usb device not recognized after screen replacement - Legend General

hi,
my legend had a problem with its screen i changed both the lcd and the digitizer but since then the pc doesn't recognize it, it only charge via the pc
is there any solution?

You must give more details (is your phone rooted?)
The screen shouldn't have anything to do with USB Mass storage. Like you, I've had this problem but only because I have rooted my phone and it was easily fixed by reflashing the rom via recovery mode. However make sure you've tried all the simple solutions (checking the "USB debugging" box) before reflashing your current or new rom.
Sent from my Legend using xda premium

it is rooted, and i tries more than one rom (cm7 and newsense) both nothing, the legend itself don't show anything in the notification area like before, it just charge, i tried running usb tether but it says that the usb is not connected

Okay, so if you have already tried reflashing (and it didn't work) then I have no idea what to do (method worked for me). The USB cord may be faulty or the USB is bricked (there is guide to unbricking USB on HTC legend around this forum, have a look). Best advice I can offer is to unrooted your phone and give it back for warranty (but only do this if all hope is lost).
Sent from my Legend using xda premium

Related

Rooted Evo will not connect to PC

I rooted my Evo with unrevoked3 a few months ago and since then (or sometime after) my phone will not connect to my PC. It will charge but that's it. I checked off the ask me every time I connect option, it's set to mount as disk drive. I am using the stock usb cable that came with the phone. I tried hard resetting, data wiping back to factory default. Still won't connect. Tried reinstalling HTC Sync. Doesn't recognize my phone being plugged in. I want to flash my phone back to stock so I can bring it back to Sprint but I can't bring it back rooted and I can't unroot it without using the PC. I have Googled and Googled all over but can't find an answer. I did a search here and there are similar problems but no solutions that have worked for me. Could it be the cable? It is in good condition as is the phone. Maybe the USB port on the phone? Those went bad on all my Blackberries. I'm sure this problem is expressed frequently but a response would make my day.
roblacroix said:
I rooted my Evo with unrevoked3 a few months ago and since then (or sometime after) my phone will not connect to my PC. It will charge but that's it. I checked off the ask me every time I connect option, it's set to mount as disk drive. I am using the stock usb cable that came with the phone. I tried hard resetting, data wiping back to factory default. Still won't connect. Tried reinstalling HTC Sync. Doesn't recognize my phone being plugged in. I want to flash my phone back to stock so I can bring it back to Sprint but I can't bring it back rooted and I can't unroot it without using the PC. I have Googled and Googled all over but can't find an answer. I did a search here and there are similar problems but no solutions that have worked for me. Could it be the cable? It is in good condition as is the phone. Maybe the USB port on the phone? Those went bad on all my Blackberries. I'm sure this problem is expressed frequently but a response would make my day.
Click to expand...
Click to collapse
I am assuming you have a windows based PC.
Do you have any device driver conflicts in your windows Device Manager? I'd start there. Your computer wouldn't properly reconize your phone if you have some sort of conflict or you don't even have the right drivers installed.
Broken usb is a known issue with EVO, something about how it is soldered onto the motherboard. Are you running a custom ROM or kernel?
Have you tried mounting it in Recovery? You can always use a MicroSD card adapter to transfer files. I just use Dropbox.
You can unroot without your PC. Just download everything on your phone.
Download the S-On tool from Unrevoked. Flash it in Recovery. Check to make sure phone is S-On
Download the PC36IMG.zip restore to your phone, there is a thread with it in Development. Use Astro/Root Explorer to move the PC36ING.zip to the base of your SD card.
Go into HBoot and it will recognize it. It'll ask if you want to update, say yes. Let it sit and do its thing.
There is a guide in q&a about unrooting
Sent from my PC36100 using XDA Premium App
Yes, Windows based PC.
So I downloaded the S-On tool, moved it to the root of my card with Super Manager, then flashed it. Says S-On at boot. I rebooted my phone, moved the PC136zip to the root of the sd card. Rebooted with down vol + power and it checks for pc136zip but doesn't ask anything. I tried zipping it in recovery and it says bad. I tried another download site and did the same thing, doesn't recognize it upon hboot, so I tried zipping from sdcard, selected it, it quickly said some text about updating then nothingness. How do I know if it unrooted?
