This is the official CM9 port for the P7300 and the P7310.
EXPERIMENTAL BUILDS 2012-09-03
These builds uses the Linux 3.1.10 kernel and the libs from the official P7310 ICS firmware (the P7300 has borrowed the RIL lib from the official P7500 firmware).
Known issues is some graphics glitches in landscape modes that sometimes appear and that running Google Maps makes Android restart after ~1 minutes use (There's something with the compass sensor driver that goes berserk). And yes, both cameras works.
Important: First install Clockwork 6.0.1.2 in the second post if this thread. If you use the old Clockwork you will get a black screen on the first boot and you will need to do a long press on power to get it running again.
EDIT 2012-09-05 - Do not use Clockwork 6.0.1.2, possible risk of bricking (not sure yet if permanent or if it can be fixed). Using old recovery works with the new builds but you will need to do a long press to get the display working after each time you have booted into recovery.
P7300: http://www.mediafire.com/?wft75e9zvu7e37o (untested)
P7310: http://www.mediafire.com/?ina1yc739svpq3b
Instructions
Be aware that everything you do is on your own risk!
Make sure you know your way around in Clockwork recovery.
BACKUP your old install
Install CM9, then install Google apps. Do not forget to wipe.
Downloads P7300 (wifi+3g)
2012-06-18 and later we have official nightlies. Go here to get them: http://get.cm/?device=p5
2012-06-16 cm-9-20120616-UNOFFICIAL-p5.zip
2012-06-08 cm-9-20120608-UNOFFICIAL-p5.zip
2012-05-17 update-cm-9.0.0-RC0-p5-UNOFFICIAL-signed-20120517.zip
2012-05-11 update-cm-9.0.0-RC0-p5-UNOFFICIAL-signed-20120511.zip
2012-03-30 update-cm-9.0.0-RC0-p5-KANG-signed-20120330.zip
2012-03-08 update-cm-9.0.0-RC0-p5-KANG-signed-20120308.zip
2012-03-04 update-cm-9.0.0-RC0-p5-KANG-signed-20120304.zip
2012-03-02 update-cm-9.0.0-RC0-p5-KANG-signed-20120302.zip
2012-02-27 update-cm-9.0.0-RC0-p5-KANG-signed-20120227.zip
2012-02-10 update-cm-9.0.0-RC0-GT-P7300-KANG-signed-20120210.zip
2012-02-08 update-cm-9.0.0-RC0-GT-P7300-KANG-signed-20120208.zip
2012-02-03 - update-cm-9.0.0-RC0-p5-KANG-signed-20120203.zip
2012-01-30 - update-cm-9.0.0-RC0-p5-KANG-signed-20120130b.zip
2012-01-27 - update-cm-9.0.0-RC0-p5-KANG-signed-20120127.zip
2012-01-26 - update-cm-9.0.0-RC0-p5-KANG-signed-20120126.zip
2012-01-24 - update-cm-9.0.0-RC0-p5-KANG-signed-20120124.zip
2012-01-23b - update-cm-9.0.0-RC0-p5-KANG-signed-20120123b.zip
Downloads P7310 (wifi only)
2012-06-18 and later we have official nightlies. Go here to get them: http://get.cm/?device=p5wifi
2012-06-16 cm-9-20120616-UNOFFICIAL-p5wifi.zip
2012-06-08 cm-9-20120608-UNOFFICIAL-p5wifi.zip
2012-05-17 update-cm-9.0.0-RC0-p5wifi-UNOFFICIAL-signed-20120517.zip
2012-05-11 update-cm-9.0.0-RC0-p5wifi-UNOFFICIAL-signed-20120511.zip
2012-03-30 update-cm-9.0.0-RC0-p5wifi-KANG-signed-20120330.zip
2012-03-08 update-cm-9.0.0-RC0-p5wifi-KANG-signed-20120308.zip
2012-03-04 update-cm-9.0.0-RC0-p5wifi-KANG-signed-20120304.zip
2012-03-02 update-cm-9.0.0-RC0-p5wifi-KANG-signed-20120302.zip
2012-02-27 update-cm-9.0.0-RC0-p5wifi-KANG-signed-20120227.zip
2012-02-10 update-cm-9.0.0-RC0-GT-P7310-KANG-signed-20120210.zip
2012-02-08 update-cm-9.0.0-RC0-GT-P7310-KANG-signed-20120210.zip
2012-02-03 - update-cm-9.0.0-RC0-p5wifi-KANG-signed-20120203.zip
2012-01-30 - update-cm-9.0.0-RC0-p5wifi-KANG-signed-20120130b.zip
2012-01-27 - update-cm-9.0.0-RC0-p5wifi-KANG-signed-20120127.zip
2012-01-26 - update-cm-9.0.0-RC0-p5wifi-KANG-signed-20120126.zip
2012-01-24 - update-cm-9.0.0-RC0-p5wifi-KANG-signed-20120124.zip
2012-01-23b - update-cm-9.0.0-RC0-p5wifi-KANG-signed-20120123b.zip
2012-01-23 - update-cm-9.0.0-RC0-p5wifi-KANG-signed-20120123.zip
2012-01-11 - update-cm-9.0.0-RC0-p5wifi-KANG-signed-20110111.zip
2012-01-09 - update-cm-9.0.0-RC0-p5wifi-KANG-signed-20110109.zip
Google apps for CM9 can be found here: http://goo-inside.me/gapps (Upgrading from an erlier Google apps may require a wipe to get everything working)
Changelog
2012-03-02 - We're official! But I'll keep uploading "nightlies" here until the buildbot starts spitting out new builds automaticly. However for changelog I recommend keeping and eye on what get's merged here: http://review.cyanogenmod.com/#q,status:merged,n,z
2012-02-27 - Freshly synced against CM repo.
2012-02-10 - Soft keyboard is now always enabled.
2012-02-08 - Changed PRODUCT_RELEASE_NAME to GT-P7300/GT-P7310. Synced source with CM9 where the required patches for 3G and KSM now has been merged.
2012-02-03 - Fixed battery stats (thanks motley) and also added KSM support.
2012-01-30 - Touchscreen driver rewritten to use multitouch slots which I believe is the new standard in ICS. Seems to work a lot better than the old method.
2012-01-27 - Updated 3G fix (airplane mode is supposed to be fixed). Added bluetooth toggle in notification area + wifi toggle.
2012-01-26 - Added undervolting and more overclocking frequencies (stolen from Motleys kernel). Fixed screenshot feature.
2012-01-24 - Both: Some improvements to Torch (no longer flicker, added bright mode to kernel, quick and dirty fix to widget size) and also fixed the battery indicator in low power mode (charging when off) P7310: Removed signal strength bars
2012-01-23b - Enabled CIFS, NTFS and TUN in kernel. Replaced sensors.p3.so with P7300 version.
2012-01-23 - Youtube HD now works. New proprietary libs from pershoots repo. Also modified pershoots P75xx kernel to work with P73xx so it is no longer using Motleys kernel (although several files was kanged from Motleys kernel to make pershoots kernel work on our devices). Now uses bootanimation.zip from Xoom ICS release (looks pretty much the same as before). CIFS, TUN and NTFS is not included in this release but will be added in the next one.
2012-01-11 - Resynced source, tweaked autobrightness, added Torch from CM7 (untested since my camera LED is broken)
2012-01-09 - Initial release
Known issues
Camera is not working.
Compass is 90 degrees wrong.
Rotation animation "blanks out" before it starts.
Voice calls (P7300 version) isn't working although some report recieving calls work while outgoing calls is a not.
HDMI output is rotated 90 degrees.
Sources
CyanogenMod9 source - https://github.com/CyanogenMod/
Kernel source: https://github.com/kalltkaffe/galaxy-2636
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Clockwork Recovery 6.0.0.8 - 2012-07-23 / 2012-07-25
Clockwork Recovery 6.0.1.2 - 2012-09-03
Downloads
Clockwork_Recovery_6.0.1.2_GT-P7300.zip
Clockwork_Recovery_6.0.1.2_GT-P7310.zip
EDIT 2012-09-05 - Links removed for now. Got stuck on formatting /cache and since then I'm APX bricked. Hopefully my tablet will recover after battery drain. At least one other user have ended up with the same problem. Not sure if it is something with the new kernel or just a coincidence but I recommend to reflash 6.0.0.8 for now.
Clockwork Recovery 6.0.0.8 - 2012-07-23 / 2012-07-25 (alternate)
Downloads
Clockwork_Recovery_6.0.0.8_GT-P7300.zip
Clockwork_Recovery_6.0.0.8_GT-P7300_alternate.zip
Clockwork_Recovery_6.0.0.8_GT-P7310.zip
Clockwork_Recovery_6.0.0.8_GT-P7310_alternate.zip
Use alternate version if you have display problems with the normal versions. The alternate versions uses an older kernel that works better on some devices.
Instructions
Everything is done at your own risk.
Flash from either stock recovery or another Clockwork recovery.
Thats great to see
Camera works?
Definitely the smoothest experience I've had on this tab; having tried Stock, Overcome and ICS Alpha 2.
Edit:
Camera and Video playback (Youtube, YouTubeHD, Netflix I'm assuming) are of course a no-no still at the moment.
