Related
Hello.
This is where you can look at the tutorial and get the files to install if you feel like jumping into it ...
ICS Step by step and files
Note: if you do flash this and it hangs at the boot screen, pull the battery and flash it again and it should work. Some have had to do it 3 times.
I take no credit for this ROM and full props go to the developers of the above post and all those working to make this happen.
First the look and feel of ICS is nothing short of superb. The speed as of now is similar to all the other ROMS I have tried with a little chop here and there but nothing major.
Yes lots of little issues and items that do not work like the camera and GPS but not a huge deal for me so I am willing to stick to it.
Battery so far is decent. 13 hours and 43 min. on the first charge to calibrate and sitting at 24% still. This included allot of playing with the phone and reboots to test jigs
As for the issues that are somewhat bothersome, they include the following.
1. No home or search button. I know same as usual when installing an i9000 ROM but the key mappings from the GB ROMS does not work.
2. BLN (issue all around) will remain lit until you wake the phone to get the notification.
3. They had to do some funky stuff to get 3G to work so it lags to start. Not a huge deal cause it does start and remain working.
I will be continuing to use this ROM and hopefully everything will be working soon (these guys are flying. Also I have been told that the folks over at Glitch are already working on the kernels for the ICS port so that is promising as well.
If there are any other out there running this on our phone chime in with your thoughts or fixes if you have any.
Thanx
Bucky
Thanks for starting this thread. Can't wait to hear about your progress.
Alpha 7
Hey here is the update ...
Installed the Alpha 7 update today and I have to say this rom is fantastic.
1. Camera is fixed and works like a charm.
2. GPS locked in seconds and accurate indoors!! Big improvment over all other roms I have used.
3. HW Acceleration is fixed and working from what I can tell
4. You Tube is fixed and can watch video
Still on the not working list
1. Can not plug the phone in while off as it just restarts. this is a work in progress and known issue
2. Can not record video
3. Will not read a SIM card for contacts and so on (thank god for Google sync)
4. Still no home or search buttons (I think I may need to work on that on myself unless a kernel is released)
SO my review so far ...
No real issues with the general use of the phone. Text, phone, email and web are solid, I have installed apps from the market with no issues and not one FC yet. Battery life is good and nothing is taking over. I have been able to use the phone all day and still have lots left over before going to bed and plugging in. I have not been through a full battery as of yet but that is what I am working on now.
Memory - Last I looked I had 174MB of memory remaining which is the highest I have seen.
ICS is really smooth and fast while moving around. I am going to continue to play with it and report back here for everyone.
I don't use a whole lot of apps so there won't be much regarding those.
Thanx for stopping by and I will post pics when I can.
Bucky
Nevermind
Sent from my SCH-I500 using XDA App
Thanks for the update. From your review, it sounds like an awesome rom. Can't wait to try it but need them to fix the video recording first. Although I might just cave and try it out just to see what the fuss is all about
Can always restore my current setup... lol.
Update ...
been getting the SOD today and not sure why, I mentioned above that the HW acceleration was working, I misunderstood and it is not fully working yet.
I found that the system partition is very small. There was an update which required copying libs and there was not enough space left to do this (2MB). Not too sure if this is due to coming from MIUI or just a ROM issue.
Alpha 8 was released but had quite a few issues so not flashing that one.
Daily use has been great so far (except for the SOD) with no reception or data issues.
I am still working on the home and search buttons but I think that will get fixed with a kernel update. I tried the keymap file but these buttons do not even register in recovery so I get nothing in the ROM either.
More to come ...
Haven't tried this (likely won't as I need the phone for work) but buck have you tried the manual key fix - some directions in our thread on putting on Darkys 10.3.
Sent from T959D running Miui
Yup been there done that no go
Sent from my GT-I9000 using XDA App
Hey buck , was doing some searching in teamhacksung's thread about their ICS port, and someone suggested to change the following and then the key mapping for our phones will work properly. Not sure if the file system is the same for both, but definitely a bit of info if it isn't!
All you have to do is change this part on**arch/arm/mach-s5pv210/mach-aries.c*
*Original**(line 1216~1221)
static const int touch_keypad_code[] = {
#if defined (CONFIG_SAMSUNG_GALAXYS) || defined (CONFIG_SAMSUNG_GALAXYSB)
KEY_MENU,
KEY_BACK,
*0,*
*0*
----------------------------------------------------------------------------*
*Edited*
static const int touch_keypad_code[] = {
#if defined (CONFIG_SAMSUNG_GALAXYS) || defined (CONFIG_SAMSUNG_GALAXYSB)
KEY_MENU,
KEY_BACK,
*KEY_HOME,*
*KEY_SEARCH*
Sent from my GT-I9000 (T959 mod) using XDA App
Thank for the input. After flashing bata 1 all the buttons are working. More to come: )
Sent from my GT-I9000 using XDA App
Hey, have a telus fascinate too. Know how to flash and all that fun stuff. Just don't fully follow where you make the changes for key mapping...if you could just guide me in the right direction, I can figure the rest out...
changes in the kernel zip? the beta zip? after flashing? something completely different?
thanks a lot!
