Xoom rooted and running Hammerhead 2.1 but 3G not working? - Xoom General

Ok so basically Im aussie and have an Optus 3G + Wifi Motorola Xoom which I decided to root which then cause loss of wifi and 3G... after I flashed Tiamats Hammerhead 2.1 rom over My wifi worked properly and still no 3G
I have tried a few kernels from tiamat and tried other roms without any luck...
The build shows as HTJ85B-Deodexed v1.0
Kernel shows as [email protected] #1
Android 3.2
Model is MZ601
Oddly enough when i remove or insert my sim card i get no reply or no sign it recognizes it even though the sim works fine in other phones/tablets...
in the settings section, in wireless & networks the only settings I have are:
airplane mode
Wi-Fi
Wi-Fi Settings
Bluetooth
Bluetooth Settings
Tethering & portable hotspot
VPN settings
I just want to be able to run some custom roms or a custom rom rooted with my 3G and my Wifi working.... any more info you guys need and are you able to help?

Just about to try MZ601_H.6.1-38... etc etc.zip and see what happens... dunno how it will go since i believe that zip is 3.1 from motodev since the don't have the 3.2 up yet ? ill get back to you soon

Ok so tried flashing the zip... wouldn't flash, aborted it over and over, going to try the telstra version o.o >_<

Still not having any luck at all... Help please

Can I please get some help?

3G not working.
Hi aulterra,
I had the same problem and found that the device was running a bit hot. After flashing several ROMS to no avail. Contacted moto support and got in touch with a local authorised repairer. I have sent mine in for a make over.

Related

[HELP] X on top of signal bars! No service

Hi Youngers!
I got a friend's Y that doesn't have any signal or service with a working SIM. It only displays an X on top of the empty signal bars. I configured it's APN, and flashed another modem , but it's still doesn't work. Any help will be appreciated.
HolloWX said:
Hi Youngers!
I got a friend's Y that doesn't have any signal or service with a working SIM. It only displays an X on top of the empty signal bars. I configured it's APN, and flashed another modem , but it's still doesn't work. Any help will be appreciated.
Click to expand...
Click to collapse
Try some troubleshooting. Test his sim on another phone and see if it works there.
Is he on a custom rom? Creeds Rom 3.4 had a bug where you cant see the signal even though it has a signal. Can he still send messages even when signal bar is X?
Also, APN wont do anything for the signal, its only for mobile internet browsing with your carrier. Hmmm... are you talking about surfing through your carrier? or basic services like calls and texts?
glennlevi said:
Try some troubleshooting. Test his sim on another phone and see if it works there.
Is he on a custom rom? Creeds Rom 3.4 had a bug where you cant see the signal even though it has a signal. Can he still send messages even when signal bar is X?
Also, APN wont do anything for the signal, its only for mobile internet browsing with your carrier. Hmmm... are you talking about surfing through your carrier? or basic services like calls and texts?
Click to expand...
Click to collapse
Thanks for replying! It's running creed's v2. When you try to place a call it says "Mobile Network not Available". I tried his SIM card on an unlocked Atrix 4G and it made a call successfully. Texting doesn't work either. He said when he had this problem he took it to some unlock/repair shop and they failed to state what exactly was causing this.
HolloWX said:
Thanks for replying! It's running creed's v2. When you try to place a call it says "Mobile Network not Available". I tried his SIM card on an unlocked Atrix 4G and it made a call successfully. Texting doesn't work either. He said when he had this problem he took it to some unlock/repair shop and they failed to state what exactly was causing this.
Click to expand...
Click to collapse
try going to airplane mode then switch back
leodasal2 said:
try going to airplane mode then switch back
Click to expand...
Click to collapse
If all else fails, go back to stock rom or try another rom
(Though I suggest latest stock rom with merruk kernel and superuser opened)
glennlevi said:
If all else fails, go back to stock rom or try another rom
(Though I suggest latest stock rom with merruk kernel and superuser opened)
Click to expand...
Click to collapse
leodasal2 said:
try going to airplane mode then switch back
Click to expand...
Click to collapse
I flashed the ROM below, after i flashed it, booted up then i installed merruk 2.0 final. Did the airplane mode, but it still doesn't work. The APN looks fine. I really don't know what's causing this.
S5360B_UTKI3_ZTAKI3_UTKI3
Brazil
based on: S5360BUTKI3_S5360ZTAKI3_S5360BUTKI3_HOME.tar.md5
ro.build.date=Thu Sep 22 13:27:09 KST 2011
ro.build.version.release=2.3.5
Included CSCs:
ZTA only (Claro)
Included languages:
UT = en,es,pt
Your phone is network locked or something like that I guess.
Best way to get it solved is to post your query in this thread:
http://forum.xda-developers.com/showthread.php?t=1647703
Doky73 will surely help you out
I advise to flash this pack: S5360B_UTLC2_ZTOLC_UTLC1 (open Brasil)
Flash all 3 part (PDA, MODEM, CSC)
If it does not help, then send me your bml15.img.SAVE (made by Galaxy Toolbox)
hey pal i also encountered this kind of problem before after patching Creeds ROM. What i did was I reflash the rom with stock Galaxy Y via ODIN or after the first successful boot of selected customize ROM. then you will need to apply the CSC depending on what network your country has. like mine i choose either from SMA/GLB/XTE. just dial #272* IMEI code. I hope this will help.:good:

