Related
So, I've been up all night after buying this Fire trying to fix it, and I've decided to go along with my original decision to just return it. I'll rewind a bit to give you guys a play by play to show how I got to what I've determined is a FUBAR situation, and hopefully you guys can help me at least remove TWRP so I can return it without much issue.
If it's tl;dr, I bolded the main errors I got from the console and TWRP
1. I purchased my Kindle Fire from Best Buy with a 1 Year Protection plan, so in all reality, I could just break it in half and get a replacement, but I don't necessarily want a replacement.
2. I initially purchased it for my mom, but when I found out that the stock Fire OS didn't have Korean input or the option to have a Korean interface, I did a bit of research and started reading up on how to root, how to install the market, things like that. My mom's not a native English speaker, so this was an important thing for her, etc etc.
3. I read multiple guides on this forum and others, and rooted using the guide found here , since a few of the threads I was reading through seemed to point in that direction, and I had a bad experience with SOCR on my Droid X.
4. The root was successful, so I moved on and used KFU .3 to do the rest of the important bits; android market, etc etc.
5. Everything was working fine, but, after looking through it, I realized that it wouldn't work for what I needed it to, and I would have to return it, so, I attempted to unroot the tablet using TWRP's interface.
6. I cleared the cache, the devlak cache, and system wiped, then restored using the system restore point in the TWRP folder, figuring after that, the Kindle would boot up with stock OS and then I would just system restore the default way. This method got me stuck in a recovery-loop, and no matter what I did, the Fire always booted to recovery mode.
7. I figured I had bricked it, so I followed the steps in this guide, but always seemed to have problems at the step where I have to chmod 755 of the zergRush. I get "Not a directory" error, which after doing some research, I believe is on account of me no longer having rw privilege?
8. I looked around some more, ignoring that guide, and found a method to force-push the amazon update, but TWRP would no longer run the update, saying it could not Mount the SD Card due to an Invalid Argument, and I have yet to determine what that means.
9. After manually changing it to fastboot in an attempt to at least get it out of recovery mode, I have the Fire recognizable as a device in my ADB, but it is now stuck in a fastboot loop, and when I attempt to re-root it in order to give myself rw privileges again, it stalls on "waiting for device" and never gets past that point.
Update
I tried to reroot while the Fire was stuck in the Kindle Fire splash screen using the KFU tool, and used zergRush, but the error message I got was - exec '/system/bin/sh' failed: No such file or directory (2) - 4 times over.
What I think the problem is, is that when I wiped the cache/devlak cache/ and system reformatted, it wiped my SU privileges, and as a result, no longer allowed me to write the backup to the Fire, therefore leaving me in a perpetual state of limbo?
What I'm asking for from you is;
What can I do to fix this?
Is there any more information you need/want from me?
And finally,
Is there an easy way for me to remove TWRP from the system?
Thank you.
Hi!
There are a lot of great tips regarding TWRP and fastboot over at RootzWiki.
Some users are reporting the same fastboot loop that you currently experience. I suggest you read the thread and follow the suggestions. One suggestion which you may want to try first is the one in this post.
Thank you for the reply. I did as you suggested and followed the links and the post on the guide, and although that did change the nature of my fastboot loop, I'm still stuck in a fastboot loop.
I was initially stuck in a fastboot loop on the Kindle Fire logo, which I determined by running fastboot devices, while it was stuck on that logo, and it showed the device as being fastboot. After following that guide, and using the hard reset, then using the "How to Unbrick" in order to change back to a normal boot, I'm stuck in a fastboot loop on the TWRP splash screen of a triangle with a fire in it. I'll continue looking through the guides to see if I can solve the problem, but thank you once again, and sorry for not clarifying which type of fastboot loop I was in.
Sorry it didn't work out! However...
isjonamon said:
I'm stuck in a fastboot loop on the TWRP splash screen of a triangle with a fire in it.
Click to expand...
Click to collapse
I really though the solution posted over at RootzWizi would solve this problem. Getting stuck at the yellow triangle is 'common'. I really though adding
%SingleAdbInterface% = USB_Install, USB\VID_18D1&PID_0100
%CompositeAdbInterface% = USB_Install, USB\VID_18D1&PID_0100&MI_01
Click to expand...
Click to collapse
to android_winusb.inf would solve it. But if you are able to recognize your Fire in fastboot mode via your PC, I guess that's not where your problem is.
Is this tip to any help?