There are no changes to be made with this ROM, they are built in. Just flash and all good.
I will post update tonight after work.
Sent from my GT-I9000 using XDA App
yeah sorry realized that immediately after posting / flashing to the new rom.
have you tried out BT audio? I can connect to different devices but audio won't stream
havoksupertwit said:
yeah sorry realized that immediately after posting / flashing to the new rom.
have you tried out BT audio? I can connect to different devices but audio won't stream
Click to expand...
Click to collapse
There are allot of BT related posts in the QA. I personally do not use any BT but I do have a headset that I will try when I get home.
Seems to be a battery drain issue too as my phone is now dead but I have not calibrated so we will see after I do that.
bucknetbucky said:
Seems to be a battery drain issue too as my phone is now dead but I have not calibrated so we will see after I do that.
Click to expand...
Click to collapse
Calibrated my phone this morning. Heavy use today configuring everything but about 52% now (sooo 5 hours or use?)
Why god! Whhyyy!!
bucknetbucky said:
There are allot of BT related posts in the QA. I personally do not use any BT but I do have a headset that I will try when I get home.
Seems to be a battery drain issue too as my phone is now dead but I have not calibrated so we will see after I do that.
Click to expand...
Click to collapse
AT LEAST YOU GUYS HAVE IT RUNNING!!
I am having a hell of a time trying to get it to work. I have tried so many different ways to get it up and running but no luck.
I've tried installing it from MIUI 3 times but all I get when trying to boot into ICS for the first time is a Black Screen after the FuguMod boot screen.
The funny thing is that the 4 soft buttons at the bottom light up still.
So I then decided to try the JVT way:
-Flashed JVT DARKYROM (ODIN)
-Lagfix OFF
-FULL WIPEs (factory reset, cache, dalvik)
-FLASHED CM7.1 STABLE
-FULL WIPEs (factory reset, cache, dalvik)
-Flash ICS BETA1
-Flash kernel
-FOR THE SECOND TIME:
-Flash ICS BETA1 AGAIN
-Flash kernel AGAIN
Same issue, black screen after the FuguMod boot screen, buttons still light up.
So i tried a couple more times in a few different ways based off what I have already tried, but this time, before booting into ICS for the first time, I installed the 'Superuser-3.0.6-efgh-signed.zip' package.
Same issue. I'm not having any luck here.
iwebsource said:
AT LEAST YOU GUYS HAVE IT RUNNING!!
I am having a hell of a time trying to get it to work. I have tried so many different ways to get it up and running but no luck.
I've tried installing it from MIUI 3 times but all I get when trying to boot into ICS for the first time is a Black Screen after the FuguMod boot screen.
The funny thing is that the 4 soft buttons at the bottom light up still.
So I then decided to try the JVT way:
-Flashed JVT DARKYROM (ODIN)
-Lagfix OFF
-FULL WIPEs (factory reset, cache, dalvik)
-FLASHED CM7.1 STABLE
-FULL WIPEs (factory reset, cache, dalvik)
-Flash ICS BETA1
-Flash kernel
-FOR THE SECOND TIME:
-Flash ICS BETA1 AGAIN
-Flash kernel AGAIN
Same issue, black screen after the FuguMod boot screen, buttons still light up.
So i tried a couple more times in a few different ways based off what I have already tried, but this time, before booting into ICS for the first time, I installed the 'Superuser-3.0.6-efgh-signed.zip' package.
Same issue. I'm not having any luck here.
Click to expand...
Click to collapse
OK so here is what I did ...
Started from MIUI 1.11.18
1. Do a nandroid backup
2. download all the files to the SD card. This includes the ROM, Kernel and super user fix
Links:
Kernel:http://ice-cream-sandwich-sgs.googlecode.com/files/FuguModICS_GT-I9000_update.zip
ROM:http://ice-cream-sandwich-sgs.googlecode.com/files/ICS_4.0.1_r1-Beta1-i9000.zip
Super User:http://ice-cream-sandwich-sgs.googlecode.com/files/Superuser-3.0.6-efgh-signed.zip
3. Boot to recovery and do factory reset, wipe cache and davlik cache
4. Install the Kernel first and reboot now
5. Boot into recovery factory reset and wipe cache and Davlik and Install the ROM then reboot now
6 Boot back to recovery and install the Kernel again with out the wipe
7. If after reboot you do not have root then boot to recovery and flash super user fix
8. reboot and it should be working at least it was for me
It seems to me that you are missing the first flash of the kernel before the ROM. It sets up the file system from what I gather
Note: If needed flash the kernel and rom then kernel again with all the wipes as mentioned above.
I know there are allot of folks having issues getting it to run. Not too sure if it was the way I installed MIUI that might have made the difference.
