hello
my kindle fire is still bricked
i'm uner 6.2.1
with windows 7
problem of permission folders
impossible to boot, to use fastboot or to use KF utility..the logo was flashing and that's all.
impossible to have fastboot or acees to the system, a real brick
so i tried to make a factory cable.
and i think it was a success
now 2 things : the logo doens't flash any more, it is fix
but impossible to recognise the kindle
my computer considers it as an unknown device, impossible to reinstall the driver
i'm always bricked !!
i don't understand and i don't know what to do....
do you have an idear or some help ??
thanks
excuse me for my poor english, i'm french, 15 years of english for that result...
jluc
don't know if it helps, but read the last couple of posts in this thread:
http://forum.xda-developers.com/showthread.php?t=1412085
ther's also a link how to recover with factory cable (install twrp) and look at a correct driver installation (use last KFU install_drivers.bat)
good luck !
hello
thanks for your help
i have exactly the same problem than in your link !
the cable seems to be good and nothing happens !
hope someone could help me
thanks for your help
Related
Hello, i have the following problem, just after have rooted my 6.2.1 Kindle Fire and tryed to install TWRP, when i rebooted my device it remains stuck at the KINDLE FIRE logo.
Adb doesn't recognize the device anymore and keep telling me there are no devices connected.
I tryed on Macbook and Windows too.
Can anyone help me?
any one help me??? i try kindle fire utility, kindle fire unbrick but nothing happens
please help me......
tobyax said:
Hello, i have the following problem, just after have rooted my 6.2.1 Kindle Fire and tryed to install TWRP, when i rebooted my device it remains stuck at the KINDLE FIRE logo.
Adb doesn't recognize the device anymore and keep telling me there are no devices connected.
I tryed on Macbook and Windows too.
Can anyone help me?
Click to expand...
Click to collapse
Sure can bud... Here is a link to my guide that you should follow.... If you did you would not have this problem. There are two ways that you can fix it manually and automatically. The automatic way was just updated onto my guide today but is for windows only. The manual way is right under that update for individuals that want to do it to understand things better or on a different os on their pc... Good luck and if you have anymore problems, you can feel free to pm me and I can either walk you through it on irc or teamviewer....
DONT FORGET TO HIT THE THANKS BUTTON IF I HELPED YOU PLEASE!!!!
here is a link to my guide:
http://forum.xda-developers.com/showthread.php?t=1417234
I'll try to install an other version of windows on vmware to try to fix the kinlde fire. Thanks for now
now the kindle fire with usb attached lights and turns off all the time, without usb does not turn on..
sorry for my bad english
tobyax said:
I'll try to install an other version of windows on vmware to try to fix the kinlde fire. Thanks for now
now the kindle fire with usb attached lights and turns off all the time, without usb does not turn on..
sorry for my bad english
Click to expand...
Click to collapse
Which version of kindle fire utility did you use? You have to be sure that it is ver.0.9.1 because the version before that there was a problem with the twrp file in older versions of the kindle fire utility.
Also are you sure that your battery was charged before you started to do this?
Like I said if you continue to have problems I can get on teamviewer with you and show you how to reinstall the drivers manually so that you can access your adb shell to change fastboot. Just pm me if you have anymore problems and need someone to do it for you..
i used the last version of kindle fire utility 0.9.1 and the battery was charging, I believe that now is completely discharged
I'm installing latest version of Windows XP on vmware, if you want to help me after I would be grateful...
sorry again for my bad english
tobyax said:
i used the last version of kindle fire utility 0.9.1 and the battery was charging, I believe that now is completely discharged
I'm installing latest version of Windows XP on vmware, if you want to help me after I would be grateful...
sorry again for my bad english
Click to expand...
Click to collapse
I sure will make sure that you get teamviewer if you do not already have it. When you are using windows xp make sure your .android folder is in the proper place
C:\Documents and Settings\YourUserName\
Just making sure that your .android folder is in the correct place. It should be though if you installed root and android market already though.
nothing, now the kindle fire don't start enymore i think the battery is over.....
tobyax said:
Hello, i have the following problem, just after have rooted my 6.2.1 Kindle Fire and tryed to install TWRP, when i rebooted my device it remains stuck at the KINDLE FIRE logo.
Adb doesn't recognize the device anymore and keep telling me there are no devices connected.
I tryed on Macbook and Windows too.
Can anyone help me?
Click to expand...
Click to collapse
I have same problem and I was tried all knowed "guides and How to" for unbricking my Kindle Fire... . But solution is so easy!
Let's try http://forum.xda-developers.com/showthread.php?t=1428428 ... choose option 1-Stuck at boot logo... and after that when the app ask you "Does you have FIREFIREFIRE" reply no... .
