Hi updated my tab with the official update.zip found here and now i'm under 3.1, but if i connect my PS3 pads they just charge and i can't get them to work with Snesoid or in the homescreens like i saw in a bunch of videos from Xoom and Transformers.
There's a workaround or the A500 version of 3.1 lacks of this feature (it would be very disappointing)?
DJ_Jedi said:
Hi updated my tab with the official update.zip found here and now i'm under 3.1, but if i connect my PS3 pads they just charge and i can't get them to work with Snesoid or in the homescreens like i saw in a bunch of videos from Xoom and Transformers.
There's a workaround or the A500 version of 3.1 lacks of this feature (it would be very disappointing)?
Click to expand...
Click to collapse
i have the same problem
or they use a third part things to make them able to play...
Did you go into Settings _> Language & Input -> Keyboard Settings ->
Configure Input Devices and turn on the PS3 Controller
then back and
Current Input Method and choose the PS3 controller
I know I have to do something similar for the WiiControllerIME
MurderCity420 said:
Did you go into Settings _> Language & Input -> Keyboard Settings ->
Configure Input Devices and turn on the PS3 Controller
then back and
Current Input Method and choose the PS3 controller
I know I have to do something similar for the WiiControllerIME
Click to expand...
Click to collapse
Thanks, but no luck, it doesn't see the controller. I think i'll mail Acer to ask about this.
EDIT: just tried a wireless mouse, it works like a charm. I think they have dropped the controller drivers
DJ_Jedi said:
Thanks, but no luck, it doesn't see the controller. I think i'll mail Acer to ask about this.
EDIT: just tried a wireless mouse, it works like a charm. I think they have dropped the controller drivers
Click to expand...
Click to collapse
i plan to try my madcatz ps3 fightpad tonight, it's wireless with a dongle.
if i remember correctly, 3.1's gamepad support is for usb hid gamepads. the bluetooth ps3 pads may require a bit more to just work.
But i connected it via USB, not with bluetooth. I dont have different pads, just 2 PS3 ones, but i dont understand why on Xoom and Transformers they works and on A500 not.
I could be wrong, but pretty sure using the USB cord with factory ps3 controllers does not make them USB controllers! The USB is ONLY for charging ps3 controllers. They are bluetooth 100% of the time(mine are this way). And just as the way you use them with ps3, they must be synced to work.
My advice, just get a cheap USB controller, maybe even one for windows PC. They are usually around $5. Or find a knockoff ps3 controller found on many of the chinese sites for about the same money...should work till BT PS3 controller is sorted.
oasisautospa said:
I could be wrong, but pretty sure using the USB cord with factory ps3 controllers does not make them USB controllers! The USB is ONLY for charging ps3 controllers.
Click to expand...
Click to collapse
You're wrong. On windows they work with USB cable.
They work USB on PS3 too, for example when they are in charge or you enter in recovery mode.
More sixaxis and DS3 work with Xoom and Transformers (in a video the guy says: "you just need to connect and press the PS button").
Agosh13 said:
You're wrong. On windows they work with USB cable.
Click to expand...
Click to collapse
Out of the box, the PS3 controllers are charge-only over USB. You have to use a third-party driver to use the PS3 controller over USB on a PC. The only console controller drivers built-in to Windows OS are for the XBox controllers (for obvious reasons).
Even on the PS3 system, if you plug the controller in to the USB ports while playing, it will use Bluetooth if it's available. If for some reason Bluetooth is not available then the PS3 will resort to USB as if it was a PS2 controller, but you won't have the full PS3 controller functionality (which is why Sony has it default to Bluetooth whenever possible).
But on Honeycomb 3.1 they probably embeded the driver because on the other 2 it works out of the box.
I have a retrolink USB nes game pad that I was going to try with Nesoid. The buttons work in menus and such, but the direction pad does not
The buttons don't seem to return any particular key press, so it doesn't seem mappable.
Sent from my A500 using XDA Premium App
Just did some more testing with a few more USB devices I had laying around. My saitek joystick lets me navigate menus and button presses will do things like open programs, it doesn't seem to work in nesoid. I have an old nostromo n50 game pad, the kind you rest your left hand on. It works perfect with nesoid.
Sent from my A500 using XDA Premium App
i have 3 sixaxis and 2 dual shocks and neither work. i'll try a third party ps3 nyko controller next i guess.
internetpilot said:
Out of the box, the PS3 controllers are charge-only over USB. You have to use a third-party driver to use the PS3 controller over USB on a PC. The only console controller drivers built-in to Windows OS are for the XBox controllers (for obvious reasons).
Even on the PS3 system, if you plug the controller in to the USB ports while playing, it will use Bluetooth if it's available. If for some reason Bluetooth is not available then the PS3 will resort to USB as if it was a PS2 controller, but you won't have the full PS3 controller functionality (which is why Sony has it default to Bluetooth whenever possible).
Click to expand...
Click to collapse
NO. The controller can work with bluetooth or with USB. There aren't charge only over USB.
OTG cable doesnt make a difference either-. Nio micro usb support. For my ps3 controller.
