Please help me.
I recieved a Droid X from my sister yesterday, and when I went to wipe it, it wouldn't reboot. I can't get it fixed, because it's rooted, and I can't get into Clockwork.
When it's charging, it has a green light, and then when I turn it on, it just loops the splash screen. Please, please, please, please, someone help!!
I would recommend making sure the battery is fully charged then SBF the device.
There's guides for SBFing all over the Internet, as well as other threads here in the Droid X forums explaining the process and files that you will need.
Sent from my DROIDX using XDA App
arikaru said:
Please help me.
I recieved a Droid X from my sister yesterday, and when I went to wipe it, it wouldn't reboot. I can't get it fixed, because it's rooted, and I can't get into Clockwork.
When it's charging, it has a green light, and then when I turn it on, it just loops the splash screen. Please, please, please, please, someone help!!
Click to expand...
Click to collapse
arikaru,
Did you fix the problem? Did you figure out how to SBF?
fintelk said:
arikaru,
Did you fix the problem? Did you figure out how to SBF?
Click to expand...
Click to collapse
No, unfortunately.
But I sent it out via Best Buy, and as of last Monday, I am the proud owner of a new Droid X2. (With a broken battery )
Related
This is my bad day . My Droid 2 Global got stuck on M logo when I tried to root and install the new ROM . I have tried alot of SBF from the Droid 2 but it's seem nothing fix my phone. So, anyone can help me with the new SBF for Droid 2 Global
Which SBF did you use? I'm not aware of one being released for the D2G and using the one for the D2 will certainly screw up your phone.
There isn't a SBF for the D2G yet. You should have waited for it before trying anything like this.
If the sbf did work after you sbf you need to:
1. Pull your Battery.
2. Replace battery and power on while holding down the X key.
3. Wait for the android triangle to load.
4. Press the Search key (the magnifying glass)
5. Use down arrow and navigate to wipe data/factory reset and press OK.
6. Reboot phone.
If that doesn't work than you might be SOL.
If you get the M logo and you have a backup. (always try and restore a backup before you SBF)
Pull your battery and place it back in after 5 seconds or so (we just want the phone completely off)
(while completely off) Plug your phone into the wall charger.
Then turn your phone on. If you get the charging screen press power again.
now you should be in clockwork recovery so you can do a restore if you made a backup.
I've used all the sbf that I searched in this forum but it wasn't work. I think there are a different SBF for Droid 2 Global.
hamabucon said:
I've used all the sbf that I searched in this forum but it wasn't work. I think there are a different SBF for Droid 2 Global.
Click to expand...
Click to collapse
I assumed so but I also assumed that if the boot loader hasn't changed one could /theoretically/ flash the 2.3.2 sbf and /possibly/ be okay. I wouldn't recommend any D2 G users to flash ROMs or anything until the SBF specifically for the D2 Global is released. I would suggest rooting and getting a backup made if the user want's to eventually flash ROMs.
newk8600 said:
I assumed so but I also assumed that if the boot loader hasn't changed one could /theoretically/ flash the 2.3.2 sbf and /possibly/ be okay. I wouldn't recommend any D2 G users to flash ROMs or anything until the SBF specifically for the D2 Global is released. I would suggest rooting and getting a backup made if the user want's to eventually flash ROMs.
Click to expand...
Click to collapse
I have tried to flash the 2.3.2 but everything seem wrong and I have the Critical error 0047
hamabucon said:
I have tried to flash the 2.3.2 but everything seem wrong and I have the Critical error 0047
Click to expand...
Click to collapse
Did you make a backup with koush's bootstrapped clockwork recovery? if so you should try and restore it. otherwise you might be out of luck until the sbf drops.
Maybe I'm out of Luck . But is there a chance to update the new ROM using the stock Recovery ? . I saw there are the option apply: update.zip
It will only work if you have the rom signed with moto's keys or it won't get through. That's why we use koush's bootstrapped clockwork. Because it doesn't have signature verification. Well it does but we can toggle it off.
