Anyone tried this kind of cable to connect USB Stick or a mouse or a keyboard to Ideos X5?
I tried it, didn't work. Although I'd have to try with a powered USB HUB...
Your roms should be supporting usb host mode
Related
if i enable usb host and vbus, and connect the nookcolor to a powered usb hub, will the nookcolor got charged from the usb hub as well??
btw, does the usb host stuff support usb lan (rj45)??
thx, want to knoe before buying the stuffs.
very slowly....
how about usb lan? does it work with nook?
It seams that the change to the MHL cable is to allow USB on Go with the same cable
http://www.gottabemobile.com/2012/06/29/galaxy-s-iii-new-mhl-connector-also-enables-usb-on-go/
Mr_Maz said:
It seams that the change to the MHL cable is to allow USB on Go with the same cable
http://www.gottabemobile.com/2012/06/29/galaxy-s-iii-new-mhl-connector-also-enables-usb-on-go/
Click to expand...
Click to collapse
I had a bunch this was the case! Thanks for confirming.
Sent from my GT-I9300 using xda app-developers app
But how would one plug a usb cable into the hdmi port?
The_Biz said:
But how would one plug a usb cable into the hdmi port?
Click to expand...
Click to collapse
there is a MHL adapter that gives you a male 11 pin micro USB to female HDMI so you can just plug a standard male to male HDMI cable from adapter to TV.
see:
Samsung Galaxy S III MHL to HDMI adapter
Does anyone know if this new adapter will work with the Galaxy Nexus, as well? Also, does it charge the phone--or at least keep it from being drained--when USB OTG is being used? I've been looking for a way to use USB OTG with a flash drive on my GN while also charging/powering the phone. USB OTG is a real power hog.
It should, but on mine it doesn't.
I've got a new MHL cable and a USB OTG cable in the hope I could plug my MHL into the SGS3, use a powered USB hub connected to the Micro USB on the MHL and then connect a keyboard and mouse into the USB hub, then connect the HDMI to the TV.
For me it doesn't work. I thought this was the whole reason they changed the MHL cable to the new type. Can anyone else confirm?
Logicalstep
can we get an update on this situation here? How
can we get MHL AND USB OTG?
My reading of the link is that the micro USB port has been repinned to provide USB on the go and not that the cable allows for this.On the mhl cable there is a female HDMI port and a micro USB ( both female) which must be used by the charger.
If the usb connection is also female type, we have to use a usb otg cable to get it work. But at the moment my phone also wont recognize any devices -.-' only mhl and nothing else.
I bought this adapter for 25 euros and want to have it working.
I also asked samsung on facebook 'bout this problem, and everything the told me:
Go support site...
very helpful.
I hope the will enable this feature in a future update.
Hello Eveyone
A friend gave an OTG cable so I could try it on my acer A500 (stock ICS), but when I connected the OTG cable to the micro usb port and then plugged an usb pen drive nothing happened, also tried with a logitech gamepad and nothing as well.
I would like to know if there is a way for my Iconia to use/recognize the OTG cable (I know it has a full size usb port and it is working ok, but I want to be able to connect more than just one device).
I have tired a 10 port powered USB Port it did not work with MOJO, I also tried a small non-powered 4 port hub that need not work... (I used the 2.0 USB port on the back of the MOJO) PLEASE ADVISE or Re-Direct me in the right direction
I bought a powered USB 3 hub from Amazon (UK) and it works fine in the USB3 port. I didn't try the USB2 port.
I have a spare Sabrent hub with switches for each plug and when I tested it on the USB 2.0 spot, it worked with my air mouse and Mojo CTRLR.
I have a wired keyboard with a built-in 2-port hub. It works with the KB plugged into the USB2 port and a mouse in one of the hub's ports.
@ajelliottjr, what ROM are you using? I still have stock 422. And, as suggested, I'd try the USB3 port.
I got this little guy from monoprice for $3.70. I have a dongle for my mouse/keyboard, the CTRLR dongle, and a powered usb hard drive plugged in and they all work perfectly.
https://www.monoprice.com/product?p_id=10066
I bought a type-c adapter for my Z1 to use OTG cable and Usb key. The key does not power on. I tried the adapter to charge the phone with a regular usb cable and it works.
Is this problem related to COS or is OTG function not supported on the Z1? Or is there a way to enable it?
Glops4 said:
I bought a type-c adapter for my Z1 to use OTG cable and Usb key. The key does not power on. I tried the adapter to charge the phone with a regular usb cable and it works.
Is this problem related to COS or is OTG function not supported on the Z1? Or is there a way to enable it?
Click to expand...
Click to collapse
I don't know if that has changed but for cm you have to use an app like StickMount to be able to mout the USB stick.
Ok thanks, I guess I have to root then.
I used only es file Explorer and it worked for me. I testet Ext hdd, mous, keyboard and controller
Same, no root required, just an usb C OTG and a file explorer. Be aware that the OTG or the device could be uncompatible...
Glops4 said:
I bought a type-c adapter for my Z1 to use OTG cable and Usb key. The key does not power on. I tried the adapter to charge the phone with a regular usb cable and it works.
Is this problem related to COS or is OTG function not supported on the Z1? Or is there a way to enable it?
Click to expand...
Click to collapse
I bought a USB-C to USB-A Converter and it works for me. Official USB type-c adapter has no support for OTG.
hfutxqd said:
I bought a USB-C to USB-A Converter and it works for me. Official USB type-c adaipter has no support for OTG.
Click to expand...
Click to collapse
This might be the proper solution, it seems.
" type-c adapter for my Z1 to use OTG cable and Usb key"
What speed did you get to ?
Lenovo Zuk Z1
I tried Xiaomi USB typeC adapter with a SanDisk micro USB memory and it doesn't work
I have the same problem.At my oneplus 2 with adapter working normal but at Z1 not working.
No solution about that ? I got 2 adapters now (noname and Victsing) but still no otg, and usb storage options are unavailable !
Does it support in twrp recovery.. i mean does otg recognising in twrp...???
Strange, it should work out of the box on COS 12.1...just received my second Zuk1 and hooked up the Z1 to my car to read out the ECU, it worked without an hitch! Did not try a USB stick though...
I have 2 cables, one is with the micro USB for which I use a micro USB to type C USB adapter, the second USB OTG cable already has already the Type C connector and connects straight up.
I never used my "charging cable" as the idea is to plug your USB stick straight onto the OTG interface cable.
i have rooted/unlocked zuk z1.
tried every possible stuff (es file explorer,stick mount, usb troubleshooting etc), tried changing the otg cable, tried changing pendrives, nothing helps.
can anyone please help me?
xda is my only hope