Edit: Also, I checked my device manager on my pc but it didn't show anything wrong.
Install terminal and type su
You will get permission denied if not rooted.
I have a working PC36IMG.zip in my Dropbox, if you need it tell me and I'll PM you a link
if u think ur phone is broke cuz u cant connect to pc after u rooted it, it isnt broke at all. my phone did the same thing after i rooted it. I don't remember exactly cuz it was a while ago, but u may have to turn on usb debugging in settings before it will recognize it. also u can go into recovery and mount usb to write to it
It might have to do with the drivers you have to install when you run unrevoked. It has been a while, but I am pretty sure I had to install a special USB driver to run unrevoked.
Sent from my PC36100 using XDA Premium App
I had this happen to my phone last week after I used my computer to root two other peoples phones.
It makes no sense really, but while in recovery I connected to the computer to move a few files to the phone, and after that it was able to connect whether in recovery or not.
See if your phone can make the connection while in recovery.
Ok, so I brought the phone to Sprint after trying a different USB cord and they said the port is damaged. My new phone arrived today but I need to get my phone back to stock ASAP. I got it back to S-On but when I attempt the pc36img flash it says...
SD Checking....
Loading... [PC36DIAG.zip]
No image!
Loading... [PC36DIAG.nbh]
No image or wrong image!
Loading... [PC36IMG.zip]
Then the black bar loads.
Then it says.
Main Version is older!
Update Fail!
Do you want to reboot device?
I hit yes.
I still have SuperUser Permissions.
I've downloaded a few different pc36img.zip from different pages and this happens every time.
Edit: Probably wondering how I did this without a USB. I bought an SD Card reader and transferred everything through PC.
Try this.
1. Plug your usb cable into the computer.
2. Plug your usb cable into the phone.
3. Wait and listen for the little sound that tells you that the computer sees it.
4. Unplug your USB cable from the phone and wait about 2 seconds.
5. Plug the USB cable back into the phone, listen for the sound, then look at the computer monitor.
On mine, I have to do this to make the autorun window pop up running Windows Vista.
Shot in the dark, but thought it might help.
Noise doesn't happen. USB port is damaged, noise will never happen.
On the upside,
(I don't have 8 posts yet or I would show the download image) Updated version of PC36IMG.ZIP that worked. Just rename to pc36img and it unrooted my phone.
I'm having this same problem. Now, In this case, I hear the noise. Then a second double noise (like when you unplug the usb) This happens whether I am in recovery or not. Also, oddly enough, the thing works on my mac. It's done this through several different ROMS Right now I'm using synergy (which is great btw). I'm really at a loss here. Anyone got any other ideas? Like where I can find it in device manager. There are like 9 "root usb" devices
*edit* Also, I'm using window's XP proffessional. I've tried some trouble shooting but nothing is really working. Also it's being assigned a disk letter when connected, during the short time (like less than a second) when the disk pops up it says removable disk. I timed it and it's being assigned H, but it's being ejected almost immediately.
I think it has something to do with power being supplied in the cord. Maybe something to do with kernal? I dunno. But I plugged it into a usb port in the back of my pc, and it read it : /
roblacroix said:
I rooted my Evo with unrevoked3 a few months ago and since then (or sometime after) my phone will not connect to my PC. It will charge but that's it. I checked off the ask me every time I connect option, it's set to mount as disk drive. I am using the stock usb cable that came with the phone. I tried hard resetting, data wiping back to factory default. Still won't connect. Tried reinstalling HTC Sync. Doesn't recognize my phone being plugged in. I want to flash my phone back to stock so I can bring it back to Sprint but I can't bring it back rooted and I can't unroot it without using the PC. I have Googled and Googled all over but can't find an answer. I did a search here and there are similar problems but no solutions that have worked for me. Could it be the cable? It is in good condition as is the phone. Maybe the USB port on the phone? Those went bad on all my Blackberries. I'm sure this problem is expressed frequently but a response would make my day.
Click to expand...
Click to collapse
Alohaz I've had this happen 5 different times and it turned out to be the custom hboot needed for unrevoked after reverting back to original no could recognize phn
unrevoked mess up my 3 evo.
all diag port gone away.
i cant program anymore with qpst,cdma ws etc.
how to fix??

