Database Users

Borked my EVO

I have just managed to bork my EVO and need help! I was running 2.1 with the OTA update installed and unrEVOked3. I unrooted by using the RUU. Then I rooted again using the 2 step simple root. Everything seemed to have worked fine. I moved the pcimg36.zip to a folder on the sdcard. Sometime after restoring all my applications with Titanium backup, I lost the ability to USB mount my sdcard. Probably restored something I shouldn't have (I restored everything, thought I would be alright since it was the same release). I went into recovery to restore my nandroid backup I took right after I simple rooted. When I go into recovery, I get a picture of an EVO overlaid with a red triangle with an exclamation point. Any help would be greatly appreciated.

nahh man sounds to me like yur just BORKED.
..
:d
sorry.

it sounds like you dont have a custom recovery : \. did you use the step on simple root to install clockwork recovery? if not try running that. you should be able to get to a recovery from the red ! by holding volume up and recovery but it sounds like it may be stock.
in all honesty you are prolly not completely screwed since it boots. through i will say this belongs in the Q&A section. let us know if you tried installing a recovery through simple root and results please

Remove your battery and go back into boot again...you said you are rooted right DL and installl another ROM then install ROM manager from th market, use this to try and recover your back-up

omegasun18 said:
it sounds like you dont have a custom recovery : \. did you use the step on simple root to install clockwork recovery? if not try running that. you should be able to get to a recovery from the red ! by holding volume up and recovery but it sounds like it may be stock.
in all honesty you are prolly not completely screwed since it boots. through i will say this belongs in the Q&A section. let us know if you tried installing a recovery through simple root and results please
Click to expand...
Click to collapse
Nothing works at the triangle exclamation point. I did flash custom recovery. Ran nandroid backup right after rooting.
I am able to access ADB. Can I push something (some pcimg36.zip) to sdcard to get out of this?

Sorry to be off topic...I've been seeing borked a lot lately???? When the heck did this term start floating around?
<Note...and I've been around awhile>

todivefor said:
I have just managed to bork my EVO and need help! I was running 2.1 with the OTA update installed and unrEVOked3. I unrooted by using the RUU. Then I rooted again using the 2 step simple root. Everything seemed to have worked fine. I moved the pcimg36.zip to a folder on the sdcard. Sometime after restoring all my applications with Titanium backup, I lost the ability to USB mount my sdcard. Probably restored something I shouldn't have (I restored everything, thought I would be alright since it was the same release). I went into recovery to restore my nandroid backup I took right after I simple rooted. When I go into recovery, I get a picture of an EVO overlaid with a red triangle with an exclamation point. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Check this thread perhaps? http://forum.xda-developers.com/showthread.php?t=695243
Dunno if it describes your problem. If your phone boots up/has ADB acess, it is never bricked.

topdawgn8 said:
Sorry to be off topic...I've been seeing borked a lot lately???? When the heck did this term start floating around?
Click to expand...
Click to collapse
Ever Since HE showed up!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Robert Bork, Supreme court nominee who got shafted by Dems in congress.
Sent from my PC36100 using XDA App

Childofthehorn said:
Ever Since HE showed up!
Click to expand...
Click to collapse
frankpreyes said:
Robert Bork, Supreme court nominee who got shafted by Dems in congress.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Now THAT'S funny.

I got this working again. Even though it was not recognized as a USB device, I did have ADB ability. I restored the RUU and rerooted. Thanks all for the help.

Borked evo>>> help?
Hey man, I borked my EVO 4g too... What did you do to fix the sd from not being able to be mounted? I can only get into bootloader and recovery... And I heard that if you can get into either of those, the phone is fixable... Any help, please?

todivefor said:
I got this working again. Even though it was not recognized as a USB device, I did have ADB ability. I restored the RUU and rerooted. Thanks all for the help.
Click to expand...
Click to collapse
Hail to Pitt!!!
Tower B ruled
Sent from my PC36100 using XDA

Pretty sure calkulin has a thread in dev section about fixing SD not being recognized. Also, have you tried removing it, booting, put back in boot again? Or try SD rescan app from market? What have you already tried and when did it start?
And that's funny, I never correlated borked with Robert Bork lol
Edit: this thread
http://forum.xda-developers.com/showthread.php?p=21207114
sent from 2yr old Evo on ICS