My battery is charging now so I can calibrate it and see how it goes after that (it drained pretty quick today) lol.
I hope you can get it going cause it truly is awesome
Still not working:
Can not charge with the phone off
Google TTS stops working
Phone will not vibrate for SMS or email when in silent mode
BLN stays on for notifications until the phone is taken out of sleep (can be turned off)
Compass is why off (have not attempted to calibrate yet though)
11 MB left in the system partition (not much but I do not think there will be many changes there)
Video play back is choppy and some will not play
Bucky
regarding the black screen:
- had that too... I let it sit on the black screen for 2-3 minutes and then it went to the boot screen animation (a multi-coloured )...that for a few minutes...then finally booted.
How i got it working:
a) Started on MIUI...booted into clockwork
b) Backup
c) Wipe data / factory reset and cache and dalvik cache
d) Install rom and then kernel
e) Restart
f) Install rom and then kernel
g) Restart and wait very patiently for a little while
h) Once it all works, can reboot into clockwork and install superuser
Good luck! I really think the rom is nearly stable enough for daily use...
-------
Also have the no vibrate on silent... haven't tried the other stuff yet.
Oh and TTS hasn't crashed on this version yet for me...
Astrid glitches a little to a lot.
Changing from google tts to picco tts solves the problem there. As for the other stuff it is all reported as known.
I am using as a daily on my phone and no issues with general use. Still testing battery and that seems to be a bit of an issue with regard to Android OS as usual
Sent from my GT-I9000 using XDA App
So to install this ROM I would just have to install it as per totallydubbed's instructions? I don't want to flash miui if I don't have to to try this out.
Sent from my GT-I9000 (T959 mod) using XDA App
Greetings,
The camera on my Note 3 is not working for video recording (taking pics works fine). I have switched a lot of roms and kernels on it, but I noticed the camera app would not record and, instead, show me a "Warning: Recording Error" followed by a force close and, usually, a reboot.
I decided to switch back to stock Lollipop to see if this would revert it, but it didn't work.
The phone specs and other info:
SM-9005
Currently on official Lollipop from Brazil (N9005VJUGBOD5_N9005ZTOGBOD4_ZTO from sammobile)
Stock kernel
These are the things I did to try and fix this, not in order:
1- Changed kernels
2- Changed roms (always wiping everything but internals on recovery before doing so)
3- Cleaned cache
4- Cleaned camera cache
5- Tried google camera app instead of the official camera app (it did not FC, but while it said it was recording, it would never save a video file of it)
6- Did a factory reset on the stock rom
7- Updated modem and bootloader with the files on the Aryamod thread
8- Tried removing the SD card completely
9- Tried reseating the SD card
10- Tried changing to internal card in the camera app
11- Changing recording resolution options
Last custom rom I had was the Omega Rom. First Lollipop rom I installed was the official (non leaked) Poland rom, and I did not use a pit file back then (as, according to the thread this was featured it, that file was meant only for users coming from the leaked lollipop rom).
This is the log from the camera bugging out in the Omega Rom:
http://pastebin.com/TkCA2KbT
I took a second one for precaution:
http://pastebin.com/1exMLTk3
This is not a hardware problem as it worked on KK. The problem persists on the official rom I just installed. Also, the SD card has a lot of space available, as does the internal memory.
Also, not sure if this is relevant, but most kernels give me a bootloop, exception being the Omega kernel and the Darkqueen. I also *may* have flashed by accident a rom based on Cyanogen at some point, but my memory is very fuzzy on this. I think that this wouldn't matter as I wipe everything before putting a new rom in, anyway (and if I did that, the new and now correct rom I put after that wouldn't leave any traces of this accident).
I have no idea what else to do to fix this.
I have exactly the same problem. I have a ZTO Note 3 with the same problem as well, sometimes the whole android crashes after I try to record it.
The whole problem began after I installed the Omega Rom, I used CM12.1 for quite some time and the camera record correctly. I am not sure if you managed to wipe the whole thing by using the TWRP, but once I did, I found out that it was a MTO problem, which I searched about and it was nothing major.
Did you manage to fix the problem?
Maybe install latest bootloader?
Try changing the camera app video resolution back to 1080P - there's been a number of people had problems with UHD mode.
It's quite possible that BL and Modem flash will not work unless you turn the phone off and then go into DL mode for an Odin flash - rebooting into DL mode doesn't let them flash. So maybe once you went to a ROM that had the UHD issue, you haven't fully come back to stock?
Journyman16 said:
Try changing the camera app video resolution back to 1080P - there's been a number of people had problems with UHD mode.
It's quite possible that BL and Modem flash will not work unless you turn the phone off and then go into DL mode for an Odin flash - rebooting into DL mode doesn't let them flash. So maybe once you went to a ROM that had the UHD issue, you haven't fully come back to stock?
Click to expand...
Click to collapse
white7561 said:
Maybe install latest bootloader?
Click to expand...
