Database Users

[Q] Another Bricked KF for the Pile [SOLVED]

I looked through A LOT of bricked KF threads but I can't fix the issue that I'm having. Before I found this forum and the very useful looking tools that it provides (KFU, etc) I managed to root my KF by using adb and pushing / installing burritoroot by the command prompt. Everything looked OK, I installed su and got root access to work in the adb shell as well as for apps.
I attempted, without much success, to get the Android Market working on my KF but it always crashed. I messed with some permissions like for /system/app, but I changed that one back to match the other folders in /system.
I may have deleted an apk out of /system/app that wasn't the Android Market, but I'm not sure...
Anyway, I tried to reboot my KF and it got stuck in a boot logo loop. It reports a boot mode of 4000 (normal).
I tried the fastboot recovery method and also KFU, but there are some issues:
Root access seems to have disappeared (access through adb shell cannot be elevated)
Burritoroot will not install anymore through KFU (I get the message "Error: Could not access the Package Manager. Is the system running?"
The above message also occurs when I try to use the adb install command
Fastboot never recognizes the device. It sits on <Waiting for Device> forever.
I've tried rebooting the KF while connected and reconnecting the USB.
I made a Factory Cable, but the Fastboot condition is the same.
I uninstalled my Windows drivers until it showed up as "Kindle" in the Device Manager and installed the files that came with KFU.
I tried the KF Unbrick utility, but that didn't seem to do anything that I missed.
Additionally, when I connect with adb shell I have limited file system access. I can is through /system and some other folders, but I can't access /sdcard and I can't seem to mount the sd card
After writing all this and thinking it through, I decided to compare the /system/app directory on my KF with one in an update.zip file that I downloaded.
It looks like I deleted the file ApplicationsProvider.apk from /system/app
That seems to be the only thing missing.
Is this a Try-to-return-your-KF important file? Is my KF hosed?

fonetik said:
Is this a Try-to-return-your-KF important file? Is my KF hosed?
Click to expand...
Click to collapse
Nope, if you can get fastboot working it doesn't matter how broken /system is. Try this to sidestep the Windows driver problems I think you're having:
http://forum.xda-developers.com/showthread.php?t=1430038
Once you get TWRP installed you can restore from the stock update which will wipe and replace /system.

Thanks I'll give this a shot. I had some issues with Windows when trying to install Cyanogen on my Droid X and a Linux Live-CD got me back on track. Hopefully this will do the trick. I'll report back.

Well, I'm in Ubuntu and I got the firekit stuff up, but it does the same thing. It refuses to connect with fastboot. It just sits at < Waiting for Device >.

I had a similar problem and it was my usb driver set up:
/etc/udev/rules.d/##-android.rules
the ## for Meerkat is 70
SUBSYSTEM==”usb”, ATTR{idVendor}==”0bb4″, MODE=”0666″
Vendorid is 1949 for KF
link that got me going: http://esausilva.com/2010/05/13/setting-up-adbusb-drivers-for-android-devices-in-linux-ubuntu/
sorry if you already know this.

I'm new to this so thanks. I'll try it tomorrow when I get a chance.

fonetik said:
Well, I'm in Ubuntu and I got the firekit stuff up, but it does the same thing. It refuses to connect with fastboot. It just sits at < Waiting for Device >.
Click to expand...
Click to collapse
Are you sure you're in fastboot at that point? Are you using your factory cable? Try doing this to get into fastboot mode and use a different USB cable to connect with fastboot. If that doesn't work, do the same but use Firekit in case the fastboot drivers are messed up.

I'm probably not in fastboot. I'll give this a shot. Thanks again.
Edit:
That seems to have gotten me into Fastboot! I'll see if I can get TWRP installed.
There's a faint pulse =)
Edit 2: TWRP installed OK and I used it to try and install the stock update.zip. It rebooted and then got stuck at the logo again, but I'm going to keep working on it. At least I have a tool I can use.
Edit3: I seemed to be stuck at the TWRP yellow triangle, I think I managed to install FireFireFire, and managed to get back into TWRP. I cleared all my caches and did a factory reset. Then I installed a pre-rooted version of 6.2.1. It did a little reboot dance for a while and then came up into the OS!
Thanks a ton pokey9000. I'm happy to send a couple $$ your way.