USB problem with HTC Desire HD

Hey guys,
I currently recently installed a custom ROM from this website and for some reason now when I plug in my USB into my PC it comes up not being detected so when I put my phone as hard drive so I want to transfer music, it doesn't detect it. Can anybody help me if this is ROM problem or just my USB?
Hey,
Okay I disabled USB debugging didn't know it was on, still doesn't work says windows cannot find USB device not reconginzed when I connect the USB. For the Reinstalling usb driver I do not know how to this ~?
i have the same problem.. turn "fast boot" off and restart the phone.. this always works for me.. hope this helps
Hey, I turned fastboot off. Doesn't work. I ordered new usb cable.. hopefully this works and it was just a fault with the cable!
Sent from my Desire HD using XDA App
Usually this is a problem with the cable. Simple, cheap to fix. Keep your old cable around for charging though (nice to have a spare)
Is this problem with the USB still active?
If so try a different PC just in order to eliminate WinOS issues.
If not close.
Hi,
I have the same problem at some months ago. I tried the cable and pfone on another PC, and it works fine. So, I recommend to try it on another PC and reinstall your Windows.
brgs,
Herold
Had the same propblem! Turns out it was the usb cable, it charged fine with the cable but data transfer didnt work.
i also had the same problem since last week and still cant resolve till now...i try all the option that u gave(change cable/pc,turn off fastboot)....i even sent my phone to shop and they still cant detect.they said maybe the usb port is damage or some software that may block my usb port?is it true? anyone can help?????
necrs said:
i also had the same problem since last week and still cant resolve till now...i try all the option that u gave(change cable/pc,turn off fastboot)....i even sent my phone to shop and they still cant detect.they said maybe the usb port is damage or some software that may block my usb port?is it true? anyone can help?????
Click to expand...
Click to collapse
What happened last week? Is that when you got the phone? Or installed a different rom? etc.
Grant Barker said:
What happened last week? Is that when you got the phone? Or installed a different rom? etc.
Click to expand...
Click to collapse
before this is ok.just last week i remember that i pull the usb cable from the phone quite hard.but i don think that the usb too sensitive that will break by that.still can charging... but not detected in pc
I had similar problem and it was hardware, I sent it back to Vodafone and they sent me a replacement!
I am running CM7 now its awesome.
Andy
USB BRICK in my INSPIRE 4G ( DESIRE HD)
Hi, all
I got a new inspire 4g last week.( equivalent to desire hd ). It was working fine. But now it does not detect the USB connection. It only charges when I connect to pc. No other issues. I have also noticed that during fast boot mode also pc does not recognize the phone as device. I have tried all the suggestion on xda but no luck.
As fastboot is also not detected by PC I could not format mtd0 and reconfigure it.
Can anybody have any other idea? If I change the main board how much cost will incur ??
Thanks all.
Grant Barker said:
What happened last week? Is that when you got the phone? Or installed a different rom? etc.
Click to expand...
Click to collapse
musarraf172 said:
Hi, all
I got a new inspire 4g last week.( equivalent to desire hd ). It was working fine. But now it does not detect the USB connection. It only charges when I connect to pc. No other issues. I have also noticed that during fast boot mode also pc does not recognize the phone as device. I have tried all the suggestion on xda but no luck.
As fastboot is also not detected by PC I could not format mtd0 and reconfigure it.
Can anybody have any other idea? If I change the main board how much cost will incur ??
Thanks all.
Click to expand...
Click to collapse
First of all.. you have HTC Sync installed right?
Happened to me initially as well.. although for me changing the cable and/or changing the USB port on the PC solved the issue. Have you tried these?
Also sometimes killing all apps on the device before connecting helped.
You can try accessing your device through ADB to see if its being detected.
And I really dont think you'll need to change the main board..
USB brick on my Inspire 4G
Thanks for your reply. When I go the phone ADB and Fastboot were working
well. There was no driver issue. Now even PC also does not detect the phone or any new hardware when I connect it to pc. I had working fastboot on both win7 and Linux (ubuntu) pc. Now in both OS the phone is not detectable. Windows device manager does not see any new hardware when I connect my inspire . dmesg also does not show my hardware when I connect my inspire to linux pc.
Please help or suggest me to investigate further. I know how to install and work with adb and fastboot as well as Clockwork recovery ( also ext recovery). Some people suggested to flash a new radio. I can flash the new radio via sdcard. But how safe is it ? My phone is S-off and made unbranded. Will flashing a new radio make my phone locked AT&T again? ????
Thanks a lot
if4ct0r said:
First of all.. you have HTC Sync installed right?
Happened to me initially as well.. although for me changing the cable and/or changing the USB port on the PC solved the issue. Have you tried these?
Also sometimes killing all apps on the device before connecting helped.
You can try accessing your device through ADB to see if its being detected.
And I really dont think you'll need to change the main board..
Click to expand...
Click to collapse
As far as I know.. USB problem has no relation whatsoever to Radio. Radio is only concerned with the signal stuff. Flashing it isn't that risky if you follow the instructions... There's a thread in the development section about Radio's which explains it pretty nicely.
As for the USB problem, are you using a Custom ROM? Some ROMs like LeeDroid have USB detection problem which can be solved simply by flashing a different kernel like LordMod's.
What I meant by "Accessing through ADB" was if commands like "adb remount" or any adb command as such are working when your phone is connected to the PC? Or is it showing "error: device not found"?