Click to collapse
Sorry for the time taken, I flashed the Omega Rom once again using TWRP, and then I flashed the bootloader and modem recommended for such rom using Odin, but the problem still continues. And I have tried change resolutions, storage and everything possible, the problem still continues.
Funny thing is, I thought it was the back camera problem, it could take photos but it freezes during video recording. Once I tried the front camera, the same problem happens as well, it does take pictures, but it does not record.
I am getting a little desperate now, I have a feeling that the omega rom made such problem but as of yet it did not fix said problem! What should I do?
Leminur said:
Sorry for the time taken, I flashed the Omega Rom once again using TWRP, and then I flashed the bootloader and modem recommended for such rom using Odin, but the problem still continues. And I have tried change resolutions, storage and everything possible, the problem still continues.
Funny thing is, I thought it was the back camera problem, it could take photos but it freezes during video recording. Once I tried the front camera, the same problem happens as well, it does take pictures, but it does not record.
I am getting a little desperate now, I have a feeling that the omega rom made such problem but as of yet it did not fix said problem! What should I do?
Click to expand...
Click to collapse
Hi, I have the same problem on my note 3 and the only way to fix its installing the kernel civato v2.2 .(only work with v2.2)
i hope work for you.
---------- Post added at 04:45 AM ---------- Previous post was at 04:40 AM ----------
Hi, I have the same problem on my note 3 and the only way to fix its installing the kernel civato v2.2 .(only work with v2.2)
i hope work for you.
Video not recording
Do you have a link to the kernel and has anyone else tried this? I'm also having the same problem with the video recording not working and I'm not sure what to do about it.
chickenlittlesound said:
Hi, I have the same problem on my note 3 and the only way to fix its installing the kernel civato v2.2 .(only work with v2.2)
i hope work for you.
---------- Post added at 04:45 AM ---------- Previous post was at 04:40 AM ----------
Hi, I have the same problem on my note 3 and the only way to fix its installing the kernel civato v2.2 .(only work with v2.2)
i hope work for you.
Click to expand...
Click to collapse
I'm having exact same problem
I'm also having this exact same problem with my N9005 Note 3. Its running Lollipop but i don't really much about roms as i bought it used from some shop. Everything works fine both cameras take pictures but video recording doesn't work at all. Also i downloaded a screen roader app and its videos are also not recorded. When i finish recording them and go to gallery it says File Corrupted. Please anyone got fix of this problem yet?
So I solved it by:
Using Odin 3.11.1
I have already tried Factory reset, wipe cache, wipe dalvik, flashed the latest stock Lolipop or older lollipop with ODin and nothing solved the problem.
So I tried to flash the latest stock lolipop with Odin and marking checked (Auto Reboot , F. Reset Time , Phone EFS clear, Phone Bootloader update).
I suspect that the Phone EFS clear did the trick. It's function is related to the modem and radio of the phone. And clearly the modem has a problem here.
I hope this will help anybody out there having this issue.
This problem happened after trying to flash lollipop using FlashFire app to reserve the root that I had in my previos Android KK 4.4.2.
Phone: Galaxy Note3 N9005 Malaysian
Hi everybody,
@hayder78,
I tried to do the same to fix the issue: flash with the last firmware available for my region code (XEF - N9005XXUGBOK6) using Odin 3.11.1 and the same options (Auto Reboot , F. Reset Time , Phone EFS clear, Phone Bootloader update) but I still have the issue.
@Fenrir007
Did you manage to fix the issue using the same method?
I had the same issue with a 6.0.1 ROM (MagMa-NX UX8.5) on my Note 3 N9005. Any attempt to record video merely resulted in a "recording failed" message after about a second.
I thought I had installed a recent bootloader and modem using Odin 3.11.1, but although I did it twice I had used a "Reboot to Download" restart and for some reason that does not seem to have taken properly - although I have no idea why, all the display messages said it had worked.
So I have just done a full (remove battery and then three-finger power-up) boot into Download as advised in this thread, and then sent the same BL_N9005XXSGBQA1 and CP_N9005XXUGBOJ2 files to the phone via Odin, and now video recording works fine.
So when people say clean boot into Download, they do actually mean it. Thanks folks!
Oh, and I did NOT need to tick the "clear EFS" option, which seemed a rather risky thing to try so I was avoiding it as long as I could.
Andre
Solved for me with that boot.img from Silesh.Nair:
http://forum.xda-developers.com/moto-g4-plus/help/camera-records-video-1080p2-t3517934/post70107680
________________________________________________________
XT1642, MM modem, random custom roms
Hello guys, finally I got an error where the snapdragon camera app records video only in slow motion, see Screenshot attached while checking the video on my pc.
That was never before flashing RR 5.8.0 20161208 7.1.1 build,but I don't think it has something to do with it
Temporary workaround:
I figured out it can fixed once I clear dalvik/cache in twrp, boot rom and then record video with snap app.
Open camera crashes(camera hardware is busy cause of usage from others), wasn't before...