And lastly... the great Kindle Fire Utility thread is worth checking out, in case you haven't already
I hope you'll find a solution to this problem!
I've tried the tip you linked me to, and sadly it didn't do anything for me.
Moving on, though, I'm reading through the KFU thread again to see if there was anything I missed, and decided I might as well try re-flashing to CM7 to see if I can at least get it working up to a rooted/rom standpoint. I figure from there, I can at least have a working platform to factory reset from. If I can't do that... well...
Does anyone know a way to just return everything to factory settings? To just wipe everything and make it so it turns on like it's out of the box? Either through adb commands, or TWRP or anything?
Sorry for the double post, but I managed to get CM7 back up on my Fire, and managed to regain SU access. Can anyone point me to a guide to restoring it back to its former "glory" so I can return it?
Fixed it!!
For anyone interested, this is what worked for me;
From where I ended up with the problem, I followed hachiueno's advice and read through the KFU's thread as well as the TWRP thread on Rootzwiki, that led me to adding those lines to the device firmware, which I think was the first step in the solution, so...
Step 1. Add
%SingleAdbInterface% = USB_Install, USB\VID_18D1&PID_0100
%CompositeAdbInterface% = USB_Install, USB\VID_18D1&PID_0100&MI_01
to android_winusb.inf , then restart your computer with your Fire unplugged.
After that, I was inspired, through reading the KFU thread, to attempt to manually install CM7 since I wasn't having much luck zergRushing on my own, so, I went to the CM7 thread and pushed the Update.zip there, and used my TWRP to install that, effectively rebuilding my filestructure, since it seems the Kindle Fire doesn't have so much as a SH folder in it.
Step 2. MANUALLY (maybe) install CM7 if you can.
Once I got CM7 up and working, using the USB mounting option, I replaced the update.zip in the sdcard folder with the Amazon 6.2 firmware downloaded from their website, renamed to update.zip, and then unmounted my fire from my laptop.
Step 3. Download the Amazon 6.2 Firmware from amazon's website (I can't post...), rename it to update.zip, and replace the CM7 mod update.zip in your /sdcard directory with it.
Then, I figured if I ran TWRP like it was supposed to run, and just ran the update.zip like any other ROM, it should fill in the blanks in the filesstructure, bypassing Amazon's own lack of certain folders, and various other things, filling in the gaps as they were. The next step might be entirely redundant, since I'm a bit clueless, and it might have been entirely luck on my part, but I initially forgot to wipe my cache, devlak cache, and system restore, so I did all that and did it again, and my wishful thinking leads me to believe that doing that saved my ass from having a crapton of errors....
Step 4. Using the install function on TWRP, install the renamed Amazon update.zip, reboot, clear your cache, devlak cache, system reformat, then reinstall the update.zip. Reboot one more time, and you should come up to the Kindle Fire splash screen. Leave it for a few minutes, and it'll be like it just came out of the box.
Thanks for all your help. I love you. Seriously. No homo. Maybe a little. I love you.
Good to hear that you managed to boot it again!
isjonamon said:
Sorry for the double post, but I managed to get CM7 back up on my Fire, and managed to regain SU access. Can anyone point me to a guide to restoring it back to its former "glory" so I can return it?
Click to expand...
Click to collapse
This guide seems to be an easy solution to this. However, no one has replied any success or failure, so not sure if it's 100% bulletproof for everyone... if I were you, I would follow JackpotClavin's guide here. He's a known developer here and knows what he's doing, and many successful replies from users having used this method... so yeah, just to be 'sure' (can you ever be...?) that you won't experience any further problems, I recommend the last one.
I actually used the first guide in order to get the Amazon update, but couldn't post a reply since I'm still a noob. I had to do a few things differently, and ultimately got a few different results, but posted up my own version of the steps.
Once again, thanks for all your help!
It seems to me that the majority of problems people are having are driver related. When I was using KFU to install TWRP it stalled half way through and just said waiting for device. Just had to install drivers again and it happily completed the install.
Sent from my Kindle Fire using xda premium
all u needed do initially was change bootmode it seemed. thrn u went and did all kinds of stuff that wasnt necessary.
sent from my kindle fire
smirkis said:
all u needed do initially was change bootmode it seemed. thrn u went and did all kinds of stuff that wasnt necessary.
sent from my kindle fire
Click to expand...
Click to collapse
I actually changed bootmodes quite frequently, following multiple threads and guides, changing from recovery, to normal, to fastboot, and back and forth when called for. Changing to fastboot stuck me in an eternal fastboot loop, changing to normal reverted me to a recovery loop, and recovery was the only bootmode I could access adb from.
