I'm trying to flash original amazon ROM with TWRP. But I'm getting:
E:failed to mount /sdcard (Invalid argument)
E:Can't mount /sdcard/update.zip
Any ideas how to fix this?
UPDATE:
"E:failed to mount /sdcard (Invalid argument)" basically means that your sdcard is not formatted correctly.
I finally found the way to fix this.
Related
Just flashed official b162 from aurora_ics. I had to wipe caches and data, so the installation process would start. After that phone boots, and goes to "android system recovery", where it says:
E: cant mount @ (or /dev/block/mmcblk0p6)
(invalid argument)
E:Cant mount cache:recovery/command
E:--->open cache partition failed
E:Cant mount @ (or /dev/block/mmcblk0p6)
(invalid argument)
E:Cant mount CACHE:recovery/log
E:cant open cache:recovery/log
E:Cant mount @(or /dev/block/mmcblk0p6)
(invalid argument)
So what could I do?
Wipe data in recovery and it will work.
thanks, it worked! Didn't think it would be that easy
Hello to all
I Have A Problem .
My Nexus 7 2012 Device Can Not Start , Automatic Going To Recovery Mod And Get This Error On Display :
Code:
E:failed to mount /cache (Invalid argument)
E:Can't mount /cache/recovery / log
E:Can't open /cache/recovery / log
E:failed to mount / cache (Invalid argument)
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
E:failed to mount /cache (Invalid argument)
E:Can't mount /cache/recovery/last_install
E:Can't open /cache/recovery/last_install
E:failed to mount /cache (Invalid argument)
Fastboot Not Working !
Please View Attachment Image .
Please Help Me , Thanks
Up !
safinoor said:
Hello to all
I Have A Problem .
My Nexus 7 2012 Device Can Not Start , Automatic Going To Recovery Mod And Get This Error On Display :
Code:
E:failed to mount /cache (Invalid argument)
E:Can't mount /cache/recovery / log
E:Can't open /cache/recovery / log
E:failed to mount / cache (Invalid argument)
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
E:failed to mount /cache (Invalid argument)
E:Can't mount /cache/recovery/last_install
E:Can't open /cache/recovery/last_install
E:failed to mount /cache (Invalid argument)
Fastboot Not Working !
Please View Attachment Image .
Please Help Me , Thanks
Click to expand...
Click to collapse
Hi, safinoor...
It looks as though you might have some kind of partition corruption... If this is the case, then it's beyond my technical abilities to help you.
However, you mention that you can't access fastboot...
So what happens when you... Long Press VOL DOWN + HOLD.... whilst holding, Long Press POWER BUTTON.
Hold both buttons for a good 30 seconds, and this should 'break' you out of whatever state your Nexus 7 is currently in (and from your screenshot, it looks like the stock recovery from the last version of KitKat 4.4.4 - KTU84P), and boot you into the bootloader, and hopefully from there, you **should**, hopefully, be able to fastboot flash a factory stock image.
Hope this helps..
Rgrds,
Ged.
Hi,
Today I having a problem.
My phone is bootloop, so I want to re-install ROM via TWRP. Then I can't Wipe data, cache, etc. because the log said when failed to mount.
Could not mount /data and unable to find crypto footer.
Failed to mount '/data' (Invalid Argument)
Failed to recreate /data/media folder.
Failed to mount '/cache' (Invalid Argument)
Updating partition details...
Failed to mount '/system' (Invalid Argument)
Failed to mount '/data' (Invalid Argument)
Failed to mount '/cache' (Invalid Argument)
...done
Unable to mount storage
Failed to mount '/data' (Invalid Argument)
Full SELinux support is present.
Unable to mount /data/media/TWRP/.twrps
MTP Enabled
Click to expand...
Click to collapse
Then I look for the solution on google, many tutorial said when you are need to 'Format Data' then 'Reboot Recovery'. But when I tried to do. Then
Formatting Data using make_ext4fs...
Failed to mount '/data' (Invalid Argument)
Failed to mount '/data' (Invalid Argument)
Failed to recreate /data/media folder.