But after closing app and waiting some time(seconds minutes) the app only records slow motion. This happens if storage is set to internal or SD card,it's always the same.
What I did already:
-wipe everything, including internal storage, several times
-clean install of cm14.1, 3 different versions including from today. RR 5.8.0 20161126, RR 20161208. Without restoring anything.
-also with @Silesh.Nair additional boot.img for builds before today
Changed sd card from 32 to 64GB
-changed sd card from fat 32 to extfat
Restoring full backup before it happens
-dirty flash several of above roms
-logged the video recording with and without this bug https://drive.google.com/folderview?id=0B4Zy8uoEfFKLbjlYOW5WcW02LXc
But still persists... :crying:
-flashing stock rom is the next step to do
So my questions are:
-anybody seen this before with MM modem?
-any other hints somebody know?
I don't want to upgrade to N soak test for firmware files unless it's the only way! Because downgrade can cause additional problems!
I opened new thread because it's complex problem I though and maybe does nothing have to do with custom roms only...
Thanks in advance!
Till now i haven't recorded anything with my phone, but as your asked, i tried first time to record video on RR-N and my problem is also different than you too, mine is single photo to complete video... Nothing got recorded... Only single photo where from video recording started.... I checked on MOTO CAMERA too.. same on both...
Will see on other ROM...
Edit: I'm also on MM baseband, if anyone on N baseband pls confirm....
__Madddy said:
Till now i haven't recorded anything with my phone, but as your asked, i tried first time to record video on RR-N and my problem is also different than you too, mine is single photo to complete video... Nothing got recorded... Only single photo where from video recording started.... I checked on MOTO CAMERA too.. same on both...
Will see on other ROM...
Edit: I'm also on MM baseband, if anyone on N baseband pls confirm....
Click to expand...
Click to collapse
Thanks for this information! I see this in my system information for baseband:
As I never flashed another baseband/modem file or M soak test I came to the conclusion, that maybe flashing the provided boot.img from @Silesh.Nair (to bring back Hotspot on RR) messed up my baseband and other firmware files like the camera.
@Silesh.Nair could it be or am I wrong?
Thanks!
strongst said:
As I never flashed another baseband/modem file or M soak test I came to the conclusion, that maybe flashing the provided boot.img from @Silesh.Nair (to bring back Hotspot on RR) messed up my baseband and other firmware files like the camera.
@Silesh.Nair could it be or am I wrong?
Thanks!
Click to expand...
Click to collapse
My baseband is same as your's, since we both haven't flashed N soak.. nothing related to messed with baseband.. I'm trying other ROM, will see...
---------- Post added at 05:16 AM ---------- Previous post was at 04:21 AM ----------
Don't know what went wrong with previous setup, now clean flashed again with and without Boot.img also flashed boot.img with CM14.1 worked fine in all cases....
As you said it's slow motion, i have something related to that,
if snap is opened first time after every boot then it's lagging, and video recorded is of lagging images.. for that, close snap and open again.. it will work..!!:good:
Edit:
It worked only for little while after wiping cache..
And then same as before...
__Madddy said:
My baseband is same as your's, since we both haven't flashed N soak.. nothing related to messed with baseband.. I'm trying other ROM, will see...
---------- Post added at 05:16 AM ---------- Previous post was at 04:21 AM ----------
Don't know what went wrong with previous setup, now clean flashed again with and without Boot.img also flashed boot.img with CM14.1 worked fine in all cases....
As you said it's slow motion, i have something related to that,
if snap is opened first time after every boot then it's lagging, and video recorded is of lagging images.. for that, close snap and open again.. it will work..!!:good:
Click to expand...
Click to collapse
I can close snap camera and open it again, but still only 2fps after recording. I need to boot recovery and wipe caches, then after reboot it only works as long as snap camera is open. When I close it once it begins again to record 2fps
Did you have the same baseband as me after flashing other roms? Maybe last thing is flashing stock MM with fastboot?
strongst said:
I can close snap camera and open it again, but still only 2fps after recording. I need to boot recovery and wipe caches, then after reboot it only works as long as snap camera is open. When I close it once it begins again to record 2fps
Did you have the same baseband as me after flashing other roms? Maybe last thing is flashing stock MM with fastboot?
Click to expand...
Click to collapse
Yes, same MarshMallow baseband..
As i mentioned my problem in first reply, it get solved by clean flashing, you should try clean flash again..
Oopsie. I have this problem too. Single image, audio has no issues.
Force closing snap doesn't fix things.
I'm on RR, N baseband, latest build. I think the boot.IMG by @Silesh.Nair is the cause here. Is it incorporated into the ROM?
Here's the log, http://pastebin.com/xg7GFvvC
Just after video was taken with Snap and then played on Google Photos.
zeomal said:
Oopsie. I have this problem too. Single image, audio has no issues.
Force closing snap doesn't fix things.
