Related
Hello. I've seen and heard people installing two ROM's on their devices such as Motorola Defy and Motorola Atrix4G. Is the same possible on the Zte Blade? I've searched the forum and haven't got any information regarding the above.
Sent from my Blade using XDA app
not easily, no.
---------- Post added at 06:38 PM ---------- Previous post was at 06:03 PM ----------
Somebody would need to create an open source bootloader (appsboot.mbn), get it working on the blade, then modify it to add a boot menu & the ability to load roms from the sdcard.
The bootloader we're using is based on lk, source code is available from CAF, but ZTE's modifications that make it work on our phones are closed source.
Hey wbaw,
Have you seen this before: http://forum.xda-developers.com/showthread.php?p=19737327 ?
Moto Defy has a locked bootloader but with 2ndInit + sd partitions and a small app dual boot is possible...
But that being said, [sorry to highjack your thread ] another question would be:
Can we help the Blade's limited available ram by somehow installing the rom on an sdcard partition?
Those scripts aren't going to work on the blade & i'm not sure if it'd be possible to do anything similar. maybe it only works on the defy because it's a locked bootloader & all roms have to use the same kernel?
To do anything like that it'd have to be after the kernel had loaded & we use different kernels for different roms. A kernel compiled for a zte stock rom wont work on cm7 & vice-versa, because of the 2g vmsplit & 3g vmsplit memory allocation differences.
So it wouldn't really work well on the blade unless we can put a boot menu in before the kernel has loaded, in appsboot.mbn so that we can select different kernels to load. It's just difficult because we don't have zte's source code for appsboot.mbn. CAF has a generic version, but then we'd need to work out what zte changed to get it working & that's before anybody could start working on a proper boot menu.
If you create an ext3 partition on your sdcard, using clockworkmod to format it, then you can use some kind of data2ext, like s2e for cm7 or darktremor. That will give you enough room to install every android app you could possibly want. There's no reason to move the rest of the rom to sdcard, you can't do anything else with the internal nand space & you can't easily fill it if you move all your data to the sdcard.
Thanks for the clear answer wbaw - thumbsup!
Well ok then.. I might just forget about trying to work around the Blade low available ram then and keep moving apps to sd whenever possible.
And btw, I've just tried the latest build from burstlam -as I gave details here- and the phone is quite fast and responsive; much better than with the previous Sej7278's Jan18th build I had installed.
No more waiting for ADW to redraw the homescreens when exiting an app: very nice! Camera works fine and I also installed Sej7278's under volt kernel. Again I'm quite happy with the phone's behavior now
Cheers,
/A
Thanks for the info wbaw. Hopefully some day we'll be able to make it possible.
Sent from my Blade using XDA app
I am not the developer, i only ported this great rom to Captivate.
ORIGINAL THREAD: Everything you need to know is written here
Captivate Version changes:
Glitch Kernel 369mb Ram
H3llstorm GPS fix
JHJV9 modem
Internal is SDcard
Removed front camera files
I ported this rom for personal use, but since it was so good and not available here, i thought it was good to share it.
Some Suggestions:
- If you want to change internal/external mount flash one of these zip with CWM
- If you want to change kernel parameters (liveOC, frequencies, governors...) use NSTools (free on Google Play)
- If you want another modem, flash one of these with CWM
reserved
I would love to flash this but every time I do, it aborts immediately. I flashed CM9 then this and still it aborts immediately. Thank you for porting it to the cappy and thanks for your work.
---------- Post added at 09:03 AM ---------- Previous post was at 08:28 AM ----------
Never mind I did get it to flash looks nice.. thank you for your work once again.
I will give a try
Looks nice, about to flash but if we want to change kernels do we have to run the cleaning script or not?
Sent from my SGH-I897 using xda premium
Did you have permission from the original team that made this rom to post this?
one problem--- whenever i change kernel to devil for this rom, it wont let me read my sdcard anymore. I mean internal memory.
Thanks!
A nice ROM, thanks for it.
Thread closed
Permission was not received for this port, links removed.
