I know there have been a few posts on this subject but no one seems to have answered the question so far...
I tried to instal ICS but couldn't get it to work at the last hurdle so I tried to go back into AD Recovery to reinstall Gingerbread. Only when I try I get the message: Error: Error: cannot read ramdisk
UK HTC HD2 ie 512
I did a Task29
Reinstalled HSPL 2.08
Radio 2.15... (The radio is not the problem)
Reinstalled Magldr / CWM
Anyone know how to fix this?
Are you sure you installed cwm right?
Sent from my HD2 using xda premium
I've reinstalled CWM using magldr using a few different methods.
centrestu said:
I've reinstalled CWM using magldr using a few different methods.
Click to expand...
Click to collapse
That error is apearing when u dont have cwm. I have guide for RCmix3d. Try it but use your rom partition sizes. U have clk and magldr in my signature.
Thanks to everyone who helped me, I managed to get everything working again by reinstalling ClockWorkMod using the correct partition layout from here (I used a 250mb layout for Gingerbread).
After much trial and error on my behalf it's worth noting that once the problem was fixed before i could successfully get a ROM to work I had to do a factory reset and wipe the dalvik cache in magldr and delete the file structure of past roms from my SD card as it caused new installs to hang.
good news!!!!!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
I have been searching and trying to get this to work for 4 hours now.
I wanted to use this rom http://forum.xda-developers.com/showpost.php?p=6630218&postcount=6 but no luck.
I have tried to cid unlock ( didnt work) and have even tried a few others with no luck, they all give me this error.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Anyone know the solution?
thricemin said:
I have been searching and trying to get this to work for 4 hours now.
I wanted to use this rom http://forum.xda-developers.com/showpost.php?p=6630218&postcount=6 but no luck.
I have tried to cid unlock ( didnt work) and have even tried a few others with no luck, they all give me this error.
Anyone know the solution?
Click to expand...
Click to collapse
install onyx 5 and then downgrade to 4
I tried that but I am still getting the same message.
thricemin said:
I have tried to cid unlock (didnt work) and have even tried a few others with no luck, they all give me this error.
Click to expand...
Click to collapse
If the CID unlocking didn't work, and you don't have and sort of SPL protection installed (HSPL or USPL), then you won't be able to install any of the Onyx ROMs. Or any other custom cooked ROM for that matter... A list of the HTC RUU error codes can be found here if it helps.
Personally, I would recommend HSPL 2.28 from this thread, but it's up to you.
Edit: I just noticed a senior moderator gave the same advice yesterday in another thread you opened (link).
Please read stickies in the ROM dev section.
Hello have a Rogers Magic 32 A and not much success at all with an ROM update (actually have a 1.6)
Rooted it, got a while a go some Updates on it as you can see SPL, RADIO
In SDK it looks fine, its in the device manager w/o an error , Mounting the SD card is fine too
But as soon i want do anything like Fastboot, adb or run a RUU Rom file "no conection via USB, or waiting on device" Even i still can see the SD card in the explorer.
What is there wrong or what did I wrong Thanks a lot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.flickr.com/photos/[email protected]/5341092370/
http://www.flickr.com/photos/[email protected]/5341092396/
http://www.flickr.com/photos/[email protected]/5341092444/
randyrubb said:
Hello have a Rogers Magic 32 A and not much success at all with an ROM update (actually have a 1.6)
Rooted it, got a while a go some Updates on it as you can see SPL, RADIO
In SDK it looks fine, its in the device manager w/o an error , Mounting the SD card is fine too
But as soon i want do anything like Fastboot, adb or run a RUU Rom file "no conection via USB, or waiting on device" Even i still can see the SD card in the explorer.
What is there wrong or what did I wrong Thanks a lot
http://www.flickr.com/photos/[email protected]/5341092370/
http://www.flickr.com/photos/[email protected]/5341092396/
http://www.flickr.com/photos/[email protected]/5341092444/
Click to expand...
Click to collapse
Well... one problem that you're having is that you failed to post in the right section. I'll move it for you but next time I'll trash it instead. Fair warning.