I'm on RR, N baseband, latest build. I think the boot.IMG by @Silesh.Nair is the cause here. Is it incorporated into the ROM?
Here's the log, http://pastebin.com/xg7GFvvC
Just after video was taken with Snap and then played on Google Photos.
Click to expand...
Click to collapse
Sounds weird :silly: I used latest cm14.1 build non oms, clean flash. And here's the problem too.
Actually i restored a backup of RR 20161126 build (every thing was OK on this backup) without the mentioned boot.img but the problem persists(can take some vids, then slow motion again).
http://forum.xda-developers.com/moto-g4-plus/help/help-thread-custom-roms-t3513118/post70080516
http://forum.xda-developers.com/moto-g4-plus/help/help-thread-custom-roms-t3513118/post70080516
These happen to people who flashed soak test as well
strongst said:
These happen to people who flashed soak test as well
Click to expand...
Click to collapse
Something broken from source..!
I don't think we can solve this problem without developer's help.. i don't want to mention silesh nair as his conditions he said in help thread.
I hope @rahulsnair and @vache will look into this..
Can you play the recorded videos on a computer or on another phone ?
vache said:
Can you play the recorded videos on a computer or on another phone ?
Click to expand...
Click to collapse
I haven't tried video elsewhere, but you can see attachment in OP, it's photo of computer i think... So, not working...
Video getting recorded, is also getting damage at same time..
You can check Logs in OP..
vache said:
Can you play the recorded videos on a computer or on another phone ?
Click to expand...
Click to collapse
I can play the video on smartphone or as you see on my pc. But it is only with 2fps. Sometimes I get what Maddy and others said, it's only a picture with sound. Like a corrupted file
I'm actually testing this behavior on latest Vanir aosp, but at the moment and around 30 videos recorded i can't get this error. All videos are as they should be. But I'm still testing at the moment
Ok, since nearly 24h testing with latest Vanir rom the problem mentioned in op didn't happen anymore.
Only one thing: after recording a video you should close snap camera, reopen and then play the video with link on the left side. If you play it immediately after recording, the gallery app crashes/freezes. You can also close snap camera after recording and open Gallery separately or another viewer app. No matter if video will be saved to sd or internal storage.
I know it's not a solution for the problem, but a workaround for me
Maybe some dev can compare RR/cm14.1 with Vanir and check the difference that can cause this behavior.
If I can help further, I will do it.
Try this boot image on cm.
https://drive.google.com/file/d/0B1ZbHDX3hq1yVjlQMWpELVBXYnc/view?usp=drivesdk
Sent from my Moto G4 Plus using Tapatalk
Silesh.Nair said:
Try this boot image on cm.
https://drive.google.com/file/d/0B1ZbHDX3hq1yVjlQMWpELVBXYnc/view?usp=drivesdk
Click to expand...
Click to collapse
Works in RR, on Snap!
XT1643, 5.8.0. N modem (latest OTA).
Fails on OpenCamera.
Got some issues with video after flashing last soak on my XT1642. Phone rebooted after launching gallery app (even without trying to play a video), i was still able to shoot videos. I tried to flash many ROMs, some old ones, still same issue. Wiped and formatted almost every partition without success.
Then i decided to flash last MM full firmware, and now it's working like a charm. Dunno what appended here...
strongst said:
Ok, since nearly 24h testing with latest Vanir rom the problem mentioned in op didn't happen anymore.
Only one thing: after recording a video you should close snap camera, reopen and then play the video with link on the left side. If you play it immediately after recording, the gallery app crashes/freezes. You can also close snap camera after recording and open Gallery separately or another viewer app. No matter if video will be saved to sd or internal storage.
I know it's not a solution for the problem, but a workaround for me
Maybe some dev can compare RR/cm14.1 with Vanir and check the difference that can cause this behavior.
If I can help further, I will do it.
Click to expand...
Click to collapse
You didn't tried any other ROMs appart CM14 and RR before ?
vache said:
Got some issues with video after flashing last soak on my XT1642. Phone rebooted after launching gallery app (even without trying to play a video), i was still able to shoot videos. I tried to flash many ROMs, some old ones, still same issue. Wiped and formatted almost every partition without success.
Then i decided to flash last MM full firmware, and now it's working like a charm. Dunno what appended here...
You didn't tried any other ROMs appart CM14 and RR before ?
Click to expand...
Click to collapse
Nope, only cm14 and RR then vanir,hence still on MM firmware. But I flashed the provided boot.img in RR 7.1 thread to fix Hotspot issue on latest 7.1.1 RR and the snap bug happen first.