"was running 2.1..."
wat.
Sent from my heroS

pspunderground said:
"was running 2.1..."
wat.
Sent from my heroS
Click to expand...
Click to collapse
Me thinks it was from aug. 2010
Sent from my PC36100 using XDA

[Q] please help im new. already rooted

i just rooted my epic the other day. i want to get this synicate rom i been hearing about. can someone please tell me in a very inexperienced way how to get it done. what programs i need to down load. i have EC05 on my phone now. I think i have to upgrade somehow to ext4 or something like thta. please help .

Just follow the instructions in the second post of the ROM thread:
http://forum.xda-developers.com/showthread.php?t=976194
When you do the one-click root with CWM3 and boot into recovery for the first time, it'll convert it to EXT 4 automatically. Also, when the instructions say "Wipe data", they mean do it three times each to data/factory reset, cache and dalivik. It will wipe data though, so save any apps you have with titanium backup or mybackup root.

do i need to download the one click 3.0.0 in order to get ext4?

Yes, SpicyBurrito references this when saying "...when you do the one-click root with CWM3..." You'll need to flash CWM3 to get ext4.
It will convert automatically the next time you boot into recovery...so have a ROM flash ready as the stock RFS ROM will no longer work.

so basically re-root my phone with that cw3 and then should i have the rom already stored on my sd card before i run the cw3? sorry for the dumd questions man but im new to the terms people use here and am a admitted newbie.

I have a video posted on what you need to do. There's a sticky thread in the general section
Sent from my SPH-D700 using XDA App

jimmyjames72 said:
so basically re-root my phone with that cw3 and then should i have the rom already stored on my sd card before i run the cw3? sorry for the dumd questions man but im new to the terms people use here and am a admitted newbie.
Click to expand...
Click to collapse
And yes you do need the rom on ur sd card before you first boot into clockwork after doing cwm3.0.0.6
Sent from my SPH-D700 using XDA App

Ok so heres what im gonna do hopefully its in the right order, please advise.
1 gonna dowload cw3 and sydicate files to desktop
2 going to plug up phone and transfer syndicate to sd card.
3 gonna unplug phone then turn on debugging and connect phone and run the cw3 file and let it run its course.
4 after that process is complete im gonna use the volume down,start and camera button to go into the files and clear all the 3 types of data,
5 then im gonna find the syndicate file and install it from sd card.
is this the way it is done. man i hope so

jimmyjames72 said:
Ok so heres what im gonna do hopefully its in the right order, please advise.
1 gonna dowload cw3 and sydicate files to desktop
2 going to plug up phone and transfer syndicate to sd card.
3 gonna unplug phone then turn on debugging and connect phone and run the cw3 file and let it run its course.
4 after that process is complete im gonna use the volume down,start and camera button to go into the files and clear all the 3 types of data,
5 then im gonna find the syndicate file and install it from sd card.
is this the way it is done. man i hope so
Click to expand...
Click to collapse
Yes it is.
Sent from my Frozen over Epic

nice im gonna do it later tonight when i get home. will post back my results.

Just follow the video. I found that rom to be flaky. kept locking my phone. My brother had similar problems
Sent from my SPH-D700 using XDA App

babystewie said:
. I found that rom to be flaky. kept locking my phone. My brother had similar problems
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
In the thread they have to have mentioned the fix for that (flashing the older kernel) over 100 times.

http://www.youtube.com/watch?v=Wy2Et6qVGdo&feature=channel_video_title
FOLLOW THIS VIDEO. IT'S EXACTLY WHAT YOU NEED TO DO

God, I hate caps lock.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

063_XOBX said:
God, I hate caps lock.
Click to expand...
Click to collapse
XD I really don't know why I did that truthfully.