Second thing is that those images aren't showing up. When I tried to click a link it says that I have to be signed in. Sorry... but I'm not planning on working that hard to help you out at this point. Too busy.
Hello everyone, I have been working on this for hours and cannot find anything that works. I successfully installed CM7 with gapps on my NookColor months ago and never had this problem. I am just trying to set up a fresh install on a new 16GB SanDisk class 6 micro SDcard. I am using the instructions found here just like I did before on my 32GB SanDisk class 6 micro SDcard. I would really appreciate any help, as this is just about the most frustrating issue I've ever encountered regarding CM7 on my NookColor.
I put the gapps-gb-20110828-signed.zip file on the first boot partition, boot to recovery and all I get is this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Try downloading the gapps again... possibly a corrupt download.
It is hard to read your very small thumbnail, but it looks like you have a space in the gapps file name after gapps and before gb. That would explain the error message. Make sure it is named with no spaces.
DizzyDen said:
Try downloading the gapps again... possibly a corrupt download.
Click to expand...
Click to collapse
It's really strange because the MD5 check passed the file I already had. You were right, I redownloaded and after that it worked. Thank you.
Sm!th said:
It's really strange because the MD5 check passed the file I already had. You were right, I redownloaded and after that it worked. Thank you.
Click to expand...
Click to collapse
When you redownloaded it, you got the name right so it would install. That is why the MD5 matched on the original file yet it would not install.
Hiii,
I have a problem rooting my HTC Panache. I am trying to do it through ROM manager and whenever i run Flash ClockworkMod Recovery it gives me an error saying.'An error occured while attempting to run privileged commands'. Somebody please HELP ME!!! as I am a new user in terms of rooting my phone.
Thanks & Regards,
Jaspal Singh Ubee
jas_nike_87 said:
Hiii,
I have a problem rooting my HTC Panache. I am trying to do it through ROM manager and whenever i run Flash ClockworkMod Recovery it gives me an error saying.'An error occured while attempting to run privileged commands'. Somebody please HELP ME!!! as I am a new user in terms of rooting my phone.
Thanks & Regards,
Jaspal Singh Ubee
Click to expand...
Click to collapse
Have you done the downgrade method, gotten soff and achieved permaroot?
Sent from my MyTouch 4G using xda app-developers app
THEindian said:
Have you done the downgrade method, gotten soff and achieved permaroot?
Click to expand...
Click to collapse
Of course he hasn't. It's so much easier to open a new thread than to write "htc panache root xda" in Google and read the 2 top hits (and first pages will be enough). Or is it?
OP, find and read a thread named "Videotron/Mobilicity Panache thread".
Search in Google as "Install CM for Glacier". This is an easy solution for Perm-Root your HTC Panache.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my HTC Panache
i have install android (NexusHD2) on my phone htc hd2 but the phone stuck on this logo
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ihave hspl 2.08 rom radio Radio Leo 2.15.50.14
and after 3 time of reinstallation i give up
i want go back to the oroginal rom 6.5 but how?
i have officiel rom RUU_Leo_S_HTC_FRA_3.14.406.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
its safe to launch directly ROMUpdateUtility or i need to floo another step
thank you
Wrong partition size. Increase the Partition on Nand, minimum 50MB, and install Android again, it should boot.
BTW, the first boor is very long, even more than 15 minutes, leave the phone to do his job first.
i have repartition the nanad with 400MB
but now i have another problem when i want to go back to the original rom with sd metod (leoimg .nbh in the rot of sd card)
i have this 2 message
in bootloader screen
Upgrade Rom code error please try again
Before any installation you have to formatt your HD2 with Task29, before Stock or Android.
You cannot flash Stock from SD. To go back to Stock you have to boot in Bootloader, connect to PC and run the installation from the folder RUU.
About Android, try different Rom, it seems like the package is compromise. Sometime not all the Roms are perfect but it's very easy to install them on HD2.
Somewhere you do a mistake.
yes i hve do task29 and step of installation
i hve test 5 android roms ..seme problem stuck on logo
Stuck on logo
I have the same problem.
With 5 differents Android ROM the system stucks when it connect to the GSM provider.
I hace installed the latest ROM radio.