Database Users

SetCpu Settings?

Mine is
Performance
Min/Max 1.2 ghz
Auto dectect
Whats yours?

Really auto detect? After every kernel dev says that auto detect isn't stable?
Really?

what should i put?

RacerXFD said:
Really auto detect? After every kernel dev says that auto detect isn't stable?
Really?
Click to expand...
Click to collapse
???
you have to use auto-detect for setcpu to detect your availble clock speeds
on-demand is BROKEN
performance will drain your battery abnormally
running at 100 min / whatever max on conservative is the most stable option for this device at the current time

Leave the advanced settings alone also?

jt1134 said:
you have to use auto-detect for setcpu to detect your availble clock speeds
Click to expand...
Click to collapse
not to contradict, but you dont have to use it, you can use the setCPU.txt file and i recommend it
here is the one i use currently with the D02 1250LV kernel, it is nothing more than a simple text file which tells the setCPU app what are valid steppings/scaling so it cannot auto-detect incorrectly as it often does
http://dl.dropbox.com/u/12311939/setcpu.txt
all you have to do is edit it to the steps that match the kernel you load and drop it in the root of the sd card, then go into setCPU, hit softmenu to go to device selection, scroll down and choose custom or manual...i forget what its called...then scroll down to the bottom and tell it to use the setcpu.txt file option and restart....done, no more problems at boot with setCPU
I only use performance when benchmarking. I use on-demand day to day. Set to 1250 max 100 min. I actually read the entire setCPU dev page, I suggest you do also, keeping in mind the limitations of the kernel you choose to load. I do not use on-demand scaling. I do not use profiles either. I do however, after testing my own device, use "set at boot". Two things on that. 1. setCPU now has a safe mode feature to get out of a problem and 2. I also use the setcpu.txt option instead of auto-detect which is hit or miss. Using the setcpu.txt file method (be sure to go to device selection and choose the bottom custom option) setCPU cannot accidentally set itself to the wrong frequency, it gets it's allowed steppings from the file you create.
if you read the setCPU dev page you (not directed at you jt ) will learn all of this and also about the advanced settings....but they work fine as they are for my device/kernel/usage

jamesnmandy said:
not to contradict, but you dont have to use it, you can use the setCPU.txt file and i recommend it
here is the one i use currently with the D02 1250LV kernel, it is nothing more than a simple text file which tells the setCPU app what are valid steppings/scaling so it cannot auto-detect incorrectly as it often does
http://dl.dropbox.com/u/12311939/setcpu.txt
all you have to do is edit it to the steps that match the kernel you load and drop it in the root of the sd card, then go into setCPU, hit softmenu to go to device selection, scroll down and choose custom or manual...i forget what its called...then scroll down to the bottom and tell it to use the setcpu.txt file option and restart....done, no more problems at boot with setCPU
I only use performance when benchmarking. I use on-demand day to day. Set to 1250 max 100 min. I actually read the entire setCPU dev page, I suggest you do also, keeping in mind the limitations of the kernel you choose to load. I do not use on-demand scaling. I do not use profiles either. I do however, after testing my own device, use "set at boot". Two things on that. 1. setCPU now has a safe mode feature to get out of a problem and 2. I also use the setcpu.txt option instead of auto-detect which is hit or miss. Using the setcpu.txt file method (be sure to go to device selection and choose the bottom custom option) setCPU cannot accidentally set itself to the wrong frequency, it gets it's allowed steppings from the file you create.
if you read the setCPU dev page you (not directed at you jt ) will learn all of this and also about the advanced settings....but they work fine as they are for my device/kernel/usage
Click to expand...
Click to collapse
Contradict much?

Nice find there james
Im wondering what would happen if you didnt match the increments in your txt file to the kernels native ones?

