[Q] odin back from cm7 damage the phone - Epic 4G General

when i try odin back to stock from cm7 screen on the phone went light orange and odin stopped working .now phone is dead any ideas, its actually second time ,never ever have problem before

Have you tried removing the battery and going into download mode plugged in?

nothing works cant put the phone in download mode or start

rafal2006 said:
nothing works cant put the phone in download mode or start
Click to expand...
Click to collapse
Even after removing the battery and trying from USB power? Have you tried different cables/ports/computers?

man i try every possible configuration (done flashing a lot never have problems before cm7 i always was able to go back with odin)

It was a bad connection... biggest give away was the color...wait a solid color right? Like everything went blank and it turned orange? If so then its your cable use a different cable....
Also did you have repartition check as well as auto reboot?
Not to be that guy but better me than some jacka** but this posted in the wrong section should be in q&a
Sent from my SPH-D700 using xda premium

ok but i cant put the phone in the download mode any more, so new phone and new cable then?
yes

rafal2006 said:
ok but i cant put the phone in the download mode any more, so new phone and new cable then?
Click to expand...
Click to collapse
Leave the battery out for a while like an hour or so and then try it again....
But it could be the cable keeping it from going into download mode cuz its bad
Sent from my SPH-D700 using xda premium

rafal2006 said:
ok but i cant put the phone in the download mode any more, so new phone and new cable then?
Click to expand...
Click to collapse
Keep trying all the suggestions. Sometimes it just gets picky. Try it without a battery and with a new cable.

i have had this too
I have had this too in green, blue, and red before. I have been always been able to fix it by waiting with sdcard and battery out and trying it later.

rafal2006 said:
ok but i cant put the phone in the download mode any more, so new phone and new cable then?
yes
Click to expand...
Click to collapse
So an update please what happened?
Sent from my SPH-D700 using xda premium

People have had success by popping battery in and out several times and simultaneously trying to get into download mode.
Sent from my SPH-D700 using XDA App

You're attempting to put it in download mode *before* connecting the cable, right?

that helped im in download mode
thanks kennyglass123

As VassagoX suggested in his posts I have had luck a number of times where I cannot get into download mode on a failed odin flash until I try with no battery in the phone and usb into pc.
1) remove battery, leave it out.
2) start odin on pc
3) plug usb into pc, and phone
4) hold 1, hit power (still no battery) to go into download mode.
Glad you were able to get it working. Figured I'd throw this out there again in case it can help anyone else.