Sheolrock said:
It seems to me that the majority of problems people are having are driver related. When I was using KFU to install TWRP it stalled half way through and just said waiting for device. Just had to install drivers again and it happily completed the install.
Sent from my Kindle Fire using xda premium
Click to expand...
Click to collapse
Driver issues seemed to be part of the problem for me, but just updating the drivers didn't fix the issue entirely. I'm jealous that you got it to work with just a driver update...
Hey i believe im in the same problem but i keep reading the posts and im still stuck and i have no idea what to do im worried that i cant fix it.... Some please help me ASAP
Thanks in advance
wrong boot mode ?
with adb:
adb shell su -c "idme bootmode 4000"
adb reboot
with fastboot:
fastboot -i 0x1949 oem idme bootmode 4000
fastboot reboot
bad drivers ?
http://forum.xda-developers.com/showpost.php?p=20855280&postcount=54
I have had the looping problem and none of these would fix it. I got it to work by adding those lines to android_winusb and running the run.bat, trying to make it switch to normal mode as the kindle was turning on. Somewhere along the yellow triangle when it was loading it accepted the command from KFU. Hope this helps, only thing that worked for me.
the drivers i included contain all the necessary entries in adb_usb.ini and android_winusb.inf
Please can someone help me!?
I did idme bootmode 4002 and now my fire won't boot up or show up in android adb. Any solution?
awidawad said:
I did idme bootmode 4002 and now my fire won't boot up or show up in android adb. Any solution?
Click to expand...
Click to collapse
you switched it to fastboot (4002) - adb commands are not working in fastboot mode !
little guide:
driver (under android phone):
normal & recovery boot: -> android composite adb interface
fastboot: -> android adb interface
here all the possible commands to change bootmode:
with adb (secure kernel):
adb shell su -c "idme bootmode 4000"
adb reboot
or (twrp or unsecure kernel):
adb shell idme bootmode 4000
adb reboot
with fastboot:
fastboot -i 0x1949 oem idme bootmode 4000
fastboot -i 0x1949 reboot
or:
fastboot -i 0x18d1 oem idme bootmode 4000
fastboot -i 0x18d1 reboot
or:
fastboot oem idme bootmode 4000
fastboot reboot
the number is the bootmode you want to switch to:
normal boot -> 4000
fastboot -> 4002
boot to recovery -> 5001
and if you know:
normal boot -> adb commands YES -> fastboot commands NO
fastboot -> adb commands NO -> fastboot commands YES
recovery -> adb commands YES -> fastboot commands NO
then you only have to count 1 and 1 together and can master nearly each hanging situation !
Click to expand...
Click to collapse
Not sure if this is totally helpful to anyone but originally I thought the thread was started with a posting of being stuck bootlooping into twrp in recovery mode with a complete loss of file structure. I had this same issue my Kindle would not start in anything but straight to twrp and if I tried to flash my CM9 ICS rom it was not there and only the twrp folder empty was. So I went to mount and mounted usb storage and moved the stock update zip file from amazon to the twrp folder and flashed that. Worked like a charm now I appear to be straight stock. I am no developer of this stuff I just am a bit of a tinkerer so don't understand all the code stuff but it starts like a normal kindle and appears totally stock. So hopefuly that helps you return your deice to stock for return or to continue wahtever modifications you intend.
2992
I have bricked Kindle fire while trying to install Android Market. To the point that shell doesn't work.
I made myself a factory cable. So I can easily go into fastboot mode. I tried various ways that people post in different threads. None seem to work as expected.
Is there a way to completely flash the original amazon ROM in fastboot?
Update: fastboot gives me < waiting for device > now. I'm still using the same factory cable that I made myself and KF looks like it is in fastboot state - the logo shows up on the screen.
I will recheck factory cable a little later. Maybe it broke or something. Though KF still recognizes it and goes into fastboot mode.
Any ideas?
There seems to be very little help on how to use a factory cable. I am in a similar boat as you. Shell works for me but adb commands do not. I can't push or pull or install. I can navigate, change file names, and move files to some directories. My problem is that I don't know how to put the stock rom on and flash it. I actually have 6.2 on the sdcard but don't know what to do with it.
