Database Users

SDHC 8Gb SDcard not recognized

Hi there, new to this forum so can't post to development forum although I searched there. I'm running Swiftdroid 1.8 / CM7 by Mur4ik on my GT540 and all works fine. The stock 2Gb SDcard that came with the phone is a bit small for my liking so I got myself a Kingston 8Gb class 4 SDHC. Unfortunately this card does not seem to be recognized by the phone, the following are the symptoms:
1. When inserting card and booting phone, mostly it gets stuck at LG boot screen.
2. Sometimes it does boot but then doesn't mount the SDcard. After boot I get a notification like "unknown filesystem on SDcard" (or similar), and do you want to format the SDcard? Yet if I try to format it using the phone, it doesn't work.
3. Checking with adb shell and "mount" I see that the SDcard is not actually mounted.
4. The card is recognized fine on a computer via USB under both Windows and linux, and I can transfer files.
5. When manually partitioning the SDcard (gparted under Ubuntu) to only contain a 4Gb partition formatted with FAT16, then it works fine and is recognized (remaining 4Gb unused). Unfortunately FAT16 is 4Gb max, so I can't format the whole card in a single FAT16 partition. Also at that size FAT16 is very space wasteful (65k cluster size) so that even a tiny file takes minimum 65k space.
6. However, when formatting this SAME partition (i.e. 4Gb) as FAT32 it is not recognized and I get the same errors as above with the single 8Gb FAT32 partition.
7. I tried reformatting the card with SD Formatter 3.0 from ---www dot sdcard dot org--- but it did not make a difference.
So it does not seem to be the card that's faulty. Has anyone else experience with using FAT32 formatted SDcards on Swiftdroid? From reading the forums this should be no problem and certainly the Linux kernel can recognize FAT32. Also there was a report of someone using a 32Gb SDHC with the GT540 although I'm not sure which firmware (stock or mod).
I haven't tried it with Stock LG 2.1 ROM but am very happy with Swiftdroid so don't want to go back to 2.1 just to get the SDcard working.

Have you formatted it as primary

Faulty SD card? ,I'm using a 8gb on swiftdroid
Sent from my GT540 using XDA App

I had a problem with mine too and did tons of research but mine is really death lol is other story. But tell you what first try with the best and leave small alternative fixes for later PS. I have many . Download disk parted is freeware and is a portable program no need to install. Is intuitive to use. It has a wiki if you don't know what to do with the app.
Last post, bed time!
Sent from my GT540 using XDA App

gizmo001i said:
Have you formatted it as primary
Click to expand...
Click to collapse
Yeah sure, formatted as first primary partition.

aaa801 said:
Faulty SD card? ,I'm using a 8gb on swiftdroid
Sent from my GT540 using XDA App
Click to expand...
Click to collapse
Don't think the SD card is faulty as I can mount, format and read/write to it via usb on a computer running both Windows and Linux.

lavero.burgos said:
I had a problem with mine too and did tons of research but mine is really death lol is other story. But tell you what first try with the best and leave small alternative fixes for later PS. I have many . Download disk parted is freeware and is a portable program no need to install. Is intuitive to use. It has a wiki if you don't know what to do with the app.
Last post, bed time!
Sent from my GT540 using XDA App
Click to expand...
Click to collapse
What is the "disk parted" software you are referring to? Can't seem to find it. Can you post a link? I've tried gparted, fdisk and cfdisk under Linux, as well as SD formatter 3.0 under Windows.

I have had similar problems after changing card, that I managed to resolved after rebuliding MBR of the card and reformating the card
Use Mini Partition Wizzard (Home Edition), delete existing partitions ,select disk and rebuild MBR, than do the format.
I hope that helps, I worked for me.

jrohwer said:
What is the "disk parted" software you are referring to? Can't seem to find it. Can you post a link? I've tried gparted, fdisk and cfdisk under Linux, as well as SD formatter 3.0 under Windows.
Click to expand...
Click to collapse
Soooooooooooooooo soooooooooooooooo sorry my fault see i was sleepy and did not remember well the name the program is called TestDisk, here is the link:
http://www.cgsecurity.org/wiki/TestDisk_Download

ktmt said:
I have had similar problems after changing card, that I managed to resolved after rebuliding MBR of the card and reformating the card
Use Mini Partition Wizzard (Home Edition), delete existing partitions ,select disk and rebuild MBR, than do the format.
I hope that helps, I worked for me.
Click to expand...
Click to collapse
Tried this, but it did not make a difference After trying to boot phone with newly formatted SD card, it just gets stuck at LG logo. When re-inserting the original 2Gb SD card it boots up just fine.