Sent from my DROID2 using XDA App
Can you estimate when the SBF for D2 G release ?
newk8600 said:
If the sbf did work after you sbf you need to:
1. Pull your Battery.
2. Replace battery and power on while holding down the X key.
3. Wait for the android triangle to load.
4. Press the Search key (the magnifying glass)
5. Use down arrow and navigate to wipe data/factory reset and press OK.
6. Reboot phone.
If that doesn't work than you might be SOL.
If you get the M logo and you have a backup. (always try and restore a backup before you SBF)
Pull your battery and place it back in after 5 seconds or so (we just want the phone completely off)
(while completely off) Plug your phone into the wall charger.
Then turn your phone on. If you get the charging screen press power again.
now you should be in clockwork recovery so you can do a restore if you made a backup.
Click to expand...
Click to collapse
I have the same problem with the droid 2, except i mistakenly flashed with the droid 2 global without really thinking about it. I'm stuck at the M logo, and i've tried doing all of the above but i cannot get into clockwork recovery. Any suggestions? if I bricked my phone, how would i go about getting it fixed from verizon?
I remembered that i install the stock ROm deodexed for Droid 2 Global . But why my phone bricked ? Is that the problem from my phone?
dotmike said:
I cannot get into clockwork recovery. Any suggestions? if I bricked my phone, how would i go about getting it fixed from verizon?
Click to expand...
Click to collapse
You should sbf your droid 2 with the 2.3.2 sbf. Search in droid 2 android development section. There are two ways to flash it. One in windows the other in linux. I made a tool so people can use any computer to flash in linux. Search in the android development section for the droid 2 and it's there if you need it. I recommend reading and reading and reading then flash it. You'll be wiser and you'll know each step before you do it. It's not difficult and if you are going to flash ROMs you need to need to know how to sbf.
If your phone boots it's not bricked. And read every post here before trying to return it to verizon. If you have the desire to flash ROMs to your phone you can to the research to fix any mishaps. If after you read every post and you still have no idea or the methods applied haven't worked then you have my permission to take it back to verizon with the excuse that the update messed up your phone. Thanks and happy fixing!
Sent from my DROID2 using XDA App
I have just bought another Droid 2 Global , is that work if I have a nandroid backup from the new one and use for the bricked one ?
newk8600 said:
You should sbf your droid 2 with the 2.3.2 sbf. Search in droid 2 android development section. There are two ways to flash it. One in windows the other in linux. I made a tool so people can use any computer to flash in linux. Search in the android development section for the droid 2 and it's there if you need it. I recommend reading and reading and reading then flash it. You'll be wiser and you'll know each step before you do it. It's not difficult and if you are going to flash ROMs you need to need to know how to sbf.
If your phone boots it's not bricked. And read every post here before trying to return it to verizon. If you have the desire to flash ROMs to your phone you can to the research to fix any mishaps. If after you read every post and you still have no idea or the methods applied haven't worked then you have my permission to take it back to verizon with the excuse that the update messed up your phone. Thanks and happy fixing!
Sent from my DROID2 using XDA App
Click to expand...
Click to collapse
The phone is Droid 2 Global. There is no sbf available for D2G yet. More and more users are getting confused. Please vote in the thread for dedicated section for D2G @XDA!
Sent from my Milestone using Tapatalk
hamabucon said:
I have just bought another Droid 2 Global , is that work if I have a nandroid backup from the new one and use for the bricked one ?
Click to expand...
Click to collapse
You could try, but you need to get into cw recovery on the broken one first...
Sent from my Milestone using Tapatalk
leobg said:
The phone is Droid 2 Global. There is no sbf available for D2G yet. More and more users are getting confused. Please vote in the thread for dedicated section for D2G @XDA!
Sent from my Milestone using Tapatalk
Click to expand...
Click to collapse
I was not commenting to hamabucon I was talking to dotmike who it seems has an Orginal Droid 2 (not global) and the advice is NOT for the Droid 2 Global. I'm sorry if it's confusing he posted in a thread about the D2 G and I was trying to help him where he posted his problem. I have not suggested that there is an Sbf for the D2 G. Sorry for the confusion but if we all read what each post relates to will help.