Actually restored backup of 20161226 RR and testing again together with Silesh.Nair's boot.img
Hi,
in my spare free time I compiled a new unofficial LineageOS 14.1 ROM on my beloved Phenom II system with ECC RAM and made it available to you for 90 days from
https://www.filefactory.com/file/5fqmz223n9gx/lineage-14.1-20170403-UNOFFICIAL-SonyLOS-kugo.zip
https://www.filefactory.com/file/121p40o8v8gb/lineage-14.1-20170403-UNOFFICIAL-SonyLOS-kugo.zip.md5sum
The ROM can be installed through a recovery like TWRP. I also applied some modifications, in particular:
- the SonyLOS kernel has been replaced with the Sony AOSP version which seemed to be more up to date
- using some 7.1 binaries of Sony AOSP instead of the 7.0 binaries used earlier enabling some more features (?)
- replaced the LineageOS camera with the Simple Camera app
- integrated Total Commander, Apollo music player v2, SELinux permission changer and Viper4Android apps since I need them
Consequently,
- patchlevel now is March 5th, 2017
- the fingerprint sensor now seems to be usable to unlock your device
- the FM radio works (however, you have to manually scan through the stations once because automatically finding the stations initially still does not seem to work completely)
- the selfie camera image no longer will be upside down (seemed to be an issue with the LineageOS camera app, also will work correctly with i.e. Focal if you prefer a sophisticated app instead of Simple Camera)
- I can now use Apollo again as I did on the Z1 compact with CM 12
- the bass boost and equalizer are back with Viper, you just need to invoke the SELinux changer on the rooted device and install the drivers initially through Viper itself
Thanks fly out to Sony AOSP, SonyLOS and the app providers. Feedback is also very welcome.
Regards,
jtk_de
@admin: Could we please move this thread and my previous one to the ROM section ? I'm still not allowed to post something there
Great to see you're still updating your ROM. Don't understand why you upload at filefactory (sloooow download) instead of androidfilehost for example. Will flash your ROM tomorrow.
- should I flash a stock ROM first or does it not matter which version I'm coming from
- what do I need the .md5sum file for?
- gapps are not included, right?
I tried to use androidfilehost but my uploads got interrupted so I had to stick with filefactory for now. You don't need to flash the stock ROM first, just wipe the system, cache etc. partitions in your recovery and flash the .zip.
The md5sum checksum file is there to ensure the ROM integrity and is not needed for the flash, however, TWRP optionally can read it and veryify that the ROM has been correctly downloaded and copied to your phone's storage. Gapps is not included since I use alternative apps, hence it must be installed separately.
Root access is integrated already and can be controlled via the developer settings. The only issue I experienced so far is that the volume cannot be altered yet during phone calls
I don't get viper4android to work. I install the drivers, reboot my device and then viper4android prompts me to install the drivers again. Am I doing something wrong?
Micka84 said:
I don't get viper4android to work. I install the drivers, reboot my device and then viper4android prompts me to install the drivers again. Am I doing something wrong?
Click to expand...
Click to collapse
You need to enable root first and start the SELinuxModeChanger installed with the ROM and set SELinux to "Permissive". Then the Viper drivers can be installed which can take quite long (a minute or so). If an Android dialog pops up because of this confirm that you would like to wait longer. Then reboot as indicated and enjoy the bass
That worked for me thank you
Hey,
many thanks for that ROM. Unfortunately i end up in a never ending boot animation. If i get in recovery (TWRP) and tell him to reboot, it tells me that no OS is installed. Any hints how this can be solved?
Thanks for any advice!
dreadavi said:
Hey,
many thanks for that ROM. Unfortunately i end up in a never ending boot animation. If i get in recovery (TWRP) and tell him to reboot, it tells me that no OS is installed. Any hints how this can be solved?
Thanks for any advice!
Click to expand...
Click to collapse
Hi!
I think there aren't any os on your device, thats wha twrp sad that... because, your systems encrypted. You could remove it. Try to flash again twrp from fastboot, than clear cache ( fastboot format cache ) and userdata ( fastboot format userdata ) from flashtools too. After that boot to twrp, than you could mount system, than flash the whole cm rom again. After that, i think it will boot correctly.
lba810701 said:
Hi!
I think there aren't any os on your device, thats wha twrp sad that... because, your systems encrypted. You could remove it. Try to flash again twrp from fastboot, than clear cache ( fastboot format cache ) and userdata ( fastboot format userdata ) from flashtools too. After that boot to twrp, than you could mount system, than flash the whole cm rom again. After that, i think it will boot correctly.
Click to expand...
Click to collapse
Thanks for the hint. Did what you said, but i cant mount system in recovery. It cant be selected in the list. Any other suggestions? Ok solved it. had to flash stock rom and boot.img before the steps you asked me to try. Thank you!
Thank you for putting this ROM together! There are the following problems on the OmniROM:
1. Incall speaker volume is not controllable
2. Slight incall echo on receiving side
3. Double tap to wake doesn't work
Is this still the case for your Lineage ROM?
avion540 said:
Thank you for putting this ROM together! There are the following problems on the OmniROM:
1. Incall speaker volume is not controllable
2. Slight incall echo on receiving side
3. Double tap to wake doesn't work
Is this still the case for your Lineage ROM?
Click to expand...