SD Card Video playback has been no problem for me, save for a bit of stuttering on high profile MKV's, but that's the same on every rom.
Streaming Icefilms worked flawlessly, which leaves me happy.
All I want, a fix for the strange half a second Rotation stretching, HD video playback fixed, and ma camera! This would be the perfect rom.
The currently running widgets thing has the app photos rotated 90 degrees, and the screen streches for half a second when rotating.
Otherwise, I'm very happy to see that my tablet is capable of attaining speeds like. Absolutely flawless; what I would give to have a complete ICS rom. xD
Great to see another ICS pop up. I was getting random freezes with Alpha2 as well...I'm assuming its probably related to the kernel?
Sent from my Galaxy Nexus using Tapatalk
One annoyance however; no Market comes with the stock flash, and neither does a file explorer apparently. -___-
EDIT: Finally managed to get market installed, and it insta closes on start. =[
And then I realized its because I failed to remember to flash the Google Apps. -____- haha
Cool Race
Hi, presumably the reace between Alpha 2 team and CyanogenMod9 team is on...
will be interesting to see (and feel) the results once they become Beta...
Looking forward for the result of both teams !
Regards
Erik
P-7300
rosdol said:
Hi, presumably the reace between Alpha 2 team and CyanogenMod9 team is on...
Click to expand...
Click to collapse
I have no intention to start any competition. We both have the same goal, a stable and fully functional ICS for the Galaxy 8.9, and I believe sharing thoughts and ideas is the best way to achieve that goal.
And btw, I'm not a team, and while I am responsible for another CyanogenMod port (ZTE V9) this is not by any way yet an official CM9 port. Maybe it will be one day, maybe it won't.
kallt_kaffe said:
I have no intention to start any competition. We both have the same goal, a stable and fully functional ICS for the Galaxy 8.9, and I believe sharing thoughts and ideas is the best way to achieve that goal.
And btw, I'm not a team, and while I am responsible for another CyanogenMod port (ZTE V9) this is not by any way yet an official CM9 port. Maybe it will be one day, maybe it won't.
Click to expand...
Click to collapse
Adding to that the fact that this is, as the title says, based in CM9 whereas Galaxian Soup's ICS is no longer based in CM9, just AOSP. Both stances are great. The more the merrier I say! This community needs more ideas, more development and talented people like you, alterbridge86 and Team Galaxian Soup. For this, I thank you.
great rom.I like this rom(maybe batter than galaxy soup alpha2).It is smooth as other roms and fixed the auto bright level on the galaxy soup(it's important to me).thanks the good work.
This ROM is run is running real well for me....looking forward to future updates.
Sent from my GT-P7310 using Tapatalk
Thank you for an excellent alternative of the ICS.
Sent from my P7300 on CM9 Alpha1
New version in first post. Not much to be excited about though.
ehcan said:
Thank you for an excellent alternative of the ICS.
Sent from my P7300 on CM9 Alpha1
Click to expand...
Click to collapse
@ehcan
see your device is 7300
3g data work?
No voice functions
When this ROM gets the voice functions working, I'll try it again. Until then, I'm going back to Galaxian Alpha 2 where it all works perfectly.
Glenn
weltwon said:
When this ROM gets the voice functions working, I'll try it again. Until then, I'm going back to Galaxian Alpha 2 where it all works perfectly.
Click to expand...
Click to collapse
Have you tried their Gapps package? I believe that is what adds voice functionality.
chriscsh said:
@ehcan
see your device is 7300
3g data work?
Click to expand...
Click to collapse
No, the current kernel only supports wifi.
Sent from my GT-P7300
ehcan said:
No, the current kernel only supports wifi.
Sent from my GT-P7300
Click to expand...
Click to collapse
Actually we already have a kernel that supports 3G and has the needed ICS fixes, but it doesn't help, the CM9 ICS build has data disabled.
We (Galaxian-Soup) are working on making a ICS build that has data enabled.
poisike said:
Actually we already have a kernel that supports 3G and has the needed ICS fixes, but it doesn't help, the CM9 ICS build has data disabled.
We (Galaxian-Soup) are working on making a ICS build that has data enabled.
Click to expand...
Click to collapse
Here's a totatally untested P7300 version: update-cm-9.0.0-RC0-p5-KANG-signed-20120112.zip
May or may not work. Kernel compiled for P7300 and based on pershoots P7500 repo. Used the same proprietary files as in the P7310 version except for the ril lib.
Source: https://github.com/kalltkaffe/android_device_samsung_p5
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Komin http://code.google.com/p/teamkomin/people/list
Team Komin presents
This is released as a full sane build only.
Download Andromeda3
mirror:http://teamkomin.googlecode.com/files/Andromeda3.zip
Remix Andromeda3 at UOT Kitchen
http://uot.dakra.lt/kitchen/
UOT Kitchen provides the ability to make your own custom release of Andromeda3.
Introduction:
In the beginning there was the work. In that work is Andromeda, and in Andromeda is the work. We've released Andromeda 1.0/2.0, 1.1/2.1, and 1.2/2.2. This is Andromeda3. Andromeda3 is the result of countless hours of development. Andromeda3 is the single Clockwork Mod flash-able ROM you should keep at all times in your phone's downloads folder. It just works.
This ROM contains the fastest kernel, the best combination of software, and it delivers outstanding battery life. Because of this, we feel it sets the standard which all ROMs should strive to attain.
For maximum battery life, disable “Auto adjustment of brightness” and “Auto rotation” under settings for the battery experience you've always wanted. These are classy and useful, but thanks to Samsung's driver, they can eat up to 25% of your processor at idle under certain conditions.
Release Notes:
You can see the release notes here: http://code.google.com/p/teamkomin/updates/list
There's 4 pages of release notes, so here's a short list of features:
Issues addressed and fixed:
Call volume Low
Swype Keyboard expired
Missing debug symbols
Samsung handwriting keyboard
BLN Control inop
Camera inop
Geotagging enabled by default on camera
Samsung 3x4 keyboard
App crash: Note-to-self crashes
App crash: Better Keyboard 8
Miscellaneous links missing
LoopFS Support
and many others...
Security Exploit
An exploit discovered post-release requires this patch http://forum.xda-developers.com/showthread.php?t=1013385
I'd like to remind users that Android 2.3 is on the horizon near the end of the month and we will not be releasing an updated version as Samsung has reported 2.3 will be available by 1June2011
New In the ROM:
Quicker GPS Lock
TKTouchWiz (Team Komin's Touch-wizard interface modified for experience)
TKBackgrounds (Team Komin's backgrounds, dark fractals and carbon fiber)
Faster HSDPA/HSUPA (the H logo means you can get nearly double Internet speeds over 3G)
Swype (will not expire)
Camera (GPS is optional, power button takes picture-GizmoDroid )
SGSTools (now with options to install new roms including Andromeda)
New Ring-tones/Alarms/UI(sound options from AOSP and AT&T)
Fully updated 2.2 core apps (as of today)
BASH - Bourne Again SHell for terminal access - run "bash" from the terminal
TCPDump - for wireless packet sniffing. Get an app called "shark native" from the market to see what your phone is transmitting/receiving.
Bluetooth Printing
Miscellaneous UI and sound level Tweaks for a better user experience
Updates and Maintained features:
Mobile Access Point (use your phone as a router for your laptop)
clockworkmod
Root/superuser permissions
Busybox
8 option power menu
Super add blocking hosts
install any app without sideloading
5 lock-screens
TKVoodoo control (Team Komin's Voodoo control app)
Kernel support UI (Back-light Notification and Voodoo Sound)
MTM Gingerbread Keyboard wp7
Titanium Backup
Simi Clock
BLN Control
BattStatt
TAJM
Stock Apps Included:
Allshare
contacts
calculator
gmail
google search
latitude
calendar
clock
navigation
google sky map
task manager
Samsung Apps
maps
messaging
facebook
gallery
memo
market
my files
places
voice recorder
video player
talk
voice search
youtube
Car Home
AppWidgetPicker
Spare Parts
New On the Kernel side
Optimized battery life
Optimized Scaling Speed when you need it
FUGU Tweaks
Voodoo Lag-fix
Voodoo Sound 6
Better Linux support for your Android with no sacrifices to speed or battery.
Recovery mode features
Advanced: Wipe Battery stats, Wipe dalvik cache, report errors, key test, partition sdcard, fix permissions, restart android debugger, Reboot to download mode
Voodoo: Enable/Disable lagfix for /system and other partitions, voodoo debug messages on/off.