Sent from my DROID2 using XDA App
, Still wait for my little hopeness
leobg said:
The phone is Droid 2 Global. There is no sbf available for D2G yet. More and more users are getting confused. Please vote in the thread for dedicated section for D2G @XDA!
Sent from my Milestone using Tapatalk
Click to expand...
Click to collapse
newk8600 said:
I was not commenting to hamabucon I was talking to dotmike who it seems has an Orginal Droid 2 (not global) and the advice is NOT for the Droid 2 Global. I'm sorry if it's confusing he posted in a thread about the D2 G and I was trying to help him where he posted his problem. I have not suggested that there is an Sbf for the D2 G. Sorry for the confusion but if we all read what each post relates to will help.
Sent from my DROID2 using XDA App
Click to expand...
Click to collapse
Yes, apologies for taking over a thread with my question, however to newk8600, I didn't know that holding the up key on the keyboard booted into the bootloader! I managed to sbf from there since RSDLite read the phone then.
Apologies for any confusion, and thank you again for the help.
I just got milestone x and got it rooted and then bootstrapped recovery installed liberty rom gb and am now stuck at the boot logo I cannot reboot in to recovery and do not know what to do cannot find any sbf's back to stock any help please .
any help would be great
I have been sitting here for about 2 hours now trying to fix this and have not found the answer i found a generic sbf file but it will not flash this is really frustatrating i just got this phone today and my fiance got the original milestone which works great rooted and running rom but i rooted milestone x bootstrapped btw its alltel network and now after installing liberty gb it is just stuck at the boot logo yellow fist i have searched to no avail and would love some advice or maybe a direct link to the sbf so i can at least try and go stock and try over again thanks.
to be honest im having a similar problem with my droid x but cannot find a direct link to an sbf to save my soul
EVERY THING I FIND IS A RUN AROUND and constant ads and nothing is helping
I wish you the best of luck
ty
yea this is very disheartening lack of support alltogether for the milestone x really just depressing at this point was so excited to get this and root it and get it running snappy and now i know its not bricked but i need help to get it back to stock so i can start over.
Try this thread...
http://www.droidxforums.com/forum/droid-x-rs-guides/12015-complete-droid-x-sbf-flashing-guide.html
Sent from my DROIDX using XDA Premium App
hey feel you pain it sucks to have a phone that is just a generic one on a regional carrier with no support like people on verizon can get
mikeew83 said:
I just got milestone x and got it rooted and then bootstrapped recovery installed liberty rom gb and am now stuck at the boot logo I cannot reboot in to recovery and do not know what to do cannot find any sbf's back to stock any help please .
Click to expand...
Click to collapse
Ehhh?...
http://forum.xda-developers.com/showthread.php?t=1117885
Looking for the sbf for this in case of needing to go stock would really appreciate some help
Sent from my DROIDX using Tapatalk
mikeew83 said:
Looking for the sbf for this in case of needing to go stock would really appreciate some help
Sent from my DROIDX using Tapatalk
Click to expand...
Click to collapse
Here is your link
SBF flash for Alltel MB809 - Milestone X
SHADO_X6_3.1.39_SHADOW_BP_C_02.06.00R_AP_BP_Flex_20_signed_secure_alltel_1ff_P3_USERBLD.sbf.gz
http://www.fileserve.com/file/sAXdN...20_signed_secure_alltel_1ff_P3_USERBLD.sbf.gz
Compression MD5 - 8E155E9189BE6E619CB2E46C7718BF1E
SBF MD5 - 9C67A33735D0ED84155034FB36797C83
holy crap! you don't know how long I have been waiting for this and I don't think it would ever come!!! how did you get this!?
Ty so much is this tested
Sent from my DROIDX using Tapatalk
yes it does work but it changes the build number to AWCC which I have no idea what that means, the build I had on it before was RETAIL
EDIT:
Just realized that this is for the AWCC Alltel, unfortunately for me I am on the alltel which Is still being switched to VERIZON. Phone still works though.
ive tried this an i just get error when flashing
krause11 said:
ive tried this an i just get error when flashing
Click to expand...
