Database Users

[Q] Can you help a brother out?

I will post the long version here, mainly because I have nothing better to do.
Here is the situation. I bought a NC about 6 months ago. I rooted it using Auto Nooter. I have no idea what ROM I installed to be honest. I'm very much a novice at this. And I'm quite stupid to boot, I might add. It has worked relatively ok since then. The ROM seemed a bit buggy and I had some initial troubles with constant reboots, in addition to some basic things not working and way bogging the thing down, but in general it was ok. I haven't used it much since unless I was traveling.
Today....I was traveling. Traveling to BFE. As such, I decided to bust out my trusty NC and download a new book while I was waiting for my flight. I did so, and something went a bit haywire. It seems that somehow, without prompting, the device has restored itself to the stock B&N ROM (1.1 maybe?). Yet - the Android OS is still there. For example I can click on my task manager app in the lower left corner of the homescreen and it shows that all of my apps are running and I can even switch to them. But my homescreen is defaulted to the B&N one showing my eBooks and I can't figure out how to get my Android launcher back. I have tried to reboot and it does the Droid boot up but reverts to the same B&N home screen.
I was thinking about trying to update to a new ROM since it had been awhile and I figured there must be something better/more stable out there now - Honeycomb or whatever. I guess this is the kick in the ass that I needed.
So now here I sit in a hotel room in BFE. There are no restaurants open past 9. There are no bars. There IS a Super Wal Mart but I think I'm gonna pass on that.
I figured I would look into this. Where to start? Should I re-set this thing to stock and then just pick a new ROM and re-root? Can I do any of this without having a SD card slot in my laptop - just using a USB cable? Will I lose any eBooks that I downloaded?
I await your sage advice.

rooting actually means gaining super user access to the current android rom. B&N, i believe is Froyo, so you did not install any rom so to speak. you were probably just rooted.
I think the issue is with the launcher and not that it is back to stock. What happens when you long press on the home screen?
If you plan to do anything, you will definitely need an sd card reader.

If you autonootered, then you were running stock, but rooted. With a custom launcher replacing the stock launcher, it sounds like.
At any rate, you were probably hit with the automatic update to B&N 1.2 (which is Android 2.2, iirc.) You almost certainly aren't rooted anymore, but it may allow you to run any apps that you already had downloaded, just from the stock app launcher.
When you get an SD card reader, you can check out Manual Nootering. It's basically the same as the old Auto Nooter, but for B&N 1.2. If you change the rom entirely (install CM7) or just run a different rom from an SD card, you'll avoid having B&N overwrite your root access in the future.

Thanks for the responses. I believe that you are correct. I actually was running 1.0.0. I used auto-nooter to root the thing and had it working with a custom launcher. I don't think it updated to 1.2. In fact I know that it didn't update to 1.2. I am trying to get it to do that right now.
I would like to install a new ROM or root or do something after it updates to 1.2 so that I have access to the Android market. What is my best way to do this? Should I just root again from 1.2? Should I install this CM7?
Can you help me understand the differences? Thanks again.
I could Super Wal Mart tonight for a SD card reader if I'm feeling frisky.

I've got all kinds of problems.
I went to update to 1.2 from 1.0. I removed my SD card and erased and deregistered device. I booted it back up and it thinks it's a phone. I put the 1.2 file in the root drive via USB, as I have read over and over that the thing should recognize the 1.2 file and reboot itself. It's not working. I erased and deregistered again. same deal.
Any advice?

I'd do a full factory reset, then try the update to 1.2 again.
A couple of things about the 1.2 update -- do not unzip the update file or rename it. Just drop it as-is into the nook. And make sure to eject the nook from your computer and unplug it.

Thank you aka. I got it to take. I am now at 1.2. Now back to square 1(.2). Any help on this?
Baboontyme said:
I would like to install a new ROM or root or do something after it updates to 1.2 so that I have access to the Android market. What is my best way to do this? Should I just root again from 1.2? Should I install this CM7?
Can you help me understand the differences? Thanks again.
Click to expand...
Click to collapse

Baboontyme said:
I booted it back up and it thinks it's a phone. I put the 1.2 file in the root drive via USB, as I have read over and over that the thing should recognize the 1.2 file and reboot itself. It's not working. I erased and deregistered again. same deal.
Click to expand...
Click to collapse
ETA: lol, congratulations! I guess just skip to that link at the end.
I'd agree with akaCat that you should do a factory reset, BUT you can only do that if you still have the stock recovery utility, and it seems possible that you do not. Try to get the NC to reset by interrupting the boot 8 times. If it doesn't work, you may have installed ClockworkMod Recovery on your Nook Color in place of the stock recovery utility. You may have done so while rooting, or later from the ROM Manager app, perhaps even by accident.
Have you attempted to boot to recovery by holding down "n" while you power on the device, and continuing to hold power + n for about six seconds (1-one-thousand, 2-one-thousand, etc), then releasing both? If so, do you get a factory reset dialog (series of yes/no options) or a longer menu including items like "mounting and storage" and "flash zip from sd card?" If you get the longer menu, then that's ClockworkMod Recovery, and neither the 8-failed-boots-reset nor the automatic update are going to work.
If you do have ClockworkMod Recovery, don't do anything yet. Hopefully somewhere on the screen it tells you the version number, in the format 3.0.x.x. Just let us know that version number and power off the NC.
If you still have the stock recovery utility, then do the factory reset, boot into the stock OS, connect USB, drop the update file straight on the Nook (not in any folders), safely remove the NC from your PC, and let it sit. Hopefully it will reboot itself.
If not, the next step is probably going to involve preparing a bootable ClockworkMod SD and manually installing a CWM-compatible version of the update, or of a different ROM. This article may help you wrap your head around the different options: http://quinxy.com/guides/how-to-pick-your-nook-color-operating-system-and-install-options/
ETA: lol, congratulations! I guess just skip to that link at the end.