Apply sdcard update.zip, wipe data/factory reset, wipe cache partition, install zip from sdcard
Backup/Restore: Nandroid Backup/Restore/Advanced restore
Mounts: Mount USB Storage to computer, Various mounting/unmounting/formatting options
I'll let mxracer101 explain all of the rest and how it works
Latest Nightly builds:
http://files.teamkomin.com/Andromeda/nightly/ and http://files.teamkomin.com/Andromeda/nightlies/
Originally, our Nighties were hosted on Google code. We ran out of space on the SVN and re-hosted on our Team Komin server. The SVN revision were reset to 0 as a result of clearing out all data. No data loss occurred, only nightly builds were affected. Anyway, the latest nightly build is always symlinked here: http://files.teamkomin.com/Andromeda/AndromedaNightly.zip
Here is a full list of Andromeda3 bug fixes:http://code.google.com/p/teamkomin/...+Priority+Milestone+Owner+Summary&cells=tiles
Thanks
Special thanks to the following (in no specific order):
Modem testing and verification - perosredo
Development, Packaging, Testing, and Verification - Team Komin
An extra special thanks to our unsung hero mxracer101. The kernel is the most important and unnoticed part of any ROM. The kernel is the pillar which the android layer stands upon. mxracer101 has developed the i9010 kernel for our phones which provides indisputable performance gains over stock, all previous build and provides compatibility with nearly everything... Like running Ubuntu 10.10. This is all done by building specific parts of the kernel as modules which are loaded when required rather then delete them or bog down the kernel by building them into it.
Thanks to nbs11 for this promo video based on 2.0
http://www.youtube.com/watch?v=bDey0XVhwvA
Links
Andromeda Q&A:http://forum.xda-developers.com/showthread.php?t=962276
Downloads:http://files.teamkomin.com/
Google Developer Site(packaging and development): http://code.google.com/p/teamkomin/
GIT Development Site (Kernel):https://github.com/TeamKomin
People of Team Komin: http://code.google.com/p/teamkomin/people/list
Speak to a developer, Live Technical Support: http://webchat.freenode.net/?channels=#teamkomin
Video on how to flash
See this thread for more information on flashing: http://forum.xda-developers.com/showthread.php?p=12476779#post12476779
Official Signature:
<---Insert Awesome Here
Code:
[URL="http://teamkomin.googlecode.com"]
[IMG]http://i55.tinypic.com/16otpf.png
<---Insert Awesome Here
Click to expand...
Click to collapse
This is released as a full sane build only.
Download Andromeda3
mirror:http://teamkomin.googlecode.com/files/Andromeda3.zip
You can obtain our ursa minor #2 kernel here
Download ursa minor #2
mirror:http://teamkomin.googlecode.com/files/UrsaMinor.zip
Our builds work like stock, only better.
Contributions and Themes:
MattedBlues ported by timbrendelaz
http://forum.xda-developers.com/showthread.php?t=1055648
Animation Mod by DAGr8
http://forum.xda-developers.com/showpost.php?p=15275661&postcount=1015
http://www.filesonic.com/file/1347304144/UNTHEMED_UIanim_RC1a_cwm.zip
See DAGr8's post here http://forum.xda-developers.com/showpost.php?p=12334836&postcount=6
and others.... http://forum.xda-developers.com/showthread.php?t=1035632
reserved 10char
-----EDIT-----
Speed is everything
Here's to changelogs
This post will be useful in the future, but right now is just me babbling on
Yes, there is a duck on my face
Taken
10.. a nevermind...
Kernel Info
I'll reserve one for fun
What's in UrsaMinor kernel?
Boosted in call volume
Applied hardcore's mic bias tweaks
Wifi and Camera drivers ported from JPX
Jhash updated to jhash3
Lowmemorykiller upgraded for TinyRCU compatability from http://android.git.kernel.org/?p=ker...3cbfcb015577a9
ext4 patched and upgraded from http://www2.kernel.org/pub/linux/ker.../ext4-patches/
Kernel hz set to 100
Tiny RCU patched and upgraded from http://android.git.kernel.org/?p=ker...90160a18caf95d
Supercurio's voodoo lagfix
Supercurio's voodoo sound v7
Supercurio's voodoo color and sharpness fix
Neldar's backlighnotification 2.3 built in from https://github.com/project-voodoo/ba...ernel_patches/
Compiled using codesourcery 2010.09.51 tool chain which should be faster and more battery efficient
Android_Logger (Logcat) disabled by default - enable via adding an empty file on the internal sd card named enable_debug
TUN support for VPN
CWM v2.5.1.3 (from voodoo lagfix)
Optimized compiler flags: -O2 -mcpu=cortex-a8 -mfpu=neon -mfloat-abi=softfp
10 point multi touch support
enabled CONFIG_OABI_COMPAT for fugu tweaks compatability
3 pole headset call support
Memory configs:
CONFIG_ANDROID_PMEM_MEMSIZE_PMEM=2048
CONFIG_ANDROID_PMEM_MEMSIZE_PMEM_GPU1=4096
CONFIG_ANDROID_PMEM_MEMSIZE_PMEM_ADSP=1500
CONFIG_WLAN_SAMSUNG_MEMSIZE_BCM=256
CONFIG_VIDEO_SAMSUNG_MEMSIZE_FIMC0=12288
CONFIG_VIDEO_SAMSUNG_MEMSIZE_FIMC1=1024
CONFIG_VIDEO_SAMSUNG_MEMSIZE_FIMC2=12288
CONFIG_VIDEO_SAMSUNG_MEMSIZE_MFC0=32768
CONFIG_VIDEO_SAMSUNG_MEMSIZE_MFC1=32768
CONFIG_VIDEO_SAMSUNG_MEMSIZE_TEXSTREAM=10240
CONFIG_VIDEO_SAMSUNG_MEMSIZE_FIMD=3072
Thanks to:
supercurio
chrisryn
existz
xcaliburinhand
hardcore
for either the help with source or the help with questions on the kernel.
If I've missed anyone I apologize and will add you if you remind me.
V1 of JUST the kernel attached here for postarity
V2: (download from the 1st post above)
Updated to voodoo sound v7
Updated to include voodoo color and sharpness fix
Updated config for VPN support
This is huge!!!! Andromeda 3.. looking great
More Contributions and Themes:
Sensation by icezar1
http://forum.xda-developers.com/showthread.php?t=912656
Percent Battery Mod by creepyncrawly
http://forum.xda-developers.com/showthread.php?t=1006736
Dark Fire by 10tonhammr
http://forum.xda-developers.com/showpost.php?p=12807166&postcount=1
Blue Fire by 10tonhammr
http://forum.xda-developers.com/showpost.php?p=12807179&postcount=2
Honeycomb Theme by timbrendelaz
http://forum.xda-developers.com/showthread.php?t=1049192
Hoolm Custom Colors Battery Mod for Andromeda3 by mod777
http://forum.xda-developers.com/showpost.php?p=13154278&postcount=556
Andromeda3 Email with No Exchange Server Security by mod777
http://forum.xda-developers.com/showpost.php?p=13145102&postcount=554
and others.... http://forum.xda-developers.com/showthread.php?t=1035632
Ok I don't mean to really ask, but will this work with the andromedena tek galaxy theme? I really like that theme, and the ROM I only want to try the newest one. Keep up the awesome work
EDIT: the theme does indeed work on A3 if anyone wanted to know
Sent from my SGH-I897 using XDA Premium App
download link is wrong.
http://files.teamkomin.com/Andromeda/Andromeda3-Final.zip
You didn't do what I just think you did...
So this is still based on the GA 9010 ROM?
aehlayel said:
You didn't do what I just think you did...
So this is still based on the GA 9010 ROM?
Click to expand...
Click to collapse
of course it is
Pirateghost said:
download link is wrong.
http://files.teamkomin.com/Andromeda/Andromeda3-Final.zip
Click to expand...
Click to collapse
Try this one
http://files.teamkomin.com/
krips2003 said:
Try this one
http://files.teamkomin.com/
Click to expand...
Click to collapse
/facepalm
i know....where do you think i got the proper link that i posted?
Thank God, this rom has only 1 issue. Good to see 'SANITY' mentioned in the thread.
Pirateghost said:
of course it is
Click to expand...
Click to collapse
awesome, so i'm assuming that there will be no need to wipe for users coming from 1.2?
another thing that crosses my mind.. audience chip, it's been incorporated since the day 1 afaik..
is it only compatible with the 9010 modem (jl2) and the captivate modem (kb1)? Only?
Pirateghost said:
/facepalm
i know....where do you think i got the proper link that i posted?
Click to expand...
Click to collapse
I know where you got that one.... Never mind, I too clicked first
To err is human
this needs to be bumped back to the top
Where is the ORANGE?
Very sane indeed. Will take it for a spin in the weekend.
Sent from my SAMSUNG-SGH-I897 using XDA App
The orange is right here
Orange is a bright color, bad for battery life.
AdamOutler said:
The orange is right here
Click to expand...
Click to collapse
Nice but I actually had pretty great battery life with 2.1
STANDARD DISCLAIMER: USE AT YOUR OWN RISK. By running this firmware mod, you agree that there is the possibility that you may brick your device and neither myself, XDA nor Viewsonic are responsible for supporting you if that occurs. In this case, it is required that you learn and setup nvflash prior to running this mod.
1. Make 100% sure you are at Bootloader 1.2
2. Recommend using Clockworkmod v3.0.2.8 (Bootloader 1.2) tools for flashing.
These are CM7 based ROMs for gtablet with bootloader 1.2(ZPAD T2 should work. But no confirmation from any one yet). It is an integration of different CM7 based rom build and Clemsyn ver 11 1.5ghz Kernel / Pershoot 1.4ghz Kernel (bootloader 1.2) with some tweak learning from Calkulin's Rom. It is pretty similar to Calkulin+Clemsyn 1.5ghz Froyo Combo VERSION 6, while it is for gingerbread.
