i've got HyperDroidGBX-v11 and i have only 150mb. i've installed recovery_250M but after installing that rom there is still 150mb. i need some help with this issue. please explain that very simply what to do. THX.
i think you misunderstand how it works, the 250 is the amount of space neeed on nand to install the rom, whats left is the 150
after i've installed HyperDroidGBX-v11 i go to storage settings and i've got there total space: 151mb and available space 118mb. after android restores all my programs i have only 40mb free space and after 1-2 weeks i've no storage space. i'd like to have about 100mb more for programs.
sounds about right if you are installing apps on the internal nand but it does say to use a 150CWM partition not a 250, that should gain you an extra 100meg straight off
i don't understand exactly what do you mean. can you just tell me how can i get more storage for apps please? is it possible at all?
you are using the wrong partition size for thew rom!!! you are lsoing 100meg by using the 250CWM you need a 150CWM as per the rom instructions...reflash using a 150CWM partition size and you will more free space
also sounds like you dont have an ext3/4 partition for use of a2sd
ok. i've changed recovery_250M to 150M and i have 67mb more. what is going to happen if i change 150M to 100M? do i get an extra 50mb free space?
bulla666 said:
ok. i've changed recovery_250M to 150M and i have 67mb more. what is going to happen if i change 150M to 100M? do i get an extra 50mb free space?
Click to expand...
Click to collapse
The ROM probably wont load if you use a partition lower than recommended then you will have more problems. If you follow directions of the developer you will be fine.
bulla666 said:
ok. i've changed recovery_250M to 150M and i have 67mb more. what is going to happen if i change 150M to 100M? do i get an extra 50mb free space?
Click to expand...
Click to collapse
no
10 char limit
akapaul26 said:
The ROM probably wont load if you use a partition lower than recommended then you will have more problems. If you follow directions of the developer you will be fine.
Click to expand...
Click to collapse
Directions by dertester123
http://forum.xda-developers.com/showpost.php?p=11189394&postcount=1826
thanks guys. now i know how it works. i've had that before Eelkede but i didn't know why i have to change size to lower but now i understand, so everything is clear thanks!
I personally use the 100meg recovery size as the system size for v11 is very small have not ran into any problems. I believe he uses the 100meg file and recommends it.
Sent from my HTC HD2 using XDA App
Hi, I am using MIUI with Android version 2.3.7. Everything is allright, but I only have 217 mb of internal memory in total. The MIUI ROM and other apss take up about 180 mb and although I have moved some apps to sd I now only have 40 mb available. It should have 512 mb internal memory. Why can't I see and use all of it? Is it possible that I didn't delete windows mobile or one of the other android roms I have used so far, though I am sure I have tried "clean install" a few times?
Dalvik cache & app data take up a lot of space too, you could move these to th SD ext partition to free up more internal memory. You will need a2sd installed I think to enable this.
Peace
Sent from my HD2
the 'available internal memory' figure only counts the data partition size.
so (for example) if your rom requires a 200 meg system partition, you would show..
512 minus 200 minus whatever cache size you flashed minus the boot and recovery partitions (lets guess 50 meg) so your available internal memory on a completely fresh install, no data or apps, would still only show a max of 262meg available.
Also, if you flash a system partition bigger than required, you dont get the extra space to use. So flash a 180meg rom onto a 250 meg system partition, and you lose 70meg, the system wont use it for anything.
samsamuel said:
the 'available internal memory' figure only counts the data partition size.
so (for example) if your rom requires a 200 meg system partition, you would show..
512 minus 200 minus whatever cache size you flashed minus the boot and recovery partitions (lets guess 50 meg) so your available internal memory on a completely fresh install, no data or apps, would still only show a max of 262meg available.
Also, if you flash a system partition bigger than required, you dont get the extra space to use. So flash a 180meg rom onto a 250 meg system partition, and you lose 70meg, the system wont use it for anything.
Click to expand...
Click to collapse
Thank you so much. My ROM itself is about 100 mb. How much data partition size should I actually spare for such a rom? Also could you please direct me to the post that tells me how to arrange the data partition size and do the rest of flashing my rom again? I would really like to have more available internal memory. Also I would be happy if you told me what ext 3 or ext 4, whatever it is called, is and if it has anything to do with internal memory.
If the rom is 100mb then you need a partion of at most 110 so if your using clk or magdlr..after you have wiped nand...partition it to 110 if possible or use 105 even cos you don't wanna be giving up wanted space..
Hello everyone! Yesterday, I tried to flash the new ICS CM9 and I did it. It is laggy and I can t install GAPPS.Then i saw that my system partition is 160 mb instead of 215 (recommended).
So, how can I change my system partition from 160 to 215 ? (I tried some TPT Gen2 tutorials, but nothing).