You may need to reboot recovery to able to use /data again.
Updating partition details
Failed to mount '/system' (Invalid Argument)
Failed to mount '/data' (Invalid Argument)
Failed to mount '/cache' (Invalid Argument)
...done
Click to expand...
Click to collapse
And the other one said when you need to enter the password to encrypt your data. But the problem here, when I opened TWRP there was no notice to decrypt using password. I can't find the password form.
So anyone please help me, I only can open Fastboot Mode.
Thanks before
Tried wiping cache partition, wiping data/factory reset before flashing stock ROM.
Error flashing stock ROM, used G935FXXS2ERH6_G935FOLB2ERGE from sammobile.
Error after flash stock ROM:
#fail to openrecovery_cause(No such file or directory)#
#Reboot Recovery Cause is [UNKNOWN]#
No Support SINGLE-SKU
File-Based OTA
E:failed to mount /efs (Invalid argument)
Supported API: 3
E:failed to mount /efs (Invalid argument)
E:failed to mount /efs (Invalid argument)
E:failed to mount /efs (Invalid argument)
dm-verity verification failed..
E:failed to mount /efs (Invalid argument)
E:failed to mount /efs (Invalid argument)
E:failed to mount /efs (Invalid argument)
E:failed to mount /efs (Invalid argument)
E:failed to mount /efs (Invalid argument)
E:failed to mount /efs (Invalid argument)
E:failed to mount /efs (Invalid argument)
E:failed to mount /efs (Invalid argument)
E:failed to mount /efs (Invalid argument)
E:failed to mount /efs (Invalid argument)
E:failed to mount /efs (Invalid argument)
E:failed to mount /efs (Invalid argument)
Also tried flashing with TWRP via ODIN but failed due to FRP lock.
Can anyone help or have experienced the same issue?
Did you try to FORMAT data (not wipe)?
123keelos said:
Did you try to FORMAT data (not wipe)?
Click to expand...
Click to collapse
Yup, I also did that too.
- Are you flashing the ROM via TWRP?
- Wipe DATA, then FORMAT data
- Head into DOWNLOAD mode and flash the stock ROM via ODIN (make sure there is a file that matches CSC, BL, AP, etc)
123keelos said:
- Are you flashing the ROM via TWRP?
- Wipe DATA, then FORMAT data
- Head into DOWNLOAD mode and flash the stock ROM via ODIN (make sure there is a file that matches CSC, BL, AP, etc)
Click to expand...
Click to collapse
Don't have TWRP because it was blocked by FRP when I flashed ROM with TWRP via ODIN.
6r3k0z said:
Don't have TWRP because it was blocked by FRP when I flashed ROM with TWRP via ODIN.
Click to expand...
Click to collapse
What carrier is your device running from? Some carriers prevent any sort of modifications on their phones (like at&t)
Take a look at this: https://forum.xda-developers.com/s7-edge/help/to-bypass-frp-lock-s7-edge-sm-g935f-fd-t3816607
6r3k0z said:
Tried wiping cache partition, wiping data/factory reset before flashing stock ROM.
Error flashing stock ROM, used G935FXXS2ERH6_G935FOLB2ERGE from sammobile.
Error after flash stock ROM:
#fail to openrecovery_cause(No such file or directory)#
#Reboot Recovery Cause is [UNKNOWN]#
No Support SINGLE-SKU
File-Based OTA
E:failed to mount /efs (Invalid argument)
Supported API: 3
E:failed to mount /efs (Invalid argument)
E:failed to mount /efs (Invalid argument)
E:failed to mount /efs (Invalid argument)
dm-verity verification failed..
E:failed to mount /efs (Invalid argument)
E:failed to mount /efs (Invalid argument)
E:failed to mount /efs (Invalid argument)
E:failed to mount /efs (Invalid argument)
E:failed to mount /efs (Invalid argument)
E:failed to mount /efs (Invalid argument)
E:failed to mount /efs (Invalid argument)
E:failed to mount /efs (Invalid argument)
E:failed to mount /efs (Invalid argument)
E:failed to mount /efs (Invalid argument)
E:failed to mount /efs (Invalid argument)
E:failed to mount /efs (Invalid argument)
Also tried flashing with TWRP via ODIN but failed due to FRP lock.