**** the phone is stuck at the samsung start up screen. i got to the point of one root 3.0.0 install and then it said reboot system and i said yes. now stuck.

jimmyjames72 said:
**** the phone is stuck at the samsung start up screen. i got to the point of one root 3.0.0 install and then it said reboot system and i said yes. now stuck.
Click to expand...
Click to collapse
You need to flash the rom b4 u reboot for the first time. Try to go into cwm and flash the rom see if that works if not ur going to have to use odin to flash back to stock and start over
Sent from my SPH-D700 using XDA Premium App

Hey jimmyjames, let me give you some advice. Slow down a bit.
You're jumping in to the idea of rooting and flashing too quickly. I know you're anxious, but read a bit more and watch some videos. Believe me, I've learned from that too many times.
Like right now, I'm really tempted to flash the new CM7 Alpha 4. But I usually am not comfortable flashing ROMs, so I'm waiting until it's stable enough to flash.

what files do i need to download to start over.? help please. and i will heed all future advise

Acer, I feel ya on that. I am also waiting plus I neef my gps and camera functioning.
Sent from my SPH-D700 using XDA App

[HOW TO] install CyanogenMod/MIUI to your phone

[CyanogenMod/MIUI]
This assumes that you are running stock froyo or gingerbread ROM:
1.first make sure your phone is rooted.If not,come here for detail.Specially for GB rooting,come here for tutorial.
2.download and install droid2bootstrap(attachment)
3.open droid2bootstrap and select install recovery
4.Install bootmenu v0.8.6. For more detail,come here
5.download CM7 All in one update.zip from here and then put it in your sdcard
6.reboot to bootmenu and then goto custom recoery
7.apply All in one update.zip(ROM package)
8.reboot to bootmenu again!
10.wipe data/cache
11.apply update again
12.reboot and everything should be OK
Specially,if you already get bootmenu v1.x.x working in your phone,you can skip step1~7.
Click to expand...
Click to collapse
-----------------------------------------------------------------------------
[CyanogenMod]
This assumes that you are running MIUI:
1.reboot to bootmenu and then goto recovery
2.wipe data/cache
3.apply All in one update.zip(ROM package)
4.reboot and everything should be OK
Click to expand...
Click to collapse
This assumes that you are running CM7:
1.reboot to bootmenu and then goto recovery
2.wipe cache and dalvik cache in advance menu
3.apply All in one update.zip(ROM package)
4.reboot and everything should be OK
Specially,if you got some apps FC issues,first try to clear data for that app.And if you still get serious FCs,consider to make a full data wipe.
Click to expand...
Click to collapse
-----------------------------------------------------------------------------
[MIUI]
This assumes that you are running CM7:
1.reboot to bootmenu and then goto recovery
2.wipe data/cache
3.apply All in one update.zip(ROM package)
4.reboot and everything should be OK
Click to expand...
Click to collapse
This assumes that you are running MIUI:
1.reboot to bootmenu and then goto recovery
2.wipe cache and dalvik cache in advance menu
3.apply All in one update.zip(ROM package)
4.reboot and everything should be OK
Specially,if you got some apps FC issues,first try to clear data for that app.And if you still get serious FCs,consider to make a full data wipe.
Click to expand...
Click to collapse
-----------------------------------------------------------------------------

Questions
I have some questions ...
Firstly, with regard to the cm7 20111018-nightly v1.0, you mention that DEVTREE changed to UK2.2.2 and use CH2.6.0 kernel. Will the change in kernel appear in my phone ? (ie under kernel version)
Secondly, there is changes for the battd from uk2.2.2 (no battery jumping) Does it mean that the battery will not drop from 65% to 50 %?
Lastly, if I'm using the phone for mass storage and after i safely remove it, which is suppose to appear? ME722 or A953? (I'm from Asia region)
(I'm sorry, I cant post in the android development due to limited posts)
Thanks.

puiboy said:
I have some questions ...
Firstly, with regard to the cm7 20111018-nightly v1.0, you mention that DEVTREE changed to UK2.2.2 and use CH2.6.0 kernel. Will the change in kernel appear in my phone ? (ie under kernel version)
Secondly, there is changes for the battd from uk2.2.2 (no battery jumping) Does it mean that the battery will not drop from 65% to 50 %?
Lastly, if I'm using the phone for mass storage and after i safely remove it, which is suppose to appear? ME722 or A953? (I'm from Asia region)
(I'm sorry, I cant post in the android development due to limited posts)
Thanks.
Click to expand...
Click to collapse
1.devtree will not show.
2.Yep,it should be.At least in my daily use.
3.When you use UK devtree, it shows A953.Otherwise ME722.

