Whe I try to install CM7, I installed recovery successful by change boot mode to "idme bootmode 0x5001", maybe I made some mastake when I copy log file, I can't update to CM7, now it's always come into recovery mode when I restart KF, I don't know how to exit recovery mode.
How can I change to normal mode? Thank you!
Is there any method to exit recovery mode?
yuhao51000 said:
Is there any method to exit recovery mode?
Click to expand...
Click to collapse
try:
fastboot oem idme bootmode 4000
fastboot reboot
That command will put it back to OS boot mode, not recovery mode. That worked for me when I flashed TWRP today.
If your stuck in clockwork, adb should work and you can type
adb shell
su
idme bootmode 4000
exit
exit
adb reboot
fastboot commands won't work while your in recovery, only while your in fastboot.
It works, now I installed CM7 successful, great thanks!
could this work on another device like the tf700?
Related
Hi Guys! I need your Help!
My Kindle fire is stuck on the booting logo, it looks a bit sharper and brighter than usual.
I was running a perfect running stock 6.2.2 firmware with root access.
Those are the steps i did:
went to http://forum.xda-developers.com/showthread.php?t=1410223 and did:
Code:
To install the CWR recovery by DoomLord after gaining root:
Download it, and push it to your Kindle
adb push <filename> /data/local/recovery.img
adb shell dd if=/data/local/recovery.img of=/dev/block/platform/mmci-omap-hs.1/by-name/recovery
Reboot normaly with no boot manager, so:
Did the first part of the thread BurritoRoot3 and tried to perform the "To install the CWR recovery by DoomLord after gaining root:" procedure.
Again it did boot normal.
Went to http://forum.xda-developers.com/showthread.php?t=1414832 and did:
Code:
adb push fbmode /data/local/tmp
adb shell chmod 755 /data/local/tmp/fbmode
adb shell /data/local/tmp/fbmode
adb reboot
it went good, i did reboot the device and now its stuck with kindle fire logo and no adb connection
Any advice please Next i will try this http://forum.xda-developers.com/showthread.php?t=1430038
Hopefully someone can assist.
I was at the same place, stock rom, 6.2.2 with root access via burritoroot2. To add TWRP I used KFU edited to support burritoroot2.
Haha puh, i think i fixed it.
this thread help.
http://forum.xda-developers.com/showthread.php?t=1407254&page=2
You have to look at the kindle fire logo. when its static. you are in fastboot mode.
to boot normal you can just do:
Code:
fastboot -i 0x1949 oem idme bootmode 4000
fastboot -i 0x1949 reboot
This should work with 4002 as parameter to re enable fastboot mode.
Soo. question solved
But has anybody an idea how to get to CMW installed in fastboot mode?
//ps. i added vendor id (0x18d1) to adb_usb.ini on windows 7
it is described at the op of cwm under [how to test]:
http://forum.xda-developers.com/showthread.php?t=1454241
Did that process b63 link mentions last night without issue on a KF that has TWRP.
miro101 said:
Haha puh, i think i fixed it.
this thread help.
http://forum.xda-developers.com/showthread.php?t=1407254&page=2
You have to look at the kindle fire logo. when its static. you are in fastboot mode.
to boot normal you can just do:
Code:
fastboot -i 0x1949 oem idme bootmode 4000
fastboot -i 0x1949 reboot
This should work with 4002 as parameter to re enable fastboot mode.
Soo. question solved
But has anybody an idea how to get to CMW installed in fastboot mode?
//ps. i added vendor id (0x18d1) to adb_usb.ini on windows 7
Click to expand...
Click to collapse
put cwm in ur fastboot folder
fastboot flash recovery cwm.img
u might needto do fastboot -I 0x1949 flash recovery
make sure u have firefirefire already installed, or flash that at the same time. fastboot flash bootloader u-boot.bin
Sent from my HTC Glacier using xda premium
Not quite sure what i did 0_o. I used the kindle fire utility to install permanent root. It rebooted and allwas well. Then i used the program to tell it to boot into fastboot mode. when I did this now it just loops between the Triangle and TWRP. Im guessing not screwed...i just dont know what to do next to fix it lol. I tried the brick fixer program. it just reboots the kindle fire and then it does the same thing over and over.