Help please... Can't boot or get pc to see phone

Problem:
my darn phone won't boot unless I use same battery. I can't get my laptop to recognize phone even in boot loader mode. The only way I can boot phone is to battery pull or plug it in. I'm stuck. Can't odin without pc seeing it, wives phone works great same pc same cable same batteries. Can't shut it off as plugging it in reboots it.... Can't do usb storage....
Tried:
1) I installed several roms after clearing everything, factory reset, and nothing works. I even reinstalled clockwork. Please help.... 2) my wived phone works with my pc and other batteries.
3) wives phone on same rom
4) I have same issue from stock rom or my current rom clean gb even without any personal apps or changes
Please help.
Sent from my SPH-D700 using XDA App
Try putting it into download without a battery. Have Odin ready, plug in usb cable without battery in then put it into download mode. Odin in EC05 stock tar, then root and flash after that.
Sent from my SPH-D700 using XDA App
Dang..... Nope..... Pc doesnt reconize.....i had fingers crossed.. Hummm.. ItS like phone is stuck in some sort of boot mode....
Awhile back i deleted the boot animation and shutdown animation files... I wonder if that did something. Since then clean gb rom has installed new animations files which work..
Sent from my SPH-D700 using XDA App
Not to sound dumb, but are you using the same cord as your wife to try and make transfers? I have a computer in my living room, with 2 different USB Cords that my wife and I use for charging in the evenings. One of them connects to the computer properly, the other is unreliable for data and wont ever recognize a phone attached to it. Figured I'd ask so you can rule that out.
Also if the USB port is plugged into a hub, or front of the PC, try moving it to a USB port in the back of your PC that is directly attached to the motherboard. Also make sure there is nothing inside your phone USB slot. I have had some crap get in there (hence the slider on top I NEVER close when I unplug it, ) and it wouldn't connect to PC either.
These are both obvious solutions but we might as well try and start there. Let me know. I'd say uninstall/reinstall the drivers on the computer also, but if one phone works, and the other doesn't so it's not the drivers.
I had a similiar problem where my GF's phone connected fine with USB debugging on but my phone wouldn't. Tried goin back to stock...everything. Finally just put USB debugging on, plugged my phone in, went to Device Manager and where it said Samsung Android, I hit update drivers from Windows Update. Took like 20 minutes but everything worked fine after that.
I am using same chord and port as I did with my wives phone. Good question. I cleaned the contacts in the usb port still nothing. I had usb debugging on... Just tried it with it off nothing.... I really think I may have garbage data or something messing it up. When I installed ask these roms over the last year I only cleared data like once every 10-20 rom loads our when the rom did it itself. I've never had any issues til now.
Sent from my SPH-D700 using XDA App
Did you reinstall all 5 drivers and then try to Odin back to stock with battery out?
I have reinstalled all the drivers and used my wifes phone to compete installs as it wouldn't recognize mine. once we figure this out I will certainly odin to stock and start clean!