Thanks to this repost I'm now using the CM7 port, thank you very much.
Sent from my MotoA953 using XDA App

Endless7 said:
1.devtree will not show.
2.Yep,it should be.At least in my daily use.
3.When you use UK devtree, it shows A953.Otherwise ME722.
Click to expand...
Click to collapse
Thanks Endless7, really appreciate it.
If there is battery jump, what advice can you give me?
Thanks

puiboy said:
Thanks Endless7, really appreciate it.
If there is battery jump, what advice can you give me?
Thanks
Click to expand...
Click to collapse
Use battery calibration to calibrate or wipe battery status in CWM.

Endless7 said:
Use battery calibration to calibrate or wipe battery status in CWM.
Click to expand...
Click to collapse
Use battery calibration to calibrate it for cm7-20111018, but battery still drop from 65% to 50% . Have flashed to the latest rom.

I'm having a problem. CM nightly does install fine and reboots but when I install droid2bootstrap and tries to boot into recovery, it does hangs on boot screen. Is there any specific directions I'm missing??

You cant use Droid2Bootstrap in CM7 or MIUI. They have integrated Bootmenu, which have included custom recovery.

ok then how to enter in recovery or Bootmenu? I'm giving a last go again :-(
Edit: I'm idiot!!!!! Cheers UFO for pointing.

After installing MIUI my Milestone2 is restarting constantly. Once installed, it worked normally. After installing several apps, it began to restart. I went back to voltage and frequency for stock. He kept restarting. I decided to start over. This time, I installed a few apps, restart stopped. After installing all the apps, To restart again. I was uninstalling apps, and it stopped rebooting. Is he related to the amount of apps, or even the amount of homescreens? I used the room (2.2.2 Argentina). MIUI 1.10.21V2. I believe that many users experienced this. Thank you.

Sorry, but I'm going to need some help to do this...
I couldn't find te CM7 All in one update.zip to download it, can anyone help me?
Sorry, I really don't know nothing about this... but I really want to try CM7

Found it?
guilhermemz said:
Sorry, but I'm going to need some help to do this...
I couldn't find te CM7 All in one update.zip to download it, can anyone help me?
Sorry, I really don't know nothing about this... but I really want to try CM7
Click to expand...
Click to collapse
I'm not 100% sure and just finished reading through this whole stuff for the Milestone 2, but I think it's (as of today) the file called: "cm7-20111027-NIGHTLY-Milestone2-ICS-Stable-v2.zip". The link is always at the end of the last changelog in the code box (just scroll a little bit down).
---------- Post added at 04:40 AM ---------- Previous post was at 03:51 AM ----------
After this procedure the bootloader is still locked, isn't it?
What is now different before the leaked ROM came to us, why can we now install custom a ROM? We have a suitable kernel?

Big thanks for the hard work getting this done
noticed a few people have a problem with the USB not mounting and I'm having the same problem, quick digging around I found out when I mount as "memory card access" it connects find to the pc but unmounts the SD card and I haven't found out how to remount it yet
---------- Post added at 09:42 PM ---------- Previous post was at 09:20 PM ----------
forgot to mention going to setting>storage mount sd card is greyed out
20111027-NIGHTLY-ICS-Stable-v2

when I open Droid 2 BootStraper, only two choice can be chose,how i can install the recovery ?
I will upload a photo !
please help to fix it !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

LittleKu said:
when I open Droid 2 BootStraper, only two choice can be chose,how i can install the recovery ?
Click to expand...
Click to collapse
click on bootstrap recovery and when it asks for root permissions give it, after that click on reboot recovery and it will take you to the recovery.

