Finally took the unlock/root/rom plunge and have been enjoying ICS (nightly 14) for a few days now. With nightly 16 it seemed to make sense to update. When i put the .zip on the SD card and tried to use CWMOD to install it gave an error "(Bad)" on the operation after opening the ZIP.
i downloaded again, tried again, no change, then started messing around to get it to work (should have known better). Now, if I boot in CWMOD and select install zip from SD / choose ZIP i see all the folders on my internal memory: all the folders for alarms. music, pictures, etc. I can put the release .zip in there and it will see it, but still fails on the install.
If I look with root explorer (or other tools) when i look in mnt/sdcard it has all the folders for alarms. music, pictures, etc. I can also see /mnt/external1 which is the SD card and does have the files on it.
once booted, from PC I see "Internal Storage" and "SD Card" which look as i would expect and contain the correct files (ie: "SD Card" contains the ROM files)
I've tried another SD card, with no change.
So, somehow i think i have a pointer messed up so SD points to internal memory.
I've tried all the wipes i can find, but can't get past it. Any suggestions on how to reset, or wipe it more fully, would be appreciated.
bdsemple said:
Finally took the unlock/root/rom plunge and have been enjoying ICS (nightly 14) for a few days now. With nightly 16 it seemed to make sense to update. When i put the .zip on the SD card and tried to use CWMOD to install it gave an error "(Bad)" on the operation after opening the ZIP.
i downloaded again, tried again, no change, then started messing around to get it to work (should have known better). Now, if I boot in CWMOD and select install zip from SD / choose ZIP i see all the folders on my internal memory: all the folders for alarms. music, pictures, etc. I can put the release .zip in there and it will see it, but still fails on the install.
If I look with root explorer (or other tools) when i look in mnt/sdcard it has all the folders for alarms. music, pictures, etc. I can also see /mnt/external1 which is the SD card and does have the files on it.
once booted, from PC I see "Internal Storage" and "SD Card" which look as i would expect and contain the correct files (ie: "SD Card" contains the ROM files)
I've tried another SD card, with no change.
So, somehow i think i have a pointer messed up so SD points to internal memory.
I've tried all the wipes i can find, but can't get past it. Any suggestions on how to reset, or wipe it more fully, would be appreciated.
Click to expand...
Click to collapse
You see everything in your internal storage (32gb) also called sdcard, because I think you allowed Rom Manager to update your recovery to whatever is newest (4.0.0.4 ?) but that version doesn't play nice with the Xoom's external micro sdcard. This is a known issue, and I and others have written about this a million times, but anyway, you need to reflash the solarnz R4c recovery v 3.2. 0.0 image file through fastboot with your micro sdcard mounted in your Xoom. Then, after that, you can flash from the micro sdcard to your heart's content. The micro sdcard is located at mnt/external1. I don't even use Rom Manager for anything. If you just press the power button as if to actually power down, I think you'll get the boot menu to boot into recovery very easily, if you don't feel comfortable doing it manually. Or you can download Quick Boot.
okantomi said:
You see everything in your internal storage (32gb) also called sdcard, because I think you allowed Rom Manager to update your recovery to whatever is newest (4.0.0.4 ?) but that version doesn't play nice with the Xoom's external micro sdcard. This is a known issue, and I and others have written about this a million times, but anyway, you need to reflash the solarnz R4c recovery v 3.2. 0.0 image file through fastboot with your micro sdcard mounted in your Xoom. Then, after that, you can flash from the micro sdcard to your heart's content. The micro sdcard is located at mnt/external1. I don't even use Rom Manager for anything. If you just press the power button as if to actually power down, I think you'll get the boot menu to boot into recovery very easily, if you don't feel comfortable doing it manually. Or you can download Quick Boot.
Click to expand...
Click to collapse
I recall having a similar issue with loading zip files onto the SD card and then trying to flash it just to get an error.