Lol, I only speak of what I know to be true you guys have far more knowledge but I tested this on my own device and also used it on the ally I had so I know its good
Sent from my SCH-I500 using XDA App

Id say probably either fc or nothing. Either it would try to hit something it cant and fc or it would discard the step, but then the large jump sau from 200 to 600 skipping 400 may cause an issue
Sent from my SCH-I500 using XDA App

Well, if I can keep mine running stable for a couple of days, with no "permasleeps" then I will give start on boot a try. So far I'm having excellent luck with 1100 max 100 min with conservative. Set to auto, it brought the right figures up immediately. So far the thing is really running great with the 1100 LV kernal and the settings I mentioned above. I'm sure my quadrant will be lower than 1200, but for some reason the 1200 kernal was only stable when I was placing load on the device, actually using it. When it was idle the screen would "permasleep". Very odd. Stress testing on the 1200 LV kernal threw no errors, but I still had idle issues.

SirKronan said:
Well, if I can keep mine running stable for a couple of days, with no "permasleeps" then I will give start on boot a try. So far I'm having excellent luck with 1100 max 100 min with conservative. Set to auto, it brought the right figures up immediately. So far the thing is really running great with the 1100 LV kernal and the settings I mentioned above. I'm sure my quadrant will be lower than 1200, but for some reason the 1200 kernal was only stable when I was placing load on the device, actually using it. When it was idle the screen would "permasleep". Very odd. Stress testing on the 1200 LV kernal threw no errors, but I still had idle issues.
Click to expand...
Click to collapse
Maybe check out the 1200SV as well and/or jt's 1200. Heck I tried them all myself at least briefly

saps said:
Maybe check out the 1200SV as well and/or jt's 1200. Heck I tried them all myself at least briefly
Click to expand...
Click to collapse
The SV is working good so far, but where do you get jt's?

SirKronan said:
The SV is working good so far, but where do you get jt's?
Click to expand...
Click to collapse
Right here: http://forum.xda-developers.com/showthread.php?t=804317

Sorry if it is a noob question but
I have the jt's voodoo kernel and just restored my setcpu from the titanium back up...
the max that it gives me is only 1000000....
I thought It should change to 1200000
how can I change it?
if not what should I do to OC this bad boy?
btw I Used the recommended speed...
Thanks

Zirabius said:
Sorry if it is a noob question but
I have the jt's voodoo kernel and just restored my setcpu from the titanium back up...
the max that it gives me is only 1000000....
I thought It should change to 1200000
how can I change it?
if not what should I do to OC this bad boy?
btw I Used the recommended speed...
Thanks
Click to expand...
Click to collapse
Download the 1200 w/ boot animation. This happened to me last night when updating my wife's fascinate. I first downloaded the one without boot animation, which was fine, but only would clock to 1000 and was getting the battery not connected error. So I flashed the 1200 w/boot animation and fixed everything.

mackeydesigns said:
Download the 1200 w/ boot animation. This happened to me last night when updating my wife's fascinate. I first downloaded the one without boot animation, which was fine, but only would clock to 1000 and was getting the battery not connected error. So I flashed the 1200 w/boot animation and fixed everything.
Click to expand...
Click to collapse
Thanks works great now
Sent from my SCH-I500 using XDA App

mackeydesigns said:
Download the 1200 w/ boot animation. This happened to me last night when updating my wife's fascinate. I first downloaded the one without boot animation, which was fine, but only would clock to 1000 and was getting the battery not connected error. So I flashed the 1200 w/boot animation and fixed everything.
Click to expand...
Click to collapse
I just flashed my Fascinate with the 1200 w/ boot animation and then SetCPU from the market but SetCPU only allows my Max slider to 528MHz??? what did i do wrong?
Sorry for another noob question.