Thanks!
stanangel said:
Hello everyone! Yesterday, I tried to flash the new ICS CM9 and I did it. It is laggy and I can t install GAPPS.Then i saw that my system partition is 160 mb instead of 215 (recommended).
So, how can I change my system partition from 160 to 215 ? (I tried some TPT Gen2 tutorials, but nothing).
Thanks!
Click to expand...
Click to collapse
ok first go to market and download tpt helper.
then choose make your own tpt fill chache as 20 mb system(dont make it less it is recommended to use 20 mb on ics) as 210 mb(or as per ur choice but not less) and rest will be system.then click ok.
it will download the tpt and edit it accordingly.then check it it should have from the app there should be 10/12 matches.
then reboot.
press menu+power+vol up then green text fill flash and tpt will start on its own.
if there is a error at 99% down worry wait and then it will be success.
u r done.
just remember to have a rom on your sd.
there will be other options like choosing splash screen, recovery etc choose accordingly in the app.
u can even use your nandroids.
remember to delete image folder from sd after flash to prevent flashes by mistakes.
u r done enjoy
thanks saaransh9 i also want this info, voted up
sorry, but my number of matches is 1/1 .It is all right?
stanangel said:
sorry, but my number of matches is 1/1 .It is all right?
Click to expand...
Click to collapse
When u set your partitions does it says finished if yes then it should be ok.
Or just TPT with the 220mb system partition version, reinstall your rom and you're done
Rastaman2302 said:
Or just TPT with the 220mb system partition version, reinstall your rom and you're done
Click to expand...
Click to collapse
yes u can do that but the stock has 20 or 30 mb oem space which is a waste instead i get 210 mb system 210 data and 20 mb cache when i made my own tpt
How to check system partition???
Sent from my Blade using xda premium
rohitzz said:
How to check system partition???
Sent from my Blade using xda premium
Click to expand...
Click to collapse
You can use this.
Hi to all, I am new at all this android stuff, so I hope you won't laught, but I have few questions.
1.Is there a way to change size of partitions without flashing new rom?
2.How big the partitions should be (System, Data, Cache) ?
According to "Blade Checker" I have European ZTE Blade 512MB, Gen2 phone, also it said that I have to use image.bin style TPTs.
Curent partitions are:
System 220MB
Data 160MB
Cache 37MB
It is running CM 7.1 stable mod and Clockwork Mod Recovery 5.0.2.0
Thanks in advance, and I am sorry if I posted at a wrong place.
ZeChe said:
Hi to all, I am new at all this android stuff, so I hope you won't laught, but I have few questions.
1.Is there a way to change size of partitions without flashing new rom?
2.How big the partitions should be (System, Data, Cache) ?
According to "Blade Checker" I have European ZTE Blade 512MB, Gen2 phone, also it said that I have to use image.bin style TPTs.
Curent partitions are:
System 220MB
Data 160MB
Cache 37MB
It is running CM 7.1 stable mod and Clockwork Mod Recovery 5.0.2.0
Thanks in advance, and I am sorry if I posted at a wrong place.
Click to expand...
Click to collapse
1. No,you cannot.
2.Your partition size is more than enough for any new ROM's. Minimum System partition size varies accordings to different ROM's. Minimum data is according to your needs for app storage. Minimum cache is 20mb,but keep in mind you can't download anything from market/play over 20mb. So cache decides your temporary market storage.
Sent from my ZTE Blade using XDA app
I have only 20-25Mb left on data partition, that's what bugs me.
Was thinking maybe to increase Data prtition or maybe install 4GB class 10 sd card I have and try to make EXT partition on it, 2GB I have now seems a bit slow for that.
Would one of thos things help?
Thanks.
ZeChe said:
I have only 20-25Mb left on data partition, that's what bugs me.
Was thinking maybe to increase Data prtition or maybe install 4GB class 10 sd card I have and try to make EXT partition on it, 2GB I have now seems a bit slow for that.
Would one of thos things help?
Thanks.
Click to expand...
Click to collapse
You better get a 4 or 8 Gig card. Class 4 should do actually.
You've tried A2SD right?
Sent from my ZTE Blade using XDA app
karthiknr said:
You better get a 4 or 8 Gig card. Class 4 should do actually.
You've tried A2SD right?
Sent from my ZTE Blade using XDA app
Click to expand...
Click to collapse
No, actually I didn't tried A2SD, I think, I am using App 2 SD, free version, but I assume that's not the same, also I think that my card has only one partition.
As I said, am new to all of this.
Sorry for bothering you and I really appreciate the help.
Thanks, again.
ZeChe said:
No, actually I didn't tried A2SD, I think, I am using App 2 SD, free version, but I assume that's not the same, also I think that my card has only one partition.
As I said, am new to all of this.
Sorry for bothering you and I really appreciate the help.
