hi guys again,
finally flashed recovery but I got a problem now.
As I flashed sappimg.nbh from here my phone is not Magic 32A(with 3.22 radio) anymore, its Mytouch3G S-ON with radio 2.22.19.26I and 1.33.0006 spl.
How to upgrade to 3.22(or 6.35) and spl to 1.33.2010(or 1.76.xxxx)?
cant find nothing about this
or maybe how to revert to normal magic?
Dude, stop experiments with your Magic now)) You posted a lot of text and got a lot of problems)))
Please post FULL SPL-info. All symbols are important! Absolutely...
Related
So I've figured out that I've got the myTouch 1.2 (because I have the 3.5mm jack) and I'm currently running a ported version of SuperD 1.10.3 which is awesome. The issue I have is that I want to replace my splash screen, however, the only success I've had in getting my phone rooted and a custom ROM loaded was to load up a rooted SPL, flash AmonRA's 1.7.0G recovery, and then reflash my radio/SPL back to the original state. So, I don't want to have to load up one of the rooted SPL's and then go back every time I want to use ADB via Fastboot. What I was wondering is if there's any 32A SPL's with the 2.22 radio so that I wouldn't have to go back to the locked (perfected) SPL. Here's what I've got
FASTBOOT Specs:
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
RADIO - 2.22.23.02
DonJuan692006 said:
So I've figured out that I've got the myTouch 1.2 (because I have the 3.5mm jack) and I'm currently running a ported version of SuperD 1.10.3 which is awesome. The issue I have is that I want to replace my splash screen, however, the only success I've had in getting my phone rooted and a custom ROM loaded was to load up a rooted SPL, flash AmonRA's 1.7.0G recovery, and then reflash my radio/SPL back to the original state. So, I don't want to have to load up one of the rooted SPL's and then go back every time I want to use ADB via Fastboot. What I was wondering is if there's any 32A SPL's with the 2.22 radio so that I wouldn't have to go back to the locked (perfected) SPL. Here's what I've got
FASTBOOT Specs:
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
RADIO - 2.22.23.02
Click to expand...
Click to collapse
This is the wrong section. Should be in General (unless you're releasing a new engineering spl)
You need to use an engineering spl to modify your splash screen, flash the new splash screen, then flash your stock spl back. You might be able to continue to use the other engineering spl (1.33.2010) but you will lose half of your ram, headphone jack, etc.
Here's the engineering spl
Here is the stock spl
Alright, that's what I had been doing but wasn't sure if maybe there had been an engineering SPL put out that I could continuously use. The issue I've had is that whenever I load the engineering SPL, do whatever I need to, then go back to the original SPL, I can no longer boot into recovery. I end up having to reload the engineering SPL, flashing over the hboot and radio, and reflashing my recovery on. Is that right or is there an easier way.
About the wrong section, I though about that a few minutes ago, sorry for posting in the wrong one. I'll remember that for next time.
What I've been able to do is just flash the 2010 Engineering SPL, flash my new splash screen, then revert back to the normal SPL and everything works from there.
C0dy said:
What I've been able to do is just flash the 2010 Engineering SPL, flash my new splash screen, then revert back to the normal SPL and everything works from there.
Click to expand...
Click to collapse
Yeah, that's pretty much what I said.
@Binary100100
How do I Flash ENG SPL and Flash back the Stock SPL? Is there a guide?
Also, how do I back up my own Stock SPL?
(wondering the one provided stock spl is the 1.33.0013)
thnx in advance.!
ekoandrew said:
@Binary100100
How do I Flash ENG SPL and Flash back the Stock SPL? Is there a guide?
Also, how do I back up my own Stock SPL?
(wondering the one provided stock spl is the 1.33.0013)
thnx in advance.!
Click to expand...
Click to collapse
If you've got the myTouch 1.2 (with the 3.5mm jack) then you can use this guide following steps 1-8. What are you trying to do it for?
DonJuan692006 said:
If you've got the myTouch 1.2 (with the 3.5mm jack) then you can use this guide following steps 1-8. What are you trying to do it for?
Click to expand...
Click to collapse
I want to Flash the FAT GREEN T-Mobile Splash screen into something else.
wow, thnx for the guide. but I need to make a GoldCard? is the the only way to flash the SPL? and flash it back?
Binary100100 posted the ENG SPL, and original SPL. What I am wondering is, what spl version is the original?
Can I just zip up the Original SPL, and rename it update.zip. and Flash it.
Will this work?
The original SPL will include the stock recovery which you don't want. That's why only the radio and bootloader are in that guide to be flashed back.