Click to collapse
it would help to know what error. lol
Milestone SBF on Droid X
I have a rooted Droid X that I flashed to alltel's network, however certian things like 3G and MMS were not working so I thought I would try to flash the alltel SBF to the phone and it worked! Kinda...it just isn't booting...I think it just needs to be wiped and SBF flashed again but I'm not sure. Either way now I'm stuck with a phone that I can't boot. Any ideas?
I figured it out...just needed to get into recovery by booting with home button and pressing the search button and wiping...after that I did another wipe and now everything is working perfectly, I think...still have to check the MMS but 3G is working like a champ!
just wanted to leave some important info concerning "STANDALONE GPS"
on my MB810`s i am not activated and have the BLUE TRIANGLE in notification bar with my stock OTA FROYO 2.2.340 or my OTA GB 4.5.596 on both my DX`s
you can not get STANDALONE GPS working if you have VZW and no activation!!!
i flashed to this alltel SBF from above and i have STANDALONE GPS and alot less bloatware from verizon
so we are running android 2.2.1....
is there no GB for this MB809?
i know this is an old thread but i know google tends to lead people to this thread so i needed to post. found out today alltel updated their activation number and therfor or atleast in my area this sbf will not let my activate my phone due to the built in old one. if anyone has any solutions please post it even if this thread is old. im also active in the droidxforums i know many people are eventually going to run into this problem as well.
thanks
thore022 said:
i know this is an old thread but i know google tends to lead people to this thread so i needed to post. found out today alltel updated their activation number and therfor or atleast in my area this sbf will not let my activate my phone due to the built in old one. if anyone has any solutions please post it even if this thread is old. im also active in the droidxforums i know many people are eventually going to run into this problem as well.
thanks
Click to expand...
Click to collapse
what change? what the new way?
No, there hasn't been a Gingerbread release for the Milestone X that the regional carriers use. Hopefully it'll come.
So what's a guy supposed to do to get a DroidX to work on Alltel?
Just flash the Alltel SBF and everything will work just fine. Make sure you don't try to SBF back to 2.2 once you get the 2.3.5 update or it will brick your phone.
Anyone know is there is a Verizon software version that will also leave a brick if you try to SBF to Alltel? I have an X that someone wants me to flash but i'm scared to screw their phone up. It has the 2.3.3 version.
please help need milestone x altell sbf file most of the links are dead.
rob151200 said:
please help need milestone x altell sbf file most of the links are dead.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=22450891&postcount=21
ok guys i flashed darkslide and everything was fine...
i rebooted and now im stuck at the motorola M sign...
how can i get into clockworkmod or is this normal? please help
of course its a droid x
At this point your going to have to SBF. If you've never SBFed before, don't worry. It's really easy and there is tons of guides.
Best of luck to you! =D
Sent from my DROIDX using XDA App
Hello all, I am pretty new to this forum but would like to ask a quick question. My dads droid X is stuck in the stock bootloader with the android man with exclamation point triangle. We have factory wiped it several times, wiped the cache, and still no luck. it's running 2.3.7 gingerbread with the read moto boot logo. not sure what to do, would be greatly appreciated if anyone could help.
Yep you sure did wipe it. Lol.
Sbf time dude and stay away from.621 if you can. It's a stupid update and pretty much leaves you in limbo.
Can you get into recovery?
First off it will help us out to help you if you tell us about your phone:
Firmware? (Which update)
Stock? Rooted? Romed? Cwm? bootstrap?
Did you buy it Jew? Used?
All info will help. Unfortunately if you do not know the firmware, and cannot get into recovery you will be stuck with doing the 621 because You will hard brick your phone trying sbf back to an older model.
Tell us exactly the steps you have done to get to where you are. Post back.
Edit: there's some Good links here:
http://forum.xda-developers.com/showthread.php?t=1957088
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2