lavero.burgos said:
Soooooooooooooooo soooooooooooooooo sorry my fault see i was sleepy and did not remember well the name the program is called TestDisk, here is the link:
Click to expand...
Click to collapse
OK, so I tried formatting the card with TestDisk (under Ubuntu linux) but again it did not help. Place freshly formatted FAT32 8Gb SDcard into phone, switch on, and it gets stuck at LG boot logo Insert original 2Gb card (FAT16) and it boots just fine....
The 8Gb card seems just fine as I can mount it under Windows and Linux, copy files, read files, etc. all normal.
So I'd be interested to hear about your many "small alternative fixes"
P.S. Also tried Mini Partition Wizard (following ktmt suggestion) under Windows, but did not work either.

SAME thing happened to me what i did is flashes some kdz files in hope to freshen up the phone and it worked for me

I think you will find that for a larger card, you really need at least a class 6 card so that the card doesn't cause a bottle neck. A class 4 card may be too slow for that size card. I have heard of a few people getting rid of any card problems they had by using a faster card.

Hi folks,
I`ve had the same problems with my sd-card on my GT540 ! (SanDisk 8GB SDHC)
So, try to solve it - the same way, I`ve solved it before !
No warranty ! And, please, do not blame me, if it will not work on your phone !
........................................................................................................................................
Put the SD-CARD out of your PHONE and into an SD-CARD ADAPTER !
Plug it into your PC, make a BACKUP of all of your files !
Use GEDIT to erase all Partitions on your SD-CARD !
Create a new EXT2 Partion + Format it to EXT2 again !
Use GEDIT to erase all Partitions on your SD-CARD !
Create a new FAT32 Partition + Format it to FAT32 again !
Put the SD-CARD out of the ADAPTER and into your PHONE !
Start your PHONE, let it boot up + recognize + load your SD-CARD !
Try to make a PHOTO + to store it on your SD-CARD !
NO ERROR MESSAGES OCCURED UNTIL NOW ??? THEN EVERYTHING IS O.K: !!!
BE SURE, THAT YOU`VE INSTALLED THE LATEST CLOCKWORKMOD RECOVERY -
3.0.2.4 OR ABOVE + THE SWIFTDROID 2.3.3 V2.0 - BEFORE !!!
AND DO NOT USE WINDOWS7 TO TRY TO FORMAT YOUR SD-CARD - IT DOES NOT
WORK !!!
.......................................................................................................................................
ONLY TO YOUR INFORMATION : I`M USING SWIFTDROID 2.3.3 V2.0
– SINCE 21.04.2011 – WITHOUT ANY PROBLEMS
- AT A MINIMUM SPEED-RATE OF 122 MHZ
- AT A MAXIMUM SPEED-RATE OF 852 MHZ
PLEASE DO NOT TRY HIGHER SPEED-RATES - BECAUSE YOUR PHONE WILL GET
HOT AND UNSTABLE !
........................................................................................................................................
AND YOU`LL BE ABLE TO DECREASE THE POWER CONSUMPTION OF YOUR PHONE
- BY SETTING :
- THE MINIMUM SPEED-RATE TO 122 MHZ
- THE MAXIMUM SPEED-RATE TO 600 MHZ ( THE LOWER = THE BETTER )
........................................................................................................................................
A PERSONAL TIP : IF YOU`RE NORMALLY USING THE PHONE- FUNCTIONS - ONLY :
- SET THE MINIMUM SPEED-RATE TO 122 MHZ
- SET THE MAXIMUM SPEED-RATE TO 300 MHZ OR 400 MHZ
- AND IMPROVE THE MAXIMUM SPEED-RATE ON DEMAND - IF YOU NEED IT !
----------------------------------------------------------------------------------------------------------------------------------------
NOW : HAVE FUN + TRY TO FIX YOUR PROBLEM - AS MENTIONED ABOVE !
AND : LEAVE A MESSAGE ON THIS BOARD
- IF MY TIP WAS HELPFUL TO SOLVE YOUR PROBLEM - OR NOT !
........................................................................................................................................
I.ME.MYSELF

maybe, it can also be a "pressure-error", because there are some people reporting, that they had to use a little piece of paper to get more pressure to the sd-card-retention.

gizmo001i said:
I think you will find that for a larger card, you really need at least a class 6 card so that the card doesn't cause a bottle neck. A class 4 card may be too slow for that size card. I have heard of a few people getting rid of any card problems they had by using a faster card.
Click to expand...
Click to collapse
OK I'll try this, just need to get around to buying a class 6 card. I got similar advice on the Android Forums i.e. class 4 cards for large sizes (8Gb and up) being too slow for this phone.