Click to collapse
1. Yes, the volume can't be changed during phonecalls
2. Didn't notice any echos so far
3. True
Could you try uploading to mega.nz? FileFactory is so slow
minimum Brightness
Hey!
i was just wondering if its possible to lower the minimal brightness a bit more. because minimal brightness is quite bright still. Im using this ROM for a few days now. Everything works pretty fine, but the battery life is a bit short for what i was expecting. If i dont use extreme battery saving mode its always around 24 hours. i barely do phone calls and i use it not very intensively... Highest Consumer is standby with 5%, which i think is wierd, isn´t it?
:good: Kudos. Everything seems to work well aside from the Bluetooth Audio cutting out after a few minutes. Overall I am really happy with it - happy enough that it's my daily driver.
Hi!
ROM will be better and better. Thanks.
Battery charging speed a bit slow, and if I'm using a mobil net, it's draining a little fast, plus in the evening, with wifi on, it goes down nearly 5%>. Camera is good. But, im using open cam software from google play. Fingerprint sensor working good, just a little hard to configure it. I'm using substratum theme engine, and i can theme most of the base and google apps. ( Except fingerprint sensor, with themed settings, the fingerprint setup screen cracked... but inthinknits theme problem ) And about bluethooth.. yes, it's dropping the connection after a few secs. But, if you left it, then reconnect automatically and just after that, it goes good. Until you turn it off. I used a sony sbh70 wireless headset with power amp.
And echo sound in calling. I can't hear echo, but other peoples in line, they sad it. They hear onselfs twice.. :/
If you would like it, maybe i can upload a logfile ( with matlog ) about the bluethooth problem.
Anyway, thanks foe thiese rom for our x compact.
It's good to see some other people are using the ROM and testing things that I can't test
According to my own experience battery lifetime is around 2-3 days when surfing via wi-fi, listening to music and calling from time to time. Battery charging with the Sony AC adapter coming with the phone is quite quick compared to the Z1C although the battery capacity is higher.
If I make another build I'll upload it to some faster provider though.
hello all,
give it some news there? Last entry April 2017.....
Hi all, are there some updates? I love Lineage OS
I'm wondering why there isn't an official build for the Xperia X Compact yet ? If I google "kugo lineageos" I get a hit for a stats page:
https://stats.lineageos.org/model/kugo
Which just says the page isn't rendered yet, but obviously someone has been devoting his/her time to the kugo. What could be the hold up? Same goes for the lack of other roms btw. It seems Sony is quite open towards the community but somehow this hasn't resulted in the overwhelming amount of roms I was hoping for ... It's quite underwhelming in fact. Could it be not enough (knowledgable) people own an Xperia X Compact ?
harryharryharry said:
It seems Sony is quite open towards the community but somehow this hasn't resulted in the overwhelming amount of roms I was hoping for ... It's quite underwhelming in fact. Could it be not enough (knowledgable) people own an Xperia X Compact ?
Click to expand...
Click to collapse
Sony gives us a sliver of what is needed for AOSP to run, camera, bluetooth, wifi, and radio band stuff all has to be manually made to work. The z3 line was the ONLY xperia line to ever get mainstream AOSP support from devs. If you bought your xperia thinking Sony's AOSP program was good you were sadly mistaken.
Hello everybody. I have a issue that is litterally making me go crazy. Basically, on every custom rom i've tried so far (Pixel experience both normal and plus, HavocOS, CRDROID, every one of them in their latest versions) video recording through any kind of camera app doesn't work, except for the ANXCamera_Unity_157, where the video recording works, in a very smooth way, but it has a bad video quality, looking like it has a very low bitrate. I unlbocked the bootloader while i was on miui 11.04 global, i wiped everything and formatted DATA through OrangeFox recovery, i'm saying this because i saw that nobody has wiped out the Internal Storage during a custom rom installation. Thanks in advance.
--UPATE--
I tried to flash the miui 10.3.10 through fastboot, and the camera didn't work at all at first, then it asked for permissions and started working, however i still can't record any videos, except for short videos. I tested the hardware and the hardware is okay. Before this i tried to restore a backup that i made on orangefox before any rom flash, and the backup doesn't work. I tried to flash the miui 11.04 global (the rom i had at the beginning of everything) from the recovery, and camera didn't work completely, along the wifi connection (i open the wifi, click on "activate" and it stalles, then turns itself off and makes the phone laggy) i don't completely know what to do, i've been searching for fixes for a bit now and it looks like i'm the only one on the entire world who has this issue. I do really need some help or at least an advice or something
--UPDATE (FINAL)--
While i was too concerned about the video recording i didn't notice that there wasn't a single sensor that was working, so i figured out that the persist partion was corrupted. I fixed everything, video recording included, just by flashing the stock MIUI (11.05) through Fastboot, and then, from the same .tgz file (the fastboot flashable rom, you can find that if you search on the internet), i took the persist.img and flashed it using orangefox recovery, and it's done, i fixed that.