[Q] i have a question and i'm confused.. plz help me

ok here it is. i've flashed various roms but don't really know what everything is, i just followed all those insturctions but never bricked my device..
I live in China, use 3g mobile internet, my phone is korean note2(shv-e250l), use slimkat 4.4.2 nightly, bandwidth MI1, kernel thor 2.9.
i've been using these for about 1 month, and there was not any big problems, except that it feels like my signal strength or internet speed isn't as good as stock rom
but yesterday, when I hung up after calling my friend, all of sudden my phone can't read my sim card, so i reboot the device, and my mobile network doesn't work, and i reboot again, finally everything works.
after that, everytime i call someone my phone goes stupid and i have to reboot it twice.
and I started to wonder, does my bandwidth need to be updated? can I use newest stock rom's bandwidth?
newest stock rom of korean note2 is NA1, will using its bandwidth solve my problem?
if it does the magic, how do i apply bandwidth of NA1 to my phone?
HELP ME.............

[Q] xcover 2 (GT-S7710L) not getting high internet

Hi all!
1. I bought my phone (xcover 2 GT-S7710L) in the states, and when I brought it back with me to Israel, the internet doesn’t work properly. It's very slow, and shows only "G", not 3G, H or H+ like it should. Is there anything that can be done? A new modem?
2. I tried to update it do KK (from JB), and it wouldn't recognize the sim at all. Perhaps it's because I got a rom for S7710 and not S7710L (?) - do you know about a rom that supports the device? I've tried both Vanir and CM11, with no success.
Thanks! Itai
zilmsys have
Did you ever get this figured out? I'm having a similar problem with my GT-S7710L (i'm in the US) after having flashed Rom and recovery for the GT-S7710. Except I have not mobile data at all. I can still text, call, and I have wifi.
nope
alforddm said:
Did you ever get this figured out? I'm having a similar problem with my GT-S7710L (i'm in the US) after having flashed Rom and recovery for the GT-S7710. Except I have not mobile data at all. I can still text, call, and I have wifi.
Click to expand...
Click to collapse
The KK rom (for GT-S7710) i've flashed made the phone pretty useless - sim not working at all.. I manged to flash the JB stock rom, and it is back as it used to be - low speed internet, and a working sim card.

[Q] I9505. No signal when using 3G/4G. 2G works

Hi.
After updating Danvh's lolipop-rom to the latest version, I lost my signal and wifi. When I force my phone to use 2G (GSM only) in network-settings, everyting works normal.
But of cource I want the speed of 3G and 4G when using internet!
Sometimes (not often) 3G works.
Sometimes the phone says it has signal, but calls, internett etc don't work
I tried to flash the latest modem (XXUHOC6), but no luck. Have also tried modem XXUGNK4, XXUHOB8 and XXUHOB7. I tried to go back to the older version of the custom rom, but no luck
I have now downloaded the latest official stock rom from sammobile. But same problem with stock rom.
Any suggestions?
I have IMEI
Sorry, I have the same problem and I am still searching for a solution. And I have been trying everything as you and no solution. Sometimes I think is a hardware issue.
Very frustrating :S
Hope to find a solution soon.
I dont want to buy a new phone yet. There is no other phones out there that I want

G928G + Wi-Fi calling (MetroPCS) help

I got a G928G off monoprice and it seems to work fine, M update was waiting when I powered on and everything. We are switching to MetroPCS/T-Mobile but the problem is, we get 1 bar of LTE inside the house and can't make/receive calls. Wi-Fi calling would be the answer but it isn't available in the settings anywhere. I know MetroPCS offers Wi-Fi calling and through searching it appears it is available on other FWs for the GS6E+ but not the stock one for G928G. I would prefer to keep the stock FW but I'm OK w/ rooting if I can get this added. Guessing a new bootloader won't change this so I'm afraid I will need a new ROM but I would at least like it to be a stock Samsung one. Found something about "Aroma" here but not exactly sure how this works.
Can someone point me to one that will work on the G928G and includes Wi-Fi calling? (Also, any recommendations on the best process for rooting/flashing for Samsung would be appreciated - I have rooted a Note 3 in the past and some other devices but not flashed a custom ROM - is this procedure good if I find a stock ROM that supports Wi-Fi calling?

Categories

Resources