rickys08 said:
I just flashed my Fascinate with the 1200 w/ boot animation and then SetCPU from the market but SetCPU only allows my Max slider to 528MHz??? what did i do wrong?
Sorry for another noob question.
Click to expand...
Click to collapse
Think about it for a second... Has it sunk in yet? Didn't think so.
You changed speeds so you need to redetect your speed. Either do that or uninstall the app and reinstall it.
Sent from my SCH-I500 using XDA App

rickys08 said:
I just flashed my Fascinate with the 1200 w/ boot animation and then SetCPU from the market but SetCPU only allows my Max slider to 528MHz??? what did i do wrong?
Sorry for another noob question.
Click to expand...
Click to collapse
that happend too me too man,
what I did was I went to the menu and did an auto speed detect...
and the problem solved! its been running smoothly ever since

Set CPU Not Functioning

So, I guess I'll just C+P my post from the SetCPU thread since no one was able to answer the question there. I figure I might get some help from the EVO crowd since this might be specific to the device.
'So I have a wee bit of an issue with 2.0.4 I think... I just rooted my EVO 4G, installed SetCPU, AutoDetect, main Profile 768/460 set on boot. However, I rebooted and it says in the Notification bar that that's the profile it's running, however when I open up SetCPU the speeds jump between 245 and 998...Is SetCPU not throtleing the CPU correctly?'
Also, the only options for SetCPU I'm getting are userspace, ondemand and performance.
Is there something I did wrong when I rooted it?

What kernel are you using? The reason I ask is because I had the king #12 installed and setcpu didn't seem to be doing anything. Based on the the scaling options it sounds like a Toast kernel. Different kernels get different options. King kernels have about 5 different scaling options. I think for $29.95 he will add a 6th option.

Stock kernel. I haven't gotten around to messing with the kernel or ROM yet. Do I have to be running a modded kernel for SetCPU to function at all?

Shushunmire said:
Stock kernel. I haven't gotten around to messing with the kernel or ROM yet. Do I have to be running a modded kernel for SetCPU to function at all?
Click to expand...
Click to collapse
Well this is very simple then you can't OC the stock kernel. I also don't think that SetCPU can govern a stock kernel. You must flash either Toast or Kings..

SetCPU will govern a stock ROM, just hit menu on its main screen and select Disable Perflock. Disable the perflock and tell it to do so on boot. Then you can change the clock speeds around and profiles will work. Only downside is it still won't overclock, but if you are looking for power savings, this is the way to do it.

superlinkx said:
SetCPU will govern a stock ROM, just hit menu on its main screen and select Disable Perflock. Disable the perflock and tell it to do so on boot. Then you can change the clock speeds around and profiles will work. Only downside is it still won't overclock, but if you are looking for power savings, this is the way to do it.
Click to expand...
Click to collapse
Ya I didn't think you could use setcpu with a stock kernel so that's some good info right there.. thanks.

Thanks! That did it! I wasn't really liking the idea of flashing a custom ROM or kernel to my device just yet, so this is great. I had my fair share of issues with HD2 running custom ROMS and kernels and for now I want something that just works until I get more familiar with the process.

[Q] OVERCLOCKING: NOOB question. Gingerdx v010.

Apologies if the answer to this is already here (for newbies), but I've searched and searched and can't find an answer that makes sense to an amateur like me.
I have an X8, with Gingerdx v010 installed on it. I'd like to overclock it from 600 to around 690 (seems to be a nice stable o/c according to other threads).
My question is, how the hell do i o/c it? I've installed SetCpu but it won't let me go higher than 600. Does gingerdx not already come with an overclock module?
If anyone can help with a step by step instruction i'd be thankful. I don't know what 'push' something to somewhere means by the way - I'm a total newbie. I can root my phone, install a rom, and rescue my phone using SEUS. Everything else is new to me!
Thanks again
Impster.

download root explorer and oc module. copy oc module to your sd card. with root explorer, copy x8oc.ko from your sd card to /system/lib/modules. reboot your phone. set frequency with setcpu. you're done.