I.me.myself said:
Hi folks,
I`ve had the same problems with my sd-card on my GT540 ! (SanDisk 8GB SDHC)
So, try to solve it - the same way, I`ve solved it before !
No warranty ! And, please, do not blame me, if it will not work on your phone !
........................................................................................................................................
Put the SD-CARD out of your PHONE and into an SD-CARD ADAPTER !
Plug it into your PC, make a BACKUP of all of your files !
Use GEDIT to erase all Partitions on your SD-CARD !
Create a new EXT2 Partion + Format it to EXT2 again !
Use GEDIT to erase all Partitions on your SD-CARD !
Create a new FAT32 Partition + Format it to FAT32 again !
Put the SD-CARD out of the ADAPTER and into your PHONE !
Start your PHONE, let it boot up + recognize + load your SD-CARD !
Try to make a PHOTO + to store it on your SD-CARD !
NO ERROR MESSAGES OCCURED UNTIL NOW ??? THEN EVERYTHING IS O.K: !!!
Click to expand...
Click to collapse
This did not solve the problem, I think it's just the class 4 card being too slow.

I've similar problem. My brother and i have LG GT540. I've 16GB SD-Card and my brother has a 8 GB SD-Card.
In his phone 8 GB SD-Card doesn't work correctly but in my phone works fine. I didn't know what is damaged, his phone or SD-Card
In brother phone, SD-Card doesn't format correctly and after this process, phone won't mount SD-Card and i get notification that SD-card is empty or damaged ;/
I will trying my 16 GB SD-Card into brother phone.

Just pass by to remind you all guys the always unmount card properly b4 take it out cause it can get so corrupted and change to raw file system as me, then r.i.p to your sdcard
Sent from my GT540 using XDA App

lavero.burgos said:
Just pass by to remind you all guys the always unmount card properly b4 take it out cause it can get so corrupted and change to raw file system as me, then r.i.p to your sdcard
Sent from my GT540 using XDA App
Click to expand...
Click to collapse
When my SD card change to raw file system, i'm repairing her by EASEUS Partition Master

G3 Not booting with a 4gb micro SD card

So I was using Kyrillos' 4.1 non OC ROM and I wanted an app to take snapshots of my phone and downloaded picme... After installing it, it asked for superuser allowance and I gave it but the phone froze... I rebooted and it stuck on the booting logo (green android with a circle)... I tried taking out the micro SD and it booted fine. So my problem is with my 4gb micro SD. I formatted it both with windows and EASEUS Partition Master Home Edition but still it doesn't work. I even had EASUS to check my SD for bad sectors, but nothing... I flashed Kyrillos' new 5 beta ROM but still it freezes on the boot logo... It's weird because my SD card has only 1 partition and no bad sectors. Help please?

Try another sd?

Humpie said:
Try another sd?
Click to expand...
Click to collapse
I did try the SD the phone came with but my non-working SD card is my bigger one... 4gb capacity. My point is that my SD card is usable on any other device except my phone until recently

clarkkov said:
Format your non working SD.
Sent from outer space!
Click to expand...
Click to collapse
I already did... In FAT32 and still nothing

clarkkov said:
Format it to ext. Kikiriki rom requires sd to be in the phone when flashing, it places swap and app2sd onto sd. This is one of the reasons you shouldnt use custom c#ap. If it does not work in ext, reflash kiki rom with this sd inside the phone. If it does not work after this, say good bye to your sd, kiki has fried its mbr.
Sent from outer space!
Click to expand...
Click to collapse
Who talked about Kyrillos' rom being crap... Sorry but it is way ahead of most ROMs... Even for Galaxy 3 the speeds are light fast and I never ever had any problems with the ROM again... Some people like to push their stuff to the limits and not get everything a company gives them. Do we have an official Froyo update from Kies yet? Nope! Hence the custom ROM

I got it working... I formatted it to EXT2 and then formatted it again on my phone, and my phone can boot with the 4gb sd... Thanks clarkkov !!!

external SD card problem.

when i connect my phone to pc. then turn on usb mount allow pc to read SD card. all good.
but after completed copying data to/from. dissconect GS2 from pc. then SD card crashed. i need to format it again.
it happen to my twice.
did you have this issues?
Sent from my GT-I9100 using XDA Premium App

Format card in Windows FAT 32 for starters .
jje

never.
and my sd card is 9 months old,
used with a galaxy s1 and now with an s2.