Thank you, Tao. I seem to be a bit stuck, though.
I'm at 1.2 stock. I was able to reformat and erase my sd card. I went to load the .gz image onto the card (for CM7, per instructions here http://forum.xda-developers.com/showthread.php?t=1000957) and I also loaded the nightly build. Then inserted card into NC and booted. Nothing.
Any idea what I'm doing wrong? Should I unzip either file?
One thing that might/might not matter....when I went to eject the SD card from my PC, I wasn't given that option so I just pulled it.
One more thing.....the instructions at the link above instruct you to "write the image to your SD card" but then go on to say "eject the SD card" and then further "insert the uSD card into your computer"
Huh?? Isn't it all on the same card? Why do I need two different cards? What am I missing?

This blog breaks down the same process a little more step-by-step, with videos: http://www.anamardoll.com/2011/04/ereader-running-cm7-firmware-on-nook.html
You can skip the long preamble down to "Ready? Let's get started."
You do need to unzip the disk image, and write it to the SD using a program like Win32DiskImager or WinImage. It's also definitely a good idea to safely eject the SD card from your PC.

Hi Tao and others. Thanks again for all of your help. I'm almost there!
I followed this Ana chick's directions and I have CM7 booting up. I am now at the stage where I am trying to boot up in recovery mode so I can get the google apps and wifi thing going. I can't get it to work! I am holding down the "n"/home button and then the power button and it keeps booting up with CM7. I've tried it probably 20 times. Any help? Thanks!

Can someone also tell me how to access the book I just purchased and was in the middle of reading? Do I have to go somewhere and re-download?

Baboontyme said:
Hi Tao and others. Thanks again for all of your help. I'm almost there!
I followed this Ana chick's directions and I have CM7 booting up. I am now at the stage where I am trying to boot up in recovery mode so I can get the google apps and wifi thing going. I can't get it to work! I am holding down the "n"/home button and then the power button and it keeps booting up with CM7. I've tried it probably 20 times. Any help? Thanks!
Click to expand...
Click to collapse
I should add that though I can get CM7 to boot, I never get "The Power of Reading". It's just kind of a flash.

That's all normal--verygreen had to make a new uboot, which no longer shows "The Power of Reading" and also flies through a recovery boot so fast you could miss it. If gapps didn't install, just make sure the .zip is still in the boot partition and keep trying. I'm pretty sure holding power > reboot > recovery boot works now from within CM7, but I would go into Settings>Accounts and try to sign in to Google before assuming it didn't install.
If the book was a B&N purchase, once you have the market working, just install the Nook app and sign into your account, and you should be able to re-d/l the book, possibly even still synced to where you left off.

Thank you so much Tao and others. Up and running with CM7. Any additional mods I should be messing with?

btw, you can also boot into recovery through rom manager, its easier.

Baboontyme said:
Thank you so much Tao and others. Up and running with CM7. Any additional mods I should be messing with?
Click to expand...
Click to collapse
You can overclock: http://forum.xda-developers.com/showthread.php?t=925451
Just make sure you grab the version for SD, and install it just like gapps, then set clock speed via CyanogenMod Settings>Performance>CPU
boxcar8028 said:
btw, you can also boot into recovery through rom manager, its easier.
Click to expand...
Click to collapse
Easier than holding power a sec, poking "Reboot," then "Reboot to Recovery?"
Really, it's about the same either way, depending how handy ROM manager is on your system.

Highly doubting anything can help me unbrick my Nook Color[SERIOUS]

