I have had windows dev preview since it came out, but after many bugs, i decided to revert back to windows 7. I just did a fresh reinstall, and my internet won't work hardwired. I have tried a lot of solutions, but still no luck. Does anyone have any suggestions?
FadedLite said:
I have had windows dev preview since it came out, but after many bugs, i decided to revert back to windows 7. I just did a fresh reinstall, and my internet won't work hardwired. I have tried a lot of solutions, but still no luck. Does anyone have any suggestions?
Click to expand...
Click to collapse
you have tried to update your driver???
Related
See thread title.
Does somebody has an idea. I can use the help.
Normal win7 installation. Updated with latest marvell wifi drivers, however rolling back to old drivers or reinstalling shagcontrol do not work. anyone ?
Never mind ... sigh.
Strangely cygwin wouldn't install too.
So I reinstalled win 7. Now, I immediately installed cygwin with hsect2: just in case shagctrl won't work again.
Shame is I couldn't find the cause of my problem.
Hey all, been poking around the forums and trying out various WM and Android ROMS and they all seem to work beautifully, kudos to the devs.
I seem to be running into a bit of a problem though.
My phone is an MP6900 (Vogue 100) from Bell. And while the roms work great, the second my phone goes into standby mode (when not attached to my comp) the phone resets.
I have tried four different roms, two android and two WM and the problem persists.
Also hard resets, battery removal etc etc to no avail.
I also tried to roll back the radio as that got updated when I went to my stock rom previously.
And to boot I can't seem to flash back to the stock ROM anymore, while I was able to even just yesterday. I get Error 262, for whatever reason.
I was wondering if anyone else has run into this issue and could point me in the right direction.
And I did a search on the forum (pre-registration) but couldn't find anything, sorry if this has been brought up before.
Again, great work on all of the ROMs! I had no idea phones had come this far. (Sad to say but true lol)
JustinHTC said:
Hey all, been poking around the forums and trying out various WM and Android ROMS and they all seem to work beautifully, kudos to the devs.
I seem to be running into a bit of a problem though.
My phone is an MP6900 (Vogue 100) from Bell. And while the roms work great, the second my phone goes into standby mode (when not attached to my comp) the phone resets.
I have tried four different roms, two android and two WM and the problem persists.
Also hard resets, battery removal etc etc to no avail.
I also tried to roll back the radio as that got updated when I went to my stock rom previously.
And to boot I can't seem to flash back to the stock ROM anymore, while I was able to even just yesterday. I get Error 262, for whatever reason.
I was wondering if anyone else has run into this issue and could point me in the right direction.
And I did a search on the forum (pre-registration) but couldn't find anything, sorry if this has been brought up before.
Again, great work on all of the ROMs! I had no idea phones had come this far. (Sad to say but true lol)
Click to expand...
Click to collapse
Sounds like a dying battery to me.
It worked fine in the original Windows though so that's why I am a bit baffled.
what happens if you put your device in bootloader and try to flash to stock? Error 262 is a connection error. basically happens whenever some event interrupts the flashing process (a dead battery will cause this). If you haven't yet, try to flash to stock via the method in this post (bootloader and then flash)
Tried that, didn't work. Just gets to 31% and pops 262 no matter how I try to do it.
The odd thing is though that I can flash any other ROM just fine.
Would reformatting the SD card work?
Figured it out. I used the 0.41 ROM to unlock the phone which was causing the issues. I reflashed with the 2.3.1 and everything works fine.
JustinHTC said:
Figured it out. I used the 0.41 ROM to unlock the phone which was causing the issues. I reflashed with the 2.3.1 and everything works fine.
Click to expand...
Click to collapse
0.41 was reportedly having tons of issues, you should have started from there
Glad you got it working.
Hi
Sorry if this has been cleared up in another thread, but I cannot find the answer to this problem.
I am running Gingerbread 2.3 (Cynogen) on my phone via the file manager method. Everything was fine until one day after I booted back into Android after a normal soft reset - The keyboard would keep hitting "Q" no matter what I pressed. I could not open The browser as I would get an error message.
I thought maybe it was the extended battery I was using, so I reformatted my sd card, re booted gingerbread and everything was back to normal.