I did.
it seem to me the firmware prolem.
Sent from my GT-I9100 using XDA Premium App

No problems here... Cognition 1.51 + Ninph 2.1.3

I had that a lot until I moved to KH3 (stock odex) with Speedmod.
All good now.

blackspp said:
I had that a lot until I moved to KH3 (stock odex) with Speedmod.
All good now.
Click to expand...
Click to collapse
Will give a try. Thanks

my problem is a little different~
sometimes i restarted my phone but the it could not read my SD. i had to reinstall the SD and then restarted again.
i doubt it was my SD problem.

sophiemith said:
my problem is a little different~
sometimes i restarted my phone but the it could not read my SD. i had to reinstall the SD and then restarted again.
i doubt it was my SD problem.
Click to expand...
Click to collapse
I get this problem too... I find that it also has a read error when I shake the device aggresively... requiring me to remove the SD and reinsert it... it probably wouldn't be too bad if the SD & Sim card had swapped places, at least then you wouldn't need to power down your device to remove & reinsert the SD card...

[Q] NexusHD2 SD Card Problem

Hello! I recently went the route of installing tytung's NexusHD2 Gingerbread ROM and have run into a sort of bothersome issue. Basically everything works fine (Flashed HSPL, new Radio, MAGLDR 1.13, Clockwork, NAND NexusHD2 ROM), but my 16GB microSD card is not recognized by Gingerbread. I got this microSD card with the device and am currently using a 1GB card instead due to the fact that I get no response from Android upon insertion. I formatted the card to FAT on multiple computers and multiple OS's, all of which seem to have no problem viewing content from the card. To be more specific it is a Sandisk MicroSDHC, and I'm 100% sure it came with my T-Mobile HD2. Any ideas? Thanks in advance!

I have a similar problem. I flashed my HD2 to the Nexus Rom as well, but when i received the phone it only came with a 4gb memory card. I recently bought a 16 gb to fit more apps and music but since ur having a problem with it i am hesitant to insert it. What are your thoughts?
Sent from my Nexus One using XDA App

There shouldn't be a problem inserting it, I've tried many times and it hasn't effected the card at all. Give it a go and maybe you will have better luck than me. Could be my card I suppose.

Hey guys heres an easy solution.
Put ur phone into clockworkmod, and go to advanced, and parition sd card.
Fixed
Sent from My NexusHD2 2.3.7 using XDA Premium App

I didn't think of that! Works great now, thanks a ton

what kind of size did you use on the partition ?

Sitech10 said:
what kind of size did you use on the partition ?
Click to expand...
Click to collapse
I believe I selected 128? What does that effect anyway? I have seen that some ROMs require specific partition layouts correct?

Ok i have clockworkmod but i forgot how to use it or how to get to it. Lol but what does the partition do to the sd card anyways?
Sent from my Nexus One using XDA App

Fix SD Card Issues(Formatting,Mounting,Errors,Corruption or even Death of Card)

For Guys who have issues with SD Cards (Formatting,Mounting,Errors,Corruption or even Death of Card) :
A full format (uncheck quick format)running HP USB Disk Storage Format Tool is recommended.
Moreover,never ever use SD card Adapters for formatting.Always USB card readers as they are more efficient.
Generic operating system formatters don’t provide the optimum performance.And,sometimes,can result into SD card death and less picture-saving space.
Full format once in awhile is recommended to prevent possible corrupt files, lengthen the life of the card and achieve the most available space possible.
This tool is compatible with Windows XP and vista however Windows 7 users can run this tool in Compatibility mode for Windows 7 by going through :
Properties>Compatibility>Compatibility mode>Check(Run this program in compatibility mode for)>Select Windows 7 from dropdown menu>Apply>OK
Click to expand...
Click to collapse
Cheers!!!:good:

1 question man. One of my sd card doesnt even read when i insert it to pc. Will this software solve the problem? I think the sd card is corrupt.
Sent from Hell!!