I want to know why on Transformers and Xoom the DS3 works...
no luck on nyko zero ps3 controller either, though its junk anyway.
i wish i had wired xbox 360 controllers but i only have those in wireless
Agosh13 said:
NO. The controller can work with bluetooth or with USB. There aren't charge only over USB.
Click to expand...
Click to collapse
When using a PS3 controller with a PS3 system, it will use bluetooth connectivity whenever possible. If for some reason a controller will not sync with the PS3, you can get it to connect over USB, but that's not the preferred/default method. You can easily see this to be true when you're playing a game while charging your controller via USB. Unplug the USB cable -- did your controller lose connectivity? No, because it was always connected via bluetooth. Otherwise, if it lost USB connectivity it would have to reconnect via bluetooth when you disconnected the cable.
As for the PS3 controller on other devices via USB or bluetooth, to the best of my knowledge every single device requires drivers. This includes Android v3.1 devices -- some of them just have the driver built-in to their ROM. Apparently, Acer did not include that.
Anybody have any luck with connecting their xbox remotes? Via bluetooth or USB?
Ive connected it but it doesnt work so far, kind a of a let down.
Any suggestions are welcome.
I'm an xbox dude so thats why i opened this thread.
The xbox remotes use infrared so no dice there. There has been muliple posts and videos on youtube showing how to connect a wireless controller but that requires a donagle
Sent from my A500 using XDA Premium App
Do you mean the infrared media remote? Or the xbox 360 game controllers?
sucks for 360 owners I have both and ps3 remotes work fine
Remote is a no go, wired controls OK and wireless with dongle is ok
Sent from my A500 using Tapatalk
xbox 360 wireless
Back when halo came out for the pc I went out and bought a usb dongle to use a wireless xbox 360 controller on my pc. Now I can plug that dongle into my a500 and use a xbox controller wirelessly.
Thank you
codemansGT said:
Back when halo came out for the pc I went out and bought a usb dongle to use a wireless xbox 360 controller on my pc. Now I can plug that dongle into my a500 and use a xbox controller wirelessly.
Click to expand...
Click to collapse
So I bought a USB dobgle thing will it work on Acer iconia a500?
Anyone tried a 360 or PS3 controller on this tablet ?. I have a wireless 360 controller with the usb adapter lead but the 10 doesn't pick it up. They are pretty cheap on ebay but not sure which to get :-
PS3 controller £9.99 (around $15) - Works via bluetooth and uses its own battery.
360 wired controller £12.99 (around $20) - Plugs via OTG but will draw power from the tablet.
Both I think are knock off versions so might not even work lol
There are apps on the market that provide the software and drivers needed for either a PS3 controller or xbox 360 wired controller via OTG. Then you can use either one to play emulated games
As for your cheap ebay controllers, i'm not sure.
Sent from my SPH-D710 using xda premium
On other devices you could use the PC Wirless adapter for the 360 via USB, and use wireless 360 controllers. The nexus 10 doesn't seem to even turn it on via otg though :/
Im in the same predicament kinda sad the ` ultimate tablet' it's the one that least has hardware support
I can't comment on the ps3 but the Xbox 360 wired controller works just fine for me.
Sent from my Nexus 10 using xda app-developers app
mug2k said:
Anyone tried a 360 or PS3 controller on this tablet ?. I have a wireless 360 controller with the usb adapter lead but the 10 doesn't pick it up. They are pretty cheap on ebay but not sure which to get :-
PS3 controller £9.99 (around $15) - Works via bluetooth and uses its own battery.
360 wired controller £12.99 (around $20) - Plugs via OTG but will draw power from the tablet.
Both I think are knock off versions so might not even work lol
Click to expand...
Click to collapse
I have both a wireless 360 controller and a cheap 360 replica. Both work like they should when I connect them via OTG to the Nexus 10.
Also, connecting a mouse and a keyboard works with OTG.
I read that OTG cables are different from each other, it may or may not work depending on the cable.
I have used both and I prefer the ps3 controller. I use the otg cable with both. If you root the N10 you can you use the ps3 controller via bluetooth with an app called six axis. You don't need an app if just using the otg cable.
Sent from my SAMSUNG-SGH-I317 using xda premium
Ps4 controller, jk. Obviously ps3, root your device and use sixaxis controller as more ppl says... all games work with it .
is it possible or I still have to use otg cable on my galaxy s4?
dont know about PS3 controllers bro
I play with Xbox Wireless Controller via OTG without root
PS3 should work well
yeah otg work well with the ps3 controller, I tried it before. I'm just wondering if i could connect my ps3 controller wirelessly via blue tooth without rooting my galaxy s4.
Anybody using a gamepad (USB or bluetooth PS3, XBOX...) with CM11?
What about those specially designed Android gamepads?
I'd love to use Wiimote.
I can't seem to get anything working over bluetooth, so I'm thinking of getting a USB X360 contoller?
There is a program called Sixaxis controller in playstore
it can make you connect original ps3 controller and also it has a mapping tool for games that doesnt support gamepads ,, sorry I dont know anything about connecting wiimote or xbox 360 controller , but im sure about ps3 controller