chat is that a .36 or newer kernel will resolve many of the current issues (OpenGL specifically)...I was wondering if maybe you had a newer version kernel in the works or not for the gtab? If so, how's it coming along? If not, how tough do you think it would be to develop a .36 version of the kernel? Thanks for everything, man. Have a good one.

Is Dolphin HD working on this?
Thanks to clemsyn & roebeet for porting this from the Adam.

Stuck on boot
Hey Roebeet, its been awhile but I'm back and ready for HoneyComb. I folowed your directions. I used NvFlash to get back to 3588. I then installed CWM .08 and partitioned internal 2048 and 0. I put the zip on internal and installed via CWM. Now it hangs on the viewsonic white screen? Any Ideas?

Theres already a 2.3.32.40 overclocked kernal out. Is that not what you are wanting?

jlytle1234 said:
Theres already a 2.3.32.40 overclocked kernal out. Is that not what you are wanting?
Click to expand...
Click to collapse
it's 2.6.32.40...the 40 is the version number of the .32 kernel...they are looking for a x.x.36.x kernel to possibly resolve the issues with opengl...

acuralegendz said:
Hey Roebeet, its been awhile but I'm back and ready for HoneyComb. I folowed your directions. I used NvFlash to get back to 3588. I then installed CWM .08 and partitioned internal 2048 and 0. I put the zip on internal and installed via CWM. Now it hangs on the viewsonic white screen? Any Ideas?
Click to expand...
Click to collapse
Most of us got this issue. When reading on the other website it says to do wipe data after flashing so do that and see
Sent from my SGH-T959 using XDA App

Djapatos said:
Most of us got this issue. When reading on the other website it says to do wipe data after flashing so do that and see
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I think this guys issue stems from the fact that he installed cwm. This rom needs to be installed with the stock bootloader.

Well I have the same issue, I wiped, but nothing. When I flashed the file, it said unknown command bootloader, bla bla.
Pretty sure thats the issue, I was running 3588 ...dont know whats up.

I get the same results with the unknown command bootloader. I've tried wiping all data after the installing the rom and the gtab still gets hung up. This is coming from using nvflash to 3588 and a repartition.