Related

help needed destroyed loader:(

hello felow galaxy users
i have a galaxy s and i tried to flash darky 9.1 rom on it
when i whas in bootloader i saw i had 3e recovery so i went on google to search on how to get back to 2e recovery
i found a file made by chainfire wich should arrange it treu odin
now when i connect the phone odin detects it and i can start but it always stays on seting up connection
now when i want to turn on the phone it gives a screen where i see a picture i need to hang the phone on the computer but it doesnt boot to the normal home screen anymore
hope some one can help me to get my phone working again
i can come in download mode but not in 3e recovery anymore
please help me as i need my phone work
let odin run for over 20 min without succes always on setup connection
and im using windows 7
...
go in to download mode and use ODIN??? you know what i mean???
mateusz1990 said:
go in to download mode and use ODIN??? you know what i mean???
Click to expand...
Click to collapse
no not quite sure
im trying to use odin now to flash chainfire his root and 2e recovery tar file
but it always stays on setup connection:S
miniterror said:
no not quite sure
im trying to use odin now to flash chainfire his root and 2e recovery tar file
but it always stays on setup connection:S
Click to expand...
Click to collapse
I used to love your ROMs for my old Touch HD.. good to see you now have a Galaxy S!
Not so sure from your posts above what method you have tried. When are you trying to connect Odin? You need to be in Download Mode first, fire up Odin, then connect your phone...
Is this what you are doing?
Also, which version of Odin you using? In Win7 you may need to right click and run as administrator?
The best way is to look on the odin how to here in forum
miniterror said:
hello felow galaxy users
i have a galaxy s and i tried to flash darky 9.1 rom on it
when i whas in bootloader i saw i had 3e recovery so i went on google to search on how to get back to 2e recovery
i found a file made by chainfire wich should arrange it treu odin
now when i connect the phone odin detects it and i can start but it always stays on seting up connection
now when i want to turn on the phone it gives a screen where i see a picture i need to hang the phone on the computer but it doesnt boot to the normal home screen anymore
hope some one can help me to get my phone working again
i can come in download mode but not in 3e recovery anymore
please help me as i need my phone work
let odin run for over 20 min without succes always on setup connection
and im using windows 7
Click to expand...
Click to collapse
Brother, use Odin3 v1.7 from my signature & see if it detects? A lot of guys have recovered their phones using 1.7. trust me.
pull the battery
wait a few seconds
put the battery back in
hold vol-down + power + home
You should get into download mode
connect the phone physically to the pc
flash a ROM or a kernel or whatever you desire
I wish you good luck^^
Close any kies process running in background and try again
Sent from my GT-I9000 using XDA App
krs360 said:
I used to love your ROMs for my old Touch HD.. good to see you now have a Galaxy S!
Not so sure from your posts above what method you have tried. When are you trying to connect Odin? You need to be in Download Mode first, fire up Odin, then connect your phone...
Is this what you are doing?
Also, which version of Odin you using? In Win7 you may need to right click and run as administrator?
Click to expand...
Click to collapse
glad you liked my rom
i personally dont have a galaxy
its from a friend
i have a desire hd way more easy to flahs then these samsungs(my brother has a galaxy to)
i have tried several odin versions but all without succes
he method i used is turn phone in downloadmode(says it with big letters on the screen) then start odin and connect the usb cable
odin detects it but never had succes(last attempt i let it run for 237 minutes)
the thing i wnated to flahs is succeded now but still not getting 2e recovery
gonna have to lok a little further on how to put darky his rom on it or you guys recoomend a better one
ragin said:
Brother, use Odin3 v1.7 from my signature & see if it detects? A lot of guys have recovered their phones using 1.7. trust me.
Click to expand...
Click to collapse
thanks mate
the first odin that actually succeeded flashing
to bad it still odenst has 2e recovery now or better yet no recovery at all but i can see the galaxy s boot up screen again
theduckking said:
pull the battery
wait a few seconds
put the battery back in
hold vol-down + power + home
You should get into download mode
connect the phone physically to the pc
flash a ROM or a kernel or whatever you desire
I wish you good luck^^
Click to expand...
Click to collapse
thanks mate
corgar said:
Close any kies process running in background and try again
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
thanks for the tip
will do that
edit: muchias gracias everybody its working again
you guys saved me alot of money
and i have recovery 2e wich i wnated to flash clockwork update.zip
at least i think it does work again
i hear a bootup sound and i see a animation
will report later as my work break is over
uhhmmmm is it now bricked?
now it doesnt do a thing anymore
when i press buttons for downloadmode nothing happens
when i only press the power button nothing happens
its completley dead now:S
is there anything i can do to force a start to anything
maybe with a software setup on the sd card?
or a script
most devices have a code wich will hot restart the phone to bootloader
read something about a jig you guys think it will work
gonna buy the stuff to make one tomorow
hope it works
miniterror said:
uhhmmmm is it now bricked?
now it doesnt do a thing anymore
when i press buttons for downloadmode nothing happens
when i only press the power button nothing happens
its completley dead now:S
is there anything i can do to force a start to anything
maybe with a software setup on the sd card?
or a script
most devices have a code wich will hot restart the phone to bootloader
read something about a jig you guys think it will work
gonna buy the stuff to make one tomorow
hope it works
Click to expand...
Click to collapse
The jig most likely wont work if the phone is completely dead, you could try a hairdryer it seems to work sometimes. Otherwise its back to samsung.
uciu said:
The jig most likely wont work if the phone is completely dead, you could try a hairdryer it seems to work sometimes. Otherwise its back to samsung.
Click to expand...
Click to collapse
can you link me to a page with the hairdryertrick?
cant find anything on google about it on how to do it
Maybe you've tried this already but I've had this problem after a bad flash and the phone wouldn't boot up anymore. I just remove the battery and all good again.
Sent from my GT-I9000 using XDA App
hmmm still no progress yet
i made a rig and even with that it doesnt boot or turn on
also when i put in the charger i dont see a light turning on its charging
wish i could have any form of live in it
I had the same problem, had to send it back but did not test it with a jig. Got one shortly after
Sent from my GT-I9000 using XDA App
jaju123 said:
I had the same problem, had to send it back but did not test it with a jig. Got one shortly after
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
thanks for all youre help guys
i didnt have any succes and i gave it back so it can be ruturned to the provider
hope it falls under warranty
did yours fall under warranty or under insurance of youre phone?
If you bricked your phone than pm me i helped many of peoples