As for your problem, I experienced the same thing. adb devices didn't list my KF but I could see it in lsusb. I typed the usb description at $ "1949:0006 Lab126" and it called me an idiot or something but then I typed ./adb shell and vioala. I'm sure that didn't do anything and won't ever work again but there you have it.
I have a couple of open questions out there to see if we can get help and if I learn anything I will make sure you hear it next.
ToonaKan
Dmitry_G said:
Update: fastboot gives me < waiting for device > now. I'm still using the same factory cable that I made myself and KF looks like it is in fastboot state - the logo shows up on the screen.
I will recheck factory cable a little later. Maybe it broke or something. Though KF still recognizes it and goes into fastboot mode.
Any ideas?
Click to expand...
Click to collapse
You must insert cable, when switch off kindle by pressing button about 20sec and press once again, kindle will be in fastboot.
After kindle will be in fastboot, with Kindle Fire Utility v.6 install TWRP recovery and with recovey install stock or CM7 firmaware.
Admittedly, I am a little green when it comes to this but I never got it to list in fastboot devices either with a cable (and I am not sure I am supposed to), you can check if its connected in fastboot mode by:
fastboot -i 0x1949 getvar product
it should return "kindle"
from there I did:
fastboot -i 0x1949 boot twrp-blaze-2.0.0RC0.img
fastboot oem idme bootmode 4000
fastboot reboot
To get twrp up and running then I flashed the prerooted 6.2.1. Going back to the orginal rom should be similar
Ok. Passing "-i 0x1949" to fastboot helped and now I can communicate with KF in fastboot.
But a new problem has surfaced. I'm trying to install TWRP:
Code:
fastboot -i 0x1949 boot twrp-blaze-2.0.0RC0.img
It writes "downloading 'boot.img'" and gets stuck there. I waited for 15 minutes.
Ideas?
You need to now check to make sure your drivers are now up to date.
So it seems that I can't really do any operations with fastboot. Every command just freezes at the first thing it does. Weird.
I'm on a mac. I never installed any drivers for KF - it just worked. Do I even need a driver for KF on a mac?
There must have been something with the factory cable. I finally managed to load TWRP.
Now I'm trying to install stock ROM renamed to update.zip. I push it into /sdcard. Then in TWRP I tap on Install and select update.zip.
I get:
E:failed to mount /sdcard (Invalid argument)
E:Can't mount /sdcard/update.zip
What does that mean?
Ok guys. I found the solution. "E:failed to mount /sdcard (Invalid argument)" tells you that your sdcard is not formatted correctly. Here is the fix I did.
I already have TWRP installed and also have a factory cable. But I still have a few questions.
1. With a factory cable, is there any way to directly flash the stock firmware or do you always have to install and use TWRP?
2. From reading about TWRP, it seems that after installing it, you can then load the stock firmware onto the sdcard directory and then complete the restore operation. As a safeguard, and to make things easier, I have already put a copy of 'update.zip' on there just in case I need it. My question is - on an unrooted Fire, would it not be a good idea to stick 'update.zip' on the sdcard before rooting? That way if something goes wrong, all you need to do is get TWRP on there and the restore file is already in place. Or am I being overly cautious?
I rooted it and installed CM7 on it, CM7 was getting a boot loop so I did a factory reset, I read online that I should reinstall CM7 to help get rid o the boot loop, i turned off the kindle, putting it into recovery mod (like a t**t). Stuck in FFF boot loop, windows reconizses its an ADB device but nether the KF utility, nor ADB thinks its plugged in. I can mount it as a mass storage device. Any help is appreciated.
Edit: This picture better explains what is going on, but as i am a new user, i cannot post a link so I'm sorry but you will have to copy and paste this : i.imgur.com/3Lcsh.png
Did you try this?
adb shell
idme bootmode 4000
reboot
Droidanian said:
Did you try this?
adb shell
idme bootmode 4000
reboot
Click to expand...
Click to collapse
As i was trying to explain adb shell keeps telling me the device isn't found
And before you ask, yes i have installed the drivers and yes i have reinstalled them and yes i have rebooted the device and my computer
Did you try using the command prompt instead of the KFU? I had success doing it manually.
yup, no luck
Remove the KF, uninstall the drivers, restart Windows, and install them manually.
That should work.
no luck, still stuck
Did you edit the "adb_usb" and "android_winusb" files?
HOLY **** after ~ 4 hours of tinkering i got it!!!
Within the KFU i installed the TWRP recovery and while it said waiting for device, I restarted it. I had done this before but it didn't take.