fonetik said:
Edit3: I seemed to be stuck at the TWRP yellow triangle, I think I managed to install FireFireFire, and managed to get back into TWRP.
Click to expand...
Click to collapse
Just in case someone else reads this... The Yellow Triangle is not TWRP... it is FireFireFire... TWRP by default is the blue themed screens you get after the FireFireFire icon and will start out saying TEAMWIN in Landscape mode.
BTW, good to hear you fixed the problem. You should edit the original post and change the Subject adding [SOLVED]

krelvinaz said:
Just in case someone else reads this... The Yellow Triangle is not TWRP... it is FireFireFire... TWRP by default is the blue themed screens you get after the FireFireFire icon and will start out saying TEAMWIN in Landscape mode.
BTW, good to hear you fixed the problem. You should edit the original post and change the Subject adding [SOLVED]
Click to expand...
Click to collapse
Sorry about the confusion. It was the FFF triangle, but the KF wasn't going into recovery when I held the power button down. I reinstalled with FFF using adb and it worked. Original post subject updated.

How I was able to unbrick my Kindle Fire

Hi everyone.
I managed to brick my kindle fire within an hour of purchasing it, but using the suggestions on this forum, I was able to get it back up and running in a few hours.
The method that I had to use involved suggestions grabbed from several threads, so I wanted to provide instructions on exactly how I managed to fix mine in case someone ends up in the same situation as me.
For starters, I had just updated my Kindle Fire to 6.2.1 and I was messing around with trying to get the google app manager installed. I rooted the device, and I was changing permissions in the /system/app directory when the device crashed and became stuck on the boot animation. I did not have TWRP installed at the time.
So if you are like me, or in a similar situation, this may be applicable.
These instructions assume that you have adb on your computer.
First, ensure that you are able to communicate with your device using ADB. Verify this by using the command:
adb devices
Click to expand...
Click to collapse
or by using the kindle fire utility and ensuring that the status is online.
If you are not able to communicate with your device AND have the boot animation (right to left reflection across the "Kindle Fire" logo text), you likely have a driver issue.
Several possible ways to resolve this. First, I recommend going to device manager and unistalling the driver for the android phone adb interface. Unplug the kindle fire and plug it in again. The device should show up without a driver as "kindle". Manually apply the proper driver again and check the adb connection. If this does not work, uninstall the driver again and add 0x18d1 at the end of adb_usb.ini on a line underneath "0x1949" and reapply the driver. Toss in a few shutdowns in between some of these steps if you are still having trouble. Hopefully you now have a connection to your device.
If you are not able to communicate with your device AND do not have the boot animation (right to left reflection across the "Kindle Fire" logo text), your kindle fire is in the wrong bootmode (likely fastboot).
To fix this, download fastboot.exe (if you don't already have it) and run the following command, even if you don't have an adb connection)
fastboot -i 0x1949 oem idme bootmode 4000
fastboot -i 0x1949 reboot
Click to expand...
Click to collapse
or if that doesn't work
fastboot -i 0x18d1 oem idme bootmode 4000
fastboot -i 0x18d1 reboot
Click to expand...
Click to collapse
Your kindle fire should restart and now be stuck at the logo with animation, and you should have the ability to communicate with your device through adb now.
Now, you should download the kindle fire firmware (6.2.1 as of the time of writing this) from http://www.amazon.com/gp/help/customer/display.html?nodeId=200790620. Rename this to update.zip and drop it in the same directory as adb.exe on your pc. Execute the following command.
adb push update.zip /sdcard/
Click to expand...
Click to collapse
Now, you need to use fbmode to enable the fastboot mode, per pokey9000's instructions at http://forum.xda-developers.com/showthread.php?p=20755810
Assuming that that was able to complete successfully, you need to flash TWRP 2.0 per pyrostic's instructions at http://rootzwiki.com/topic/12363-ho...our-kindle-fire/page__pid__301703#entry301703
You now should be stuck at a screen with a yellow triangle. Pressing the power button several times until it turns orange should bring you into the recovery screen. Do the following:
Wipe cache
Wipe dalvik cache
Factory reset
Go back to the home screen and select install -> update.zip
And when that's done, you can tell it to reboot.
It'll think for a minute or two at the kindle fire boot, and then it will go into the initial setup screen. You're now the proud owner of a working fact0ry default kindle fire!
Quick note: I wrote this from memory quickly to try to help anyone experiencing problems. I'm no android expert, so if there are ways to improve on this or corrections to be made, please let me know so that the community can benefit.
And I don't want to appear to take undue credit for any of these instructions. I did not come up with anything on this guide on my own, everything came from various threads on this forum. These are just the steps that I followed to successfully bring my kindle fire back from death.