Hello, I am here to hopefully offer a service to the Arc community that is running CyanogenMod 10 on their Xperia Arc's and Arc S'
I know from personal experience that it is difficult to sometimes find the latest fixes, modules and recommended things to install in the CM10 thread, so I hope to list a collection here for easier access
I will also try and keep this thread as up to date as possible
These tweaks and roms are for the FXP 145 but will probably work on other updates that come from FXP but I will update the thread to say whether they do or not
http://forum.xda-developers.com/showthread.php?t=1780316
APPS & FIXES:
Recommended -
FXP 145 fixes from besttt Contains the latest fixes from besttt
Fix's update Error 7 problems from besttt - Replace META-INF inside the zip file with the one attached in besttts post
Supremacy Script V3 If you have any problems with this script using any kernel other than LuPuS - try V1
Optional -
MIUI Music Player for CM10 from besttt
KERNELS & MODULES
There are three kernels for JellyBean currently
RECOMMENDED - LuPuS:
Kerne and Modules: http://forum.xda-developers.com/showthread.php?t=1885559
Fusion:
Kernel and Modules (both included in one download): http://forum.xda-developers.com/showthread.php?t=1926299
FXP kernel:
Included in the FXP145 zip file
HOW TO INSTALL
1) Flash one of the kernels above (I recommend LuPuS)
2) Boot into ClockWorkRecovery (hold down the menu button or volume down when the device lights up at the boot screen)
3) Wipe data, cache and dalvik if upgrading from another rom
4) Install the rom, then the fixes and tweaks in the order they are in down the page
5) Enjoy your new and improved CM10 rom!
Many thanks to all these amazing people and their great contributions to the Arc community! and thanks to FXP for the great rom in the first place!
P.S IF THERE'S ANYTHING I'VE MISSED OR THAT YOU THINK SHOULD BE ADDED TO THIS LIST, PLEASE LET ME KNOW
JackJoeR said:
HOW TO INSTALL
1) Flash one of the kernels above (I recommend LuPuS)
2) Boot into ClockWorkRecovery (hold down the menu button or volume down when the device lights up at the boot screen)
3) Install the fixes and tweaks in the order they are in down the page
4) Enjoy your new and improved CM10 rom
Click to expand...
Click to collapse
One little thing you've forgotten....... the ROM itself
Sent from my Jellybeaned Arc S
Nooby Arc S User said:
One little thing you've forgotten....... the ROM itself
Sent from my Jellybeaned Arc S
Click to expand...
Click to collapse
Haha yeah I should probably add a link to the actual rom
Is wifi tethering fix really from besttt? I asked him many times before but he could not help. So I think credit must go somewhere else...
Sent from my LT15i using xda premium
I believe he took the mod from the "Old downloads" section and made it none version specific, so yes I believe so
Sent from my Xperia Arc S using xda premium
Add link for fxp 144 ...its available now
Sent from my Xperia Arc S using Tapatalk 2
Camera work around
Hi everyone, just a note that there is a Camera ICS downloadable from the Google app store that works just fine with previewing photos ect....
I am running CM10 mod on my Sony Arc without any problems, plus i just disabled the cameras that was in the ROM, another thing I noticed is I had to get a proper gallery manager from the app store but all in all CM10 mod is awesome and thanks for this page with the fix`s, helped me alot
hey guys,thanks a lot for your working!:good::good:
my phone has 0% battery problem,but the latest cm10 fxp144 's kernel has not added 0% battery fix
so i can't use it,i'll very appreciate if you making a kernel for the bodys who have the same problem like me:laugh::laugh:
Anyone up for trying the same on CM10?
http://forum.xda-developers.com/showpost.php?p=22641677&postcount=821
Closed thread per OP's Request. It is no longer being maintained
I recently installed GingerIceJelly custom ROM on my Galaxy Y Duos GT-S6102. It added a boot image (that is displayed even before the recovery menu when I boot in a recovery mode). I later reverted back to my stock ROM, but the boot image still remains. I had thought it was part of the GingerIceJelly ROM, but apparently not. If it is not part of the kernel, where is it?