Unbricked my phone without recovery mode

I apologize in advance if this has been posted before as I do not frequent this site much.
So I just tried to download 2.2 via kies and ended up bricking my phone. I followed it step by step so I don't know where I went wrong.
So in the process of me trying to unbrick my phone I tried to get into recovery mode with no success.
I got fed up trying to access download mode by vol. up/down and plugging in usb and decided to just go ahead and open Odin with the usb plugged into my phone and laptop still not in download mode.
On Odin it was on ID: COM 10 so i said screw it, I put in the pit and pda and hit start.
What do you know. it worked !
My phone is up and running now and I'm now trying to find an alternative way to get 2.2 on my vibrant.
Just wanted to share.
If you weren't in DL mode then what screen were you on?
The com number is unimportant. There is a deodexed stock version of 2.2 in the dev forum posted you could use that instead of Kies...... I would
I have only been able to access the phone via odin in download mode and the computer-phone mode, whatever its called.
These are the techniques I use to access d/l mode consistently. It depends on which software was installed prior to crash however, as they seem to alter the method somehow.
phone off then vol + and vol -, and plug in usb, the most common one. If that doesn't work, its usually phone off then vol - and power. This seems to be for the older versions of android. Also, keep the back cover off, because if it doesn't work, just pop the battery out and in.
leechdweler said:
I apologize in advance if this has been posted before as I do not frequent this site much.
So I just tried to download 2.2 via kies and ended up bricking my phone. I followed it step by step so I don't know where I went wrong.
So in the process of me trying to unbrick my phone I tried to get into recovery mode with no success.
I got fed up trying to access download mode by vol. up/down and plugging in usb and decided to just go ahead and open Odin with the usb plugged into my phone and laptop still not in download mode.
On Odin it was on ID: COM 10 so i said screw it, I put in the pit and pda and hit start.
What do you know. it worked !
My phone is up and running now and I'm now trying to find an alternative way to get 2.2 on my vibrant.
Just wanted to share.
Click to expand...
Click to collapse
The ID: COM 10 means that Odin is communicating with your phone in download mode. lol
I thought I noticed this too a while back (when odin 1.8 leaked), but I figured my memory from the previous night's flashing was inaccurate. I'll remember to try if I've tried everything else to no avail.
Sent from my Vibrant using XDA app, Bionix-v 1.21
All~G1 said:
If you weren't in DL mode then what screen were you on?
Click to expand...
Click to collapse
The screen on my phone: picture of a phone and a computer next to it.
So I guess this mean that I don't need to be on download mode on my phone in order to unbrick it. Sweet!
Now only if I could find an easy way to update to 2.2
Sent from my SGH-T959 using XDA App
leechdweler said:
The screen on my phone: picture of a phone and a computer next to it.
So I guess this mean that I don't need to be on download mode on my phone in order to unbrick it. Sweet!
Now only if I could find an easy way to update to 2.2
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
There is a very easy way to get to 2.2.
Root you phone, install CWM and flash a 2.2 rom. There is a Stock 2.2 ROM that will bring you back to un-rooted status if you are worried about warranty.