Good how to, i dont know how enter the recovery...
Enviado desde mi MotoA953 usando Tapatalk

BlackF09
Did you installed CM7? How was it?
Sent from my A953 using XDA App

Is there a way to backup the widgets (their positions in the screen)?
Can titanium do that? I've tried but unsucessfully.
By the way, I'm using cyanogenmod and it's awsome. Congrats endless7.
Sent from my MotoA953 using XDA App

Hello,
I'm following the steps to install CM7 on my phone - currently using "mostly blurless gingerbread" rom - but I'm getting an error message "Invalid MD5" when trying to apply the update (step 7).
Also, another question - do I need to unzip the update on the destination folder, or leave it unzipped?
Thanks in advance.

[ROM][PORT] Cyanogenmod 7 (Unofficial) for the Motorola XPRT

Cyanogenmod 7 for Motorola XPRT
Disclaimer: Do not flash this ROM if you do not know what you are doing and I take no responsibility if you do so, etc.
This is not an official ROM nor a final ROM. This ROM is still in testing stage and there will be some issues and problems. If some errors are encountered and somethings dont work then please post those issues in this thread.
Things that are tested and working:
Call and Data in GSM
Camera
Audio/Video
Call Recorder
etc.
Things that don't work:
Home button,
Voice search button
Side button.
Requirements:
1. Flash Gingerbread 2.3.5
2. Root
3. Install Custom Recovery
Boot into recovery and flash the ROM below:
http://www.4shared.com/zip/X8rTOj2P/cm-720-kronos.html
Next do a data/factory reset from your recovery.
After installing this ROM, Flash gapps for gingerbread to get Google Play Store ( Android Market) from http://goo.im/gapps/gapps-gb-20110828-signed.zip
After flashing this ROM it is not recommended to install recovery like Droid2 bootstrapper.
You can get to the bootmenu by rebooting your phone and when it starts up the LED will turn blue. When it turns blue press the volume down button. From the bootmenu you can choose the Recovery option.

thank you
rongsang said:
Cyanogenmod 7 for Motorola XPRT
Disclaimer: Do not flash this ROM if you do not know what you are doing and I take no responsibility if you do so, etc.
This is not an official ROM nor a final ROM. This ROM is still in testing stage and there will be some issues and problems. If some errors are encountered and somethings dont work then please post those issues in this thread.
Things that are tested and working:
Call and Data in GSM
Camera
Audio/Video
Call Recorder
etc.
Requirements:
1. Flash Gingerbread 2.3.5
2. Root
3. Install Custom Recovery
Boot into recovery and flash the ROM below:
http://www.4shared.com/zip/X8rTOj2P/cm-720-kronos.html
After flashing this ROM it is not recommended to install recovery like Droid2 bootstrapper.
You can get to the bootmenu by rebooting your phone and when it starts up the LED will turn blue. When it turns blue press the volume down button. From the bootmenu you can choose the Recovery option
Click to expand...
Click to collapse
Thank you very much ! you are a superman!:laugh:

Dear rongsang!
Merry Christmas and happy New Year!
Thank you for your work!
Pls attach the file Bootmenu_v0.8.6-v2_2_2 to the post)
Because, i think, many people trying to find it =)
Some instruction for noobs(i am noob too =) ):
1,Flash original 2.3.5 moto rom.
2.Root it.
3.Install droid Droid2Bootstrap recovery.
4.Run droid2 recovery, click on install recovery.
5.Reboot to recovery from program roid2 recovery.
6.Flash update Bootmenu_v0.8.6-v2_2_2 from recovery.
7.after flash reboot the phone.
8.Phone reboot into boot menu.
9.boot-enter-set default(second init)-go back
10.Choose recovery and press on custom recovery.
11.Backup and restore-backup(you need free space on your sd card).
12.flash update from sd card cm-7.2.0-kronos.zip
13.reboot the phone.
Enjoys =)
P.S. If you want to restore your backup, then you must restore and change in the boot set default normal!