[HOLY CRAP][SPRINT P100] Stock to CM10 JellyBean - Complete Walkthrough

*********************************************
CM10 is now available.
Requirements: Root
From rooted stock or a custom rom, just download and install updated Rom Manager from the Play Store and download CM10 Nightly and GAPPS. Reboot into ClockWorkMod, factory wipe, disable signature check, flash CM10 twice. The first time partitions our tabs and reboots. Flashing a second time is for good measure. Then flash GAPPS. Done.
Note: I am not sure if Rom Manager can flash ClockworkMod directly. I personally updated from ICS > CM10 by downloading CM10 and GAPPS through GooManager and flashing manually in ClockWorkMod.
Its been reported that you can go directly from rooted stock to CM10. I've actually completed everything below to get to ICS first (Stock > ICS > CM10 JB).
CM10 is a much better experience. The tab works much better, doesn't freak out, lasts longer, plays better.
*********************************************
Wow. Lots of different, confusing, and scattered information about how to go from stock Gingerbread to the latest CM9 build. It is all very confusing and honestly most of the useful information isn't even on this site. So I figured I would help myself (and others) in creating a very detailed walkthrough of the process required to successfully get from GB to CM9 Build 7.
**This specifically outlines the methods to take a COMPLETELY STOCK Sprint Galaxy Tab 7" SPH-P100, unrooted, to a ICE CREAM SANDWICH rom. I "think" it might also work for the Verizon CDMA and a few others. I think the ROM itself is a general overall generic build for all 7" Gtabs. So heads up that if you have a different version, you might want to use this as a guide rather then a step-by-step.**
BACKUP EVERYTHING YOU MAY NEED BECAUSE OBVIOUSLY THIS PROCESS WILL FORMAT YOUR GALAXY TAB
GET CONNECTED!
We need to download Heimdall's App and his Drivers (Main URL). This is the first confusing steps as everyone suggests using an older version, but the included drivers don't work on newer Windows OS's. So you have to mix and match a few different versions to get it working. I've already compiled an archive with everything you need: Heimhall Mixture /w zImage & ClockWorkMod 5.0.2.7
1. Extract everything to a simple folder [ex. C:\GTABICS ]
2. Turn off Gtab. Hold VolDown+Power until you get to a downloading screen
3. C:\GTABICS\Drivers\zadiag.exe to load drivers [try running as Administrator]
4. C:\GTABICS\heimdall-frontend.exe to start the process
5. Kind of confusing. Focus on the "BROWSE" buttons. Look for "Kernel(zImage)" on the left and "Recovery" on the right. Hit browse for each one and select the appropriate file from C:\GTABICS. Obviously "Kernel(zImage)" = "zImage" and "Recovery" = "recovery.bin".
6. Make sure Kernel(zImage) and Recovery both have files selected and a checked box. While GTAB is at the black Downloading screen: Hit "START".
7. The process is pretty fast. Don't rush. At this point your tab will probably just bootloop anyway.
LET'S GET THIS SHOW ON THE ROAD
Now you have ClockWorkMod installed and a proper kernel, most flashers will feel really at ease right now. But there are a few little quirks that will cause this to go bad. You have to install 2 versions of ICS to get to the latest; One using the existing partition table, and a second that will update to a newer format. You obviously have to install GAPPS like always with a CM rom, but not so fast, you have to manually "MOUNT /SYSTEM" in CWM before it will even take. And there is the fact that you have to manually open and edit the CM9 Build7 update and remove code....[holy crap].
But it is pretty easy once you go through it once.
REQUIRED FILES
JT1136 CM9 V5
JT1136 CM9 V7 UPDATE
GAPPS
Prepare CM9 v7 Update
1. On your PC, open "update-cm-9.0.0-RC0-galaxytab7c-KANG-BUILD7.zip" and browse to META-INF\com\google\android
2. Copy "updater-script" to your desktop and open with Notepad and remove the first 3 lines or just Download it.
3. Drag and drop the update-script back into the META-INF\com\google\android folder, overwriting the existing one.
If all goes well, you are now done with the PC.
COPY FILES AND FLASH
1. Copy Build5, the new Build7, and GAPPS to your microSD card.
2. Boot into ClockWorkMod: Power off. Hold VOLUP + POWER
3. Factory Reset / clear cache / wipe Dalvik Cache / Breathe
4. Flash zip from SDCard: locate Build5 and Flash
5. Factory Reset / clear cache / wipe Dalvik Cache / Breathe
5.5 [OPTIONAL] You should be able to boot into ICS at this point if you want to make sure build5 flashed properly before upgrading to build7
6. Flash zip from SDCard: locate Build7 and Flash
At this step, my GTab rebooted in the middle of the process the first time. It freaked me out but I assume (now) that since it changed the partition tables, it needed to reset. So I did it a second time just to be safe:
7. Flash zip from SDCard: locate Build7 and Flash
8. Factory Reset / clear cache / wipe Dalvik Cache / Breathe
Congrats. You should have a working bootable CM9 build. But lets flash GAPPS so we have our Google services. This is tricky.
9. Mounts and Storage > Mount /System
10. Flash zip from SDCard: locate GAPPS and Flash.
11. Finally [!] reset device and prepare for boot.
Now you are on the latest CM9 build [7] and have the latest GAPPS installed. Hopefully you are booting now and see the famous ICS Boot Animation. Have fun. In the future you should be able to simply download new roms as they are available and flash normally like you would any other device.
RECAP:
Drivers and Flash Tool
Pre-Edited updater-script
UPDATES
Convert to Sprint
The above procedure will set your Tab as a Verizon version. If you plan on using the Sprint cellular service or just want everything to match, then flash this via ClockWorkMod.
****************************************​
I didn't do any development work. All credit goes to Heimdall for his fantastic Recovery Flasher and jt1136 for his great stills porting this awesome rom over to our Galaxy Tabs. All I did was bump and grind my way through to see a successful working flash. I figured if I didn't post a walkthrough here, I would hate myself in 6 months when I boink something up and have to do this all over again. I would recommend you keeping all of the files safe somewhere to prevent this headache again.
DONATE TO JT1134
DONATE TO HEIMDALL
MAIN HEIMDALL URL
MAIN ROM URL

player911
i have been thinking about moving up to ICS with my sprint sph-p100
just not sure if i should jump now or wait till more things are working ?
do the things working out number those not , is it ready to be a daily driver yet?