Man, My Kindle Fire does not even get detected by my PC

Now, you need to use fbmode to enable the fastboot mode, per pokey9000's instructions at http://forum.xda-developers.com/show...php?p=20755810
Assuming that that was able to complete successfully, you need to flash TWRP 2.0 per pyrostic's instructions at http://rootzwiki.com/topic/12363-how...03#entry301703
You now should be stuck at a screen with a yellow triangle. Pressing the power button several times until it turns orange should bring you into the recovery screen. Do the following:
Wipe cache
Wipe dalvik cache
Factory reset
Go back to the home screen and select install -> update.zip
And when that's done, you can tell it to reboot.
It'll think for a minute or two at the kindle fire boot, and then it will go into the initial setup screen. You're now the proud owner of a working fact0ry default kindle fire!
****When I run the fbmode I am getting stuck on the boot logo screen. Can someone please help me??

that is normal - you are in fastboot mode now - adb commands don't work in this mode - fastboot commands do - resume with the description ...

Thanks for your post.
I also "bricked" my kindle the day I got it but my issue was not having the correct drivers installed when I started the rooting process. My drivers would recognize the Kindle when it was booted normally but when it went into fastboot mode the Kindle would just show as "Unknown Device" in device manager. In windows you can't remove the drivers for unknown device so I had no way of backing out the old drivers.
What I ended up doing was grabbing my other laptop and making sure I had the correct drivers installed, then connected the kindle and was able to back it out of fastboot mode.
---------- Post added at 09:05 AM ---------- Previous post was at 09:04 AM ----------
umarsl said:
Man, My Kindle Fire does not even get detected by my PC
Click to expand...
Click to collapse
Does it show up as "unknown Device" in device manager?

you can uninstall the drivers
win 7:
http://www.petri.co.il/removing-old-drivers-from-vista-and-windows7.htm
xp:
http://www.techrepublic.com/article/removing-unused-device-drivers-from-windows-xp-machines/6017628

Just wanted to say thanx for the post. I ran into the exact same condition that the op did where I inadvertently screwed up the permissions on the /system/app directory which caused the kf to wig out and brick. I wished I had seen your post earlier because I ended up going to many posts and piecing together the information which was a little confusing at times. The op is great and I just wanted to point out two observations that seemed to me the most confusing working through the issue and getting it unbricked and hopefully will bring some clarity for folks.
1. Understanding the different states of the "kindle fire" logo.
- Shimmering animation and appears to loop = normal boot mode and is the state that you should be able to communicate with adb. This is the state where you can push files to the kf like twrp and fbmode which is what is needed to get kf in fastboot mode when bricked like this.
- The logo is static and does not "wink" out or loop = fastboot mode. This is when you use fastboot commands on your PC to change boot modes and also execute files such as twrp to get it installed once you pushed it to the kf with adb.
2. USB Drivers.
- This can be a real killer. After playing with this for hours, the one thing that I found that helped the most was when the driver stopped working I would unplug the kf from the PC and then hard reboot the kf (hold on/off ~20 seconds) then just plug back in, don't use on/off. Keep the device manager open on the PC and watch. You will soon start to see a pattern when you have the right driver and do this a few times.
Once these things are ironed out all eventually works out. BTW, this occurred after my kf was upgraded to 6.2.2. So the instructions and tools and everything else you will find still works. Good luck to anyone working through this issue. Just remember, if you can communicate with it, it's almost certain there is a way to recover it.

Can't go into recovery...

I'm pretty new at this and I'm having issues going into TWRP.
Whenever I try to install TWRP recovery using the KFU, It looks like it's going through the process, and I do end up seeing the teamwin logo popup and the device boots into the regular kindle interface (so it at least appears that TWRP was installed). The problem is whenever I try to go into recovery using the bootmode menu in KFU, the kindle will reboot, only it won't go into recovery and just goes back to the regular kindle interface. I'm not quite sure what I'm doing wrong. One thing I did notice from looking through tutorials, is that when you reboot the device it's suppose to go to a yellow triangle screen before going into TWRP. My kindle never does this. I don't ever see that yellow triangle screen and instead see the regular kindle fire logo before it loads the regular interface. One other thing is whenever i use the KFU, under "adb rooted:" it says no. I thought after I did the "Permanent Root with Superuser" that it was supposed to say yes. Anyways, any help would be much appreciated.

the yellow triangle is the bootloader (firefirefire) which you'r missing i think
i would take the newest KFU 0.9.2 (attention re-upped yesterday-redownload):
http://forum.xda-developers.com/showthread.php?t=1399889
reading the op (espacially the known tricks) is a good idea
i recommend to extract kfu to c:\ and rename "kindle fire utility" to "kfu" because it don't allways like the blanks in the path
if you are on windows7 you should run kfu and all other commands from an elevated command shell (as administator)
to install the correct drivers (espacially on win7/64bit) by running install_drivers.bat is also a good idea
now you are ready to use kfu and install twrp again
that's the easy way
if it don't work you can install fff (firefirefire - the yellow triangle) manually
ask again about this ...