sniper304 said:
Dear rongsang!
Merry Christmas and happy New Year!
Thank you for your work!
Pls attach the file Bootmenu_v0.8.6-v2_2_2 to the post)
Because, i think, many people trying to find it =)
Some instruction for noobs(i am noob too =) ):
1,Flash original 2.3.5 moto rom.
2.Root it.
3.Install droid Droid2Bootstrap recovery.
4.Run droid2 recovery, click on install recovery.
5.Reboot to recovery from program roid2 recovery.
6.Flash update Bootmenu_v0.8.6-v2_2_2 from recovery.
7.after flash reboot the phone.
8.Phone reboot into boot menu.
9.boot-enter-set default(second init)-go back
10.Choose recovery and press on custom recovery.
11.Backup and restore-backup(you need free space on your sd card).
12.flash update from sd card cm-7.2.0-kronos.zip
13.reboot the phone.
Enjoys =)
P.S. If you want to restore your backup, then you must restore and change in the boot set default normal!
Click to expand...
Click to collapse
It is not necessary to install the bootmenu as in step 6. You can install the droid2 bootstrapper and flash the ROM directly as the ROM already contains the bootmenu in it.

rongsang said:
It is not necessary to install the bootmenu as in step 6. You can install the droid2 bootstrapper and flash the ROM directly as the ROM already contains the bootmenu in it.
Click to expand...
Click to collapse
Ok,thanks!But i used bootmenu and recovery for a953 =)
Work good, now testet, wifi work ok!
Home button don't work(
When push it, it only vibrate.
When disable all keyboard settings(suach as auto replace;auto-cap;auto-punctuate)
keyboard don't visible on the screen
upd.
lockscreen dont work when i turn off display.why?we can change settings of lockscreen?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
p.s. plz add to first message than, if you want adnroid market you must installe gapps for gb =)

So far I've only noticed the problem with the home menu button as the user above had stated. And and this on to your list rongsang. Calls and data work straight off the bat CDMA Boost Mobile! Amazing job.

Great Job Rongsang! Nearly perfect! I had the home button problem too, but I reflashed the rom, and it still didn't work. So then I deleted the dalvik-cache when I was installing gapps, and now the home button works. Not sure what fixed it though, lol.
Sent from my MB612 using xda app-developers app

tzuba12 said:
Great Job Rongsang! Nearly perfect! I had the home button problem too, but I reflashed the rom, and it still didn't work. So then I deleted the dalvik-cache when I was installing gapps, and now the home button works. Not sure what fixed it though, lol.
Sent from my MB612 using xda app-developers app
Click to expand...
Click to collapse
clean dalvik cache, but still no working(
upd.
In setting there is a dock settings.What is this?It's used in moto xprt?
P.S. Soory for my big list of question!
Upd 2.
When i trying to call on my mobile, call didn't go, because my mobile automatically ending call(

So far I've only noticed the problem with the home menu button as the user above had stated. And and this on to your list rongsang. Calls and data work straight off the bat CDMA Boost Mobile! Amazing job.
Click to expand...
Click to collapse
Yeah i forgot to add those... My first priority was just to upload the rom and post it so I didnt remember to write most of the things and I don't remember most of those things right now so kindly remind me and I will keep adding it to my post. Thank you guys..

tzuba12 said:
Great Job Rongsang! Nearly perfect! I had the home button problem too, but I reflashed the rom, and it still didn't work. So then I deleted the dalvik-cache when I was installing gapps, and now the home button works. Not sure what fixed it though, lol.
Sent from my MB612 using xda app-developers app
Click to expand...
Click to collapse
Same here. Just installing gapps fixes the home menu button. Heres the one you guys need.

BlackFire27 said:
Same here. Just installing gapps fixes the home menu button. Heres the one you guys need.
Click to expand...
Click to collapse
Flash it frome Recover?

zhongwu said:
Flash it frome Recover?
Click to expand...
Click to collapse
Yes.

Reboot the phone, and now call going to my phone.

sniper304 said:
Reboot the phone, and now call going to my phone.
Click to expand...
Click to collapse
Do try installing Google Apps. The phone app is updated sometimes through it I believe.