All the credit goes to the authors of the based rom and kernel. Special thanks to Roebeet for his excellent works on gtablet.
Features:
1. Overclocked by default (max frequesy adjusted by battery level) (For Clemsyn's kernal, check on his original kernel post on how to undervolt with pimpmycpu)
2. Tweaked internal storage & SD card read speeds
3. Annoying ads in programs are blocked
4. Calkulin's battery saving script
Issues:
1. usb pc mount does not work on Clemsyn's kernel
=====
Latest CM7.1 RC1 build from [email protected]: http://www.mediafire...rnr0g9fsxibubbf
=====
===============
Clemsyn 1.5ghz Kernel (bootloader 1.2)
===============
Links:
cm7.0.3 (GB2.3.3, stable build):
http://www.mediafire.com/?8oucsc81csl5m75
cm7.1RC (GB2.3.4, latest build):
http://www.mediafire.com/?7111c0jwza1ea37
gapps:
http://www.mediafire.com/?7yrr1b2sce6sw8l
VEGAn-GE-7.0.0-RC1-Harmony (GB2.3.3, stable build):
http://www.mediafire.com/?upb49eq4d7vpzva
****************************************************************
===============
Pershoot 1.4ghz Kernel (bootloader 1.2)
===============
cm7.0.3(GB2.3.3, stable build):
http://www.mediafire.com/?ob7fxkk9btuwoxc
cm7.1RC(GB2.3.4, latest build):
http://www.mediafire.com/?692chz2lcpektmp
gapps:
http://www.mediafire.com/?7yrr1b2sce6sw8l
VEGAn-GE-7.0.0-RC1(GB2.3.3, stable build):
http://www.mediafire.com/?8xur9w9wh5i4j94
For those who want to build the CM7.1 RC1 or nightly build, take these steps:
1. grab the cm7.1 build, grab pershoot/clemsyn GB kernel for BL1.2, grab the build_script from my cm7.1 rc0 rom.
2. merge the pershoot kernel ans system directory into the cm7.1 build. replace any files if it already existed. replace the build_script with the build_script in my rom.
3. zip them and you should have a cm7.1 for BL1.2 with pretty much the same as BL 1.1. Make sure the directory structure is correct in the zip file.
4. you could use this trick for pretty much all the GB roms based on cm7 mixed with any GB kernel
Warning: this is not and not intend to be a detail instruction. you should at least have certain degree of knowledge about what is going on with this and what this is all about to build a rom. If you brick your device by any chance, I am definitely NOT the right one you would look after. If you are not sure, wait someone else to build the rom for you.
Downloading now! Thanks!
Feels good. It is very smooth. Quadrant scores 3400 out the gate. Very cool.
Is the nvrm_daemon edited in this rom to bring the refresh up to 60?
Wondering if I still need to install this to take the refresh up.
Vlad_z said:
For those with CM7.0.3 you may want to try this version of nvrm_daemon.
I took original file from my CM7.0.3 stable ROM and modified it to have 60Hz update rate.
Click to expand...
Click to collapse
Are gps apps still broken on this? Does Dsp still force close?
Its the same gapps/ DSP manager from March so yeah it still does.
heres a small banner i made for you.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
A nice option for 4349 users who don't want to risk jumping back to 1.1. Thanks for setting these up!
I've been requesting that the cyanogenmod devs actually consider doing this, as well. I also heard a rumor (and it's just a rumor) that a new stock ROM is in the works, and will likely replace 4349 and be on 1.2 as well. So I personally think it's in our best interest to start moving to 1.2 (plus that's likely to be what any HC ROM will be on).
roebeet said:
A nice option for 4349 users who don't want to risk jumping back to 1.1. Thanks for setting these up!
I've been requesting that the cyanogenmod devs actually consider doing this, as well. I also heard a rumor (and it's just a rumor) that a new stock ROM is in the works, and will likely replace 4349 and be on 1.2 as well. So I personally think it's in our best interest to start moving to 1.2 (plus that's likely to be what any HC ROM will be on).
Click to expand...
Click to collapse
nicely said
any chance of froyo on 1.2?
Already done, just not here on XDA. I started posting again after a 2 month hiatus, but I'm not moving my 1.2 ROMs here except as a link (and I'm not permitted to do that).
Google "gtablet 1.2 firmware" and you'll find them.
roebeet said:
Already done, just not here on XDA. I started posting again after a 2 month hiatus, but I'm not moving my 1.2 ROMs here except as a link (and I'm not permitted to do that).
Google "gtablet 1.2 firmware" and you'll find them.
Click to expand...
Click to collapse
so on slatedroid?
i only see 7 roms on there. And i mean a froyo NON TNT based rom. you have one over there?
Brilliant Corners. It feels just like froyo with some tablet tweeks. The only UI diffference I notice in tnt base roms is the notification bar and system settings.
transitoyspace said:
so on slatedroid?
i only see 7 roms on there. And i mean a froyo NON TNT based rom. you have one over there?
Click to expand...
Click to collapse
Brilliant Corners, as just mentioned, and Century Eyes. The latter used to be "gAdam" here on XDA but I ported it to 1.2 in April. It's the Notion Ink Adam EDEN UI, ported to the GTAB.
I don't think anyone's ported the zPad interface to 1.2, tmk. Although technically the newer zPad ROMs are 1.2-based themselves. I mention the Adam a lot, but I keep forgetting that the zPad is almost identical to ours and they moved to 1.2 a few months back, I believe.
roebeet said:
Brilliant Corners, as just mentioned, and Century Eyes. The latter used to be "gAdam" here on XDA but I ported it to 1.2 in April. It's the Notion Ink Adam EDEN UI, ported to the GTAB.
I don't think anyone's ported the zPad interface to 1.2, tmk. Although technically the newer zPad ROMs are 1.2-based themselves. I mention the Adam a lot, but I keep forgetting that the zPad is almost identical to ours and they moved to 1.2 a few months back, I believe.
Click to expand...
Click to collapse
how hard is it to make a zpad rom compatible with 1.2?
is it hard to port roms, i kinda want to start learning. Im decent at themeing.
The original zPad (Wifi) and our GTAB have identical hardware. Rothnic used to create mods of the zPad firmware, and it was mainly rooting it, altering the language to English and tweaking the apps as needed. But all the hardware worked as-is, including the camera. The original zPad firmware was 1.1 dev branch based, just like our GTAB was.
I heard that the zPad T2 is, I believe, 1.2 based. But don't quote me on that as I've never messed with that fimware (last update was in March, as per a quick Google search). If Malata managed to create a full GB or HC ROM for the zPad, we should be able to easily port that to the GTAB, easier than even the Adam.
As for ease, it's mainly a lot of trial and error, and lots of nvflashing when you soft-brick it. Even with the zPad, there's build.prop changes and app changes to make it more English friendly. Plus Gapps, of course.
There's a cm7.1 RC for the harmony platform? ?? Cool! I didn't know that
Beastly + Clemsyn Kernel is Froyo and based on 1.2 bootloader. Another great one from the Adam Developers.
mydave1 said:
Beastly + Clemsyn Kernel is Froyo and based on 1.2 bootloader. Another great one from the Adam Developers.
Click to expand...
Click to collapse
Hey Dave! I haven't tried Beastly yet (backing up BoS this very moment)...maybe it's time?
-Matt
mydave1 said:
Beastly + Clemsyn Kernel is Froyo and based on 1.2 bootloader. Another great one from the Adam Developers.
Click to expand...
Click to collapse
Very true - a favorite for the Adam device, and ported to the GTAB about a month(?) back.
gadgetrants said:
Hey Dave! I haven't tried Beastly yet (backing up BoS this very moment)...maybe it's time?
-Matt
Click to expand...
Click to collapse
I personally had both Calkulin's + Clemsyn and Beasty's + Clemsyn for my daily use for a while. Both rom perform supper well. supper snappy. the only problem for me is froyo does not support "wifi location" and it is unfixable as far as I know. I also get excited about the honeycomb rom for gtablet and use Roebeet's great BOS for a while. The UI is beautiful and it is reasonably stable and perform after 4.0. However, it is too laggy for my taste because of the lack of opengl support. The reason why I compile these roms are: I want the speed of those 2 great froyo roms. I also want to use a lot of applications that need wifi location support and I want to stay on 1.2.
The quadrant score of CM7.1RC + Clemsyn's is very close to the above 2 roms (around 4000 in my test). give CM7.1RC + Clemsyn or CM7.1RC + Pershoot a try if you like the speed of those 2 froyo's rom. You will be surprised by the performance of these 2 roms.
zyhong said:
I personally had both Calkulin's + Clemsyn and Beasty's + Clemsyn for my daily use for a while. Both rom perform supper well. supper snappy. the only problem for me is froyo does not support "wifi location" and it is unfixable as far as I know. I also get excited about the honeycomb rom for gtablet and use Roebeet's great BOS for a while. The UI is beautiful and it is reasonably stable and perform after 4.0. However, it is too laggy for my taste because of the lack of opengl support. The reason why I compile these roms are: I want the speed of those 2 great froyo roms. I also want to use a lot of applications that need wifi location support and I want to stay on 1.2.