I must use this app twice because at first try app doesn't do anything... . But now my Kindle finaly works!
tobias,
io ho il tuo stesso problema: hai risolto??? Se si mi dici cosa hai fatto?
hello
i was tried this http://rootkindlefire.com/kindle-fire-root/kindle-fire-root-new6-2-1windowsmaclinux/ to install TWRP recovery but after Step 14 now i'am stock in KF logo and my pc doesn't show me if there kindle fire unknown drivers or somethink like that
now i want make my KF like new KF..how ??
i already see this http://forum.xda-developers.com/showthread.php?t=1356257 but i'doesn't understanding any thing from the GUIDE
EDIT: i'am in 6.2.1 with root
sorry for my bad english
The instructions say that the Kindle will hang on the KF logo, so I am inclined to believe that if you did everything correctly up to that point, you are still on track.
Reinstall the drivers (you may wish to use the http://forum.xda-developers.com/showthread.php?t=1399889
as this includes a batch file to reinstall the drivers for you, and then continue.
-juanito- said:
hello
i was tried this http://rootkindlefire.com/kindle-fire-root/kindle-fire-root-new6-2-1windowsmaclinux/ to install TWRP recovery but after Step 14 now i'am stock in KF logo and my pc doesn't show me if there kindle fire unknown drivers or somethink like that
now i want make my KF like new KF..how ??
i already see this http://forum.xda-developers.com/showthread.php?t=1356257 but i'doesn't understanding any thing from the GUIDE
EDIT: i'am in 6.2.1 with root
sorry for my bad english
Click to expand...
Click to collapse
Use this: http://forum.xda-developers.com/showthread.php?t=1428428
hi
Sorry for my English
I wanted to root my phone but made a mistake somewhere.
now the phone is always off. when connected to the computer, program RSD see him as QHSUSB_DLOAD; computer see him as Qualcomm HS-USB QDLoader 9008
RSD don`t flasing(The phone failed to switch to fastboot mode)(FAIL) flasing cabl dont helped.
How reestablished bootloader
nobody knows how to help me?
It appears that you have a corrupt boot loader and unfortunately we do not have any of the files available to us that would be needed to fix your phone.
They would be the proprietary binaries and low level boot images from Qualcomm for flashing to a new board at the factory.
We have such repair kits for some earlier OMAP based devices but I have not heard of or seen any such files for the Qualcomm S4 devices, sorry.
If you wish to make a clean install without bothering about backup and so and so then I can guide you through that.
kaskoraja said:
If you wish to make a clean install without bothering about backup and so and so then I can guide you through that.
Click to expand...
Click to collapse
how?
same problem
i have the same problem and the same brick. Can anyone help us?:crying:
+ to brick reason
Ral126 said:
i have the same problem and the same brick. Can anyone help us?:crying:
Click to expand...
Click to collapse
You forget, thats you also try to flash MIUI!
St.Noigel said:
You forget, thats you also try to flash MIUI!
Click to expand...
Click to collapse
Yes) I tried))) But for the beginning i need to reestablished bootloader.
ASUS PadFone 2 QHSUSB_DLOAD error
I've an ASUS Padfone 2 with the same error. Looks like it's kind of easy to get these Qualcomm devices into this f*cking issue
My case is detailed here: http://forum.xda-developers.com/showthread.php?t=2220775
kaskoraja said:
If you wish to make a clean install without bothering about backup and so and so then I can guide you through that.
Click to expand...
Click to collapse
Good evening,
I bricked the Innos D9 because I installed 2 new roms .........
I first stalled the DNS and it was a very nice rom but I was not 100% happy ...........than I installed the Cloudfone rom and this was very bad..........than I wanted to go back to the DNS rom and I got the same problem as yours.
I searched for a solution and I found a video on YouTube ..." Restore Acronis Backup on CloudFone Thrill 430X (Innos D9) " and after this experiment my Innos D9 is totally dead.....it isn't recognized by the computer ....not even by clicking or holding any button ..........when I connect the USB to my laptop I can only hear the sound that something has been connected to the laptop ........but nothing is visible.
any help to unbrick my phone?
One thing you could try is sending a message over to Josh at mobiletechvideos.com and see if he can help. It looks like they offer JTAG repairs for hard bricks(link).
Note: I don't work for mobiletechvideos or anything. I just had my Samsung Focus power button repaired by them a couple weeks ago and they did a pretty nice job.
I've got same problem with Asus Padfone A66.