Selling Phone ! Computer Screen stuck vibrant

So after trying countless methods of getting this guy into download mode i failed i think i really bricked it but all it does is it starts up and right away it shows the phone-!-computer screen and nothing els i tried all the methods that i came across after researching for 5 hours straight. if anyone has a fix tell me if not email me at dencho1992 at gmail with a price or offer. id like over 150 but if i cant get it then oh well. this phone is flawless and has no scratches just got it from a raffel drawing and it even has a case. let me know if u know a fix.
uve probably heard this before:
power off phone
pull out battery
GRAB THIS STUFF : http://forum.xda-developers.com/showthread.php?t=1047087
turn on odin
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode and go back to stock with odin from here!
make sure u put the proper .pit and .pda file in there proper places on odin and ur set to go.
Enjoy and also make sure u have the proper samsung drivers
or buy a usb jig
or
try the aio toolbox
or
contact someone to jtag it, forgot his name on xda but he'll jtag it and fix it for u
were you trying to flash gb bootoders or did you ? if so hold volume up+POWER
haha right when i posted this i went upstairs found a samsung cable and tried it it work first time... didnt show download mode but still reconized in odin.. so happy now and im sure its impossible to brick these guys. so the problem was not the phone it was the cable haha i was using a lg usb so not selling the phone
Lol
Sent from my SGH-T959 using XDA Premium App
Simply solution to fix, just use odin to flash back to stock on that screen.
Just make sure you place all the files on odin first and then plug in your phone.
Should be back to perfect working condition.
aaronhiep said:
Simply solution to fix, just use odin to flash back to stock on that screen.
Just make sure you place all the files on odin first and then plug in your phone.
Should be back to perfect working condition.
Click to expand...
Click to collapse
looks like you only read the first posts in topics.
ferhanmm said:
looks like you only read the first posts in topics.
Click to expand...
Click to collapse
I can't fap to this.
ferhanmm said:
looks like you only read the first posts in topics.
Click to expand...
Click to collapse
What do you mean...?
I read everything else?
EDIT: Okay nevermind..missed one post.
movieaddict said:
uve probably heard this before:
power off phone
pull out battery
GRAB THIS STUFF : http://forum.xda-developers.com/showthread.php?t=1047087
turn on odin
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode and go back to stock with odin from here!
make sure u put the proper .pit and .pda file in there proper places on odin and ur set to go.
Enjoy and also make sure u have the proper samsung drivers
Click to expand...
Click to collapse
Has always worked for me... no matter how bad I think I may have screwed up, this is the saving grace.
Glad you resolved it with another cable OP - lol.
That actually works as Download Mode.
Just sayin'
elementalj said:
haha right when i posted this i went upstairs found a samsung cable and tried it it work first time... didnt show download mode but still reconized in odin.. so happy now and im sure its impossible to brick these guys. so the problem was not the phone it was the cable haha i was using a lg usb so not selling the phone
Click to expand...
Click to collapse
good 4 u.............cuz $150.00 was a dream anyways...
Not Impossible
elementalj said:
haha right when i posted this i went upstairs found a samsung cable and tried it it work first time... didnt show download mode but still reconized in odin.. so happy now and im sure its impossible to brick these guys. so the problem was not the phone it was the cable haha i was using a lg usb so not selling the phone
Click to expand...
Click to collapse
I bricked my phone to where I do not even get the screen to light up.
j56bp said:
good 4 u.............cuz $150.00 was a dream anyways...
Click to expand...
Click to collapse
I was hoping I could get it for $50

Save my phone plzz. It won't boot!!!

Hi everyone,
I try to upgrade my girlfriend's phone via Kies mini last night. After this, IT CAN'T BOOT. I don't know what else to do now. I already search in google and this forum too but can't find any solution.
SOMEONE HELP ME !!!! IT'S REALLY EMERGENCY
Thanks
nguyen47 said:
Hi everyone,
I try to upgrade my girlfriend's phone via Kies mini last night. After this, IT CAN'T BOOT. I don't know what else to do now. I already search in google and this forum too but can't find any solution.
SOMEONE HELP ME !!!! IT'S REALLY EMERGENCY
Thanks
Click to expand...
Click to collapse
More info please
Download mode yes/no?
Sent from my Nexus S 4G using Tapatalk
I can't go to download mode or recovery mode . It scews me
if you have no way into download mode your screwed. Look for different ways into download mode and see if you can get it
Sent from my Nexus S 4G using Tapatalk
If you forsure cant get into download mode ask T-Mobile for a exchange. It is very easy to complete and since it happened after an official update you should have no issues completing the exchange
try pullin battery. plug phone into computer. hold volume up and volume down. put battery in. prest-o change-o you should see an android w/exclamation point in a triangle. if this fails a jig from skorpion(I believe that is his name) might help, just fyi ur vibe is probably 99% un-brickable.
Try to connect ur phone to pc & if you' ve seen an icon phone+pc+!, your in download mode..odin can read it..or you can simultaneously hold vol up + power to get into download mode
Sent from my SGH-T959 using XDA Premium App
You should download aio toolbox! Makes life easier..
Sent from my HTC Wildfire S
feckmu said:
try pullin battery. plug phone into computer. hold volume up and volume down. put battery in. prest-o change-o you should see an android w/exclamation point in a triangle. if this fails a jig from skorpion(I believe that is his name) might help, just fyi ur vibe is probably 99% un-brickable.
Click to expand...
Click to collapse
+1 I agree. Don't panic you'll make it harder on yourself if you do.
Sent from my SGH-T959 using XDA App