Try hooting into TWRP and telling it to reboot in normal mode.. using KFU of course lol.
I'm in the same boat...however, I figured out how to get it to stop and stay at the Triangle (fastboot mode)
I typed "fastboot -i 0x1949 getvar product" into the Command Prompt Window on my computer. It then said <waiting for device>
I forced the Kindle off with the 20-sec press, then unplugged and re-plugged it into the computer.
Now I just have to figure out how to get the fastboot mode to give me access to the USB, or to get ADB working on this sucker. I'm trying to get a ROM over to the Kindle's internal memory so I can save it's life!
Hopefully this will give you a launching place, too. Oh, and using the Kindle Fire Utility will then work as long as it's in the triangle screen, but every step I've used with it so far just puts me back into the FireFireFire / TWRP loop.
Hey guys thanks for the response. shortly after I posted this I went into the kindlefire irc channel and they helped me out. somehow the stock rom i was on corrupted itself and even when i did
adb shell
su
idme bootmode 4000
reboot
It still wasnt fixed. So the solution was to flash that modaco rom thats here and then run the adb command again. Viola. Working Kindle Fire . Now if i can just figure out how to make the stupid wallpapers stop auto cycling lol.
New_Guy777 said:
I'm in the same boat...however, I figured out how to get it to stop and stay at the Triangle (fastboot mode)
I typed "fastboot -i 0x1949 getvar product" into the Command Prompt Window on my computer. It then said <waiting for device>
I forced the Kindle off with the 20-sec press, then unplugged and re-plugged it into the computer.
Now I just have to figure out how to get the fastboot mode to give me access to the USB, or to get ADB working on this sucker. I'm trying to get a ROM over to the Kindle's internal memory so I can save it's life!
Hopefully this will give you a launching place, too. Oh, and using the Kindle Fire Utility will then work as long as it's in the triangle screen, but every step I've used with it so far just puts me back into the FireFireFire / TWRP loop.
Click to expand...
Click to collapse
would try to boot to twrp, tap the mount button and mount sdcard
now you should be able to copy a rom to sdcard and install it
to force it to boot to recovery issue: "fastboot -i 0x1949 oem idme bootmode 5001" and "fastboot -i 0x1949 reboot"
if it says <waiting for device> just cold restart the kf - the command should be picked up and finished
don't forget to switch back to normal boot after installation: "adb shell idme bootmode 4000" and "adb reboot"
maybe this could also help you:
driver (under android phone):
normal & recovery boot: -> android composite adb interface
fastboot: -> android adb interface
here all the possible commands to change bootmode:
with adb (secure kernel):
adb shell su -c "idme bootmode 4000"
adb reboot
or (twrp or unsecure kernel):
adb shell idme bootmode 4000
adb reboot
with fastboot:
fastboot -i 0x1949 oem idme bootmode 4000
fastboot -i 0x1949 reboot
or:
fastboot -i 0x18d1 oem idme bootmode 4000
fastboot -i 0x18d1 reboot
or:
fastboot oem idme bootmode 4000
fastboot reboot
the number is the bootmode you want to switch to:
normal boot -> 4000
fastboot -> 4002
boot to recovery -> 5001
and if you know:
normal boot -> adb commands YES -> fastboot commands NO
fastboot -> adb commands NO -> fastboot commands YES
recovery -> adb commands YES -> fastboot commands NO
then you only have to count 1 and 1 together and can master nearly each hanging situation !
Click to expand...
Click to collapse
It is stuck at the picture of yellow fire icon, with a phase press power button for recovery at the bottom...... but no matter how many times i press the power button, it does not respond..............helphelphelp.....