The only was I had a work around for that was to only load the zip file THROUGH CWM. By selecting Mounts and storage > Mount USB, then it takes up to 1 minute for my computer to see the sdcard (removable disk). Then I just transfer the zip to the SD card by this method and then when its done, I return to the main menu and go about the process of flashing.
The rogue recovery works just as well and has a few more options than the tiamat recovery. It also supports internal and external sdcards as well as toggling the backup and/or wipe of /data/media. Just my opinion and preference.
Sent from my Xoom using xda premium
Related
So I just traded my iPhone for a rooted MyTouch. It has the Cyanogen mod I believe. Well all of a sudden I could not access my SD card and when I tried to open it on my computer it said 'Wrong Format'. Wouldn't work on the phone either. So I formated Fat32 and thought I could start over.
It still shows my apps installed in the Marketplace, although they were on the SD and deleted. I can't uninstall them, but it thinks they are there, somewhere. Has anyone had this problem? I am relatively new to Android and rooting. I had a jailbroken iPhone before. Thanks!
kinda depends really. I would suggest first going thru recovery console if you are using amon recovery and partition sd card there. With most modified roms you have apps 2 sd so there are actually 3 partions. The biggest is fat32 for data like music, then ext2,3,4 for applications then a linux swap partition to help expand the ram on the phone and if you formated on PC or from settings on phone those partitions are gone. So I would do that first and then try to uninstall from market and reinstall again if not you may need to wipe and restart the device.
How do I get into recovery mode? I tried going to the terminal and using the flash_image recovery /sdcard/imgfile but it says I do not have permission?
Any ideas??
If your phone has been rooted right by the previous owner, you can access the recovery mode by first powering down, then pressing home and power at the same time.
Ahh! That worked! thanks!
I have a variation on this problem and lost my apps and Market, hope someone can help. Started with the SD card coming unmounted randomly, known issue with EVO I guess. Followed the recommendation of reformatting the SD by plugging it into a Windows PC and doing a FAT32 format. I backed up everything I could "see" from SD to C: drive. I am running a custom ROM with APPS2SD feature and Clockworkmod recovery. I'm very new to Linix and Android but, it looks like there is a Linix Ext3 partition that is made by APPS2SD on the SD card and that is where all my apps where, including android Market app. So, upon copying all the folders back to the re-formatted SD I had no apps and no android Market to able to re-download all my apps. I guess Market is like a licensed deal that you can't just get a .apk of and reload it. I do HAVE a current recovery backup that was on the FAT32 directory of the SD card but it appears the the Ext3 partition is not in that recovery file. I tried booting into recovery with Clockworkmod and reformatting the SD again, I tried a "Restore ext3.img" but Clockworkmod comes back with 'sd-ext.img not found" so I am guessing that the Linix Ext3 partition backup was stored IN the Ext3 partition of the SD(?) and the system and data stuff is stored in the FAT32 recovery file. Brilliant idea (not)! I tried a re-flash of the ROM, flashes OK but no apps. Anyway, the SD is properly partitioned now, the FAT32 stuff is back on, I don't know how to look in to the Est3 partition but, I know there is one program there cause I installed a file explorer by downloading and executing an .apk and there was an option to install it to SD. Going to factory reset and starting over again is not an option. Any ideas please?
SOLVED this issue:
apperantly the android market application is called "vendor.apk" and can be downloaded from various sites BUT WAIT, it's not that simple. Apperantly the vendor app has to be specific to your phone (hardware)? On a whim, I downoaded the previous version of my custom ROM (happedned to be Fresh ROM) .zip, I extracted the vendor.apk from the .zip and installed that. Then, I had an apk called MarketUpdater.apk, or something like that, that had installed in the phones system/app from the last Fresh ROM update. I ran this to update the vendor (android market) to the latest version, then I ran that. Did it work? NO, it crashed hen I tied to run market. I then did a re-boot. Did it it work? NO Upon attempting to reboot it got stuck in a loop and froze. Very scary. So, remove the battery and try again. I think I had to remove and re-install the SDcard somewhere in there to get it to a first time boot and, after a re-boot, whalla, come back with a working market. Market remembered all the apps that I purchased and I re-downloaded everything. Of course, I don't know for sure where they are stored right now (SD card or phone??)