Thanks for the reply - just got home and I'll try your suggestions.

I'm having the same problem as the OP here.
I originally rooted using BurritoRoot, which worked just fine.
When using KFU, option 5, it seems to run everything smoothly, the downloads are the correct size... But when it goes and starts rebooting at the "DON'T TOUCH ANYTHING! DON'T EVEN LOOK AT IT! OR ELSE!"* screen on KFU, my Kindle boots into the standard Kindle Boot Animation, then the TeamWin splash pops up for a moment.
It then reboots back to the regular Kindle Fire boot animation and KFU says "There we go. TWRP is installed. Ter-dah!"*
When I go to restart the Kindle, however, I never get the FireFireFire icon at all. Just straight into the normal KindleFire stuff.
I decided to take a look at my device manager while my Fire is plugged in. It's listed under "Android Phone > Android Composite ADB Interface"
Perhaps this is the drivers for my Android Phone interfering with the drivers for the Kindle? Iunno. I'm pretty lost on this one.
(* Paraphrased, in my own words, of course)

the driver is the you stated is the right one for kf in normal bootmode
would retry the installation with kfu and watch the output carefully
maybe copy and paste the output for later analysis
seems to be a common problem at the time:
http://forum.xda-developers.com/showpost.php?p=21316424&postcount=49

How about just download the older KU 0.9.1 that's known to work everytime. 0.9.2 had issues installing TWRP.
Once you installed it using KFU 0.9.1, you will have no proiblems getting to your TWRP recovery.

Using the 0.9.1 version did it for me. Thanks a bundle.
Now I'm drooling over ICS on the Kindle Fire. Can't wait for a stable build! +_+

Just follow this guide:
http://rootkindlefire.com/kindle-fire-root/kindle-fire-root-new6-2-1windowsmaclinux/
Sent from my Kindle Fire using xda premium

[Q] Silly me, bricked my kindle fire after TWRP seemed to fail.

So, as many new KF rooters have, I seem to have bricked my KF. I rooted it just fine, but when installed TWRP through KFU .93 the process seems to have stopped. After waiting over an hour and reading countless "I've been stuck installing TWRP through KFU .93" threads, and seeing many "I switched to .91 and it worked fine" responses, I decided to give that a shot. After unplugging and hard resetting my KF, it is still stuck on the KF logo screen. No yellow box, just the logo screen.
When I plug the KF into my computer, the device is recognized and the proper KF drivers are installed, but I can't get adb to work at all. Every attempt returns a "Device not found" or a "Server didn't ACK." The device does not show up on my list of attached devices, but in Device Manager it is loaded.
I'm unsure of what the next step should be, as I can't get the hardware to respond to anything but resets, and I can't get the software to communicate with the hardware from my PC. I really don't want to admit defeat and contact Amazon.
*edit* Through more research I've made some progress. Opening KFU and selecting the bootmode option, and then when it says "waiting for device" hard resetting the KF and letting KFU change the bootmode to Recovery has done some things. I got a message saying "Failed ..." but it flashed too fast for me to read. Then, upon several restarts, I received a message saying that the KF needed to factory reset, which it is doing now.
As of right now I have a Factory Resetted, working KF. My updated question is now "Where did I go wrong?"
I assume it had to do with TWRP, as it was working until then. Should I redo the whole process using KFU .91 instead of .93? The root went of without a hitch, but the TWRP was what killed me.
Also, do I do Root THEN TWRP, or TWRP THEN Root? I guess I might need Root access to install a Recovery console, but I'm unsure.

use KFU to root, then hit up my gscript install method in the development thread. easy peasy.
but for the record, you were in fastboot, so it won't see adb commands..
fastboot -i 0x1949 oem idme bootmode 4000 maybe woulda saved you. but avoid fast boot entirely, n use my gscript method.

heres how i did it
I was trying to unbridled my kindle fire all last night and about 5hours today.here is how I did it (don't get your hopes up too high,it might not work)
1.Download kindle fire utility
2.Unzip kindle fire utility
3.To install the driver,its easy,just plug in your kindle, when it pops up with the install wizard say pick from the location of: KindleFireUtility>drivers>kindle
4.run kindle fire utility,select 1 then select 1 again
That's it, hope it helps