Try holding the power button for about 20 seconds, that should reset it. You can also try this: http://forum.xda-developers.com/showthread.php?t=1356257
Did you install a recovery yet? if so, try spam pressing the power button to get into it. From there you should be able to mount usb and install a rom
The kindle fire has several boot modes, one being a fastboot mode where it will stay at the bootloader until fastboot issues a command to change the boot mode. The command would be...
fastboot oem idme bootmode 4000 && fastboot reboot
not trying to be an ass but i wish people would learn some of the basics before jumping in head first into things they don't really understand then posting basic questions in the development section of forums
But my PC now cannot recognize my fire which is recognized as unknown device. Every time I tried to use adb shell, it said device is not found.....oh my god.....
And I have tried to hold the power button for more than 20s but it doesn't seem work.....
In fact I have installed TWRP once. However, when I am accidentally installing the TWRP twice, the fire is then stuck at the yellow triangle "FIRE" logo...and with a phase press power button for recovery at the bottom.
OH MY GOD....the Fire is my mum's ..... she is going to kill me
I didn't say anything about adb shell
foxdog66 said:
I didn't say anything about adb shell
Click to expand...
Click to collapse
not using adb shell??!! then how can I use the command????
You might also need to use the -i switch. So the command would look something like...
fastboot -I 0x1949 oem idme bootmode 4000
not to be "that guy" but this is in the wrong section. it should go in general.
--sent from my glacier.
I had the same problem ... my computer recognized my fire for 20 sec and BAM! everything just got frozen... just triangle for ever... then I connected to computer ... I had the TWPR installer already open... and before freezing I tried to re install the recovery mod and it worked!
some basics:
driver (under android phone):
normal & recovery boot: -> android composite adb interface
fastboot: -> android adb interface
here all the possible commands to change bootmode:
with adb (secure kernel):
adb shell su -c "idme bootmode 4000"
adb reboot
or (twrp or unsecure kernel):
adb shell idme bootmode 4000
adb reboot
with fastboot:
fastboot -i 0x1949 oem idme bootmode 4000
fastboot -i 0x1949 reboot
or:
fastboot -i 0x18d1 oem idme bootmode 4000
fastboot -i 0x18d1 reboot
or:
fastboot oem idme bootmode 4000
fastboot reboot
the number is the bootmode you want to switch to:
normal boot -> 4000
fastboot -> 4002
boot to recovery -> 5001
and if you know:
normal boot -> adb commands YES -> fastboot commands NO
fastboot -> adb commands NO -> fastboot commands YES
recovery -> adb commands YES -> fastboot commands NO
then you only have to count 1 and 1 together and can master nearly each hanging situation !
Click to expand...
Click to collapse
b63 said:
some basics:
Click to expand...
Click to collapse
MY fire relights its fire!!!!! so many thanks!!!!!!!!!!!
glad to help ...
please mark the subject of the topic (edit first post) with [Solved]
I solved it! it very easy:
1- plug your device to your PC while it is on fire icon
2- open "Kindle Fire Utility" and then press 5
3- done!
I was so scared that I had lost my kindle. I write this for others so hopefully will be helpful for them.
alright fellas, I had cm7 and twrp installed..everything was just DANDY and then i followed these steps to upgrade to miui ics build:
"...Step 3: Once transfer is complete, shut down your Kindle Fire.
Step 4: Boot into a custom recovery. ClockworkMod Recovery and TWRP are popular choices and you can choose to install whichever you like.
Step 5: Take a NANDROID backup. This may come handy later on if you have problems with MIUI and wish to revert back to current setup.
Step 6: Do a complete wipe & factory reset from the custom recovery.
Warning: This will delete all your personal data.
Step 7: Flash the ROM you transferred to your Kindle in Step 1. In CWM, you can do this from install zip from sdcard > choose zip from sdcard > [.zip file from Step 1]
Step 8: Wipe both cache and Dalvik cache.