Then last week it happened again. I dont remember installing anything new. It is also not the build Im sure, because this did happen a while ago on another Cynogen mod I used.
I am pulling my hair out wondering what to do. There is no point in reinstalling it because it will happen at a seemingly random time again.
Does anyone have any clue or suggestions on how to fix this??
Thanks
Frosty1148 said:
Hi
Sorry if this has been cleared up in another thread, but I cannot find the answer to this problem.
I am running Gingerbread 2.3 (Cynogen) on my phone via the file manager method. Everything was fine until one day after I booted back into Android after a normal soft reset - The keyboard would keep hitting "Q" no matter what I pressed. I could not open The browser as I would get an error message.
I thought maybe it was the extended battery I was using, so I reformatted my sd card, re booted gingerbread and everything was back to normal.
Then last week it happened again. I dont remember installing anything new. It is also not the build Im sure, because this did happen a while ago on another Cynogen mod I used.
I am pulling my hair out wondering what to do. There is no point in reinstalling it because it will happen at a seemingly random time again.
Does anyone have any clue or suggestions on how to fix this??
Thanks
Click to expand...
Click to collapse
Maybe it's a bug in the ROM
Try different rom and see if this problem still persists, if yes, maybe a hardware problem related issue
Cheers
There are a few roms with 100% support for the official extended batteries(s). Your best bet is to go with one of them.
Sent from my HD2 using XDA App
Wondering if anyone else is having this issue as well but haven't been able to find anyone. I just got windows 10 TP on my Lumia 1520 on AT&T. I can't send mms and I can't add APN in Windows 10 TP because it doesn't support that yet. I tried rolling back to 8.1 several times and updating back to 10 including several clean installs and nothing worked. I even tried manually adding the APN in 8.1 hoping it would carry over after th update but no success. Anyone else experiencing this and have suggestions or a fix? I went back to 8.1 in the meantime but will try out any good suggestions.
Hey guys. I just recently updated to Android 7 via the resurrection ROM. I have flashed 2 different rooms and this problem still persists. I have done absolute full wipes in between and I have also tried flashing other kernels. This only started as a problem when I went from 6 to 7. Any ideas?
SiqMawsh said:
Hey guys. I just recently updated to Android 7 via the resurrection ROM. I have flashed 2 different rooms and this problem still persists. I have done absolute full wipes in between and I have also tried flashing other kernels. This only started as a problem when I went from 6 to 7. Any ideas?
Click to expand...
Click to collapse
Try different GApps packages.
Gapps solution didn't work. I tried all the way back to Feb gapps packages. I can't get any 7.0 Roms to work without crashing when location is requested. I am back to 6.0 and working fine. What could the issue be? I might try to go fully back to stock then back again.
I'm also having the same problem. I've tried both Resurrection and Lineage.
OP - did you find any solution?
I was having problems with Google Play Services, related to location, and I did type this command on the terminal:
pm grant com.google.android.gms android.permission.ACCESS_FINE_LOCATION
See if it works.
Sorry bad english
I've tried Lineage, AOKP, AICP, AOSCP, RR; Delta Gapps, Open Gapps. This problem won't go away.
As far as I can tell there aren't any MM ROMs still being updated? At least the threads are all dead. Really at this point I'm debating going back to stock and waiting for Moto to give me something. Maybe the same bug is what's tripping them up.
purplegreendave said:
I've tried Lineage, AOKP, AICP, AOSCP, RR; Delta Gapps, Open Gapps. This problem won't go away.
As far as I can tell there aren't any MM ROMs still being updated? At least the threads are all dead. Really at this point I'm debating going back to stock and waiting for Moto to give me something. Maybe the same bug is what's tripping them up.
Click to expand...
Click to collapse
Did you try the command, mate? I don't know if someone did try it, and I want to know if it works, because it did work for me
smsporto said:
Did you try the command, mate? I don't know if someone did try it, and I want to know if it works, because it did work for me
Click to expand...
Click to collapse
Just got several messages telling me the action wasn't allowed, even with root
purplegreendave said:
Just got several messages telling me the action wasn't allowed, even with root
Click to expand...
Click to collapse
I tried the command it didn't work for me. The command itself went ok without errors, but it did not fix the rebooting issue. The only solution for me is to put GPS onto battery saver mode, which is not ideal.