Sent from my SPH-D700 using XDA App
Dumb question.... is your wives phone the same phone as yours? ..... try going to the samsung website. Navigate to your phone and you can grab the drivers from there....
That's how I got mine.
Sent from my Cyanogen Epic.
troyolson92 said:
I have reinstalled all the drivers and used my wifes phone to compete installs as it wouldn't recognize mine. once we figure this out I will certainly odin to stock and start clean!
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
If it comes up as unknown device then you'll need to go into the device manager and unistall the software for it. Then advance install the drivers for the unknown device it should then recognise the phone and install the Samsung usb composite device, gadget serial control, and the Samsung mobile Modem. Hope this helps
Sent from my OG Epic
Try these drivers may make a difference its for win 32 bit
Thank you and every one for your help! I will try to install the driver file you attached. I do appreciate your help.
wife has same phone exact same setup as mine. What keeps driving me crazy its her works fine, mine is unknown device. I will try to install drivers again as suggested.... I'll report back in the morning,.thank you!
Sent from my SPH-D700 using XDA App
Yeah seems like wth its the same phone ^^. But make sure you open the zip and get the drivers out. Let me know if that works I've seen this problem with certain computers it has something to do with itunes sometimes I'm sure you have itunes and if you don't then its windows sometimes needs to be reinstalled.
Sent from my OG Epic
Samsung Galaxy S2 Stuck in ODIN Mode
I too have a similar issue.
My Sprint Samsung Galaxy S2 fails to connect to my computer (also tried another computer and different usb cable), after a failed attempt to upgrade to ICS 4.0. The phone will not load up now to 'normal' operating mode.
It will only come up to the message:
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I can no longer get into Recovery or Download modes. At least none that work. (See below)
I also built and tried the USB jig solution, which does power on the phone, but it then comes up and says:
ODIN MODE
PRODUCT NAME" GT-19100
CUSTOM BINARY DOWNLOAD: YES (2 counts)
CURRENT BINARY: SAMSUNG OFFICIAL
Downloading...
Do not turn off target!!
Any ideas?
Perhaps you can ask in the correct Epic Touch thread instead of the Epic with the keyboard thread. More likely someone there will be able to help you.
Sent from my SAMSUNG-SGH-I717 using xda premium

Mounting USB and SD Card problems

Hey guys, I am having a bit of issues trying to get the Internal Storage to connect properly to my computer. I rooted and flashed RA Recovery yesterday and flashed Protekk's AOKP ROM, but now I'm not able to plug my tablet into my computer.
I thought it wouldn't work without USB drivers, so I tried to install them, but all it's giving is three quick beeps (the beep you hear when a USB device is connected).
I looked in the thread, but nobody mentioned a big issue like that, so I think there may be something that I am doing wrong.
Any help would be greatly appreciated! Thanks!
I'd also like to add that when I plug it into the computer, the USB Debugging icon appears on the tablet, so it's still getting somewhat recognized.
Sent from my SGH-T989 using xda premium

[Q] My phone cannot connect to Computer, help me please...