I LOVE THE KFU, IF I HAD ANY MONEY I WOULD GIVE IT TO THEM.
If anyone in the future has this problem and has any questions, PM me and I will try to help you as best as I can.
UPDATE 3: I've got it back to as stock as I can get it. I think I'm going to just return it and get a new one. Thank you all for your help.
UPDATE 2: As of right now, I'd like to completely remove FFF from the device, but I can only use fastboot to do it. I have absolutely no adb access. Is there a way?
UPDATE: Here is a video showing what is happening to my KF: http://www.youtube.com/watch?v=MH6oUg1NmC0
I hate to start another thread about boot loops/bricking, but I'm not sure what's going on with my fire.
I had CM7 installed successfully since the day after Christmas. This morning I woke up and my Fire was being really sluggish, so I rebooted it (I did not select reboot into recovery).
After it powered on, I was stuck at the CM7 boot screen (with the skateboarding android). I let it sit, but no luck. I went into TWRP to try and restore the backup I made of the stock rom. It looked successful, but when I rebooted I was stuck at the Kindle Fire boot screen.
Next, I tried wiping the device and re-installing CM7, but I received an error (something along the lines of E:Error unable to find /tmp/sideload/blahblah).
So I again restored my backup of the stock rom. Now when I power on my Fire I see the yellow triangle, then the kindle fire logo, yellow triangle, kindle fire logo, and it just keeps repeating. The problem is I am unable to connect to adb because the PC only seems to recognize the adb device for a few seconds after the yellow triangle, which does not give me enough time to fix the problem.
Any ideas?
looks like you'r out of battery ! the kf is rebooting !
would take the wall charger and charge for an hour
it's not possible to charge with the computer - it lasts forever
then it should respond in a stable state
b63 said:
looks like you'r out of battery ! the kf is rebooting !
would take the wall charger and charge for an hour
it's not possible to charge with the computer - it lasts forever
then it should respond in a stable state
Click to expand...
Click to collapse
Recovery shows my battery level to be at 53%. I've got it on the charger now, but I have a feeling there is something else going on.
Also, I am unable to mount my Fire's SD to my computer in recovery. It looks like it is working, but my computer never acknowledges it.
maybe because your last installation failed
nevertheless i would try to charge and then go in twrp and retry the installation
if that's not sucessful i would try to switch the kf to fastboot and copy a new rom. stock or prerooted stock or cm7 - whatever you like
in twrp there is a point "mount" - sdcard - then you should get it from computer
b63 said:
maybe because your last installation failed
nevertheless i would try to charge and then go in twrp and retry the installation
if that's not sucessful i would try to switch the kf to fastboot and copy a new rom. stock or prerooted stock or cm7 - whatever you like
in twrp there is a point "mount" - sdcard - then you should get it from computer
Click to expand...
Click to collapse
Thanks for the reply. Is adb required to get into fastboot? The problem is that I am unable to get into adb because my computer only sees the Fire for about 1 second. When I go into device manager, I don't see it at all.
EDIT: Yeah, I see the mount in TWRP, but it does not do anything when I select it.
Hi Im a beginner but Id like to try to help :
In case you become desperate ignore twrp's battery display and try wall charger.
Anorher idea id have is to shut down throughr twrp and start up then instead of rebooting.
ADB is needed to get into fastboot, but it's quick. If you use KFU, you can probably hit the option during the couple seconds you have available. I would say your best bet, however, is booting into twrp, doing a full wipe of system, cache, davlik cache, and maybe data, and then trying the rom install again.
skourg3 said:
ADB is needed to get into fastboot, but it's quick. If you use KFU, you can probably hit the option during the couple seconds you have available. I would say your best bet, however, is booting into twrp, doing a full wipe of system, cache, davlik cache, and maybe data, and then trying the rom install again.
Click to expand...
Click to collapse
So this time it looks like the installation worked in TWRP, but after reboot now I'm stuck at the CM7 boot screen. This is at least some progress, so when I get home I'll see what I can do.
Sent via my internet connected mobile cellular telephone.
Well, the battery is definitely not the issue. I've been trying to get fastboot, but the problem is the fact that I can not get adb. Has anyone else had issues with getting adb? I've already tried to install the drivers, and that doesn't work.
EDIT: I've tried issuing "adb devices" from the command prompt repeatedly as soon as I hear the ding until it disconnects a second later, but still I have had no luck.
Also, I found this thread in which someone else appears to have had a similar issue to mine.