Is there a way to remove it?
Thanks
Eldho Thomas
Boot.img isn't part of the kernel it's all of it lol boot.img is the kernel
flashing stock Rom via Odin should wipe it
PHONE SLOW CLICK ME?
_____________________________________
"No one lives in the slums because they want to. It's like this train. It can't run anywhere except where its rails take it."- Cloud[FFvii]"
Lol. boot.img is the kernel. The thing you want is the Bootanimaton right? Its in the system/media with the file name of bootanimaton.zip
eldhothomas said:
I recently installed GingerIceJelly custom ROM on my Galaxy Y Duos GT-S6102. It added a boot image (that is displayed even before the recovery menu when I boot in a recovery mode). I later reverted back to my stock ROM, but the boot image still remains. I had thought it was part of the GingerIceJelly ROM, but apparently not. If it is not part of the kernel, where is it?
Is there a way to remove it?
Thanks
Eldho Thomas
Click to expand...
Click to collapse
U talking about yellow pink screen that comes before boot?
Its because of kernel made for the rom..change your kernel and its done..
Sent from my GT-S6102 using xda app-developers app
Thanks guys !
So, when I restore my phone back to the stock Samsung ROM, doesn't it restore back to the old Kernel?
PS: I am talking about the purple-yellow-etc screen that says "GingerIceJelly with compact kernel etc..... Nitu Bhaskar etc." even before the Samsung boot animation.
Thanks
Eldho Thomas
eldhothomas said:
Thanks guys !
So, when I restore my phone back to the stock Samsung ROM, doesn't it restore back to the old Kernel?
PS: I am talking about the purple-yellow-etc screen that says "GingerIceJelly with compact kernel etc..... Nitu Bhaskar etc." even before the Samsung boot animation.
Thanks
Eldho Thomas
Click to expand...
Click to collapse
Yes..just flash another kernel or flash stock rom via odin..and you are done.simple
Sent from my GT-S6102 using xda app-developers app
Need To Change The Kernel
eldhothomas said:
I recently installed GingerIceJelly custom ROM on my Galaxy Y Duos GT-S6102. It added a boot image (that is displayed even before the recovery menu when I boot in a recovery mode). I later reverted back to my stock ROM, but the boot image still remains. I had thought it was part of the GingerIceJelly ROM, but apparently not. If it is not part of the kernel, where is it?
Is there a way to remove it?
Thanks
Eldho Thomas
Click to expand...
Click to collapse
Yes you can remove it for this you have to change the kernel of your phone i would recommend to use iduos 1.2.1 as it is very stable with no bugs
Hope this Helps you.
---------- Post added at 09:33 AM ---------- Previous post was at 09:19 AM ----------
Please Give Solution For The Following Problems :-
1. Bluetooth, Wi-Fi, Data, Wi-Fi Hotspot Not Working Together.
2. Lockscreen Menu Is Of No use There Is No Change In The Lockscreen.
3. Scrolling Is Not Working properly In The Whole UI Need To Swype In The Opposite direction to stop the Scrolling.
4. GIJ Tweak Style Shop BootAnimations, Tweaks AD-HOC.zip Is Not Flashing Says
Error Flashing
(status:0)
5. OTA Updater Not Workig Says "Invalid Rom"
Due To These Problem I Can't say that it is a stable Custom Rom
I Dont't know that these problems are general or are Only happening to My Phone But Please Tell Me The Solutions.
Tech Knowns said:
Yes you can remove it for this you have to change the kernel of your phone i would recommend to use iduos 1.2.1 as it is very stable with no bugs
Hope this Helps you.