The quadrant score of CM7.1RC + Clemsyn's is very close to the above 2 roms (around 4000 in my test). give CM7.1RC + Clemsyn or CM7.1RC + Pershoot a try if you like the speed of those 2 froyo's rom. You will be surprised by the performance of these 2 roms.
Click to expand...
Click to collapse
Thanks for the quick comparisons, I been on BoS and loving it but I'll try these out real quick for a day or two just to see how nice they are. And what you're saying is that these 2 do support wifi location right?
MosTERRA said:
I will buy Motorola Atrix. Then the Elite SX and Elite ROM another will not be updated.
Thanks for interest.
Click to expand...
Click to collapse
[U8800] Elite ROM X1 .32+.35 kernel Multilanguage by TerraMino 2012-03-19
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MosTERRA said:
Elixe X1 .32 kernel FIXED / 2012-03-19
http://www.mediafire.com/?ria7b9hvpsynb7z
Elixe X1 .35 kernel FIXED / 2012-03-19
http://www.mediafire.com/?csaqe2nqwa8g5gk
Changelog:
- Bootloop fixed
- Slow boot fixed
- Cosmetic details
- Improved audio
Click to expand...
Click to collapse
MAIN FEATURES
Based MIUI
Default kernel is Stockwell
Fast boot
USB tether
Wi-fi tether is not working (you can use Barnacle in the Market)
More responsiveness and fast user interface
Advanced sound quality. Incredible in-call sound and perfect music quality (near audiophile quality)
Better GPS (for Turkey)
Embedded Sony Ericsson Bravia Engine
High precision monitoring of GSM signal and WiFi signal
Better Internet speed and security
Prevented ad-servers (internet)
Better power management and low battery consumption
Fully optimized system with tweaks
Better 3D performance
ZipAlign
Very quick focus and photo shot (autofocus must be enabled)
Elite ROM theme
NEW FEATURES FOR V9.7
Integrated Galnet framework for better interface and battery performance
Integrated Privacy Security Management feature to core-framework (managing with PDroid application)
Improved global settings for GPS
Compass sensor corrected
Improved camera driver for better macro photo shot
Improved 3D drivers for better 2D and 3D experience
Download Elite ROM v9.7g -- Galnet Framework (Languages: Only TR-EN-CH)
http://www.mediafire.com/?fsayurfa07tu86u
(Fixed bootloop and kernel issues)
Download Elite ROM v9.7m -- MIUI.us Framework MULTILANGUAGE (Languages: ES-RU-GR-PL-SW-DE-HU-KO-VI-CZ-SK-SL-TR-HE-AR-PE-UK)
http://www.mediafire.com/?0noh564lmu66bb3
(Fixed bootloop and kernel issues)
Download PDroid Security
http://www.mediafire.com/?72irqahu2j57ip3
Pdroid.apk (132 Kb)
After ROM installation, first step install to Pdroid.apk (if you want Privacy Security Management feature)
If you dont use PDroid, first flash that .zip file
PDOID-IPTAL (uninstall) addon for Galnet Framework:
http://www.mediafire.com/?wd9erk4mr9dqfml (16 mb)
PDOID-IPTAL (uninstall) addon for Multilanguage Framework:
http://www.mediafire.com/?gugh2bfe7d5uku7 (17 mb)
Requirements:
.32 kernel B138 or B163 stock ROM must be installed.
CWM 5.0.2.3
dream4 said:
the point is to downgrade from 2.3 to 2.2.
Maybe this might help clearly.Just Terramino(rom complier)claims that 2.3 is like a poison ivy covers your device very tight;so repeat the loading 2.2 action 3 times for better clean.
Downgrade from 2.3.5 back to 2.2.2
1) Download U8800 V100R001C00B138SP04 (Overseas General) Android 2.2.2
2) Extract the "dload" folder and copy it (along with its contents) to the ROOT of the SD Card.
3) Turn on your U8800 while holding [VOL-] and [VOL+] and the Android 2.2.2 install should start.
4) Once finished you should be back to 2.2.2.
5) If you phone does not boot correctly power on phone while holding [VOL+] to boot into recovery and Reset to factory defaults.
6) Delete the "dload" folder from the SD Card.
Click to expand...
Click to collapse
important!
Even if you don't wipe data/factory reset,the rom will automatically delete all user data by itself,so backup all your applications,sms,call logs...etc. if necessary
INSTALLING:
- Wipe data/factory reset
- Wipe Cache partition
- Advanced -> Wipe Dalvik Cache
- Mounts and Storage -> "mount /system"
- Mounts and Storage -> "format /system"
Finally install zip from sdcard -> select ROM file
After installed, go to Spare Parts and run it. Then choose Window animations and Transition animations options to Fast. In this way, the desktop will have increased fluency.
--------------------------------------------- old version-------------------------------------
Elite ROM v9.6 download link:
http://www.mediafire.com/?ezmp7d7vdz301dp (Elite.ROM.v9.6.by.TerraMino_2012-02-01.zip)
(PS: This ROM from a Turkish site Donanim Haber (the largest forum in Turkey). Terramino the ROM developer, ROM publishing for a long time in this forum. At the same time, many users use this ROM. Is not new.
I am not the ROM developer to provide answers to your questions in time. I hope you will understand.)
More fast boot patch (for v9.6!)
MosTERRA said:
Problem solved.
Currently booting 30 - 38 seconds.
Does this be enough?
I prepared a small patch file. May friends who want to install from the link below.
http://www.mediafire.com/?c9472wjul05vmb9 (Install on CWM)
Dalvik Cache cleaned and re-adjusted during installation. For this reason, the phone still will be slow during the initial boot. Shut down and restart the phone after first opening. Now you see the opening of the phone quickly, around 30-38 seconds.
Click to expand...
Click to collapse
Alternative kernels for Elite ROM v9.6
dream4 said:
http://www.mediafire.com/?0jibeitpy4f4ivl
Elite rom's alternative kernels:You may want to try for different purposes.
Franco Kernel: Last franco,(most know its fame)If you want high performance use with 3d drivers.
Suggested cpu:600-1024 smartassv2.(Tether doesn't work with Franco)
Stockwell Kernel(Elite comes with this): If you prefer tethering,then use this kernel.(native usb tethering works,wifi tethering may need an app like Barnacle).If you prefer 3d drivers,then use 368-1024 smartassv2.If you want longer battery choose 368-600 smartassv2.(It'll be still fast).During video recording,use 544-1024 conservative,after shoot return 368-1024 smartassv2.
Stockwell Kernel 2: A modified version of Stockwell kernel.Battery performance is better.Tether may not work,so test on your own phone if you need tethering.Suggested speed 368-1024 conservative.If you want more battery life,prefer 368-600 conservative(It'll be still fast).During video recording prefer 544-1024 conservative,after that you can return 368-1024 conservative.
Ps:Guys,in our forum all users are really happy with this Elite both with three kernels.Everybody is reporting really high battery performance.Don't hesitate to try which will be more suitable for you.
Click to expand...
Click to collapse
Elite ROM v9.6, factory software on the phone that allows you to take better pictures with Bravia Engine comes from property.
Here are sample photos taken with this feature.
http://i.imgur.com/VXaq5.jpg
http://i.imgur.com/uRhFv.jpg
http://i.imgur.com/xj1Oh.jpg
http://i.imgur.com/ePFcZ.jpg
http://i.imgur.com/bUDHE.jpg
(Photos by AhmtOzdmr)
Well this came as a surprise
Too bad it's just for .32 . Do you know if a .35 version is coming?
ooie said:
Well this came as a surprise
Too bad it's just for .32 . Do you know if a .35 version is coming?
Click to expand...
Click to collapse
TerraMino waiting for franco's new .35 based kernel. We have new .35 ROM when he published new kernel (TerraMino says )
Thanks dude, trying.
thank you for man..
benchmark result with antutu
1 Ghz
by CAYAR
Looks nice. I will give it a try after franco gets his .35 kernel done and released.
EDIT: Antutu score seems to be about the same as with any other rom.
Btw, is this gingerbread based rom with ics icons?
So far so good! It is certain that I am stick to this rom. Thanks for sharing this lovely rom.
Looks VERY nice
Any known bugs?
For people running Official 2.3 I take it we will need to downgrade to Official B138 before installing?
Thanks in Advance!
That-Guy said:
Looks VERY nice
Any known bugs?
For people running Official 2.3 I take it we will need to downgrade to Official B138 before installing?
Thanks in Advance!
Click to expand...
Click to collapse
there is no bugs and yes need to downgrade to offical B163
---------- Post added at 09:46 PM ---------- Previous post was at 09:42 PM ----------
ooie said:
Well this came as a surprise
Too bad it's just for .32 . Do you know if a .35 version is coming?
Click to expand...
Click to collapse
already available .35 version but it's not final version
terramino's working on
if you want to try http://www.mediafire.com/?53jy2z52ybgdrdy (not ML)
darthist said:
there is no bugs and yes need to downgrade to offical B163
---------- Post added at 09:46 PM ---------- Previous post was at 09:42 PM ----------
already available .35 version but it's not final version
terramino's working on
if you want to try http://www.mediafire.com/?53jy2z52ybgdrdy (not ML)
Click to expand...