[Q] New kind of unfixable Super Brick?
at the moment adb is useless - you should try to get the device in fastboot mode - correctly recognised from your computer - then work with fastboot commands - if you don't get that then your next opinion is buying or making a factory cable - but we should try to avoid that ...
b63 said:
at the moment adb is useless - you should try to get the device in fastboot mode - correctly recognised from your computer - then work with fastboot commands - if you don't get that then your next opinion is buying or making a factory cable - but we should try to avoid that ...
Click to expand...
Click to collapse
I can not seem to get fastboot to work either. Does fastboot rely on adb? Or do you just run the .exe file? I tried to run it, and nothing happened.
fastboot has nothing to do with adb - calling just the exe does nothing -
you have to issue fastboot commands
ok have reread the whole thread and have some ideas:
your currently stuck at the cm7 boot screen ?
have you used the "stock rom version" to wipe data and cache partitions as described here ?
http://forum.xda-developers.com/showthread.php?t=1390773
perhaps it will help to wipe data/cache with twrp ...
b63 said:
fastboot has nothing to do with adb - calling just the exe does nothing -
you have to issue fastboot commands
ok have reread the whole thread and have some ideas:
your currently stuck at the cm7 boot screen ?
have you used the "stock rom version" to wipe data and cache partitions as described here ?
http://forum.xda-developers.com/showthread.php?t=1390773
perhaps it will help to wipe data/cache with twrp ...
Click to expand...
Click to collapse
Just wanted to let you know I updated the OP with a video showing what is happening to my KF.
Haven't tried that particular rom yet, but I have wiped data and cache and attempted to re-install CM7.
great idea with the video !!!
b63 said:
fastboot has nothing to do with adb - calling just the exe does nothing -
you have to issue fastboot commands
ok have reread the whole thread and have some ideas:
your currently stuck at the cm7 boot screen ?
have you used the "stock rom version" to wipe data and cache partitions as described here ?
http://forum.xda-developers.com/showthread.php?t=1390773
perhaps it will help to wipe data/cache with twrp ...
Click to expand...
Click to collapse
OK, so I restored my original rooted kindle rom, but I still can't get into fastboot because of the problem I showed in the video. It is doing exactly the same thing, just instead of the CM7 boot screen, it is the Kindle Fire boot screen.
Is is possible to get into fastboot without the computer? Can anyone think of a reason why I would not be able to mount my device in TWRP?
I just want to understand something about fastboot... can you upload and flash roms with it? Or can you only get TWRP / FFF with it? I ask because I already have them, and I still can't do anything (mount from inside TWRP doesn't work). Thanks!
Sent via my internet connected mobile cellular telephone.
with fastboot you can install the newest fff and if you need twrp
but with the newest fff you can issue ""fastboot oem format"
see here:
http://forum.xda-developers.com/showthread.php?t=1369405
that should solve every issue ...
b63 said:
with fastboot you can install the newest fff and if you need twrp
but with the newest fff you can issue ""fastboot oem format"
see here:
http://forum.xda-developers.com/showthread.php?t=1369405
that should solve every issue ...
Click to expand...
Click to collapse
Cool. I just ordered one of SkOrPn's cables, so once I get it I'll be sure to give an update. Thanks for all the help so far!
The cable isn't need when you have the FFF bootloader, in fact, when your computer does see the device for the short amount of time shown in the video, fastboot is active. It's a feature of FFF. Fastboot is a command line tool like adb but is used for different things. It comes in Android sdk which if you have that, you should update the tools packages in the Android manager and it will update adb and fastboot. It looks like something is not working correctly in twrp and the OS is failing to load. I'm not sure you need to oem format tho.....
At some point you had to have used fastboot to install twrp and/or FFF.... Unless you used adb dd? :what:
Anyway, I can help more but it's late where I am, need to sleep. Was going to write more but... Need sleep lol. I'll post some questions and check back tomorrow.
Have you used adb before? Do you know if platform-tools is in your environment variables PATH? In other words, can you open up cmd and type adb or do you need to "cd" to platform-tools then use adb? If you know where adb is located? If so, is a file called fastboot in there? (Maby called fastboot.exe)
foxdog66 said:
The cable isn't need when you have the FFF bootloader, in fact, when your computer does see the device for the short amount of time shown in the video, fastboot is active. It's a feature of FFF. Fastboot is a command line tool like adb but is used for different things. It comes in Android sdk which if you have that, you should update the tools packages in the Android manager and it will update adb and fastboot. It looks like something is not working correctly in twrp and the OS is failing to load. I'm not sure you need to oem format tho.....