[Q] I am bricked! please help!

I flash a wrong kernel (A Nexus 7 kernel), and my nexus4 become brick. No matter what I did, it still no response. I can't boot to fastboot, even i can't turn it on. Please help....
connect to PC, only show a QHSUSB_DLOAD in Device Manager. But still can't turn it on. Please help, anything i can do to fix it??
Read through the ENTIRE other thread you posted in, all the info is there.
No idea how you accidently flash wrong a kernel for the wrong device.
Get into bootloader mode. (can you? Google on how to do it manually)
Or
Plug the phone in via usb if you had adb used on it and type adb reboot bootloader (hence if use toolkit you won't have this set up.)
Sent from my Nexus 4 using xda premium
These guys are way to eager to flash any and everything on there devices
yyz71 said:
These guys are way to eager to flash any and everything on there devices
Click to expand...
Click to collapse
It just seems impossible on finding kernel for other phones on a nexus 4 forum.
Oh what's this? A link to a flash able zip? Let's flash it without thinking.
Think before you flash op.... And dont use toolkits.
Sent from my Nexus 4 using xda premium
zephiK said:
It just seems impossible on finding kernel for other phones on a nexus 4 forum.
Oh what's this? A link to a flash able zip? Let's flash it without thinking.
Think before you flash op.... And dont use toolkits.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
So true:good:
I can't connect PC with adb. I connect PC can't show the charge icon in my phone. And PC can only identify the device as QHSUSB_DLOAD.
So, what can i do..?
yatyuk said:
I can't connect PC with adb. I connect PC can't show the charge icon in my phone. And PC can only identify the device as QHSUSB_DLOAD.
So, what can i do..?
Click to expand...
Click to collapse
Send that puppy back, & get a new one...
Sent from my HTC One X using xda premium
rayford85 said:
Send that puppy back, & get a new one...
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
I really dislike people recommending to send the phone back (RMA) to Google for a user's own (I'll be polite here) lack of awareness and understanding of what they are doing. This person should continue to look for solutions to get it working and if not.. well, to bad. Lesson learnt. Buy another Nexus 4.
Besides that fastboot should still be accessible. If OP can eventually get into fastboot then all will be well.
Go read read FAQ thread,will show yo proper way to get back to bootloader mood don't be lazy that won't help,agree getting to bootloader mode then fastboot proper n4 kernel.try it on other pc I'd you cannot in this pc,make sure you install the driver.
Read before you ask
Sent from my HTC One X using xda app-developers app
Zackconsole said:
Go read read FAQ thread,will show yo proper way to get back to bootloader mood don't be lazy that won't help,agree getting to bootloader mode then fastboot proper n4 kernel.try it on other pc I'd you cannot in this pc,make sure you install the driver.
Read before you ask
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Bro, i already read some thread... but still not work...i try any combine key with connection to PC, and only red LED appeared few sec and then off again. I think i had driver, because i can use toolkit, unlock and root via adb before. Or can u please give me the link which i need to read? I search about the "qhsusb_dload" problem. Some tell me can easy to fix it by using power+ Vol+/- with connection to PC. But i try many times, still not work... I know i can fix it, if i can enter bootloader. But now i can't turn my phone on.... any suggestion? Thank you.
yatyuk said:
Bro, i already read some thread... but still not work...i try any combine key with connection to PC, and only red LED appeared few sec and then off again. I think i had driver, because i can use toolkit, unlock and root via adb before. Or can u please give me the link which i need to read? I search about the "qhsusb_dload" problem. Some tell me can easy to fix it by using power+ Vol+/- with connection to PC. But i try many times, still not work... I know i can fix it, if i can enter bootloader. But now i can't turn my phone on.... any suggestion? Thank you.
Click to expand...
Click to collapse
Its actually appalling the lack of support users get on here, instead being on point and helping the man out all they get is criticized.
Anyways Back to topic: yatyuk your device isn't bricked it still has life. I had the exact same issue before when connecting to the PC I was also getting the "qhsusb_dload" driver alert.