BlackFire27 said:
Do try installing Google Apps. The phone app is updated sometimes through it I believe.
Click to expand...
Click to collapse
call don't goint to me, after i installed gapps.But after reboot all work.
Approximation sensor didn't work correctly(when you calling, if you take mobile phone from ear, after that sensor don't work correctly)!

sniper304 said:
call don't goint to me, after i installed gapps.But after reboot all work.
Approximation sensor didn't work correctly(when you calling, if you take mobile phone from ear, after that sensor don't work correctly)!
Click to expand...
Click to collapse
I'm having no problems with the proximity sensor at all :/

sniper304 said:
Approximation sensor didn't work correctly(when you calling, if you take mobile phone from ear, after that sensor don't work correctly)!
Click to expand...
Click to collapse
Sorry, sensor work correctly!(this is my feature, i trying to put a finger on it , but i think sensor don't understand finger xD)
upd.
Bluetooth received files good,don't test bt audio.

sniper304 said:
Sorry, sensor work correctly!(this is my feature, i trying to put a finger on it , but i think sensor don't understand finger xD)
Click to expand...
Click to collapse
:laugh: happy new year ，everyone:highfive:

sniper304 said:
Sorry, sensor work correctly!(this is my feature, i trying to put a finger on it , but i think sensor don't understand finger xD)
upd.
Bluetooth received files good,don't test bt audio.
Click to expand...
Click to collapse
Lol. Well do keep in mind it also uses the accelerometer too to find out if its not by your ear. Because youll bring it down to look at the screen.

zhongwu said:
:laugh: happy new year ,everyone:highfive:
Click to expand...
Click to collapse
Happy new year):highfive:

[Q] Odin Flash Failure - Advice Please

I've tried to flash my GT-I9505 using Odin and it's failed (please see screen grab below).
I used "I9505XXUBMH1-PRE-ROOTED-ODEX-FULL" from post 5 of this thread
Code:
http://forum.xda-developers.com/showthread.php?t=2250824
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
A few weeks ago, I tried "I9505XXUBMGA-PRE-ROOTED-ODEX-FULL" from the same thread and that failed and locked up my phone.
Which I had to pay to get the phone re-flashed properly.
(I've used the above successfully in the past).
Now, I'm in the same position again with a failed flash and probably paying to have it fixed again.
On the phone itself, the progress bar is only 2mm long. So if I switch it off, it will probably mess everything up.
What should I do now, while it's still connected to the PC and how can I successfully flash it in the future ?
Thank you.

What firmware's currently on the phone ?

MistahBungle said:
What firmware's currently on the phone ?
Click to expand...
Click to collapse
It's 4.2.2.
I've managed to get the phone "working" again, by using "I9505XXUAME2-PRE-ROOTED-KNOX".
Which is on the same thread.
But, since I got the phone working again, I can't get WiFi to switch on. Factory reseting via Settings doesn't fix it.
All the ROMs I downloading in the past (MF8, MGA and MH1) with "ODEX" in the title from the same thread don't work.
Odin (any version), says "Not Responding" when I try them and fails to update (using Win 8.1).

0-0-0 said:
It's 4.2.2.
I've managed to get the phone "working" again, by using "I9505XXUAME2-PRE-ROOTED-KNOX".
Which is on the same thread.
But, since I got the phone working again, I can't get WiFi to switch on. Factory reseting via Settings doesn't fix it.
All the ROMs I downloading in the past (MF8, MGA and MH1) with "ODEX" in the title from the same thread don't work.
Odin (any version), says "Not Responding" when I try them and fails to update (using Win 8.1).
Click to expand...
Click to collapse
Try clearing data , cache and dalvik cache from cwm and do a factory reset in cwm
sent from my GT-I9082 using xda app-developers app

asifcheer said:
Try clearing data , cache and dalvik cache from cwm and do a factory reset in cwm
sent from my GT-I9082 using xda app-developers app
Click to expand...
Click to collapse
Sorry, but I've no idea what you're talking about.
Simple instructions, please.
If it's for post 3: If it's the same as powering off the phone and starting it with Vol. up, Home and Power keys and resetting it that way.
That didn't for resetting the phone and the WiFi problem.
If it's for post 1, please ignore.