At some point you had to have used fastboot to install twrp and/or FFF.... Unless you used adb dd? :what:
Anyway, I can help more but it's late where I am, need to sleep. Was going to write more but... Need sleep lol. I'll post some questions and check back tomorrow.
Have you used adb before? Do you know if platform-tools is in your environment variables PATH? In other words, can you open up cmd and type adb or do you need to "cd" to platform-tools then use adb? If you know where adb is located? If so, is a file called fastboot in there? (Maby called fastboot.exe)
Click to expand...
Click to collapse
Yep, I've used adb successfully, and it is set up as an environmental variable. I actually installed FFF and TWRP with the KFU. Problem is I think something else is botched; perhaps it is TWRP itself, since I am unable to mount from TWRP. I'll try again when I get home.
Sent via my internet connected mobile cellular telephone.
So I was messing around with my rooted Kindle Fire trying to apply a new theme to my Ice Cream Sandwich Launcher with metamorph and totally screwed everything up. I rebooted my Kindle Fire and it was stuck on the kindle fire logo screen. This morning I tried to unbrick it with the Kindle Fire Unbrick utility but it screwed up everything even more. Now i'm stuck on the yellow triangle screen (firefirefire), I realized that I totally screwed up the framework apk in the system folder. My computer will recognize the Kindle Fire but it comes up as "kindle" in the Other Devices in the "Device Manager". I tried to update the driver but the wizard will say that it cannot find any driver. What should I do? I already read many other posts but throughout the steps I get stuck on one and cannot continue.
I suggest try the following:
Adb kill-server
Adb start-server
fastboot -i 0x1949 oem idme bootmode 4000
fastboot -i 0x1949 reboot
or
adb shell idme bootmode 4000
adb shell reboot
Good luck
Sent from my Amazon Kindle Fire using Tapatalk
I know how to fix the yellow triangle, do this
1.Download kindle fire utility
2.Unzip kindle fire utility
3.To install the driver,its easy,just plug in your kindle, when it pops up with the install wizard say pick from the location of: KindleFireUtility>drivers>kindle 4.run kindle fire utility,select 1 then select 1 again
That's it, hope it helps
fedorp said:
So I was messing around with my rooted Kindle Fire trying to apply a new theme to my Ice Cream Sandwich Launcher with metamorph and totally screwed everything up. I rebooted my Kindle Fire and it was stuck on the kindle fire logo screen. This morning I tried to unbrick it with the Kindle Fire Unbrick utility but it screwed up everything even more. Now i'm stuck on the yellow triangle screen (firefirefire), I realized that I totally screwed up the framework apk in the system folder. My computer will recognize the Kindle Fire but it comes up as "kindle" in the Other Devices in the "Device Manager". I tried to update the driver but the wizard will say that it cannot find any driver. What should I do? I already read many other posts but throughout the steps I get stuck on one and cannot continue.
Click to expand...
Click to collapse
First off, what rom are you running on you Kindle stock 6.2.2, CM7, CM9? Did you make a backup of the original framework-res.apk? If so follow these instructions (assuming you have adb working):
if original framework-res.apk is stored on you computer:
from command prompt (start -> in search box type cmd then enter) cd to where you have backed up the original file if it's on your computer
then type the following commands
adb devices
adb remount
adb push framework-res.apk /system/framework
adb shell chmod 644 /system/framework/framework-res.apk
adb reboot
if the original file is stored on your kindle:
adb devices
adb remount
adb mv /path-to-original/framework-res.apk /system/framework/framework-res.apk (fill in actual path in "path-to-original")
adb shell chmod 644 /system/framework-res.apk
adb reboot
Hint: If you didn't make copy of original framework-res.apk, you can always download and open up the install zip for your rom and extract the original file. Good Luck!
Kindle Fire Bricked PLEASE HELP!!!