.xxx. said:
1 question man. One of my sd card doesnt even read when i insert it to pc. Will this software solve the problem? I think the sd card is corrupt. Sent from Hell!!
Click to expand...
Click to collapse
Yep,a full format(uncheck quick format) using this tool should solve your problem.I was facing the same issue with one of my cards.
Don't used SD card Adapter for formatting,use a USB card reader.Hope it will get your card back in action.
You can also run surface test using MiniTool Partition Wizard to check any read error in your SD card's memory blocks.
(Right click on your card>surface test)
Good luck:good:

optimusodd said:
For Guys who have issues with SD Cards (Formatting,Mounting,Errors,Corruption or even Death of Card) :
A full format (uncheck quick format)running HP USB Disk Storage Format Tool is recommended.
Moreover,never ever use SD card Adapters for formatting.Always USB card readers as they are more efficient.
Generic operating system formatters don’t provide the optimum performance.And,sometimes,can result into SD card death and less picture-saving space.
Full format once in awhile is recommended to prevent possible corrupt files, lengthen the life of the card and achieve the most available space possible.
This tool is compatible with Windows XP and vista however Windows 7 users can run this tool in Compatibility mode for Windows 7 by going through :
Cheers!!!:good:
Click to expand...
Click to collapse
Can we foormat or reinstall an death usb micro sd adapter ?
Sent from my HTC Wildfire using xda premium

Pator57 said:
Can we foormat or reinstall an death usb micro sd adapter ?Sent from my HTC Wildfire using xda premium
Click to expand...
Click to collapse
Sorry,I didn't get you.
SD adapter is used to make your micro SD usable on normal SD slot devices.It is not any type of memory.
If you are reffering to a dead micro SD card,a full format (uncheck quick format) using this tool might fix your problem.
Always use USB card readers for the formatting process.

optimusodd said:
Sorry,I didn't get you.
SD adapter is used to make your micro SD usable on normal SD slot devices.It is not any type of memory.
If you are reffering to a dead micro SD card,a full format (uncheck quick format) using this tool might fix your problem.
Always use USB card readers for the formatting process.
Click to expand...
Click to collapse
I don't want to be a smart-ass here but seriously... Initially I thought you'd mean a card reader with "SD adapter"... if you're speaking about micro sd adapters: nothing wrong to use those as it's just a kind of "connector extension" - the only thing that might go wrong is that the slot has a mechanical problem. That usually would end up in getting nothing formatted
Anyway thx for the hint with the application - could become useful some time

optimusodd said:
Sorry,I didn't get you.
SD adapter is used to make your micro SD usable on normal SD slot devices.It is not any type of memory.
If you are reffering to a dead micro SD card,a full format (uncheck quick format) using this tool might fix your problem.
Always use USB card readers for the formatting process.
Click to expand...
Click to collapse
ho ****.And yes i was talking about an micro sd adaptater who died..
Sent from my HTC Wildfire using xda premium

After an update of the play store my phone registered my card as being "not recognized"
Is this likely to fix the problem? - My computer recognizes the micro sd...
Sent from my HTC Wildfire using xda premium

THE-M1GHTY-BUKO said:
After an update of the play store my phone registered my card as being "not recognized"
Is this likely to fix the problem? - My computer recognizes the micro sd...
Sent from my HTC Wildfire using xda premium
Click to expand...
Click to collapse
What is the size of your SD card ?Probably,it's running out of space.
Format your card from within the phone settings first(Settings > Storage).
You will need this tool if that doesn't help.

Pator57 said:
ho ****.And yes i was talking about an micro sd adaptater who died..Sent from my HTC Wildfire using xda premium
Click to expand...
Click to collapse
LOL,this tool can't fix your dead adapter.:silly:You need a new adapter.

eventcom said:
I don't want to be a smart-ass here but seriously... Initially I thought you'd mean a card reader with "SD adapter"... if you're speaking about micro sd adapters: nothing wrong to use those as it's just a kind of "connector extension" - the only thing that might go wrong is that the slot has a mechanical problem. That usually would end up in getting nothing formatted Anyway thx for the hint with the application - could become useful some time
Click to expand...
Click to collapse
Yeah,of course,you can transfer files using adapters but USB card reader is recommended for the formatting process.
This tool was created specifically for HP USB devices so only a USB SD card reader can be used as interface device.
The most amazing thing about this tool is ,it does a very deep cleansing.While other formatting tools take 3-4 mints to format an 8GB SD card,this tool takes 4-5 hours to ensure most efficient formatting.I have used and verified this tool personally.Using generic formatting utilities don’t provide optimal performance for your SD cards.
I just thought it might be good to list a tip that might help others with their SD card issues.