Camera fully works but is flaky sometimes. Video out isn't working yet but he's working on it.
Other then that, its golden. Very fast and works well. Really worth it. Feels much better... like an actual tablet vs a large phone.
Iffy Camera and video out aren't worth holding back. One of the benefits is now Wiimotes and PS3 controllers will pair up using their respective apps now.
Sent from my Galaxy Nexus using xda premium

Thanks for the input ill be movin up to ICS soon
Sent from my SPH-P100 using Tapatalk

flashed sprint Tab
Hello all,
Thanks for the files and instructions! Here is my situation/question:
I bought my Gtab off of ebay flashed to work on Boostmobile's 3G network. It works great, and had no problem with the official OTA upgrade to Gingerbread.
Now I'm dying to upgrade to ICS but am worried that this would mess with my 3G connection. I can't provide any details of what went into the flashing (its not a process I understand), but I'm hoping that someone out there will.
So, if I follow the instructions in this thread will I still be able to use my Tab with the boost 3G it connects to now?
Many, many thanks for any help with this!!

Great Thanks! The first complete step-to-step instruction for installing ICS on Sprint p100.
One note- if you have Error 12 - delete all SAMSUNG USB drivers on PC, rebut and instal drivers from first archive.
At least!!! Thanks a lot!

I don't use the cellular network (sprint) but it does come up and show signal. I don't use it as a phone or anything like some people (supposedly you can install phone.apk and make calls over a voice plan).
I just use the tab as a tab. I just wanted to confirm that it appears to see the cellular network fine.
Sent from my Galaxy Nexus using xda premium

just made the plunge had some issues with the drivers for heimdall and after that i got a fail when flashing hit start again and it flashed
followed all the steps and im on cloud 9 now wow
gonna take a few to get used to ICS

Well I found a sprint patch and flashed it all is well now
Sent from my SPH-P100 using Tapatalk 2

LivnDream said:
Well I found a sprint patch and flashed it all is well now
Sent from my SPH-P100 using Tapatalk 2
Click to expand...
Click to collapse
Sprint patch for what? Mind linking? No offense but posts like these without links or more information is what creates confusion.
I haven't used a patch at all and everything seems to be working. I also never heard of a patch to fix anything.
Sent from my Galaxy Nexus using xda premium

scabrerautexas said:
Hello all,
Thanks for the files and instructions! Here is my situation/question:
I bought my Gtab off of ebay flashed to work on Boostmobile's 3G network. It works great, and had no problem with the official OTA upgrade to Gingerbread.
Now I'm dying to upgrade to ICS but am worried that this would mess with my 3G connection. I can't provide any details of what went into the flashing (its not a process I understand), but I'm hoping that someone out there will.
So, if I follow the instructions in this thread will I still be able to use my Tab with the boost 3G it connects to now?
Many, many thanks for any help with this!!
Click to expand...
Click to collapse
you have nothing to worry about, 3g will still work.. i have flashed many roms on mine including ics ones and 3g still worked.
well i shouldn't say many roms...i've flashed it many times to ics and back to gb.

player911 said:
Sprint patch for what? Mind linking? No offense but posts like these without links or more information is what creates confusion.
I haven't used a patch at all and everything seems to be working. I also never heard of a patch to fix anything.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
its a sprint patch on the rootzwiki fourm for this rom ill get you a link
i got a post there with a link to the patch someone there posted
it changes the wireless from showing veirson to sprint and the tab to sph-p100
wasnt tryin to cause any confusion
http://rootzwiki.com/topic/11697-rom-cdma-aosp-ics-cm9-build7-0304/page__st__1040#entry613901

Do I need to be on stock gb or could I do this while rooted? Sorry I'm noob with hiemdall.
Sent from my SPH-P100 using xda premium

As soon as I flash version 5 I get an error that installation was aborted, what did I do wrong?

dog44 said:
As soon as I flash version 5 I get an error that installation was aborted, what did I do wrong?
Click to expand...
Click to collapse
Try re-downloading the version 5 zip again. Make sure you don't edit anything within the zip before you put it on your SD card. This happened to me when I edited the version 7 zip as instructed above.

Ok. Got it working. What is the newest ver.? I'm on 4.03
Sent from my SPH-D700 using XDA

I think 4.0.3 is the latest ported over. I have a Galaxy Nexus and 4.0.4 was just released... so I would expect delays in porting that over to unofficial devices.
The patch, I've found, is just cosmetic. Once you upgrade to ICS using this method, the build.prop has everything setup as a Verizon Device (name, settings, etc). They can all be manually changed but there is a patch that you can flash via ClockWorkMod that does everything for you.
The link was posted a few posts up.