Click to collapse
.32 and .35 is just the Kernel version right?
Will there be much difference between the two?
That-Guy said:
.32 and .35 is just the Kernel version right?
Will there be much difference between the two?
Click to expand...
Click to collapse
it's name is MIUI based Performans Rom X English - .35 Kernel and installing on stock ROM 2.3.5
important specs:
Extreme touch sensitivity is reduced due to factory 2.3.5 software.
.35 Kernel which is the biggest problem was corrected incoming and outgoing speech sounds.
Only when listening to music, the highest volume level is below normal. This problem will be corrected in future versions.
but elite ROM 9.6 newest because TerraMino waiting franco's .35 kernel and he will going to develope Performans Rom X new kernel realesed
(sorry my english )
Gonna give it a try. I'll report back later today or tomorrow.
edit: the .35 version that is.
ooie said:
Gonna give it a try. I'll report back later today or tomorrow.
Click to expand...
Click to collapse
TerraMino says:
If you want to use the Elite ROM v9.6, B163 factory software must be installed on your phone. If you have installed the factory software 2.3.5 before, you should definitely doing the following steps for B163.
Be sure to backup your IMEI. Use an external SD card during all transactions below. B163 dload folder on an external SD card.
B163 Install the first time. Installation ends and the phone is opened by turning off and on again for the second time so as to B163-ROM install.
After installing the second time, wait for the phone opening. Remove the SD card and the screen went pink then off to install the CWM 5.0.2.3
Open phone by CWM and do all the wipe process.
Then re-insert the SD card and install the B163 for the third time.
The phone opens to shotdown and re-install in the pink screen the CWM 5.0.2.3
These steps are the traces left by the stock 2.3.5's completely clean.
If you do not install 3 times B163, you may experience various problems.
TerraMino says's end
Installed this ROM and for now everything is fine!
No problems with Wi-Fi for now, going to restore my APPs with Titanium Backup and see if everything is fine. Thanks!
trocLas said:
Installed this ROM and for now everything is fine!
No problems with Wi-Fi for now, going to restore my APPs with Titanium Backup and see if everything is fine. Thanks!
Click to expand...
Click to collapse
I was glad for you
Quick thoughts and facts about the .35 kernel version (see post #11)
- Custom theme as stock, blends a little blue and ICS-esque stuff into the default theme, and I love it, looks really fresh
- ICS icons too, not a big fan of them, luckily there's always the Vexillum Project icons to use. The font is awesome.
- It's based on MIUI 2.1.13 and it uses ret4rt's 2.6.35.7 kernel dated January 13th
- English is default language, Traditional and Simplified Chinese are the other choices
- Speaker still has the buggy and crackling sound while playing music
- Can't say if it's faster than ret4rt's MIUI, needs a few days of testing at least
Will edit this post later on as I see fit
I think performance X is of interest for more
ooie said:
Quick thoughts and facts about the .35 kernel version
- Custom theme as stock, blends a little blue and ICS-esque stuff into the default theme, and I love it, looks really fresh
- ICS icons too, not a big fan of them, luckily there's always the Vexillum Project icons to use
- It's based on MIUI 2.1.13 and it uses ret4rt's 2.6.35.7 kernel dated to January 13th
- English is default language, and Tradiotional and Simplified Chinese are the other options
Will edit this post later on as I see fit
Click to expand...
Click to collapse
Regarding the Incall volume and the speaker background noise (like extreme bass) are fixed?
Galaxian-Soup is proud to bring you Milestone 5 of The Android Open Kang Project for Galaxy Tab 8.9 GT-7310/GT-7300!
You know our roms, We HAVE 3g!
Still the only place to get AOKP based rom's for the Galaxy Tab 8.9! Tell Roman (of AOKP) you want Galaxian Soup to become the officiaal maintainer of AOKP for the grab 8.9!
*** Update 05/10/2012 ***
We are now official with AOKP and Roman!! New builds will be posted shortly in a new thread being composed.
Change Log
AOKP Milestone 3 Galaxian Soup (with motley kernel v3+)
Based on AOKP build 34 (Apr 30 sync)
Fixed, 3g mobile data indicator
Various wifi fixes
Downloads
GT-7310 WiFi
AOKP Milestone 5 Galaxian-soup ICS for GT-7310
md5 - fc42d06e5bfb1ae9ef02698d3fe70c9d
GT-7300 3G
AOKP Galaxian-soup ICS for GT-7300 (3g)
md5 - a2053d4c84d957c9bae3f092ab3fe535
Google Apps
Google Apps Galaxian-Soup Gapps 3
Torrent Links
Courtesy of ceno808
See bottom of Post (ms5 lol coming soon)
Previous Releases
AOKP Build 34 Galaxian-soup ICS for GT-7310
AOKP Build 34 Galaxian-soup ICS for GT-7300 (3g)
AOKP Build 32 Galaxian-soup ICS for GT-7310
AOKP Build 32 Galaxian-soup ICS for GT-7300 (3g)
AOKP Galaxian-soup ICS Release 3 for GT-7310
AOKP Galaxian-soup ICS Release 3 for GT-7300
AOKP Galaxian-soup ICS Release 2.1 for GT-7310
AOKP Galaxian-soup ICS Release 2.1 for GT-7300
AOKP Galaxian-soup ICS Release 1 for GT-7310
AOKP Galaxian-Soup ICS Release 1 for GT-7300 with 3g
Working
Pretty Much everything our AOSP rom does
Not working:
Cameras *this is going to wait most likely for samsung :-/
Torch
Installation:
*** You should be able to flash over previous builds, we have tested, if you have issues after, please try a wipe/re-flash ***
In CWM recovery, clear your data/factory reset
Clear the dalvik cache (under advanced, or under the wipe menu in overcome cwm)
Flash the provided zip using CWM recovery
Flash gapps from CWM recovery
Bootup and setup your Google account
OC if you want with ROMControl and set to interactive governor!
Give it a chance, this is a deodexed ROM and will boot slow the first time and when you use apps the first time.
Videos
Reserved
SIZE="4"]Change Log[/SIZE]
AOKP b34 Galaxian Soup (with motley kernel v3+)
Based on AOKP build 34 (Apr 26 sync)
Fixed, 3g mobile data indicator
Change Log
AOKP b32 Galaxian Soup (with motley kernel v3+) April 01, 2012
Based on AOKP build 32 (Apr 18 sync)
Release 3 (with motley kernel v3+) April 01, 2012
Based on AOKP build 29 (Mar 31 sync)
AOKP-GS-R3 (with motley kernel v3+, 7310/7300) March 31, 2012
See aokp website for full change log.
ro.build.id set to IMM76D (android 4.0.4)
AOKP-GS-R2 (with motley kernel v3+, 7310/7300) March 23, 2012
Bluetooth tethering fixes (thanks rmcc and CyanogenMod)
3G tethering fixes (thanks isimobile)
ro.build.id set to IML74K in case any apps require it (Chrome's recent patch makes this not necessary any more)
webkit patch from Google, still testing to see if it helps the random browser freezes.
Upgraded Broadcom wifi driver from stock bcm4330 to bcmdhd 5.90.195.35 (thanks pershoot)
Misc wireless and network patches
Team Galaxian-Soup!
nycbjr - Team Leader, dev, AOKP build master (for this release lol) testing/troubleshooting, and lead motivator
Editor of iTweakiT.com
the COMPULSiVE REENGINEERING blog
motley - lead dev, p5 device tree, final build, kernel development, all around awesomeness!
termleech - Dev bringing considerable experience from the Galaxy Nexus and Moto Atrix ICS world
Twitter: @codemonkeyjava
Google+ gplus.to/codemonkeyjava
tommrazek01 - testing/troubleshooting, ideas guy, future boot animations
Twitter
Google+
poisike - pioneer testing with other tegra ICS ROMs, testing/troubleshooting, Lead 3g
Credits:
Google - and the AOSP for the releasing the OS
The Android Open Kang Project [AOKP], and specificaly Roman, thanks a million!
Samsung for the awesome device and kernel source (for HC 3.1 at least)
alterbridge - for his CWM Recovery port for 73xx.
Youngidenty - Team Branding and Logo provided by Dustin Chuck Young of Young Idendtity http://www.youngidentity.com
Source's are available soon on GitHub
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Screenshots
Reserved2 for future logs...
Way awesome
Sent from my GT-P7310 using xda premium
it is awesome.
lot options and toggle .
not going back to galaxian soup.
Great job guys.I'm always a fan of Modding roms!
Sent from my GT-P7300 using XDA
Bigthanks! But is there a way we can check a change log between the AOSP and AOKP, I cant pretty find the differenxes except in settings tab
Sent from my HTC Desire S using XDA
Been waiting for this so long.. Thanks very much.. Will flash and feedback
Sent from my Galaxy Nexus using Tapatalk
hey guys is there a way to get a launcher that is super smooth and not laggy in landscape because every rom is so far but I found out that if you long press the power button and select torch, it FC`s the navigation bar and the launcher is liquid smooth with zero lag until the status bar kicks back in, so does that mean it is the status bar hogging some memory ? I've tried this with Tlaunher and nova launcher with the sane reault
Sent from my GT-P7310 using Tapatalk
I found the following issues
1) Apn config file contains errrors. It include the wrong configuration setting for Mobifone. mnc values should be "01" rather than "00".