And, my original problem of SD card constantly coming unmounted has been fixed.
Stuck trying to make sure a2sd is working... I moved the zip to the SD, partitioned it, upgraded to ext3, and now I am trying to flash the damn zip and it keeps saying there's no zip files found. SOmeone help please? Really dont wanna have to boot up for nothing...
you need to put the zip back on your sd when you put it on there THEN partitioned it formated the card hence the zip got erased. either reboot and add it or boot into recovery and use the usb mass storge option.
Lol! You should've flashed the zip then partitioned. Partitioning wipes your SD card so of course there is no zip to flash!
jerry43812 said:
Stuck trying to make sure a2sd is working... I moved the zip to the SD, partitioned it, upgraded to ext3, and now I am trying to flash the damn zip and it keeps saying there's no zip files found. SOmeone help please? Really dont wanna have to boot up for nothing...
Click to expand...
Click to collapse
you put the zip on
...and then partitioned?
Yeah, apparently I followed some idiot directions... this is why I would rather ask people first than do a damn search. Here's the quote form the thread I followed:
1. (Optional) Download A2SD version 2.5: http://www.darktremor.com/files/misc...2.5-signed.zip. Save the file to your SD card. If you don't want to download this version, skip this step.
2. Reboot the phone into recovery mode.
3. Partition the SD card by selecting Partition SD Card -> Partition SD.
4. Once you have partitioned it, press the back button to go to the main recovery menu.
5. If you downloaded the A2SD version 2.5, flash the program by selecting Flash zip from scard -> a2sd-2.5-signed.zip. Otherwise, skip this step.
Click to expand...
Click to collapse
I thought that was fishy, so after I partitioned, I pushed the file back onto SD (which is really not empty after the ext2 to ext3 upgrade, or partition ffor that matter)
After I re-pushed the zip, I tried to flash it but still says no zip found. So, I go into adb... here's the results:
Code:
You stupid ****er... dont have 2 phones connected at the same time!
If your SD is not empty after partitioning, you did something wrong. That will wipe your SD card.
Download the file again. I used the same link and his directions and it worked fine.
crap... now adb wont even recognize the device as attached
ok point me somewhere so I can go back to complete stock and re-root and reinstall DC. I am aggravated and not playing around anymore.
jerry43812 said:
ok point me somewhere so I can go back to complete stock and re-root and reinstall DC. I am aggravated and not playing around anymore.
Click to expand...
Click to collapse
Try unplugging your pone, killing and restarting the server, and then reconnecting
-unplug
-adb kill_server
-adb start_server
-plug phone in, wait for it to do its thing
-adb devices
tejasrichard said:
Try unplugging your pone, killing and restarting the server, and then reconnecting
-unplug
-adb kill_server
-adb start_server
-plug phone in, wait for it to do its thing
-adb devices
Click to expand...
Click to collapse
tried that and didnt work, i just let the thing boot regular and logcat worked, so adb recognized it again after it began booting. Show me a ROM that's clean, everything works for the most part, and doesnt force me to wipe everything on each update and I'll be flashing it now, after I RUU.
Bielinsk said:
If your SD is not empty after partitioning, you did something wrong. That will wipe your SD card.
Download the file again. I used the same link and his directions and it worked fine.
Click to expand...
Click to collapse
I think there is a lost+found folder that is created during format. That's true for all ext2/ext3/ext4 partitions.
So this was solved by using a tool from sdcard.org to format my sdcard in a PC. Once formatted with that tool cwm started seeing correctly.
-------
I'm running 3.1 rooted
I've flashed Thor's 1.4.2 recovery.
I have two sd cards: a 2g and an 8g.
Both work when accessed on a PC and on the iconia.
Neither work in cwm so I can't flash any roms.