Sent from my T-Mobile MyTouch 3G using XDA App
I am having a problem with my mytouch fender.
I tried to flash to radio 6.35.16.19 to run the newer roms, really wanted to try smoki's rom and rc magic's v2 and now i'm stuck.
I can fastboot, flash hboot and recoveries but when I tried to flash a different radio it hangs at 95%, doesn't matter if i'm flashing radio through fastboot, trying to get back to stock with sappimg.zip it always hangs at 95% on step 5 radio v2. I also can not boot into recovery no which recovery I try - amon ra's or clock work.
I have search all over and can't find any help. I think I have the same problem as the person from this thread
forum.xda-developers.com/showthread.php?t=712934&page=5
I hope I didn't brick it.
Was wondering if the fix from this thread would work for me
xda-developers.com/showthread.php?t=753972&page=2
The link to fix is no longer there however for me to try.
Any advice or help would be great. Thanks.
sapphire unknown 32a eng s-off h
hboot-1.33.2010 (sapp310000)
cpld-13
radio-6.35.16.19
Sorry for deleting the fix... did not think anybody is gona need that... it was made spcially for the guy in the thread.
Let's see if we can fix your device.
Since you connot flash radio... then try to flash spl...
The problem is you have the wrong spl/radio combo...
You need the 1.76.2007 spl with that radio..
I dont know if this is going to work or not.. But if it was my device, then i will try it :0)
Download the tool i made for eyegor from my signature (radioswither).
Put phone into fastboot.
Check connection.
If you see the the device nr you are good to go.
Now flash the 1.76.2007 spl. Only the spl. Find it under the imgfiles folder.
Then reboot using the tool into fastboot again.
You device should have a diff spl. the 1.76 spl.
Now push "flash old".
This should set you back to 32A mode.
Flash any 32A/3.22 radio rom you like...
Like this one:
http://forum.xda-developers.com/showthread.php?t=723520
Finally flash stock fender spl or your device is working with half the ram!
There are more info in the thread you referred to... read it all... It's important you understand the device you have!
mumilover said:
Sorry for deleting the fix... did not think anybody is gona need that... it was made spcially for the guy in the thread.
Let's see if we can fix your device.
Since you connot flash radio... then try to flash spl...
The problem is you have the wrong spl/radio combo...
You need the 1.76.2007 spl with that radio..
I dont know if this is going to work or not.. But if it was my device, then i will try it :0)
Download the tool i made for eyegor from my signature (radioswither).
Put phone into fastboot.
Check connection.
If you see the the device nr you are good to go.
Now flash the 1.76.2007 spl. Only the spl. Find it under the imgfiles folder.
Then reboot using the tool into fastboot again.
You device should have a diff spl. the 1.76 spl.
Now push "flash old".
This should set you back to 32A mode.
Flash any 32A/3.22 radio rom you like...
Like this one:
Finally flash stock fender spl or your device is working with half the ram!
There are more info in the thread you referred to... read it all... It's important you understand the device you have!
Click to expand...
Click to collapse
Thanks so much. I did what you said and flashed 1.76.2007 spl and was able to flash old and get rid of the evil 6.35 radio. I can now use my goldcard and get things back to normal. Thanks so much. I was already searching ebay for a new phone. Thanks again.
Glad i could help :0)
Next time READ, READ, THINK, READ, THINK then do it!
Evil radio don't kill devices, people kill devices :0)
Hello everyone.
I used search but couldn't find it. Probably because search doesn't take under consideration 3letter words like "new", "old" and "spl".
I'm running:
sapphire pvt 32a eng s-off h
hboot-1.76.2007 (sapp10000)
cpld-12
radio-6.35.08.29
aug 21 2009, 18:19:15
1.6.2 AmonRA recovery.
Can I revert to old Radio and keep new SPL?
What should be the order of downgrade? Radio first and SPL later or the other way around?
Should I maybe downgrade them together and later upgrade SPL back to 1.76?
Any pros/cons of running old radio and new SPL? Is custom recovery a game changer in this process? Should I go back to stock recovery?
Thanks for your help. Cheers.
NO.. the spl and radio is a combo and cannot be interchanged.
Download my fastboot commander tool (magic version, check my signature) and it will do it for you the easy way :0)
And what if i saw in someones signature 3.22 radio and 1.76 spl ? just an error or a possibility?
Ask that someone...
But highly a mistake!
mumilover said:
NO.. the spl and radio is a combo and cannot be interchanged.
Download my fastboot commander tool (magic version, check my signature) and it will do it for you the easy way :0)
Click to expand...