So like every other noob with a new kindle fire 6.2.2 i tried to root it, after nearly 3 days of trying different ways i was able to root it i then proceeded to install go launcher ex once i selected go launcher it froze and i have not been able to boot sense.i was stuck on kindle fire logo and it would not do anything i tried to run the unbrick utility 1.1 and 1.0 i get device not found but it does say it was unbricked but it is not, now let me say how stupid i was to not create a backup i know i know ugh im kicking myself now... my computer sees it under device manager as android adb interface when pluged in and i see the usb connection in the task bar on WIN 7, but i cannot access it as a protable drive. when i turn it on it will only load twrp.im guessing im screwed and everything is gone... any help will be much much appreciated, im not sure what other info you may need at this point and i am sorry for my ignorance in advance. thank you for any help!
and yes i have tried several things to get it working again which has gotten me to this worse point...i was able to see it normaly as protable device but i dont know what i did to get this.
somebodyssomewhere:
- boot to twrp
- open shell -> "adb shell"
- issue "echo /dev/block/mmcblk0p12 > /sys/devices/platform/usb_mass_storage/lun0/file"
- now the sdcard should mount to the computer
now you can delete the faulty .apk of go launcher with adb commands or install a new rom:
- now you can download and copy your new rom to sdcard (ie prerooted stock)
- mount sdcard -> "mount /sdcard"
- exit adb shell -> "exit"
- tap install in twrp and install the new rom
- ignore errors about volume "misc" - the kf don't have a volume "misc"
- on the screen where you return after installation tap clear dalvik/cache
in eighter case set the bootmode back to normal:
- set boot mode to normal -> "adb shell idme bootmode 4000"
- reboot -> "adb reboot"
thank you for your replies i will try them all as well as let my friend know who is coming over to try to fix my stupid lol thank you all for your suggestions.
Update - Here is the Fix
With a bit of research and lots of help from b63 I got my Kindle Fire to work again:
1. Booted into TWRP (Recovery Mode).
2. Flashed new MD5 zip (Kindle Fire Stock 6.2.2).
3. Wiped all data off the sd card except the TWRP folder and the MD5.
4. Booted the Kindle Fire and it went straight to the lockscreen.
Thanks for all your help!
Fedor
Still am sorta stuck
Ok, so I tried to flash a MIUI ICS rom using TWRP and followed the (apparently crappy) instructions here. So, I'm stuck on the TWRP logo and have used the Kindle Fire Utility to try and reset the bootmode to no avail (it does set it and it reboots but still never progresses into the actual TWRP menu.
Any ideas?!
karlhafer said:
Ok, so I tried to flash a MIUI ICS rom using TWRP and followed the (apparently crappy) instructions here. So, I'm stuck on the TWRP logo and have used the Kindle Fire Utility to try and reset the bootmode to no avail (it does set it and it reboots but still never progresses into the actual TWRP menu.
Any ideas?!
Click to expand...
Click to collapse
would try to follow this:
http://forum.xda-developers.com/showpost.php?p=22433402&postcount=4
i did finally get my kindle working again after several reboots of the pc and kindle and re installing the drivers a couple times it is now recognized. after almost a week of messing with this i have found that rooting this is alot more simple then many people are giving directions for.
what i did:
download kindlefireutility1.1
download what apps you want BEFORE you root, i have found many apps work when installed before rooting some apps may still not work..
once kindle fire utility is downloaded extract it to your c: drive
go into the kindle fire utility folder in the c drive and install the usb drivers if you need them,if not click run this will open the utility make sure you have a fresh reboot of both the kindle and pc, plug the usb cable into the kindle and pc leave it on usb mass storage mode, move any apps or files you want and press 5 to install the latest twrp MAKE A BACKUP IN TWRP BACKUP ITS EASY, DO NOT PRESS CONTINUE UNTIL KINDLE IS BACK ON THE HOME SCREEN it will say press any key a few times when using this utility.
once done you will want to install the google frame work and Go Launcher.The kindle will reboot a couple times during all this and can take up to 5 min to load so be patient.
go back into the kindle utility and then press 7 and then press #2
once this is done you can then root so hit # 3 for perm install of burrito and super user
now once those are done and you are back into the kindle home screen click on the super user icon looks like an android dude and click ok. if you dont see ok then it didnt work and try again
then click on the burrito root guy he looks like an android cop open him and if you see exit then ur good if not try again.
now your kindle should be rooted. now if you want to install a custom ROM do the same exact steps but then when it is rooted power off the kindle and press the power button once and immediately again press and hold the power button for 7 seconds until it turns orange you will then see the yellow triangle for about 2 min then it will load twrp
once in twrp go tot he folder where you saved your ROM onto your kindle, i like to copy files to the download folder..
select your rom then click on flash, you may get a couple errors but ignore them. make sure to wipe the cashe and then hit reboot and you should be good...i hope this help someone and if you need help feel free to send me a msg. im no expert but ill try
Aim rrawrimakitty