I have tried formatting the sdcards on two different PCs. for the 2g I tried both fat and fat32. The 8g is fat32. In every case cwm says it can't mount it.
Additionally, I can't seem to use a USB key, although that may be that i don't know how to use it.
Thanks for any help.
-Bert
When in CWM and you go to install zip from sdcard do you see any folders where you choose the zip. Just wondering if it isn't mounted already. Physical sdcard is in /mnt/external_sd
and not /mnt/sdcard.
PsychosisNC said:
When in CWM and you go to install zip from sdcard do you see any folders where you choose the zip. Just wondering if it isn't mounted already. Physical sdcard is in /mnt/external_sd
and not /mnt/sdcard.
Click to expand...
Click to collapse
Thanks for your reply. I'm prety sure It's not mounted already.
I'm attaching a screenshot to show the exact message I get when trying to browse for a zip. I get a similar message when I go to mounts and storage and try to mount the sdcard.
im bumping this because I'm really becoming concerned that the device is defective in some way.
I'm hoping that someone can give me some guidence on what I may be doing wrong.
So, brosell, did you figure out a solution? I have the exact same problem - cannot mount sdcard in recovery and I get the exact same message.
When the system is booted normally, the internal storage mounts ok as /sdcard
EDIT:
It seems CWM treats the external sdcard as /sdcard, not the internal storage. So, to flash an update, you need to place it on an external SD card
I always get that error, and I never had to mount anything using cwm, just booted it selected the zip to flash and flash. I still don't mount anything...?
And the zip goes on the external sd not the inturn
Can't format SC Card in Window. If won't mount.
Guys,
Unfortunately SD cards for Android must be formatted by Android. If the card is not properly formatted CWM can not mount it, nor can CWM format it. The best way to get it properly formatted is to put it into an Android Phone and use its format functions. There really is no way on the Icona Tab to reformat an improperly formatted card or a new formatted card. If you don't have an Android phone borrow a friends. You will know that it is properly formatted when you see a lost files folder created on the card by the Android phone formatting process. This is a common problem that many people encounter when performing their first ROM flash. If it was formatted under windows as FAT 32 you can access it and store on it in normal operation mode. But ClockWorkMod can not mount it in recovery mode. Hope this helps. Good luck.
Can mount SD card in Recovery
I should have also mentioned last night in my post here, that my experience has been that it is much easier to flash a new custom ROM from a USB thumb drive. Flashing a custom ROM from USB seems to be less problematic than from an SDCard that appears otherwise to be good and formatted with FAT32, but CWM can't mount it. You can fast format the thumb drive on Windows to clean it off. Then copy your custom .zip ROM to be flashed on to the thumb drive from within Windows then insert it into the USB port of your Icona Tab, boot into CWM recovery (I'm assuming you know how to do that so I won't go into it here.) I forget exactly where in the CWM menu it is, it might be under the CWM advanced sub-menu but it say's something to the effect of Install zip from USB. It always works for me with no problem. The advantage is that you do all your prep work on Windows and then flash from the thumb drive which I believe has an ISO standard across all platforms and usually comes already per-formatted. This is an alternative method if you can't get your SDCard properly formatted (see my previous post in this thread for how to get it properly formatted so that it will mount under CWM.) Again, good luck!
I want to cry!!
I tried re formatting! Nothing! Cmw is not on sd card! Nothing is working! Still stuck on acer start screen! Yes i am a noob! But i read alot into this stuff b4 i do it! I wish there was someone i can have come to my house and do this for me! I have tried everything!!!!!!!!!!! So frustrated!!! Someone pls help me!!!!
in CWM recovery, there are 2 options,sd and "internal sd" i think(for me atleast). i chose the internal sd and it mounts.
brosell said:
So this was solved by using a tool from sdcard.org to format my sdcard in a PC. Once formatted with that tool cwm started seeing correctly.
-------
-Bert
Click to expand...
Click to collapse
Thank You Sir! been looking for this fix for a long time
brosell said:
So this was solved by using a tool from sdcard.org to format my sdcard in a PC. Once formatted with that tool cwm started seeing correctly.