Thanks, again.
Click to expand...
Click to collapse
A2SD gives u lots of space. I have a 4 gig SD card with a 1 gig partition and I've 300 apps installed
Here's how u do it
-backup ur SD card
-boot into recovery
-select advanced
-partition SD card
-select size. recommended 1gb
-select swap size as 0. Select 32 if u use it for gaming
-reboot
-install s2e
-check all four boxes
-reboot
-start installing apps
(Tested with gingerbread roms)
ZeChe said:
Hi to all, I am new at all this android stuff, so I hope you won't laught, but I have few questions.
1.Is there a way to change size of partitions without flashing new rom?
2.How big the partitions should be (System, Data, Cache) ?
According to "Blade Checker" I have European ZTE Blade 512MB, Gen2 phone, also it said that I have to use image.bin style TPTs.
Curent partitions are:
System 220MB
Data 160MB
Cache 37MB
It is running CM 7.1 stable mod and Clockwork Mod Recovery 5.0.2.0
Thanks in advance, and I am sorry if I posted at a wrong place.
Click to expand...
Click to collapse
If you changed your partition sizes, your rom and all your data would be wiped. If you made a backup before, you could restore it afterwards as long as it could fit in the new sizes (eg. if your rom took up 160MB in system just now, and you changed system to 170MB then it would fit so you could restore it, same for other partitions).
Size for the partitions depends on what rom you are wanting to install. Some like Swedish Snow can fit in 128MB system, others like the ICS ones need ~180MB or bigger.
As your current layout is big enough for any rom out now, you'd be better making an ext partition on your phone and using that. S2E from Google Play works well with CM7 and lets you move most, if not everything, on the data partition to the ext partition. Its usually best just to move apps, but it means you can have loads of space. You can choose the size of ext partition depending on how big your sdcard is and how much space you need.
karthiknr said:
2.Your partition size is more than enough for any new ROM's. Minimum System partition size varies accordings to different ROM's. Minimum data is according to your needs for app storage. Minimum cache is 20mb,but keep in mind you can't download anything from market/play over 20mb. So cache decides your temporary market storage.
Sent from my ZTE Blade using XDA app
Click to expand...
Click to collapse
2MB is the minimum for cache. You can redirect the market downloads to data/ext partition/somewhere else, so you can download any app you like. Most roms do this automatically if your cache partition is small. By making it bigger than 2MB, you are either wasting the extra space if its still small enough to be redirected, or you are restricting the size of apps you can download if its too big to be redirected.
Amphoras said:
If you changed your partition sizes, your rom and all your data would be wiped. If you made a backup before, you could restore it afterwards as long as it could fit in the new sizes (eg. if your rom took up 160MB in system just now, and you changed system to 170MB then it would fit so you could restore it, same for other partitions).
Size for the partitions depends on what rom you are wanting to install. Some like Swedish Snow can fit in 128MB system, others like the ICS ones need ~180MB or bigger.
As your current layout is big enough for any rom out now, you'd be better making an ext partition on your phone and using that. S2E from Google Play works well with CM7 and lets you move most, if not everything, on the data partition to the ext partition. Its usually best just to move apps, but it means you can have loads of space. You can choose the size of ext partition depending on how big your sdcard is and how much space you need.
2MB is the minimum for cache. You can redirect the market downloads to data/ext partition/somewhere else, so you can download any app you like. Most roms do this automatically if your cache partition is small. By making it bigger than 2MB, you are either wasting the extra space if its still small enough to be redirected, or you are restricting the size of apps you can download if its too big to be redirected.
Click to expand...
Click to collapse
I stated 20mb as minimum because Tilal recommended 20mb for ColdFusion and I would rather change partition sizes once than doing it repeatedly.
Sent from my ZTE Blade using XDA app
Well, I did few things.
I did what QuantumFoam suggested, partitioned my old 2GB card that was already in phone, created EXt partition of 512MB, to try if it work. I'we made backup on PC, but when I rebooted few of apps I had on sd desapeared, also all my music, pictures, wallpapers and other stuff.
Question I have now is should I copy all the things from PC back to SD and where.
Thanks all of you guys for helping me and having so much patience with me.
karthiknr said:
I stated 20mb as minimum because Tilal recommended 20mb for ColdFusion and I would rather change partition sizes once than doing it repeatedly.
Sent from my ZTE Blade using XDA app
Click to expand...
Click to collapse
That's because ColdFusion didn't have the redirect script added yet. If you add that, then 2MB is fine for it as well.
ZeChe said:
Well, I did few things.
I did what QuantumFoam suggested, partitioned my old 2GB card that was already in phone, created EXt partition of 512MB, to try if it work. I'we made backup on PC, but when I rebooted few of apps I had on sd desapeared, also all my music, pictures, wallpapers and other stuff.