Hey guys, has anyone face this problem like me. I'm not sure what I did wrong with my phone, but when I connect via USB cable to computer it doesn't recognize my phone. Usually, when we connect it to computer it will pop up saying that "Charge Only" and USB Debugged Connecting. But for me my phone nothing happen, just normal charging.
I tried to switch to various different ROM from Gingerbread to ICS and ICS to HTC Sense 3.5, but still the same. Still not recognize by the computer.
Help me please...
Still kinda a noob so I may sound stupid for this but do u have the correct drivers for the phone installed on your computer
Sent from my Dark Unicorn Resurrected v.2.5 using xda premium
virakcam said:
Hey guys, has anyone face this problem like me. I'm not sure what I did wrong with my phone, but when I connect via USB cable to computer it doesn't recognize my phone. Usually, when we connect it to computer it will pop up saying that "Charge Only" and USB Debugged Connecting. But for me my phone nothing happen, just normal charging.
I tried to switch to various different ROM from Gingerbread to ICS and ICS to HTC Sense 3.5, but still the same. Still not recognize by the computer.
Help me please...
Click to expand...
Click to collapse
Is it possible that you disabled the pop up?
If it doesn't seem to be a software problem, have you tried using a different USB cable? This would be the most likely problem for you, in my opinion.
Sent from my HTC Amaze 4G using Tapatalk 2
Well, before connect to each other normally. I am not sure what I did wrong with it. I did try various cable. But still the same. I will try to install the Driver again. Thanks for your suggestion.
virakcam said:
Well, before connect to each other normally. I am not sure what I did wrong with it. I did try various cable. But still the same. I will try to install the Driver again. Thanks for your suggestion.
Click to expand...
Click to collapse
The driver came on the root of you sd card when the phone was new. If that doesn't work try pdanet
Sent from my MyTouch 4G using xda app-developers app
Well, I already tried all these ways. Still not working. I even try to restore to the previous back up that the SD card is working by that time. But nothing happen still. Look like it is a hardware problem.:laugh:
Have you looked at the device manager for devices with an exclamation point? Make sure you have the "show hidden devices" checked.
On your pc re-install the phone driver but first uninstall the original driver through control panel>programs. After the uninstall, plugging in your phone to your PC should bring up the unknown device pop up (then the new hardware installation dialogue). If not then the pc isn't picking up your phone, check the cable, maybe try a different cable/ usb port.
If all else fails, some mytouch custom roms on these forums borked usb, there was a workaround for that, something you could flash. I remember seeing it in some of the threads... Wish I could remember the name. It was around Cyanogen 7.1 mods/ports (before rc 7.2 was out). Maybe somebody else remembers..
Sent from my Frosted Cherry ParanoidAndroid v 1.5a3
It could be a failed USB connector in the phone. Much, much higher probability than "borked USB". Especially if he installed several custom ROMs and didn't have anything.
Very easy to tell:
Boot to bootloader (power off, then power on + Volume Down), choose "FASTBOOT" (with VolDown and Power buttons), connect USB. If you'll see "FASTBOOT USB" showing up instead of "FASTBOOT" - it means USB is working. If not - most likely USB plug in the phone is dead, or something wrong with your computer's USB ports.
you need to install the HTCdriver before connected the myTouch to computer. I think I downloaded it from the official myTouch 4g website, some mytouches have it in their sd card...
virakcam said:
Hey guys, has anyone face this problem like me. I'm not sure what I did wrong with my phone, but when I connect via USB cable to computer it doesn't recognize my phone. Usually, when we connect it to computer it will pop up saying that "Charge Only" and USB Debugged Connecting. But for me my phone nothing happen, just normal charging.