I wonder :S
Hi I have a 8GB MicroSD card, suddenly it went slow down.. I formatted it using various applications but it doesn't affect it takes so long to paste a file(s) I dunno but it ask around 25 minutes to paste a 250MB file and sometimes it increases to hours.. I didn't even found any bad sectors.. every sector is ok but it's useless without fast data writing.. anyone ever faced this type of matter? :crying:

I NEED HELP!!! I have a 32gb micro sd card and the above process does not work.

Why is this here? Shouldn't it be somewhere like hardware and software hacking or something...
Anyway dont use adapters makes no sense, like that one guy just said: Its just ... ...
However im not on sense rom so i may make no sense myself

Hi
I need some help. I think my 2gb sdcard got corrupted and my willy doesnot reads it anymore although i have tried another sdcard and it works.
So problem is with sdcard. My computer wont recognise it too ( i tried it with my wildfire not with any card reader or adaptor )
I download that hp exe file but how can it work if my pc doesn't reads sdcard ?
Is there a way that i can use any software and plug sdcard in an adaptor ? And format it etc ?
Because i dont own an adaptor or a usb card reader. I'll probably lend an adaptor today but for usb card reader i'll have to wait for a day or two
I really need my sdcard working
Now i have 2 corrupted sdcards.
2gb card and 4 gb card.
Btw will my pc read the sdcard or show it if i use an adaptor ? Coz i've never used it before.
Sent from my HTC Wildfire using xda app-developers app

alamgirqazi said:
Hi
I need some help. I think my 2gb sdcard got corrupted and my willy doesnot reads it anymore although i have tried another sdcard and it works.
So problem is with sdcard. My computer wont recognise it too ( i tried it with my wildfire not with any card reader or adaptor )
I download that hp exe file but how can it work if my pc doesn't reads sdcard ?
Is there a way that i can use any software and plug sdcard in an adaptor ? And format it etc ?
Because i dont own an adaptor or a usb card reader. I'll probably lend an adaptor today but for usb card reader i'll have to wait for a day or two
I really need my sdcard working
Now i have 2 corrupted sdcards.
2gb card and 4 gb card.
Btw will my pc read the sdcard or show it if i use an adaptor ? Coz i've never used it before.
Sent from my HTC Wildfire using xda app-developers app
Click to expand...
Click to collapse
I doubt it'll help!
This tool was designed to format flash drives and it does a deep format,which is helpful in removing problematic partitions from those drives(sd cards).
I have been using this tool for good 2 years now,it has helped me curing pen drives,sd cards which were already readable on windows.(cured issues like i/o errors,cyclic redundancy issue,etc.).But if windows doesnt read it then I doubt it'll help.
Try with some linux system if you have.But,you can consider your card to be dead sadly.

Wasimk32 said:
I doubt it'll help!
This tool was designed to format flash drives and it does a deep format,which is helpful in removing problematic partitions from those drives(sd cards).
I have been using this tool for good 2 years now,it has helped me curing pen drives,sd cards which were already readable on windows.(cured issues like i/o errors,cyclic redundancy issue,etc.).But if windows doesnt read it then I doubt it'll help.
Try with some linux system if you have.But,you can consider your card to be dead sadly.
Click to expand...
Click to collapse
Nooooo
I cant just let go 2 sd cards go away easily and also i've no extra sdcard at the moment. And i doubt i'll get another one soon.
I dont have a Linux OS but i think there's gotta be a way. I searched alot so far but had no luck uptill now.
My suggestion to everyone: PLEASE TAKE SOMETIME OUT OF YOUR LIFE AND ALWAYS REMOVE THE SDCARD SAFELY.
Please some more suggestions guyz.
Sent from my HTC Wildfire using xda app-developers app

alamgirqazi said:
Nooooo
I cant just let go 2 sd cards go away easily and also i've no extra sdcard at the moment. And i doubt i'll get another one soon.
I dont have a Linux OS but i think there's gotta be a way. I searched alot so far but had no luck uptill now.
My suggestion to everyone: PLEASE TAKE SOMETIME OUT OF YOUR LIFE AND ALWAYS REMOVE THE SDCARD SAFELY.
Please some more suggestions guyz.
Sent from my HTC Wildfire using xda app-developers app
Click to expand...
Click to collapse
Exactly!
This shows you the importance of spending those 2-3 seconds in removing it safely and also having backups of your stuff!

Wasimk32 said:
Exactly!
This shows you the importance of spending those 2-3 seconds in removing it safely and also having backups of your stuff!
Click to expand...
Click to collapse
Yeah
Sent from my HTC Wildfire using xda app-developers app

I cant do that , when using that tool it says "Failed to format the device". Plzzzz helllpppp