What is DTI? I may just leave it as verizon since I get more signal. LOL

Hey what's up guys I just threw this on my sprint tab... I had a few quirks with it early... when I first flashed the clockwork mod on it, the screen was discombobulated... the capacitive touch orientation was in landscape mode while the actual screen was in portrait.
So when I had to put the files back on the tab after modifying build 7 zip. I had to figure how to unlock the screen and then and also to choose "connect USB to storage"
Then I got a little nervous while doing the wipe because it took long. I thought it froze..
Just a heads up of what could happen to other guys .
Also now after full install, I find that my ram is usually pretty low and my CPU usage is almost always @ 100 percent .
Taking away from the fluidity... any suggestions ?
I restored my email from titanium back up and also my browser bookmarks, now they don't open up or close immediately. This happens with a lot with system data restored things....
Sent from my SPH-P100 using Tapatalk

Whenever my tab starts it says encryption unsucessful, how can I get past this screen?

Need help changing ROM Criskelo 5 to liquid smooth 3.2

Hi Guys,
I am trying to change my ROM from Criskelo 5.1 (has speedmod kernel but dont think that should make a difference) to LiquidSmooth 3.2. Usually this is a pretty straight froward process but for some reason I just cant get past CWM. Here is what I've done so far.
Reboot into recovery.
Flash AbyssNote 3.2 (redtouch) and reboot into AybssNote.
Wipe everyting (inlcuding dalvik and battery)
Flash LiquidSmooth 3.2
On doing this the phone restarts - as is expected - but then it just reboots in CWM. I've tried various permutations of this (even tried wipes from CWM before going into Abyss) in the hope that it might work but nothing seems to work. Before this I tried to go Criskelo 5 to 8 and got stuck on boot screen.
Thanks God for nandroid or this would have become an extremely frustrating experience. Any ideas ?
EDIT: Used AbyssNote 4.2 and not 3.2 .... sorry about that

tariqsaleem said:
Hi Guys,
I am trying to change my ROM from Criskelo 5.1 (has speedmod kernel but dont think that should make a difference) to LiquidSmooth 3.2. Usually this is a pretty straight froward process but for some reason I just cant get past CWM. Here is what I've done so far.
Reboot into recovery.
Flash AbyssNote 3.2 (redtouch) and reboot into AybssNote.
Wipe everyting (inlcuding dalvik and battery)
Flash LiquidSmooth 3.2
On doing this the phone restarts - as is expected - but then it just reboots in CWM. I've tried various permutations of this (even tried wipes from CWM before going into Abyss) in the hope that it might work but nothing seems to work. Before this I tried to go Criskelo 5 to 8 and got stuck on boot screen.
Thanks God for nandroid or this would have become an extremely frustrating experience. Any ideas ?
Click to expand...
Click to collapse
Bump .... anyone ?

Get a stock gb rom and flash via pc odin.
Sent from my GT-N7000 using xda app-developers app

tariqsaleem said:
Bump .... anyone ?
Click to expand...
Click to collapse
Have you try other ROM besides LiquidSmooth? Since it stuck in CWM, I suspect the installation script for LiquidSmooth is not compatible with Abyss 3.2 CWM.

praetorius said:
Get a stock gb rom and flash via pc odin.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
I was hoping you wouldn't say that .... I have a really slow net connection at the moment and don't have any GB stock roms saved (next time I'll think twice before I delete stuff ). Is there any other way I can do this or is this the only option I have ?

lenrek said:
Have you try other ROM besides LiquidSmooth? Since it stuck in CWM, I suspect the installation script for LiquidSmooth is not compatible with Abyss 3.2 CWM.
Click to expand...
Click to collapse
I tried to update to Criskelo v8 and in that case I got stuck on the boot screen. Had to do a hard reset and get back into recovery manually.
Sorry about the confusion, I actually used Abyss 4.2 (which I got from the Liquid Smooth thread) so I don't think there should be any compatibility issues.

Go back to abyss42 and factory reset from within abyss42 (red menu). Also do cache and dalvik wipe.
Reinstall your custom rom.
And since you have a slow connection, there is a chance your files are corrupt.
Sent from my GT-N7000 using xda app-developers app

Do a unzip -t <zipfile> to verify the file is not corrupted. As above post stated, it maybe a corrupted zip file.

praetorius said:
Go back to abyss42 and factory reset from within abyss42 (red menu). Also do cache and dalvik wipe.
Reinstall your custom rom.
And since you have a slow connection, there is a chance your files are corrupt.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Did all of that i.e Factory reset from within Abyss42, clear cache and dalvik wipe.
I guess I'll try downloading again but why I doubt that would fix anything since this is the 2nd ROM I've had the same issue with. Well not exactly same, in the case of Criskelo 8 it gets stuck on boot screen where as with liquid smooth 3.2 it keeps going back into CWM . Still worth a try though. will update tonight once I get to download again.
Anyway of verifying whether my files are corrupt or not ?