---------- Post added at 09:33 AM ---------- Previous post was at 09:19 AM ----------
Please Give Solution For The Following Problems :-
1. Bluetooth, Wi-Fi, Data, Wi-Fi Hotspot Not Working Together.
2. Lockscreen Menu Is Of No use There Is No Change In The Lockscreen.
3. Scrolling Is Not Working properly In The Whole UI Need To Swype In The Opposite direction to stop the Scrolling.
4. GIJ Tweak Style Shop BootAnimations, Tweaks AD-HOC.zip Is Not Flashing Says
Error Flashing
(status:0)
5. OTA Updater Not Workig Says "Invalid Rom"
Due To These Problem I Can't say that it is a stable Custom Rom
I Dont't know that these problems are general or are Only happening to My Phone But Please Tell Me The Solutions.
Click to expand...
Click to collapse
post the same in original thread..
U will get better ans.plus,it would be helpful for other users too
Sent from my GT-S6102 using xda app-developers app
Tech Knowns said:
Yes you can remove it for this you have to change the kernel of your phone i would recommend to use iduos 1.2.1 as it is very stable with no bugs
Hope this Helps you.
---------- Post added at 09:33 AM ---------- Previous post was at 09:19 AM ----------
Please Give Solution For The Following Problems :-
1. Bluetooth, Wi-Fi, Data, Wi-Fi Hotspot Not Working Together.
2. Lockscreen Menu Is Of No use There Is No Change In The Lockscreen.
3. Scrolling Is Not Working properly In The Whole UI Need To Swype In The Opposite direction to stop the Scrolling.
4. GIJ Tweak Style Shop BootAnimations, Tweaks AD-HOC.zip Is Not Flashing Says
Error Flashing
(status:0)
5. OTA Updater Not Workig Says "Invalid Rom"
Due To These Problem I Can't say that it is a stable Custom Rom
I Dont't know that these problems are general or are Only happening to My Phone But Please Tell Me The Solutions.
Click to expand...
Click to collapse
1. I have not seen wifi and data network working together as soon as there is wifi data network is automatically switched off...
2 don't know sorry u can ask the developer
3.i guess it's got something to do with the scrolling hack u can again contact the developer for this..
4. is is usually caused by an incompatible update-binary in edify ZIPs. Replacing it with a compatible one, then re-signing the ZIP, will usually fix this error. Our another way ask the Dev or is not for your phone..
5.probably because you have modified the build. Prop file in system /
:thumbup:
Sent from my GT-S5360 using xda app-developers app
Precision...
Hey,
Can you be bit more precise..We have not tried that GingerIceJelly rom so you should be able to tell the problem clearly maybe uploading an Image will be appreciable.Ok here is what i know that i thought of sharing with you.
When the phone's power is turned on the bios boots the phone to bootloader which Runs the kernel from it.And while the kernel modules are inserted,the phone now loads the rom.
So you now know where the problem is.
yes Download the bootloader and flash it.
Get your odin flashable stock and flash BCMboot.img or some file which only contains bootloader.
If you want to try changing your bootanimation click here
Thanks,
optimus
Tech Knowns said:
Yes you can remove it for this you have to change the kernel of your phone i would recommend to use iduos 1.2.1 as it is very stable with no bugs
Hope this Helps you.
---------- Post added at 09:33 AM ---------- Previous post was at 09:19 AM ----------
Please Give Solution For The Following Problems :-
1. Bluetooth, Wi-Fi, Data, Wi-Fi Hotspot Not Working Together.
2. Lockscreen Menu Is Of No use There Is No Change In The Lockscreen.
3. Scrolling Is Not Working properly In The Whole UI Need To Swype In The Opposite direction to stop the Scrolling.
4. GIJ Tweak Style Shop BootAnimations, Tweaks AD-HOC.zip Is Not Flashing Says
Error Flashing
(status:0)
5. OTA Updater Not Workig Says "Invalid Rom"
Due To These Problem I Can't say that it is a stable Custom Rom
I Dont't know that these problems are general or are Only happening to My Phone But Please Tell Me The Solutions.
Click to expand...
Click to collapse
1. all radio problem will be fixed in ota update about 2 or 3 days again...
2. this uncomplete project
3. this in no bug!!! but NEW SMOOTH SCROLING METHOD by official firmware DXLK2... actually in DXMA1 scroling method back to old.. but i like this scroling mthod. so, i keep this....