Click on the Link and Follow the steps if you can get into Fastboot Mode. Check the Post #241 of mine.
LINK
Happy Recovery!
risktaker84 said:
Its actually appalling the lack of support users get on here, instead being on point and helping the man out all they get is criticized.
Anyways Back to topic: yatyuk your device isn't bricked it still has life. I had the exact same issue before when connecting to the PC I was also getting the "qhsusb_dload" driver alert.
Click on the Link and Follow the steps if you can get into Fastboot Mode. Check the Post #241 of mine.
LINK
Happy Recovery!
Click to expand...
Click to collapse
I read your post already bro!! Thanks for your help. But, i don't understand #241. How can I get into fastboot mode?
Is the first step "1) Once in Fastboot mode, through Nexus 4 Toolkit I flashed the Clock Work Recovery. " ?
Now I connect my phone to PC, then Power + Vol- for ~10sec, my phone will had red led for few second and then off again.
risktaker84 said:
Its actually appalling the lack of support users get on here, instead being on point and helping the man out all they get is criticized.
Anyways Back to topic: yatyuk your device isn't bricked it still has life. I had the exact same issue before when connecting to the PC I was also getting the "qhsusb_dload" driver alert.
Click on the Link and Follow the steps if you can get into Fastboot Mode. Check the Post #241 of mine.
LINK
Happy Recovery!
Click to expand...
Click to collapse
Bro, can you please teach me how to enter fastboot mode? I try using all combine key with connection to PC, but only red led appear for few second then off.
I like how all the people who manage to do something so idiotic to these phones band together and stick up for each other. There is no possible way to flash the wrong nexus kernel. any who, the solution has been posted plenty of times. Enter recovery then fast food.
Sent from my Nexus 4 using xda premium
yatyuk said:
Bro, can you please teach me how to enter fastboot mode? I try using all combine key with connection to PC, but only red led appear for few second then off.
Click to expand...
Click to collapse
To get into Fastboot:
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
So for all the people with Bricked devices all hope is not lost. Follow this procedure to get into Fastboot.
1) Press the Power button for more then 5 seconds to do a Hard Reset. This is where you screen is completely turned off.
2) Now take your LG manufactured USB connect it to the PC. Do not connect it to the phone just yet.
3) Holding the Vol Down and Power together and NOW connect your other end of the USB connector to the phone and then your phone should give you a slight vibration and you should see the Fastboot screen (Android lying on the back)
NOTE: Make sure as soon as you see then fastboot mode Let go of the Vol and Power Button right away!
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Click to expand...
Click to collapse
risktaker84 said:
To get into Fastboot:
Click to expand...
Click to collapse
I try many times.....but still can't turn on...
My situation is
1) Press the Power button for more then 5 seconds to do a Hard Reset. This is where you screen is completely turned off.
--->My phone is always turned off, when i disconnect to PC....
2) Now take your LG manufactured USB connect it to the PC. Do not connect it to the phone just yet.
--->This step is ok
3) Holding the Vol Down and Power together and NOW connect your other end of the USB connector to the phone and then your phone should give you a slight vibration and you should see the Fastboot screen (Android lying on the back)
---> when i connect the usb, the phone immediately Red LED on and no vibration. LED on few second, my phone off again and remind no response
Is that mean no hope
yatyuk, use this thread for further inquiry LINK. I don't want to go back and forth in between different threads with the same issues.
Try this,
Did you ever get a Battery sign when you had it connected to the PC or AC for power?
Try this, I don't know if its gonna work or not but plug your phone in the wall receptacle for AC Charge and leave it for a while. On AC, the phone most likely, if completely dead, will stay idle but most likely jump back to Battery sign showing its charging or not.
When that happens, leave like that for a hour or two.
Let me know what happens. Good luck.
Click to expand...
Click to collapse
Thank you for your friendly help
I had read your post already, and i will keep on trying...

Categories

Resources