Many thanks for that. Didn't realise it was that easy/straightforward.
I'll give it a go tonight.
Thanks again. Much appreciated.
Impster the newbie.

oh i forgot - delete x8uv.ko from /system/lib/modules before rebooting your phone, if you will leave it there it might cause instability

Thanks for that. Just done it and rebooting now...
I'll check Setcpu once it's booted up to see what options i have.

right - rebooted. SetCPU shows that the phone's running at 710Mhz, although the sliders on SetCpu only go up to 600Mhz.
Surely this is not right? The sliders should show up to 710+ ???
Quadrant test also shows no real change at 930ish.
Thanks again in anticipation of your reply.
impster

impster said:
right - rebooted. SetCPU shows that the phone's running at 710Mhz, although the sliders on SetCpu only go up to 600Mhz.
Surely this is not right? The sliders should show up to 710+ ???
Quadrant test also shows no real change at 930ish.
Thanks again in anticipation of your reply.
impster
Click to expand...
Click to collapse
it should go past 710 (max to 826, but i'm not sure)
try to unninstal setcpu and install it again and reboot your phone, maybe it will help

Tried that. SetCPU slider still only goes up to 600.
But - installed CPUMaster and the slider on that goes up to 710.

Get v004 of the OC module and put it in system/lib/modules like fifo said. Go to hw_config and make sure this line is there
insmod /system/lib/modules/x8oc.ko # x8 overclocking
reboot and check SetCPU. Sliders should go up to 826 (I think)

Thanks for that. Sliders now go up to 825 as stated.
Thanks for all who helped.
I now have a rooted, Gingerdx, overclocked rom.
By the way, do I need to remove the x8uv module - some say they are running with both oc and uv modules?
Will the 2 together be in conflict at all?
Thanks

Im not sure. I dont overclock anymore cos games run perfectly smoothly and I have no lags scrolling/opening apps/switching between apps etc.
When I used to overclock, I had both uv and oc modules in lib/modules. Didnt have instability of any sort. Dont OC too high. 691-710 is good.
If you want to experiment, just rename your UV module (put .bak at the end or something) and see if there is a difference in performance

impster said:
Thanks for that. Sliders now go up to 825 as stated.
Thanks for all who helped.
I now have a rooted, Gingerdx, overclocked rom.
By the way, do I need to remove the x8uv module - some say they are running with both oc and uv modules?
Will the 2 together be in conflict at all?
Thanks
Click to expand...
Click to collapse
remove it, oc module already contains uv

I set the CPU to 748 mhz and i dont see a real difference, why?

Been playing about with settings - mine seems to run good at 710. Tried one step up and was ok, but occasionally rebooted itself.
Will stick with 710mhz for now as i've had one run on quadrant that got past the magic 1000!

Nyl94 said:
I set the CPU to 748 mhz and i dont see a real difference, why?
Click to expand...
Click to collapse
There isnt that big a difference. If your rom is already smooth you dont need to OC. I find my phone faster without it. Also keep in mind that overclocking has negative effects over time. Try deleting the OC module (or renaming), reboot and see if you feel your phone is smoother. OC module has undervolt for voltages below 614.

[Q] cpufreq parameters without using 3rd party apps

Hello.
I've got a stock Android 3.2.1 (A501 4.066.29 COM GEN1) rooted with Stock/HV/Taboonay V3.7 for HC 3.2 16-10 - 1.64Ghz/UV control kernel.
The question is:
how to set cpufreq parameters (governor, max_freq,..) WITHOUT using 3rd party apps so that the parameters were restored after reboot.
Thank you for reading this.

Either the kernel needs to support init.d scripts or a service needs to execute on boot.
That kernel doesn't support init.d and Voltage Control has a startup service.

CuriousTech said:
Either the kernel needs to support init.d scripts or a service needs to execute on boot.
That kernel doesn't support init.d and Voltage Control has a startup service.
Click to expand...
Click to collapse
Forgive my ignorance but I can't put to use your answer.
I don't get where is Voltage Control and what I have to do.