4. will be fixed to.... TweakStyleShop update will be deferent file with ROM OTA-UPDATE... you will need update booth of them..
5. its normally... IT FOR squential update features....
because no ID updatefile that matched...dont worry if any update you will received that, so, it not error or bug.,
Editing plat text
You need to decompile framework.har inside that in a folder is a file named platlogo go inside that there is that line edit it compile the jar you are done
It's been requested that I create a new thread for this so as not to clog up @milaq's thread.
As some of you may have seen in flintman's Evervolv and milaq's CM threads, there has been a lot of work on the 3.4 kernel for tenderloin. Its a pretty awesome feat to have this running on our good ol tenderloin. =)
The gratitude for this kernel and build needs to be given to almost anyone but me. (Flemmard, flintman, jcsullins, Dorregaray and everyone that came before me on this device (dalingrin, green, and other's I'm sure that I'm missing)). I've had my tenderloin for quite awhile but never really done much with it until recently.
Anyway, without further ado, I present to you nightlies of CM-11.0 for tenderloin with a 3.4 kernel and -caf based HALs. Basically what this means is we'll be running the latest code from codeaurora on our msm8660 tenderloin.
THERE WILL BE BUGS! This thing is not perfect. It is still in active development.
CURRENT BUGZ (in no particular order):
- Bluetooth steals battery, but DOES work (jcsullins) - also sixaxis app doesn't work =(
- Camera is a bit derpy still, major wip, it takes pictures though (Dorregaray)
- Other stuff? Probably, yea
Destructions: PLEASE READ
1. This is a /data/media rom (relevant). What that means is you should be partitioned with a very small 'media' partition and a very large 'data' partition. The benefit of this is that your /sdcard and /data partitions share the big chunk of your usable space, just like any newer phone does these days. Use TPToolbox to achieve the new partition scheme: http://forum.xda-developers.com/showthread.php?t=2756314
2. You'll need a recovery that has both /data/media support and selinux support. Any of the following will work. Flashable via recovery.
-PhilZ Clockworkmod 6.0.4.7 (non-touch)(will backup and restore in both cwm and twrp format)
-Milaq's ClockworkMod 6.0.5.4
-Flintman's TWRP
3. Now you're ready to flash the rom. Downloads here: http://www.invisiblek.org/roms/cm-11.0/tenderloin/
4. Gapps here: http://wiki.cyanogenmod.org/w/Google_Apps
I'd recommend wiping data when coming to this rom or going to a different one (going between milaq's and this should be fine).
These are automatically built on my personal server at home and then uploaded. There may or may not be issues during the build times so don't always expect a fresh build every day. You can follow the automated twitter account here which will spit out a tweet once the build is finished uploading.
Sources:
-Kernel
-Device Tree
-CM Sources (the rest of what's needed)
There are a couple more changes and a couple other repos that are required to build this. Add this stuff to your .repo/local_manifests/roomservice.xml in order to build this yourself (after syncing the cm source of course)
http://pastebin.com/jKAMWM8T
You'll also need to cherry pick this commit from jcsullins: http://review.cyanogenmod.org/#/c/54380
Feel free to fork and fix!
Again -
Thanks to everyone that has contributed to making this rom.
Flemmard, flintman, jcsullins, dalingrin, green, milaq, the entire CM team and I'm sure many others.
Good new year present.
Looking forward to when Bluetooth is working. That and the black boxes were the only thing keeping me off KitKat.
Sent from my TouchPad using XDA Premium 4 mobile app
invisiblek, I used your 20131226 ROM. It kept crashing and rebooting every time I played a video. Netflix would crash immediately on loading and reboot the tablet. Has this been fixed with your 20131231 build?
Sent from my Touchpad using Tapatalk
---------- Post added at 08:53 PM ---------- Previous post was at 08:39 PM ----------
I almost forgot… I also had major issues with apps not installing or disappearing after a reboot.