Step 9: Reboot!"
after that Im stuck at the recovery yellow triangle, so i installed the kindle driver thats out there(shows up as android adb device after install) and now after driver install i boot the kf, it recognizes device, then disappears, then shows up, then is gone again. I cant push anything to the KF if it doesnt show up...i cant even quickly push something to it while its in device manager. Suggestions?
You need to use kfu to change boot mode to normal boot.
Or issue the following adb commands:
fastboot -i 0x1949 oem idme bootmode 4000
or
fastboot oem idme bootmode 4000
then fastboot reboot
Sent from my Amazon Kindle Fire using Tapatalk
ammubarak said:
You need to use kfu to change boot mode to normal boot.
Or issue the following adb commands:
fastboot -i 0x1949 oem idme bootmode 4000
or
fastboot oem idme bootmode 4000
then fastboot reboot
Sent from my Amazon Kindle Fire using Tapatalk
Click to expand...
Click to collapse
i'm able to issue the command, reboot the fire and both commands work. However im still stuck at the yellow triangle
i'm able to issue the commands and it reboots. However im right back to recovery triangle
i'm able to issue the commands and it reboots. However im right back to recovery triangle
this worked
"- open a (elevated) command prompt and cd to c:\kfu\tools - leave it open all the time
- issue "fastboot -i 0x1949 oem idme bootmode 4002"
- it says <waiting for device>
- power off the kf by holding pwr ~20sec and power on again
- the kf is in fastboot now
- install twrp -> "fastboot -i 0x1949 boot twrp-blaze-2.0.0RC0.img"
- tap reboot on the kf screen
- update fff -> "fastboot -i 0x1949 flash bootloader u-boot.bin"
- reboot -> "fastboot reboot"
- restore to factory partitioning -> "fastboot oem format"
- boot to twrp -> "fastboot -i 0x1949 oem idme bootmode 5001"
- reboot -> "fastboot reboot"
- now the kf boots to twrp and adb commands are available
- test with "adb devices"
- open shell -> "adb shell"
- issue "echo /dev/block/mmcblk0p12 > /sys/devices/platform/usb_mass_storage/lun0/file"
- now the sdcard should mount to the computer
- windows will probably respond that the volume/device needs formatted before using it
- choose quick format and let it format it as fat32 block size 4096
- now you can download and copy your new rom to sdcard (ie prerooted stock)
- mount sdcard -> "mount /sdcard"
- exit adb shell -> "exit"
- tap install in twrp and install the new rom
- ignore errors about volume "misc" - the kf don't have a volume "misc"
- on the screen where you return after installation tap clear dalvik/cache
- set boot mode to normal -> "adb shell idme bootmode 4000"
- reboot -> "adb reboot""
http://forum.xda-developers.com/showpost.php?p=22433402&postcount=4
I just did a restore setting in the CM7 option after that I cannot boot into the CM7 but only the TWRP...
Can anyone tell me how to reinstall the TWRP...
I tried to use the kindle fire utility to re-install it, however it doesn't connect...
always shows offline..
please help
thanks
Did you restore bootloader, recovery and system from your backup using TWRP? If so you should have TWRP installed.
Please provide detail info what you have done to give further help.
You may need to update your USB diver to get adb working and to be able to install recovery software.
Sent from my Amazon Kindle Fire using Tapatalk
i think you said boot to recovery in cm7 - now you'r in a recovery bootloop - means it boots allways to recovery by itself - right ?
if so (if it is booted to twrp) use kfu option1 - bootmode normal
or issue manually:
adb shell idme bootmode 4000
adb reboot
an other method is to use fastboot commands:
fastboot oem idme bootmode 4000
fastboot reboot
in the case it says <waiting for device> power it off by holding the pwr button for ~20sec till it turns of - pwr on again - the command should resume and finish
a second pwr off/on will bring you back to normal
if commands don't work check your drivers:
http://forum.xda-developers.com/showpost.php?p=22342376&postcount=6
Can anyone tell me what the befits are to running cm7 vs a lunched like adw ion the fire?