Get Voltage Control from the market, make adjustments, save as boot. You'll be given the option to save as init.d script or startup service.

Well.. I tested it. Odd app.
First of all it can see only one core. It's funny. After reboot cpu0 works in conservative mode, max_freq 1.4 GHz and cpu1 in ondemand mode, 1.0 GHz.
I tried to edit init.d script and add the 2nd core but after reboot cpu worked with the default kernel values - script didn't work at all.
Moreover Voltage Control shows voltages turned upside down - the less cpu frequency the bigger voltage values. I fear to use this app

Download setcpu or antutu cpu master it recognizes dualcore , has the boot option

More education would be advised To you PLEASE DONT BREAK YOUR TABLET
Please do not take this the wrong way..
it does sound like you do not know what your doing.. I suggest you read more about over clocking./under voltage of a TEGRA 2 DEVICE.. That will get you more understanding about what you need to do. And maybe even help you decide if you really want to do this or not.. There is alot of resources online about this subject. I have tried custom kernel with set cpu.. I use it on my 650 mhz phone. clock it to 768. but it has a huge battry issue when running at that speed.Not to mention It would be dangerous to leave it on my purse with something running might be a fire bug.. GOOD LUCK .

Basically lower voltage at higher frequencies keeps the CPU stable. Leaving it linear would increase temperature exponentially.
Script Manager can run scripts on startup but I don't know how you could disable them if they keep it from starting up.
I didn't know about VC and dual core though. My bad.

ef1x said:
Download setcpu or antutu cpu master it recognizes dualcore , has the boot option
Click to expand...
Click to collapse
Thank you.
I tried all cpu related apps from the Market that I was able to try. Now I want to try to get along without them.

erica_renee said:
Please do not take this the wrong way..
it does sound like you do not know what your doing.. I suggest you read more about over clocking./under voltage of a TEGRA 2 DEVICE.. That will get you more understanding about what you need to do. And maybe even help you decide if you really want to do this or not.. There is alot of resources online about this subject. I have tried custom kernel with set cpu.. I use it on my 650 mhz phone. clock it to 768. but it has a huge battry issue when running at that speed.Not to mention It would be dangerous to leave it on my purse with something running might be a fire bug.. GOOD LUCK .
Click to expand...
Click to collapse
Thank you Erica

I don't understand? You want something that does the same thing but you don't want to know it's there?
I found one app called System Tuner that lets you adjust CPU frequencies individually. I don't know why though.

CuriousTech said:
Script Manager can run scripts on startup but I don't know how you could disable them if they keep it from starting up.
Click to expand...
Click to collapse
Thank you but it looks too bulky for such a small task. And I still don't want to use 3rd party apps

CuriousTech said:
I don't understand? You want something that does the same thing but you don't want to know it's there?
I found one app called System Tuner that lets you adjust CPU frequencies individually. I don't know why though.
Click to expand...
Click to collapse
Actually I don't like how these apps work. And I thought that setting up a few parameters would't be difficult. It seems I was wrong.

Yep. Code has to execute to do stuff, otherwise that stuff doesn't get done.

System Tuner Pro allows voltage adjustments on overclock settings. If you're interested. Also, has a lot of packages integrated into one (task manager, app freezer, etc). They have a free version in the Market if you're interested. It's nice to have several apps, in one nice package.

Moscow Desire
Thank you but I actually don't need it anymore
I have rolled back to the stock kernel because of constant "sleep of death" issue.