I tried to switch to various different ROM from Gingerbread to ICS and ICS to HTC Sense 3.5, but still the same. Still not recognize by the computer.
Help me please...
Click to expand...
Click to collapse
windows update woud install your drrivers if u need more help pm me
Jack_R1 said:
It could be a failed USB connector in the phone. Much, much higher probability than "borked USB". Especially if he installed several custom ROMs and didn't have anything.
Very easy to tell:
Boot to bootloader (power off, then power on + Volume Down), choose "FASTBOOT" (with VolDown and Power buttons), connect USB. If you'll see "FASTBOOT USB" showing up instead of "FASTBOOT" - it means USB is working. If not - most likely USB plug in the phone is dead, or something wrong with your computer's USB ports.
Click to expand...
Click to collapse
Hi, I've tried your suggestion. And the Fastboot USB didn't pop up. So that mean something wrong with it. Do you have any solution for this. Appreciate your help.
If no "install driver" or "unrecognized device" popped up at the computer - just to be sure, try a different computer. If still nothing pops up on the computer - it means you have to fix the USB socket of the phone, and it means you have to submit it to a lab (unless you're good with micro-soldering and have all the tools, including microscope - but it doesn't seem to be the case). It's a physical problem, and can't be solved with software - no builds/ROMs/etc can make metal contact
Jack_R1 said:
If no "install driver" or "unrecognized device" popped up at the computer - just to be sure, try a different computer. If still nothing pops up on the computer - it means you have to fix the USB socket of the phone, and it means you have to submit it to a lab (unless you're good with micro-soldering and have all the tools, including microscope - but it doesn't seem to be the case). It's a physical problem, and can't be solved with software - no builds/ROMs/etc can make metal contact
Click to expand...
Click to collapse
You are right. I think it is the hardware problem too. Because I just got a Micro USB port broken and I went to the phone repairer to fix it. After I got it back for a couple day and flash new ROM. The USB is no longer working. Will return it to them.
Thanks for your time
I had the same problem. I just formated the system and then flashed the same room and that worked for me. Hope it helps
Sent from my HTC Glacier using xda premium
INFINITYandONE said:
I had the same problem. I just formated the system and then flashed the same room and that worked for me. Hope it helps
Sent from my HTC Glacier using xda premium
Click to expand...
Click to collapse
Well, I already tried this method already. Didn't work for me. I even restored to the previous back up via Clockworkmods to the ROM with SD card mounting. But still not work. Format SD card, not working too. I've tried all the method. I think it's a hardware issue. Thanks
virakcam said:
Well, I already tried this method already. Didn't work for me. I even restored to the previous back up via Clockworkmods to the ROM with SD card mounting. But still not work. Format SD card, not working too. I've tried all the method. I think it's a hardware issue. Thanks
Click to expand...
Click to collapse
FLASH THE STOCK RUU this should fix all your problems.
http://forum.xda-developers.com/showthread.php?t=1074355
and post back
tawhid111 said:
FLASH THE STOCK RUU this should fix all your problems.
http://forum.xda-developers.com/showthread.php?t=1074355
and post back
Click to expand...
Click to collapse
What is this by the way? Is it the orignal ROM from tmobile? I already tried this event before you suggest me but it doesn't work either. Thanks.
virakcam said:
Well, I already tried this method already. Didn't work for me. I even restored to the previous back up via Clockworkmods to the ROM with SD card mounting. But still not work. Format SD card, not working too. I've tried all the method. I think it's a hardware issue. Thanks
Click to expand...
Click to collapse
R u trolling? Because if u can mount USB in recovery USB should be fine. Unless its your PC or some files on ur phone r corrupted. Try fastboot comnand. Fastboot OEM enableqxdm 0

Categories

Resources