Sent from my Touchpad using Tapatalk
i am trying to move uImage.ClockworkMod after rename the file its asking file already exit ,should we need to replace ?
i tried to keep both but it never successful...
is there any way to intall from zip file like upgrading recovery
k4ever said:
invisiblek, I used your 20131226 ROM. It kept crashing and rebooting every time I played a video. Netflix would crash immediately on loading and reboot the tablet. Has this been fixed with your 20131231 build?
Sent from my Touchpad using Tapatalk
---------- Post added at 08:53 PM ---------- Previous post was at 08:39 PM ----------
I almost forgot… I also had major issues with apps not installing or disappearing after a reboot.
Sent from my Touchpad using Tapatalk
Click to expand...
Click to collapse
I believe Flint said video playback was still a bit broke around that date. I remember loading that build and Diceplayer would crash upon playing a video, but it would only crash back to the home screen (not entirely crash and reboot). I think Flint said he fixed it earlier, so try 20140101 when it comes out.
vinukondamahesh said:
i am trying to move uImage.ClockworkMod after rename the file its asking file already exit ,should we need to replace ?
i tried to keep both but it never successful...
is there any way to intall from zip file like upgrading recovery
Click to expand...
Click to collapse
Replace it so you can use the new CWM to flash this build. I believe /boot is limited to 30mb so trying to keep both may not work.
allstar319, what about the disappearing apps? Has that been fixed?
Sent from my Touchpad using Tapatalk
k4ever said:
allstar319, what about the disappearing apps? Has that been fixed?
Sent from my Touchpad using Tapatalk
Click to expand...
Click to collapse
No clue. I heard of apps disappearing from the Google Home Launcher, but not getting completely removed or preventing apps from being installed. Is that the launcher you're using? Only remedy I heard from that (Milaq's CM11 thread, somewhere around page 40) was to just readd them from the app drawer.
Best advice is to wait for todays build to get uploaded and see what happens.
2. You'll need a recovery that has both /data/media support and selinux support. This clockworkmod will do the trick: http://invisiblek.org/tenderloin/openrecovery-twrp-2.6.3.0-tenderloin-selinux.img (thanks @milaq)
Push it to /boot/uImage.ClockworkMod
Great ROM far, I loaded the recovery but i named it TWRP instead because it says TWRP in the file name. It ran as TWRP . Is the above just a typo or can I call it either one?
Sent from my Touchpad using XDA Premium HD
allstar319 said:
I believe Flint said video playback was still a bit broke around that date. I remember loading that build and Diceplayer would crash upon playing a video, but it would only crash back to the home screen (not entirely crash and reboot). I think Flint said he fixed it earlier, so try 20140101 when it comes out.
Replace it so you can use the new CWM to flash this build. I believe /boot is limited to 30mb so trying to keep both may not work.
Click to expand...
Click to collapse
thank you its working nw
milaq actually has a flashable zip in his thread. that is the easiest. i was on 4.3 went into that recovery, made a backup then flashed the new cwm, rebooted recovery did a full wipe and flashed the rom and gapps and i am up and running. who would have ever thought we would have kitkat on a touchpad. not to mention a 3.x kernel. unreal, thanks for everyones work. Happy New Year
jerryatherton said:
2. You'll need a recovery that has both /data/media support and selinux support. This clockworkmod will do the trick: http://invisiblek.org/tenderloin/openrecovery-twrp-2.6.3.0-tenderloin-selinux.img (thanks @milaq)
Push it to /boot/uImage.ClockworkMod
Great ROM far, I loaded the recovery but i named it TWRP instead because it says TWRP in the file name. It ran as TWRP . Is the above just a typo or can I call it either one?
Sent from my Touchpad using XDA Premium HD
Click to expand...
Click to collapse
Oops, I had the wrong image there. Link updated with the cwm =P
EDIT: Also added a flashable zip for it, had trouble downloading milaq's so I made my own =/
Anyone else getting a Core Process failure message when booting to the 01012014 Build?
I went back to the 12312013 build and all appears to be back to normal.