huck_d said:
Moscow Desire
Thank you but I actually don't need it anymore
I have rolled back to the stock kernel because of constant "sleep of death" issue.
Click to expand...
Click to collapse
It's because the 3.7 kernel you used, is really not compatible with the a501. The ultra-low voltage causes "screen freeze" and the "sleep of death" when under 3g only. It's a known issue with the 501 and 3.6 and 3.7 kernels also. I would reccommend RTrips 3.4+. Probably his best for for a501.
I ship it with my own Alexandra II and III rom. No issues with it, and none ever reported.
Had I noticed when I woke this morning, you had an a501, I could have given this advice. Sorry, didn't have enough coffee
---------- Post added at 02:21 PM ---------- Previous post was at 02:18 PM ----------
Moscow Desire said:
It's because the 3.7 kernel you used, is really not compatible with the a501. The ultra-low voltage causes "screen freeze" and the "sleep of death" when under 3g only. It's a known issue with the 501 and 3.6 and 3.7 kernels also. I would reccommend RTrips 3.4+. Probably his best for for a501.
I ship it with my own Alexandra II and III rom. No issues with it, and none ever reported.
Had I noticed when I woke this morning, you had an a501, I could have given this advice. Sorry, didn't have enough coffee
Click to expand...
Click to collapse
The problem, is that a lot of dev's, don't have a501's, only a500's. So they really can't test a lot on it. And sometimes, the issue doesn't happen for 2 or 3 days. Sometimes less. I'm going to experiment a little this weekend, with some of the newer kernels, and mess with the voltage's and see if I can get it stabilized where it doesn't freeze on 3g only.

Moscow Desire ,
Thanks for clearing it up and the advise. I'll try either 3.4 kernel or your ROM.

huck_d said:
Moscow Desire ,
Thanks for clearing it up and the advise. I'll try either 3.4 kernel or your ROM.
Click to expand...
Click to collapse
If you go to RichardTrips kernel thread, you will see a link to his older kernels.
You will find the 3.4 listed on his server. I think you just need to flash it, although I usually dump Dalvak cache.
Alex II is an easy install. Alex III (3.2.1) is a little more ... interesting to install, but not difficult. If you run into an issue, post it in my thread. Everybody else has got it installed, so I think you'll have no issues either.
It's the only "certified" 3.2.1 for the Acer a501 that I know if. Not that the other roms are bad, because they really are good, but, the 3.2.1 they advertise, are from system dumps after running an update, or adding missing files to a 500 rom. The TMPL is an Acer release.

[Q] System Tuner Settings

You can search all you want and still come up short, I'm trying to use system tuner to change the cpu and gpu settings and I cant find any help on how to use this app. Im running the latest Kaos Droid rom for 4.1.2, the latest Motley kernel and twrp, props to all developers:good:. Im looking for what the optimal settings are and how to use system tuner to change them. Can someone tell me or show me the right thread that can help? Im not sure what the min/max cpu settings should be and I cant seem to find where to change the gpu settings. We are all noobs at some point. I just want to beef my nexus up a little, nothing crazy.

aww for real?

I wouldn't use system tuner for this because it doesn't have the ability to change the GPU speed. I'd recommend TricksterMOD which is available here for free. Depending on your kernel (not sure if motley's kernel has configurable GPU now, it didn't when I used it) you can change different settings. It is personally up to you how you want to configure your device and change things depending on how it runs. Anyway, I'll give you an idea of my settings that I have changed.
CPU - Governor is Interactive (my kernels default but another alternative would be ondemand) running @ 102mhz min - 1600mhz max
IO - Governor is deadline (again default but imo the only one you should use) with cache at 1024.
GPU - 600mhz
VOLTAGES - My kernels defaults.
Make sure that you set the settings to be applied at boot (I use a delay of 1 because it didn't seem to apply without it) and also make sure your kernel has the powerHAL fix included, or else (in the case of trinity kernel) you will need to download this file (this is for Android 4.2.x). This will allow your CPU overclock to stick and not be reset to stock.
Hopefully this helps! But again, just play around with your frequency's and maybe look into voltage tweaking to get your personal balance between performance and power consumption. And if you are going for performance, I'd look at turning off fsync and using the ext4 mount script to boost your I/O dramatically (this will result in things such as faster app installs)

smt8544 thanks alot man! now I can start somewhere, I didnt wanna do anything stupid without some knowledge, I appreciate it!