lenrek said:
Do a unzip -t <zipfile> to verify the file is not corrupted. As above post stated, it maybe a corrupted zip file.
Click to expand...
Click to collapse
Thanks...I'll give that a go later today. Currently the rom in on my phone. Can I do something similar via the terminal on my mobile ?

tariqsaleem said:
Thanks...I'll give that a go later today. Currently the rom in on my phone. Can I do something similar via the terminal on my mobile ?
Click to expand...
Click to collapse
Is a zip file, so just get one of those app that can open zip/compressed file from the Google Play. I use AndroZip, FYI. I believe there are more choices in Google Play.

lenrek said:
Is a zip file, so just get one of those app that can open zip/compressed file from the Google Play. I use AndroZip, FYI. I believe there are more choices in Google Play.
Click to expand...
Click to collapse
Tried to open it with ES Zip Viewer and it opens up without any issues, so does that mean that the file is not corrupted ?

tariqsaleem said:
Anyway of verifying whether my files are corrupt or not ?
Click to expand...
Click to collapse
check for MD5 checksum

try abyss 3.9
my phone stuck on bootanimation endlessly with Liquid black 3.2, i was using abysss 4.2 with red interface, i moved on to asylum

rraaka said:
try abyss 3.9
my phone stuck on bootanimation endlessly with Liquid black 3.2, i was using abysss 4.2 with red interface, i moved on to asylum
Click to expand...
Click to collapse
Tried flashing with abyss 3.9 but still have the same issue. The phone reboots into CWM

For the benefit of others....went back to stock Samsung GB image and flashed paranoid android from there and it worked
Sent from my GT-N7000 using xda app-developers app

[VIDEO] Idiot's Guide - How to Install CM10 on the HP Touchpad

This is my FINAL VERSION of my Idiots Guide for the HP Touchpad. Now that a stable enough version of CM10 is available, I finally created a guide for you.
Here are links to the files you will need:
CM10 03/04/2012 Build
GAPPS 10/11/2012
ACMEInstaller3
Moboot 3.8
Anything else that you might need, you'll find on http://www.reverendkyle.com

Thanks for the video. It came just in time as I just purchased a used TP that had an older version of android ICS already on it and I wanted to upgrade but seeing as how this is the first device I have sort of inherited already rooted, it is hard to just jump in and know everything that I would have learned from the beginning like i did with my previous phones.
Anyways, I did everything you said except I used the newest AOKP rom. But my tp is still booting to the older version of android that I had on it. Any ideas? Feel free to pm me if you prefer that.

aujbman said:
Thanks for the video. It came just in time as I just purchased a used TP that had an older version of android ICS already on it and I wanted to upgrade but seeing as how this is the first device I have sort of inherited already rooted, it is hard to just jump in and know everything that I would have learned from the beginning like i did with my previous phones.
Anyways, I did everything you said except I used the newest AOKP rom. But my tp is still booting to the older version of android that I had on it. Any ideas? Feel free to pm me if you prefer that.
Click to expand...
Click to collapse
If the AOKP ROM is using a unique uImage file, then you may see two different entries on your moboot screen for two different Android builds.
What does your moboot menu have in it?

Maybe your install failed. Try downloading and flashing it again. If you're trying AOKP JB, you should wipe both /data and dalvik cache to avoid a boot loop!
If using AcmeInstaller3 remember to rename the ROM with ”update-” at the beginning so that it looks like update-AOKPJB_UnOfficial.zip
Sent from my SAMSUNG-SGH-T989 using xda premium

-SGA- said:
Maybe your install failed. Try downloading and flashing it again. If you're trying AOKP JB, you should wipe both /data and dalvik cache to avoid a boot loop!
If using AcmeInstaller3 remember to rename the ROM with ”update-” at the beginning so that it looks like update-AOKPJB_UnOfficial.zip
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
I believe it was the "update-" thing that was keeping it from updating. I followed another video tutorial which provided files that had the "update" in front of them and it worked.
I haven't tried yet but now that it worked will the regular method of wiping and flashing through recovery work? (Like, if I want to try out different JB Roms) Are there any files that need to be in a particular place for the recovery method to work? I tried that method first and it would never take, would always revert back to the original version. Don't know if, because I just jumped in and haven't been here from the beginning, I am just missing a necessary step that is hardly even talked about anymore.