To be clear, I went straight to this build from a fresh CM9 image without booting into Android - ever. Got a second-hand device back from a relative, and pushed it to CM11, so it may have been a result of my own process.
I'll reflash 01012014 and see if the error persists.
--McBean
Really looking forwards to a stable version of this to try. Thanks for the effort.
BillzillaAus said:
Really looking forwards to a stable version of this to try. Thanks for the effort.
Click to expand...
Click to collapse
So am I. Right now I'm using invisiblek's CM 10.2 ROM. It's stable (although a little slow). I don't want to jump to CM 11 again until it is a lot more stable.
BTW, can someone point me to a thread that discusses that benefits of the 3.4 kernel on the Touchpad?
Sent from my Touchpad using Tapatalk
k4ever said:
So am I. Right now I'm using invisiblek's CM 10.2 ROM. It's stable (although a little slow). I don't want to jump to CM 11 again until it is a lot more stable.
BTW, can someone point me to a thread that discusses that benefits of the 3.4 kernel on the Touchpad?
Sent from my Touchpad using Tapatalk
Click to expand...
Click to collapse
IIRC, a long time ago, someone mentioned that there were some benefits of Jelly Bean that we couldn't use because of the version of our kernel we were using. I would assume the same still applies today if that was the case. Also, with CM11, black boxes are present in many apps that prove them to be unusable. The default browser is unusable on CM11 with the old kernel, so you'd have to either use Chrome, or wait for a new kernel. I'm sure there are some performance enhancements as well.
On todays build, video playback still seems to crash to the home screen with Diceplayer (I could of swore Flint said he fixed that in his build at least). I haven't tested Milaq's test build of the 3.0 kernel to see if that's the same case over there.
allstar319 said:
IIRC, a long time ago, someone mentioned that there were some benefits of Jelly Bean that we couldn't use because of the version of our kernel we were using. I would assume the same still applies today if that was the case. Also, with CM11, black boxes are present in many apps that prove them to be unusable. The default browser is unusable on CM11 with the old kernel, so you'd have to either use Chrome, or wait for a new kernel. I'm sure there are some performance enhancements as well.
On todays build, video playback still seems to crash to the home screen with Diceplayer (I could of swore Flint said he fixed that in his build at least). I haven't tested Milaq's test build of the 3.0 kernel to see if that's the same case over there.
Click to expand...
Click to collapse
Thanks for the quick reply. Bummer!
Sent from my Touchpad using Tapatalk
---------- Post added at 04:59 PM ---------- Previous post was at 04:48 PM ----------
One more question for invisiblek, will you be making any updates/improvements to CM10.2 or has all development shifted to CM11? The last 10.2 ROM was on 20131209. I'm having issues with the camera not working..
Sent from my Touchpad using Tapatalk
k4ever said:
Thanks for the quick reply. Bummer!
Sent from my Touchpad using Tapatalk
---------- Post added at 04:59 PM ---------- Previous post was at 04:48 PM ----------
One more question for invisiblek, will you be making any updates/improvements to CM10.2 or has all development shifted to CM11? The last 10.2 ROM was on 20131209. I'm having issues with the camera not working..
Click to expand...
Click to collapse
Also, the old kernel was preventing us from having "official" CM builds.
Getting SoD's once I turn the screen off. Tried the old way to fix that by raising the min clock, but that didn't seem to help. Any ideas?
k4ever said:
Thanks for the quick reply. Bummer!
Sent from my Touchpad using Tapatalk
---------- Post added at 04:59 PM ---------- Previous post was at 04:48 PM ----------
One more question for invisiblek, will you be making any updates/improvements to CM10.2 or has all development shifted to CM11? The last 10.2 ROM was on 20131209. I'm having issues with the camera not working..
Sent from my Touchpad using Tapatalk
Click to expand...
Click to collapse
The 3.4 kernel, minimally, resolves an issues with the other CM11 builds where the core/stock apps were experiencing "black boxes" which prevented users from reading mail, using the browser to navigate and some other issues. Right off the bat, the new kernel resolves that issue.
--McBean