<apn carrier="Mobifone MMS" mcc="452" mnc="01" apn="m-i090" user="wap" password="wap" mmsc="http://203.162.21.114/mmsc" mmsproxy="203.162.21.114" mmsport="8000" type="mms" />
<apn carrier="Mobifone" mcc="452" mnc="01" apn="m-wap" user="mms" password="mms" type="default,supl" />
Click to expand...
Click to collapse
2) Weather (in Rom Control) doesn't change to Metric values, location not shown, day of week not shown. Hope that it will show even weather graphic soon.
As this Rom is so smooth, I will need to dig deeper to find problems. . Thank you for your great work.
Try ADW launcher EX, the best so far as per my user experience. Smooth and customizable
Sent from my HTC Desire S using XDA
Thank you for a great work!
I have found a couple of issues that you may check out if yiealds to other tabs or if it is just to my tab.
1. The torch does not work and makes the launcher to halt, then the launcher restarts and restores itself (without the tab restarting).
2.. By charging the telephone in Shutdown mode with wall outlet cable, the battery animation runs. After some seconds the creen dims in two- thre steps until it turns off. Then the screen lits up fully again and cycles this procedure. Is it a bug or a feature? It might be best if the screen dims down to the stage off or to the level before off to charge faster and not to have a discodance when charging in the night
3. What does the file "Unicorn Porn" do? Strange name for a ROM-file ... Is it a jokeful name or a harmful file that has infected my tab (same logo as the Rom Control). Edit: I guess the file has something to do with boot animation that does not work on mine when toggle off not bootanimation. Maybe separate bootanimations have to be installed...
4. When using SetCPU, the voltage control in the performance menu under Rom Control does not show proper values. It is however only a minor case as they show properly in SetCPU.
Thanx again!
Sent from my GT-P7300 using Tapatalk
decaydance99 said:
hey guys is there a way to get a launcher that is super smooth and not laggy in landscape
Click to expand...
Click to collapse
try APEX Launcher. ICS based and pretty awesome imho!
https://play.google.com/store/apps/details?id=com.anddoes.launcher
Awesome... been waiting for a ROM like this.. flashing it now.
flashed this on top of cm9 with only cache&dalvik wipe (just for fun ) and all is running good so far!!
edit: crashes when activating torch from the toggle menu.
[Q]Is there a way to hide the taskbar? would really love that option but couldn't find it anywhere...
But.... what is this?
Sent from my Galaxy Nexus using Tapatalk
WoodpeckerS said:
Thank you for a great work!
I have found a couple of issues that you may check out if yiealds to other tabs or if it is just to my tab.
1. The torch does not work and makes the launcher to halt, then the launcher restarts and restores itself (without the tab restarting).
2.. By charging the telephone in Shutdown mode with wall outlet cable, the battery animation runs. After some seconds the creen dims in two- thre steps until it turns off. Then the screen lits up fully again and cycles this procedure. Is it a bug or a feature? It might be best if the screen dims down to the stage off or to the level before off to charge faster and not to have a discodance when charging in the night
3. What does the file "Unicorn Porn" do? Strange name for a ROM-file ... Is it a jokeful name or a harmful file that has infected my tab (same logo as the Rom Control). Edit: I guess the file has something to do with boot animation that does not work on mine when toggle off not bootanimation. Maybe separate bootanimations have to be installed...
4. When using SetCPU, the voltage control in the performance menu under Rom Control does not show proper values. It is however only a minor case as they show properly in SetCPU.
Thanx again!
Sent from my GT-P7300 using Tapatalk
Click to expand...
Click to collapse
Don't worry, it's not anything infectious. It is a really weird live wallpaper.
---------- Post added at 08:28 PM ---------- Previous post was at 08:28 PM ----------
pseudoheld said:
flashed this on top of cm9 with only cache&dalvik wipe (just for fun ) and all is running good so far!!
edit: crashes when activating torch from the toggle menu.
[Q]Is there a way to hide the taskbar? would really love that option but couldn't find it anywhere...
Click to expand...
Click to collapse
Not possible yet in ics as far as i know.
tommrazek01 said:
Not possible yet in ics as far as i know.
Click to expand...
Click to collapse
Shame about that. Really liked that lotion on honeycomb.
What does the "swagger" toggle do????
I pressed it but nothing happened ...lol
Holy Crap! My Tab is flying and ICS is awesome on this thing.... thank you so much. I'm also running AOKP on my GNex... so this is a nice little touch to now have them on both devices... thanks again, keep up the amazing work.
Love this ROM, it's fast!
I noticed the voltage settings in the rom menu don't work (instead used voltage control for it)
Freshly built Android 4.4.4 ROM based on Omnirom KitKat !
The Team 'IconiaHD' is proud to present a new ROM for your Acer A500 or A501 tablet.
This small team is composed of:
- HenrikE: A200 owner, responsible for an unofficial CM-10.2 build for the A200
- Doume: A200 owner, experienced linux developer
- macia10: A501 owner, tester
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is essentially the same rom as we published for the A200 here: http://forum.xda-developers.com/showthread.php?t=2693179 and here: http://www.acertabletforum.com/forum/acer-a200-roms/10043-rom-a200-omnirom-kitkat-4-4-2-a.html
We have now modified our sources to support also the A500!
Why Omnirom, and not Cyanogenmod ?
Google , through AOSP repository, has dropped support for the Tegra 2 platform. The Tegra 2 does not support the 'neon' instruction set, and more importantly relies on a set of old (ICS) proprietary hardware libraries. AOSP has dropped support for both non-neon devices and the older hardware libraries.
Cyanogenmod has decided to follow AOSP on this and has dropped Tegra 2 support since CM-10.2. With CM-10.2 the differences were not yet very big and could be overcome. But with CM-11 it has become an unreasonably large effort to add Tegra 2 support.
Only Omnirom, for now, has included the forward-ported code in its repository to support machines like Acer A500
How to install
Recovery
To flash this rom, it's necessary to have a recent recovery (at least CWM 6.0.4.4 or TWRP 2.6.3.1) having Selinux capabilities.
Otherwise the flash operation fails with status 0 or status 7. There are also some problems installing GApps with Thor's recovery v.1.8.1.
We recommend using CWM 6.0.4.5 by nelsontky: http://forum.xda-developers.com/showthread.php?t=2583710
Flashing
Boot in recovery mode to flash the KitKat Rom.
First, don't forget to execute a 'Wipe Data/Factory reset'
Flash the KitKat Rom
Flash the Minimal Gapps
Do a 'wipe cache partition'
Flash the SuperSU zip file if you need it
Flash the Netflix fix if you need it
And reboot System !
Be patient on first boot... There's a lot of background work to do, before coming to the 'Welcome' screen. Don't worry if you are stuck with a black screen for several minutes. Next boot will be much faster.
After first configuration, it's recommended to reboot the tablet to avoid some unstabilities after 1st boot.
Enjoy KitKat !
Downloads
Download build 8, 2015-02-10, from here:
NOTE: This is an untested build! If you try it, please report back on how it runs! The A501 version probably has the same stability problems as earlier builds, but please feel free to test it. It's at least possible that some update of the OmniROM sources has helped.
A500: omni-4.4.4-20150210-a500-IconiaHD.zip
A501: omni-4.4.4-20150210-a501-IconiaHD.zip
(Build 7 was for A200 only)
Download build 6, 2014-07-14, from here:
Primary A500: omni-4.4.4-20140714-a500-IconiaHD.zip MD5: c5fcabf327c390f5c4ef5495edda616c
Mirror A500: omni-4.4.4-20140714-a500-IconiaHD.zip
- fixed Plex video streaming (reverted to 4.4.2 version of Http Live Streaming)
- sync with OmniROM repos
- network location works
This build is A500 only since the issues with the A501 version are not yet solved.
Download build 5, 2014-06-23, from here:
Primary A500: omni-4.4.4-20140623-a500-IconiaHD.zip MD5: 7d6b17f7dc9027371a56f04b9377efe9
Mirror A500: omni-4.4.4-20140623-a500-IconiaHD.zip
- updated to Android 4.4.4
- sync with OmniROM repos
- permanent Netflix fix from Asus TF101 included
Unfortunately we can't release the A501 version yet because we are struggling with serious stability problems related to the 3g driver.
Download build 4, 2014-04-29, from here:
Updated! If you downloaded build 4 with an older date, please download again!
Primary A500: omni-4.4.2-20140429-a500-IconiaHD.zip
Mirror A500: omni-4.4.2-20140429-a500-IconiaHD.zip
Primary A501: omni-4.4.2-20140429-a501-IconiaHD.zip MD5: 898feec518b2fb60e1a551208f318a7f
Mirror A501: omni-4.4.2-20140429-a501-IconiaHD.zip
Changelog
- First release for A501, includes MBM HAL to support GPS and 3g
- Fixed network location provider
- Fixed boot animation
- Removed apps Movie Studio, Voice Dialer, OpenDelta
- Sync with OmniROM repos
Download build 3, 2014-04-04, from here:
omni-4.4.2-20140404-a500-IconiaHD.zip
Changelog
- First release for A500
Build 1&2 were for A200 only.