I installed the qualcomm drivers, and QPST program is see my phone, but i have no idea howto use this program, or howto convert image files to (proper) .hex format, or howto build needed files. My cpu is MSM8260 and QPST see my phone as Q/QCP-XX (Download). And maybe I need for a proper MPRG8260.hex and aml, mbm files for flashing. so QPST sjust throwing error, ahnd happen nothing.
http://forum.xda-developers.com/showpost.php?p=45548210&postcount=3
Hello everyone, I'm having the same problem .
Someone found a solution to this problem?
I have a RAZR HD .
Thank's
Hey, really i need Yours help, I have a big problem with l7.
Phone is switched on only in emergency, or if i just turn the phone hangs on the LG logo.
I tried to fire up fastboot but jumps secure booting error.
CM10 previously installed according to the instructions in some forum, but did not work the mobile phone network, so I wanted to reinstall the factory soft by KDZ.
Unfortunately, the first attempt was unsuccessful, and now when trying to install any version of the system (V10K, V10a), the phone is detected at the begining, and installs soft, but after this, phone is restarting and freezes on LG logo, and the computer tries to install the driver for "MTP USB Devices" Unfortunately, the driver is not installed and the installation is not coming to an end.
I tried to install the phone in a mode other than CDMA and EMERGENCY, but there is an error in the system "model II msg not found" and the installation ends with the same result.
Mention that several times before installing the factory soft and there were no problems. Perhaps it is a matter of something that I installed on the phone with the CM10 (unlocking bootloader?)
After the installation process in KDZ upgrade error message pops up wparam: 100 lparam: 6
I will be very grateful for any help.
I'm sorry for my english if something is dificult to understand. Then i'll explane everything You need.
solved problem
When the L7 stuck on the LG logo, restart the process, run the file Flash_Bootloader.bat then Flash_Recovery.bat, then Reboot2Recovery.bat. When you get into Recovery Mode, do the restore files that you have done this before, or reinstall CM10 ..... that's all you need to do and your L7 will work again. I hope I helped .... Regards:fingers-crossed::fingers-crossed::fingers-crossed:
I think its communication problem when you flashing through KDZ. Try changing modem port of the phone wich is free and reflash it!
R: [Q] I brick my L7 Help needed
I had this problem too, just flash homero' s V10K and when it finishes DONT disconnect The phone from The PC,when phone is booting fire up terminal on your PC and write adb reboot recovery, Then when you are in CWM wipe data,cache, dalvik and reboot!
Sent from my LG-P700 using xda app-developers app
Hi all,
i have the same Problem, i install the V10K.kdz file
but the L7 freeze at the boot logo... i have no Idea...
i Flash also with this file---> homero' s V10K - the same effect freeze on the Boot logo
hope u can help me
:good: :good: :good:
DuckDagobert007 said:
Hi all,
i have the same Problem, i install the V10K.kdz file
but the L7 freeze at the boot logo... i have no Idea...
i Flash also with this file---> homero' s V10K - the same effect freeze on the Boot logo
hope u can help me
:good: :good: :good:
Click to expand...
Click to collapse
Just follow what I described in the post before yours,and your phone will boot
Hi,
thanks for your Comment :good::good:
I try it 100, but it doesnt work
i dont know, my the Problem is, can u make ah tutorial with Pic ??
or when u are German, can u send me ah PN ??
Greets
Yeah,I'll make a tutorial
Just posted the Thread in Android Development !
Hello!
Good afternoon masters!
My LG G2 was hard bricked after i [very intelligent man (sarcasm)] flashed a ROM and Efficient Kernel without wipe nothing!
My phone can't enter in recovery mode, download or fastboot.. the PC recognize him in PdaNet installed, but in ADB i can't execute any command
because the status of device is "unauthorized" and i don't have access to the screen to confirm the authorization.
Obs:
Red LED light ON while pluged in PC.
Try to ON the device shows blank stripes in LG logo boot and shades of gray.. after this the screens off.
Thanks for all and sorry for my english!
[EDIT]:
Aaaw Yeah! I won, masters!
The problem has solved now!
1: I followed this tutorial
Then: I followed the tutorial that the master dredd2099 passed me. Thank you too man!
Obs: if you don't have Linux to follow the tutorial passed by dredd2009.. try this tutorial on youtube.
Obs 2: if your PC recognize the device like qhsusb_bulk 9008 (don't recognize disk parts in PC.. only COM port in Device Manager) instead of 9006.. try this tutorial
Thanks for all! [very happy]
have you checked here, might help, sounds similar at least
dredd2099 said:
have you checked here, might help, sounds similar at least
Click to expand...
Click to collapse
Thanks for answer my friend!
In the post of your reply.. the PC detects device as qhsusb_bulk with multiple drivers, in my case unfortunately not.
In my case, the PC only detects device in ADB as unauthorized.
Thanks a lot .