-------
/QUOTE]
thanks brosell, for the solution,
I have a 512MB SD card in the g5360, was FAT formatted. reformatting the sdcard with the tool from sdcard.org worked for me as well, afterwards it could be mounted by the stock recovery
and could install update.zip (prior to install CMW)
kr, Erik
Click to expand...
Click to collapse
I'm up to the part where I browse the SD card for the ZIP file.
Clockwork claims to be showing my SD Card, but it's actually showing my XOOM's internal memory.
What can I do?
I fixed it. It appears to have been an issue with the root.
It somehow became unrooted. Using the universal method, I fixed it and now CWM sees the SD card.
you might want to change you recovery to tiamats or rogues recovery, they are more suitable for the xoom.
just download either in the .zip file and write the zip in cwm recovery.
I like rogues because it allows you to mount a usb drive.
also stay away from rom manager- great for phones but not the xoom
I rooted my Moto Electrify M (which to my knowledge is the same as the Razr M from verizon) and I was attempting to put CM10 on it. I was following the directions from http://forum.xda-developers.com/showthread.php?t=2012093&page=57 and I accidentally deleted my internal storage (which contained my zip files GAPPS and CM10. I now have a rooted/unlocked bootloader phone with no operating system and am unsure how to install CM10.
I attempted using my external SD in another phone to transfer the files. Once I booted up TWRP in recovery mode and attempted to install I could not find said files. I'm a super noob at this whole root thing, please help
I'm not sure what the problem would be, maybe try going into Mount in twrp and unchecking the box for external sd before looking for the files.
to clarify, when I am in "install" there are folders named /sd /sdext etc but there is nothing in the folders. I have tried toggling between external and internal memory while using the install feature.
What version of twrp do you have? I put my rom zips on the root of the sd card, and when I switch twrp from internal to external, everything is right there.
Try using the file manager and see if you can find the files. If you can, but still can't get to them in the install page, use the file manager to move them over to internal storage and see if they appear there.
Do you know how to use fastboot? You could flash cwm recovery instead, and see if that shows the files.
I have version 2.2.2.1 of twrp.
I cannot find them in file manager. I am using a galaxy s2 transfer the files from my pc to the external card. Here are my options for where to store the zip files.
(nvm I can't post links yet)
What I see here is NOT what I see when I use the SD card inside of the Electrify M.
The options available for storing the zip files are not showing up when in the file manager
Interesting.. I would go into fastboot mode and use Matt's Utility to reset the phone to stock and get your OS back. You should already have the right drivers installed, so start up your phone while holding the down volume key to get into fastboot mode, load up the utility and select the first option.
Then I would flash a newer version of TWRP and see if your file browsing issues persist, I'm using twrp 2.5.0.0. Or you could also opt to flash the CWM recovery instead, and see if that fixes your problem. I have used both of these recoveries and never had an issue finding the zips on my external sd.
Another option would be to give Safestrap a try, it will ensure you don't lose your default OS again. Safestrap will let you set up a custom rom installation alongside your stock rom, keeping it perfectly intact.
Fixed it gents. I reformatted my sd card and stuck it in the android folder that was created. I then mounted the external through twrp and found it instantly. My assumption is the problem was user error related. I now have cm10 installed and have my gapps working, but I don't have bluetooth or 4g functionality. Should I make a new thread regarding these problems?
I haven't tried CM10, but honestly I would just try another one(maybe CM10.1 would fix your problems). I'm not big into fixing issues with my roms, I just find one that works and stick with it.
There might be a solution for your problems, and yeah another thread would be the way to go to get more visibility on it, but personally I would just go for Carbon or AOKP or SlimROM, or one of the other options. I have tried out the three I just mentioned, and have had 4G and bluetooth working with each(except Bluetooth on Carbon, I never tested it out but I assume it works)
I wish I could help you more but I just don't know enough to troubleshoot those kind of issues.