Can anyone help or have experienced the same issue?
Click to expand...
Click to collapse
Can you please clarify which rom,CSC,PDA you had before this failed flashing?
Take care, if you changed the room ,then you try to flash the same room ,always put the 4 .tar ap,bl,cp,csc.
Sent from my Galaxy S7 Edge using XDA Labs
Trying to fix my girlfriend's tablet, she needs a bunch of artwork that's on it.
I'm not sure how, but it seems it has gotten stuck in a boot loop at low battery. Screen won't turn on without being plugged in. When the tablet is plugged in, it jumps to the title screen (Galaxy Tab A with S Pen) and then goes to a blue "installing system update" screen. After hanging there for a second it shows this screen dump:
No Support SINGLE-SKU
Supported API: 3
E:failed to mount /efs (invalid argument)
E:failed to mount /efs (invalid argument)
dm-verity error...
E:failed to mount /cache (invalid argument)
E:failed to mount /cache (invalid argument)
E:failed to mount /cache (invalid argument)
E:failed to mount /cache (invalid argument)
E:Can't mount /cache/recovery/last_kernel_manual
E:Can't open /cache/recovery/last_kernel_manual
E:failed to mount /cache (invalid argument)
E:failed to mount /system (invalid argument)
E:failed to mount /cache (invalid argument)
E:Can't mount /cache/recovery/last_locale
I've tried to reboot into recovery and have left it in the loop for a couple hours hoping it would charge enough to turn on without being plugged in, but nothing's worked so far. I'm real worried that it's DOA, but I'm holding out hope that there's someone one in the forum that might know of something I can do to save it. I've googled some of the stuff in the dump but nothing's been helpful as far as a fix.
Model: SM-P580
I don't believe it's unlocked or rooted, should just be vanilla. Not sure of the android version, but I know that she hasn't used it regularly in probably a year plus.
Any help or advice is appreciated!!
Based on what it says, I think something happend and cause the kernel to be inaccessible. You could get wanntary from Samsung and have Samsung fix it. If she did not root the thing, wanntary should still be vaild. You could reinstall the os in Odin and I tried it on my SMT380 and I kept all of my data so her artwork should still be there.
captainkirk1701 said:
Trying to fix my girlfriend's tablet, she needs a bunch of artwork that's on it.
I'm not sure how, but it seems it has gotten stuck in a boot loop at low battery. Screen won't turn on without being plugged in. When the tablet is plugged in, it jumps to the title screen (Galaxy Tab A with S Pen) and then goes to a blue "installing system update" screen. After hanging there for a second it shows this screen dump:
No Support SINGLE-SKU
Supported API: 3
E:failed to mount /efs (invalid argument)
E:failed to mount /efs (invalid argument)
dm-verity error...
E:failed to mount /cache (invalid argument)
E:failed to mount /cache (invalid argument)
E:failed to mount /cache (invalid argument)
E:failed to mount /cache (invalid argument)
E:Can't mount /cache/recovery/last_kernel_manual
E:Can't open /cache/recovery/last_kernel_manual
E:failed to mount /cache (invalid argument)
E:failed to mount /system (invalid argument)
E:failed to mount /cache (invalid argument)
E:Can't mount /cache/recovery/last_locale
I've tried to reboot into recovery and have left it in the loop for a couple hours hoping it would charge enough to turn on without being plugged in, but nothing's worked so far. I'm real worried that it's DOA, but I'm holding out hope that there's someone one in the forum that might know of something I can do to save it. I've googled some of the stuff in the dump but nothing's been helpful as far as a fix.
Model: SM-P580
I don't believe it's unlocked or rooted, should just be vanilla. Not sure of the android version, but I know that she hasn't used it regularly in probably a year plus.
Any help or advice is appreciated!!
Click to expand...
Click to collapse
Kindly do tell me if you ever succeeded on this issue you had, and what you did?