0-0-0 said:
Sorry, but I've no idea what you're talking about.
Simple instructions, please.
If it's for post 3: If it's the same as powering off the phone and starting it with Vol. up, Home and Power keys and resetting it that way.
That didn't for resetting the phone and the WiFi problem.
If it's for post 1, please ignore.
Click to expand...
Click to collapse
Edit:
Just to update.
I've lost all sound and I can't play any music or videos, even the Samsung material.

have u flashed a custom-recovery like cwm, Philz or TWRP?
If "clearing data , cache and dalvik cache" are new for you, plz read more about this all.

btmz said:
have u flashed a custom-recovery like cwm, Philz or TWRP?
If "clearing data , cache and dalvik cache" are new for you, plz read more about this all.
Click to expand...
Click to collapse
Thanks for the reply.
CWM
I've deleted the cache partition and wipe data/factory rest.
I can't find the "dalvik cache", I've seen a YT video about it, but it's in "advanced settings", which I don't have.
I'm rooted , SuperSU is installed.

delvik cache is under advance option of philz recovery
AND DO INSTALL THE LATEST PHILZ RECOVERY V 6.0.0.1

Clearing cache/Dalvik ain't going to fix your problem. Your sound/WiFi is busted due to that bootloader issue. You need to flash a 'WiFi fix' (non-HLOS modem) to match your current firmware/bootloader. Go to the modem thread (search; easily found) & find a non-HLOS modem to match your current firmware (and I don't mean 4.2.2 or whatever, I mean XXUA, etc, etc)

Thank you for the replies and help.
This is the WiFi Fix page http://d-h.st/users/DjeMBeY/?fld_id=16262#files
But, my current FW isn't listed (ME2), I've tried ME3 and MEA, I think those are the ones before and after ME2 (maybe wrong).
But, they don't work. I've tried them multiple times.
I'm not sure which others to try.
I'm going to pay and hopefully get it fixed today.
But, I'd still like to know how to fix it, for future use.
It will mess up again, when I root it. That is unless I just stick with "I9505XXUAME2-PRE-ROOTED-KNOX" and not try later updated ROMs which have worked in the past).

0-0-0 said:
0-0-0 said:
I've tried to flash my GT-I9505 using Odin and it's failed (please see screen grab below).
I used "I9505XXUBMH1-PRE-ROOTED-ODEX-FULL" from post 5 of this thread
Code:
http://forum.xda-developers.com/showthread.php?t=2250824
A few weeks ago, I tried "I9505XXUBMGA-PRE-ROOTED-ODEX-FULL" from the same thread and that failed and locked up my phone.
Which I had to pay to get the phone re-flashed properly.
(I've used the above successfully in the past).
Now, I'm in the same position again with a failed flash and probably paying to have it fixed again.
On the phone itself, the progress bar is only 2mm long. So if I switch it off, it will probably mess everything up.
What should I do now, while it's still connected to the PC and how can I successfully flash it in the future ?
Thank you.
Click to expand...
Click to collapse
Maybe this helps ya: HERE
Click to expand...
Click to collapse

Joku1981 said:
0-0-0 said:
Maybe this helps ya: HERE
Click to expand...
Click to collapse
Thank you.
My phone is currently at the shop, waiting to be fixed.
But, I'll try those.
Click to expand...
Click to collapse

0-0-0 said:
Joku1981 said:
Thank you.
My phone is currently at the shop, waiting to be fixed.
But, I'll try those.
Click to expand...
Click to collapse
pla report whats happend.
Click to expand...
Click to collapse

btmz said:
0-0-0 said:
pla report whats happend.
Click to expand...
Click to collapse
I'm due to collect the phone tomorrow, I received info from them today (Geek Squad at Carphone Warehouse, a company based in the UK), saying that it had been fixed.
I'm guessing they reflashed it. But no info was given on what they did.
After I get it back, I think I'll get rid of it and get a HTC One instead.
Using a custom pre rooted ROM, just seems to mess the phone up.
Hopefully there's another way for the HTC. Plus, I shouldn't need to worry about Knox.
Click to expand...
Click to collapse

http://forum.xda-developers.com/showpost.php?p=40778466&postcount=4
Download and flash modem for old bootloader and everything will be back to normal
Sent from my GT-I9505 using XDA Premium 4 mobile app

lazybeard said:
http://forum.xda-developers.com/showpost.php?p=40778466&postcount=4
Download and flash modem for old bootloader and everything will be back to normal
Sent from my GT-I9505 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you.