Love your work Rev! Thank you again for everything that you do!
Update went like clockwork, unfortunately I can't seem to get the camera to work (not a terrible loss, but I was sorta excited to see it actually working with this release).

Jubmasterflex said:
Love your work Rev! Thank you again for everything that you do!
Update went like clockwork, unfortunately I can't seem to get the camera to work (not a terrible loss, but I was sorta excited to see it actually working with this release).
Click to expand...
Click to collapse
I can attest to the improved battery life on this cm10 build. Amazingly, it holds battery life when it's sleeping now.

Thank you so much for taking the time in making the video for us. Your instructions are easy to follow, hard for anyone to mess up.
(The hosting site for the files is not working, not sure if you were aware)

Hi, I have CM9 running on my TP. With the latest release, the camera works great. But before updating it to CM10, I'd like to know about the issues currently in this build.
Thanks.

Where does one go when the goo.im site appears down, to get the needed files? Mirror somewhere?

ljderm said:
Where does one go when the goo.im site appears down, to get the needed files? Mirror somewhere?
Click to expand...
Click to collapse
Don't go for external mirrors unless some recognized developer suggests them. Best will be to wait for goo.im to come up again, being a prime site, it won't be down for long.

The goo servers do appear to go down on occasion. They always come back up a bit later.

Problem with installing GAPPS using ACMEInstaller3
Excellent tutorial for an idiot like me. Thanks for again for the guide! Question:
I followed the instructions step by step and was able to get CM10 installed successfully. However, I wasn't able to get GAPPS installed using this method. From researching I understand sometimes there is a problem installing GAPPS through ACMEInstaller3 and one can simply get GAPPS installed through CWM Recovery. However, I would like to use/have TWRP instead so is there a way to get GAPPS installed properly through ACMEInstaller3 and then I can install TWRP through GooManager?
Alternatively, is there a way to install GAPPS without using CWM Recovery?
Or, I guess I can install CWM Recovery first, then install TWRP Recovery, then remove CWM Recovery while keeping TWRP and not go back to the stock Recovery? I tried to search the forums and wasn't able to find instructions on removing CWM Recovery WHILE still keeping CM10 and not go back to the Stock recovery.
Any help would be much appreciated. Thanks in advance for your help.

@reverendkjr - appreciate your videos. they're awesome. definitely helped me (and several other friends) many times and saved a ton of time. super easy to follow.

Yes you can install TWRP normally, flash gapps in CWM then install goomanager app, open and click the 3 dot menu and install custom recovery script then it will install it
Now using a root file manager go to the directory called boot and delete uimage.cwm.img (this is from memory but still should be correct
Sent from my cm_tenderloin using XDA Premium HD app

waynekirby said:
Yes you can install TWRP normally, flash gapps in CWM then install goomanager app, open and click the 3 dot menu and install custom recovery script then it will install it
Now using a root file manager go to the directory called boot and delete uimage.cwm.img (this is from memory but still should be correct
Sent from my cm_tenderloin using XDA Premium HD app
Click to expand...
Click to collapse
Dumb question. I had dual boot installed with moboot and one day my dumbarse clicked erase SD card.well it did...EVERYTHING accept twrp. I successfully reinstalled webos and installed preware. Its actually pretty cool.its like a fledgling play store for webos. Now....where should i go from here.i no longer think twrp is on it. All i have is webos with preware.sorry if this is newbie
Sent from my Galaxy Nexus using xda premium

Crwolv said:
Dumb question. I had dual boot installed with moboot and one day my dumbarse clicked erase SD card.well it did...EVERYTHING accept twrp. I successfully reinstalled webos and installed preware. Its actually pretty cool.its like a fledgling play store for webos. Now....where should i go from here.i no longer think twrp is on it. All i have is webos with preware.sorry if this is newbie
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
My goodness you have forgotten everything, you will need to install acmeuninstaller 3, moboot, CMW and the rom you want along with the relevant gapps. Sounds complicated this thread will make it easy
http://forum.xda-developers.com/showthread.php?t=2147284 and has all the necessary links. Have fun.
Sent from my Transformer Prime TF201 using Tapatalk 2

Heck ya i did lol. That refreshed my memory instead of a long video. Thank yo very much

Awesome!
Sent from my cm_tenderloin using xda app-developers app

Great vid!! Finally got CM10 on my Touchpad.