Question I have now is should I copy all the things from PC back to SD and where.
Thanks all of you guys for helping me and having so much patience with me.
Click to expand...
Click to collapse
I think creating the ext partition formats the whole card. If you plug your phone into your pc and turn on usb storage, you should see it appear with ~1.5GB space. You can copy all the stuff back onto there and it should work again. You might have to reinstall the apps that were moved to the sdcard, don't know if just copying them back will work.
Amphoras said:
I think creating the ext partition formats the whole card. If you plug your phone into your pc and turn on usb storage, you should see it appear with ~1.5GB space. You can copy all the stuff back onto there and it should work again. You might have to reinstall the apps that were moved to the sdcard, don't know if just copying them back will work.
Click to expand...
Click to collapse
I did that, reinstalled few apps and it works, thx.
Have one more question, if you all don't mind
I know that these questions sound stupid, but as I said, I'm new to all of this and have a strong will to learn.
Is it possible to switch this card with bigger one I have, without flashing ROM again?
If it is, I would apritiate If someone could point me to some guide, because I presume it is not easy task and I think I bothered you enought already.
If it isn't possible, can I then format new card on my PC,copy ROM on it, partition it from CM recovery and then install ROM and all of the apps?
Thx again
i have installed coredroid for the hd2 useing the great tool kit.. one thing i have incountered is i can not use a custom partition over the max 445mb. the US version can use 1024mb internal rom and 512 ram anyway to work around this or am i looking at this wrong...
biowin said:
i have installed coredroid for the hd2 useing the great tool kit.. one thing i have incountered is i can not use a custom partition over the max 445mb. the US version can use 1024mb internal rom and 512 ram anyway to work around this or am i looking at this wrong...
Click to expand...
Click to collapse
I don't see why you would need a larger partition but an easy solution is to go to the HD2 CWM thread and download the latest version, then within the downloaded folder open the file flash.cfg (not flash.cfg.txt) and change the system partition to your desired size, then flash through daf.exe
Sent from my HTC HD2 using XDA
biowin said:
i have installed coredroid for the hd2 using the great tool kit.. one thing i have incountered is i can not use a custom partition over the max 445mb. the US version can use 1024mb internal rom and 512 ram anyway to work around this or am i looking at this wrong...
Click to expand...
Click to collapse
to explain, in case you didn't realise, , making the system partition bigger than that rom requires is pointless, since the system doesn't store anything in the system partition, except the system. The data partition (and sd-ext of in use) is where all your apps and data get installed. If you make your system partition 100mb bigger, for example, your internal storage will actually go down by 100meg.
When you partition, the data partition is set to 'allsize', meaning it will take up however much space is left after the boot/cache/recovery partitions are created.
When you look at the available internal storage space in settings, it ONLY shows you the space in your data partition, nothing else, which is why it will never show 1024mb, more like 800mb for a cm rom, or 550mb for a sense rom.
thanks
thanks for the info.. sorry for the delay in the reply
Hello guys i have a T-Mobile HD2. And i know its has 1 gb rom.But the toolkit for hd2 supports only 450 mb max partition. How can i make it 1 gb? Thanks,,
no one knows :/
that 450 is the system partition only, if you made a 1gb system partition, you wouldn't be able to install anything, and you would waste a heap of space. when you setup the partition layout, anything left over becomes the data partition. so a 450 meg partition layout would leave about 550meg as the data partition for your user data, apps and such like..
Also, there's no point making the partition bigger than you need, ,if you flash a 200meg rom to a 450meg layout, you will lose the 250meg difference, it wont be used by the data partition, it will be wasted space.
engineerr said:
Hello guys i have a T-Mobile HD2. And i know its has 1 gb rom.But the toolkit for hd2 supports only 450 mb max partition. How can i make it 1 gb? Thanks,,
Click to expand...
Click to collapse
You can use clk1.5 to increase the system partition to that size in settings>repartition.
samsamuel said:
that 450 is the system partition only, if you made a 1gb system partition, you wouldn't be able to install anything, and you would waste a heap of space. when you setup the partition layout, anything left over becomes the data partition. so a 450 meg partition layout would leave about 550meg as the data partition for your user data, apps and such like..
Also, there's no point making the partition bigger than you need, ,if you flash a 200meg rom to a 450meg layout, you will lose the 250meg difference, it wont be used by the data partition, it will be wasted space.
Click to expand...
Click to collapse
Oh i see so if i put 200 mb rom then the rest 800 mb i will be able to use
hengsheng120 said:
You can use clk1.5 to increase the system partition to that size in settings>repartition.
Click to expand...
Click to collapse
Thanks i will try
engineerr said:
Oh i see so if i put 200 mb rom then the rest 800 mb i will be able to use
Click to expand...
Click to collapse
Correct.