Click to collapse
Does recovery version has to be old too? Or can i just keep the new one?
You have to change your recovery too, because switching the radio alters your phones partitioning scheme, thus making the recovery crash.
keinengel said:
You have to change your recovery too, because switching the radio alters your phones partitioning scheme, thus making the recovery crash.
Click to expand...
Click to collapse
thanks for the info. will do as told.
So the phone is a 32a magic/mytouch 1.2
The set up was hboot 1.33.0013d
radio 2.22.28.25
So I tried to upgrade rom and decided to flash the radio 6.35.16.19 ....found a flashable zip....and proceed. Its seemed to work but got stuck on the Mytouch screen
CAN'T access either bootloader or recovery!
Does that mean the phone is officially over?
I will appreciate all the replies thank you
Heres my issue...
No rom or recovery rom that works
yes bootslpash screen
yes fastboot with security
I need a solution that involves
a funtional rom
ability to flash to funtionality
I have researched and troubleshooted this problem extensively; to no avail! Even though I should have already, I will donate 20$ for attention and 30$ for solution.
Thankyou
Sapphire pvt 32a ship s-on H
hboot-1.76.0008 (sapp31000)
cpld-13
radio-6.35.08.29
nov 2 2009
-- main version 3.05.631.7
**originally mytouch 3g FENDER edition w/cyan; custom recovery; and originial SPL
You need a few things.
1. goldcard
2. A sappimg.zip with a higher version than what you have with an Eng spl. (Preferably for 32b)
3. Time, patience
4. Luck
All of these are easy to find or get besides time, patience, and luck
Im currently looking for sappimg.zip that contains the required criteria. I will post after flash attempt...
thank you
forgot to mention
I forgot to mention a common occurance since I lost custom recovery and custom rooted rom, ect.
the "goldcard-sappimg-flash" process freezes or hangs at [4] SYSTEM during the unzipping portion
As you have MT3G v1.2 / Fender - it is too hard to restore your phone after your faulty actions. You bricked your phone, when flashed inappropriate hboot and radio
Try this: http://forum.xda-developers.com/showpost.php?p=15666482&postcount=2
p.s. All credits to mumilover, if it would help...
5[Strogino] said:
As you have MT3G v1.2 / Fender - it is too hard to restore your phone after your faulty actions. You bricked your phone, when flashed inappropriate hboot and radio
Try this: http://forum.xda-developers.com/showpost.php?p=15666482&postcount=2
p.s. All credits to mumilover, if it would help...
Click to expand...
Click to collapse
That post seems to be talking about mismatched radio and spl. His match, but are the wrong ones. He should be able to flash a sappimg.zip to get an Eng spl and fix from there
Ironically, the thread you have suggested is the first thread I followed to configure my device for the "carz" latest custom rom.
Is there a way around the "unzipping hang" that happens during system partition portion of RUU_Sapphire_Rogers_WWE_3.05.631.7_R_release_signed_NoDriver flash? I have also tried the goldcard method with extracted rom.zip of the mentioned RUU rom with same result.
tvall said:
That post seems to be talking about mismatched radio and spl. His match, but are the wrong ones. He should be able to flash a sappimg.zip to get an Eng spl and fix from there
Click to expand...
Click to collapse
Yeah, but solution is same. Sure, he can start from step 2, cause he has combo without mismatch between hboot and radio already.
And yes, should flash 2.53.707.2 to get special combo with eng spl and then return to stock.
Sent from my A7-040 using Tapatalk
brandnew2009 said:
Heres my issue...
No rom or recovery rom that works
yes bootslpash screen
yes fastboot with security
I need a solution that involves
a funtional rom
ability to flash to funtionality
I have researched and troubleshooted this problem extensively; to no avail! Even though I should have already, I will donate 20$ for attention and 30$ for solution.
Thankyou
Sapphire pvt 32a ship s-on H
hboot-1.76.0008 (sapp31000)
cpld-13
radio-6.35.08.29
nov 2 2009
-- main version 3.05.631.7
**originally mytouch 3g FENDER edition w/cyan; custom recovery; and originial SPL
Click to expand...
Click to collapse
I was having problems rooting my Rogers HTC Magic+. I used this method and it worked like a charm to get root, Eng SPL. After that I was able to flash custom recovery and ROMS.
The ROM in my Signature works really well.
Flash the original "RRU", then root with androot.apk from market, install rommanager from market and flash recovery, reboot recovery and flash the ENG spl
solved your problem yet? maybe i may help.
no... i have not solved my problem yet your help would be greatly appreciated