GApps are here:
http://forum.xda-developers.com/showthread.php?t=2397942
For the A200 the Pico package is the only one that is small enough so we generally recommend that. The A500 has more space in the system partition and should be able to use the larger packages as well.
SuperSU is here: (needed only if you wish to have a full rooted access)
SuperSU is needed for root, get the latest CWM flashable zip from here:
[2014.02.06] SuperSU v1.93 - xda-developers
Netflix fix for builds 1-4 (not needed for build 5) is here: netflixfix.zip
Flash in recovery. It will just copy this simple script to init.d. It is run during boot and changes a setting in the Netflix configuration to use a player backend that works with the Tegra 2. This is a workaround for a bug in Netflix that makes it choose a video player backend that is incompatible with the Tegra 2. The config file is created the first time Netflix is started, so the very first time you start Netflix it will force close. After that, reboot, and then Netflix should work.
Remember : in all cases, it's a good idea to make a backup before installing!
We're not responsible, in any way, if you brick your tablet!
Big thanks to:
- the Omnirom team
- pjsports for the A500 JB kernel and device tree
- nelsontky for building the recovery
- and everyone else that has been working on the Iconia A500 / A200!
The kernel, and the device tree are available at GitHub: IconiaHD Github
Known issues:
All builds
Noise in audio playback, caused by a too low default minimum CPU frequency. Solved by increasing minimum frequency to 312 MHz.
-In Settings / About tablet, tap build number 7 times until you get a message "you are now a developer". This enables the performance menu.
-In settings / Performance, increase minimum cpu frequency to 312 MHz. Also tick "set on boot" to make it permanent.
Build 6
General
-Default sound recorder app is included but the icon does not show up
-A501 version is unusable because of random reboots
Incompatible apps
-?
Notes
-XBMC should work if you install this version: http://www.mediafire.com/download/0cg8j1dg994gdu6/xbmcapp-armeabi-v7a-debug-2013-09-06.apk (found by user SDBerndt at acertabletforum, thanks!)
Build 5
General
-Default sound recorder app is included but the icon does not show up
-A501 version is unusable because of random reboots
Incompatible apps
-?
Notes
-XBMC should work if you install this version: http://www.mediafire.com/download/0cg8j1dg994gdu6/xbmcapp-armeabi-v7a-debug-2013-09-06.apk (found by user SDBerndt at acertabletforum, thanks!)
Build 4
General
-Default sound recorder app is included but the icon does not show up
Incompatible apps
-?
Notes
-XBMC should work if you install this version: http://www.mediafire.com/download/0cg8j1dg994gdu6/xbmcapp-armeabi-v7a-debug-2013-09-06.apk (found by user SDBerndt at acertabletforum, thanks!)
-Netflix needs a workaround to run, see first post
Build 3
General
-Network Location Provider does not work
-Default sound recorder app is included but the icon does not show up
-The boot animation stops after few seconds, instead of looping until boot is completed
Incompatible apps
-Movie Studio (built in)
Notes
-XBMC should work if you install this version: http://www.mediafire.com/download/0cg8j1dg994gdu6/xbmcapp-armeabi-v7a-debug-2013-09-06.apk (found by user SDBerndt at acertabletforum, thanks!)
-Netflix needs a workaround to run, see first post
Build 2
A200 only
Build 1
A200 only
I'd really prefer to see someone port a clean working copy of CyanogenMod 11 to this device, personally. the TegraOwners team already has a working port of OmniRom on the A500, which is a little laggy, but otherwise fully functional(including netflix, sound recorder, etc.)
kronflux said:
I'd really prefer to see someone port a clean working copy of CyanogenMod 11 to this device, personally. the TegraOwners team already has a working port of OmniRom on the A500, which is a little laggy, but otherwise fully functional(including netflix, sound recorder, etc.)
Click to expand...
Click to collapse
Well then why not try doing it yourself?
The main idea with this rom is to provide an open source alternative for the A500. Not everyone appreciates the closed source policy at the "other forum".
sorry, I sort of worded my post a little harshly and it came out wrong.
I'm actually plenty happy to see an alternative to their roms, and to see that someone is working on the A500 at all.
I meant to say that although it's nice to see, I would personally rather see someone try to port it(even if it's a failed attempt, and post their results so others can try and help out), even though it's a lot of work and a lot harder than AOSP at the moment.
Unfortunately I don't have the knowledge or skills to get any rom working on any device. I've even tried compiling roms before, and failed. Maybe someday!
kronflux said:
sorry, I sort of worded my post a little harshly and it came out wrong.
I'm actually plenty happy to see an alternative to their roms, and to see that someone is working on the A500 at all.
I meant to say that although it's nice to see, I would personally rather see someone try to port it(even if it's a failed attempt, and post their results so others can try and help out), even though it's a lot of work and a lot harder than AOSP at the moment.
Unfortunately I don't have the knowledge or skills to get any rom working on any device. I've even tried compiling roms before, and failed. Maybe someday!
Click to expand...
Click to collapse
Ok no problem. We actually did try to build CM first. But we could never get it to display the user interface because of the missing support for our graphics libraries. When we realized how big the effort would be to get it working, and that support was already available in OmniROM, we switched. I don't know about Thor, but I'm guessing his reason for switching to omni were similar.
Our sources for cm11 are on github, in branch "cm11" and only in the a200 device tree. It's a fair bit behind the OmniROM version now though. It would be better to take the omnirom branch and modify it back to CM format. The differences between CM and Omni device trees are not very big.
Edit: I should add that the challenging part would be to modify the CM android_frameworks_av and android_frameworks_native packages to add support for the tegra2 libraries. There alse seems to be a quite new bug in the CM build system that makes it compile in neon instructions even when it shouldn't.
Prefer anything over CM, thanks! I'll have to reroot since I upgraded to the latest version of ICS. I'll report back any issues.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Henrik & the team, many thanks for your efforts. I never thought Kitkat would ever reach the shores of the A500. I thought all Rom support had all but ended.
Sent from my HTC One X using Tapatalk
Nice work, I thought for sure that we would never see 4.4 on an A500. I have it flashed and running. I tried Netflix and it force closes. Also the video recording doesn't work.
Robert417919 said:
Nice work, I thought for sure that we would never see 4.4 on an A500. I have it flashed and running. I tried Netflix and it force closes. Also the video recording doesn't work.
Click to expand...
Click to collapse
Thanks for the report! Which app did you use to test video recording?
I used the stock app.
Wow KK! Time to dig out my old A500
Is this overclocked?
Sent from my LG-P769 using xda app-developers app
kennyb6 said:
Is this overclocked?
Click to expand...
Click to collapse
Yes, overclocking is included. You just have to enable it in the developer options.
I found a workaround for Netflix here: https://github.com/CyanogenMod/android_device_hardkernel_odroidu2/blob/cm-10.2/conf/98netflix
It seems to work also on this rom, it displays the interface now instead of just closing. But nobody in the team has a Netflix account so we haven't been able to get further than that. I made a simple flashable zip to install the fix. Simply flash it in the recovery. It will just copy one file, and not touch anything else. The download link is in the first post.
Flashed and it worked. I was able to stream and all good. Awesome!
HenrikE said:
I found a workaround for Netflix here: https://github.com/CyanogenMod/android_device_hardkernel_odroidu2/blob/cm-10.2/conf/98netflix
It seems to work also on this rom, it displays the interface now instead of just closing. But nobody in the team has a Netflix account so we haven't been able to get further than that. I made a simple flashable zip to install the fix. Simply flash it in the recovery. It will just copy one file, and not touch anything else. The download link is in the first post.
Click to expand...
Click to collapse
USB Device Not Recognized
Hey everyone,
Sorry if this is a dumb question... I just picked up an A500 tonight, and can't get the USB drivers to work. Specifically, when I plug in the cable I get "USB Device Not Recognized". As a result, I can't get into boot loader mode, etc. I downloaded the Acer driivers, the Universal Android Drivers, etc, and it does the same for all of them. Any ideas?
Thanks!
Mandy
Dalvik_Cache said:
Hey everyone,
Sorry if this is a dumb question... I just picked up an A500 tonight, and can't get the USB drivers to work. Specifically, when I plug in the cable I get "USB Device Not Recognized". As a result, I can't get into boot loader mode, etc. I downloaded the Acer driivers, the Universal Android Drivers, etc, and it does the same for all of them. Any ideas?
Thanks!
Mandy
Click to expand...
Click to collapse
Maybe a faulty usb cable?
macia10 said:
Maybe a faulty usb cable?
Click to expand...
Click to collapse
The for the idea. I've tried a few. I just tried a new PC too. Think maybe it's the tablet...
Sent from my A500 using Tapatalk
Dalvik_Cache said:
The for the idea. I've tried a few. I just tried a new PC too. Think maybe it's the tablet...
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
Please try to download those drivers and try:
http://global-download.acer.com/GDF...NIA A&Step3=A500&OS=ALL&LC=en&BC=ACER&SC=PA_6
And on what rom are you currently?