KF stuck in TWRP 2.0 boot loop

Hello all,
I realize that I am a noob. I realize you can see the "posts=1". I realize that you guys have probably seen the above title a million times before. Honestly though, I feel like I'm at end. I've scoured Google & xda-dev for 5+ hours now and I can't find a single answer that works. So here's my "special" problem:
Info: Windows 7 Home Premium 32-bit
Kindle Fire (previously) temp rooted with BurritoRoot. Installed TWRP 2.0, firefirefire, google-framework.apk, and the rest of the lot, then de-rooted.
Yesterday, I realized that the Music tab on my KF was crashing. I was literally unable to look at my music. About half an hour later, I was unable to read books as well. Thinking about it now, I'm pretty sure that it was because I had forgotten to uncheck "update automatically" for the stock kindle apps in the Android Market/Play Store, making it unusable in the stock Kindle OS. Oh well, at least the source of the problems was found.
Of course, being the happy little idiot I am, I thought I should just restore the firmware via stock OS. I could just re-root and reinstall all of my apps, right? Huge mistake. After buzzing around for thirty seconds, Kindle rebooted. Instead of launching into the stock OS for initial config though, it dropped itself into TWRP 2.0 without me even pressing the power button. TWRP, of course, kindly informs me that the entire device is blank.
I fretted for a little bit, then connected my Kindle to my computer. I already have the adb drivers installed, but Windows shows it as Unknown Device.. It also helpfully insists that it has malfunctioned and tells me to buy a new one.
I turned to Vashypoo's KFU. A bunch of threads said it was stuck in fastboot and KFU could could put it back into regular (4000) boot. However, KFU's bootmode menu is unable to find the device, which is in the TWRP menu.
I tried using command prompt to gain access.
Code:
adb shell
then
Code:
fastboot -i 0x1949 idme bootmode 4000
gives me "/sbin/sh: fastboot not found" which is really scaring me.
Back to KFU, I tried reinstalling stock firmware from there. It apparently installed fine (how?). I doubt that it did, but TWRP is showing some signs of an OS in the device (not sure if its the full OS or not). Bootmode 1 now giving me no response (!)
Since all I really need is access to the SD storage to upload the OS, I tried to reinstall the drivers. Windows implores that its "Unknown Device" driver is the correct one. Trying to choose the "Android Phone" driver sens me back to "Unknown Device" for some reason.
I went back to basics. Used the mount function in TWRP to mount USB storage. AS you can probably guess, absolutely no response from PC.
Dearest XDA-devs i reach out to you. I'm at end. I don't know what else to do. If any of you can help me, I'll be grateful. While I'm not a complete noob (know my way around computer root, experienced jailbreaker/rooter, know basic command line) I'm utterly lost at what to do know. At the risk of sounding like a pretentious prude, I'll make a list of accomplishments to help anyone else who happens to have strangely fallen down the same path I have. As always, if you ever need more details, just ask.
nxtfari​
-----------------------------------------------------------------------------
[X] Reason for stock app crashes (Play Store auto-updated stock Kindle apps)
[X] Reason for boot loop (I'm an idiot/Restore via stock OS)

If you can able to get to adb shell, you won't be able to run fastboot commands from there. Fastboot commands can only be issued to the KF when the KF is in fastboot mode... adb commands can only be issued when the KF is in recovery or booted to the OS. Also, the fastboot command is on your computer (probably in the same directory as adb). If you are in adb shell, it's going to run executables stored on your KF, so you are essentially looking in the wrong place for fastboot. That's why it's telling you that the command can't be found.
If you can get into adb shell while booted into TWRP, you should just be able to just run 'idme bootmode 4000' to get the bootmode back to normal and reboot. Hopefully, your system is intact and is able to boot up. Otherwise, you need to get back to TWRP and you can probably just 'adb push' the stock software onto your /sdcard partiton and use TWRP to install it.

Thank you so much
Thank you so much,
i have the same problem, and with this on a cmd:
#adb shell
#idme bootmode 4000
#reboot
now I have again a kindle fire ^_^
Thanks again

nxtfari said:
Hello all,
I realize that I am a noob. I realize you can see the "posts=1". I realize that you guys have probably seen the above title a million times before.
Click to expand...
Click to collapse
I think I speak for most of the people here when I say, your valid attempt at thoroughly explaining your problem, how you arrived at your problem, and the steps you took to resolve your problem is greatly appreciated and goes a LONG way towards getting the help you need in a timely and orderly fashion.
If everyone addressed their problems this way, our forums wouldn't be constantly inundated with threads that require twenty replies to fix a simple problem when it should only take a couple at best.
Wishful thinking
Sent from my Amazon Kindle Fire using xda premium