I've spent about 20 hours total trying to unbrick my nook color.
It started when I was (happily) running CM7, but I wanted to have HC preview 4 to use at times, so I decided to dual boot it. I went in to dual boot it, and it had an error. So I flashed the remove dual boot zip to reset it, then I went looking for an answer. I find that it looks like my media partition somehow got corrupt, so I go into ADB to see if I can get that working. From within adb I run "adb reboot recovery", and then it never turned on. Freaking out, I searched for an answer. I got it booting into CWM on SD, and Nookie Froyo SD. I've tried all the unbricking methods, even the advanced one that requires DDing boot.img and system.img. I got into adb from recovery and found that my partition table - I had none. So I find out how to fix that, and I do. Fixed it properly infact, looked exactly like it should. So then I go and DD boot.img and system.img, remove the SD, unplug from power, and try to boot into recovery, no luck. Tried a normal boot, no luck. I've done this multiple times. I think it has something to do with the boot partition, I verified it had contained the proper files(u-boot.bin, uImage, etc.), it was marked as bootable, but it wasn't booting.
I held down the power button for 25 minutes just to confirm without a doubt it wasn't(I watched a show while waiting, unfortunately it was my figure holding it down, not tape).
Nothing I tried fixed it.
I think I may have been one of the first to "actually" brick my nook.
Any tips on what I can do to try to unbrick it? Ask me questions, have me acquire data, I don't care.
I have access to adb in recovery, and adb connected wirelessly via nookie froyo sd bootable(for some reason it won't let me use adb via usb).
I apologize if this is in the wrong section.
Also, before you go saying that this is pretty much a repost of other threads, I looked at multiple threads with people trying to fix their nook, threads with 60 pages, read all of them. No one had a problem like mine.

If you are willing to put CM7 on the internal memory, follow the instructions here: http://mrm3.net/nook-color-how-to-install-cyanogenmod-nightlies/
Make your you use the latest version of CWR (v3.2.0.1) Once you have everything working properly, reformat the card to use as storage. Better, keep it as is in case you ever have to preform a new installation and buy a new card for storage. You will need one to properly use CM7 to full advantage.

patruns said:
If you are willing to put CM7 on the internal memory, follow the instructions here: http://mrm3.net/nook-color-how-to-install-cyanogenmod-nightlies/
Make your you use the latest version of CWR (v3.2.0.1) Once you have everything working properly, reformat the card to use as storage. Better, keep it as is in case you ever have to preform a new installation and buy a new card for storage. You will need one to properly use CM7 to full advantage.
Click to expand...
Click to collapse
I was hoping doing what you said would work - but it didn't.
I follow this guide(http://mrm3.net/nook-color-how-to-blue-dot-nook-color/) to get the partitions reformatted properly then installed it.

Glad the site still was able to help you with your issue....

It didn't help. I already followed that guide. Their is one like it here.
Sent from my VM670

tannerzion said:
I was hoping doing what you said would work - but it didn't.
I follow this guide(http://mrm3.net/nook-color-how-to-blue-dot-nook-color/) to get the partitions reformatted properly then installed it.
Click to expand...
Click to collapse
That is the same site I sent you to, only a different page.....

patruns said:
That is the same site I sent you to, only a different page.....
Click to expand...
Click to collapse
No, I just didn't have to found the one on xda because there was one on that site. No need to fight.
Sent from my VM670

Since you said "trying to unbrick" then why not try to reverse back to the original state before installing/running any other ROMs

votinh said:
Since you said "trying to unbrick" then why not try to reverse back to the original state before installing/running any other ROMs
Click to expand...
Click to collapse
Tried that.
Sent from my VM670

tannerzion said:
Tried that.
Sent from my VM670
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=kOypmSCEHbc
Go to my youtube page.
Download my ROM by clicking more on my description.
Extract and burn to a SD card with WinImage or something.
Seems like you need to fix your boot partition. Hold the power button down for 15 seconds with no USB plug in the nook. Put your recovery SD in the nook and hold power for 5 seconds you should boot to the SD card. Flash the “repartition-boot_emmc-800mhz-stock.zip” if you want the 800 MHz stock kernel and reboot the nook. If you want the 1.1 GHz Kernel flashed then use “repartition-boot_emmc-1.1ghz-froyo_setboot.zip”.
Once you flash that go ahead and flash my rom just for ****s and giggles to see if you can boot into it. Enjoy. Let me know if I helped.
If this doesnt work you can always DD your way to a new partition. Example below but lets do what I put up top first.
dd if=/dev/block/mmcblk0p1 of=/sdcard/xe.nook.color-froyo-v2.2-boot.img
dd if=/dev/block/mmcblk0p6 of=/sdcard/xe.nook.color-froyo-v2.2-data.img
dd if=/dev/block/mmcblk0p5 of=/sdcard/xe.nook.color-froyo-v2.2-system.img

Well, I'm already processing a return... But if I run across this problem on my new nook, I'll try that.
Sent from my VM670

tannerzion said:
Well, I'm already processing a return... But if I run across this problem on my new nook, I'll try that.
Sent from my VM670
Click to expand...
Click to collapse
Return it and try CM7 normally installed to EMMC. Dont **** around with dual boots and all this other crap

When you get your new one in, and if you decide to put CM7 on EMMC, just leave it as CM7 alone.
Shame you sent it back before we could work it out, I was looking forward to trying to fix this - but I can imagine just how frustrated you have been with it and I don't blame you. Probably at the end of your rope and in your place, if I could have gotten B&N to exchange it, I would have too.
Because the Nook Color boots from the SD first, you can always just install whatever else you want to play with to a MicroSD card and run it that way.
Verygreens sd card prep thread is a fantastic first step in this regard. (click "SD Install" in my sig to get to it)
I personally still have my Nook Color stock on EMMC (with B&N official updates) and run my CM7 and other installs from the sdcard. Just make sure it is a SanDisk card and you'll be good to go. (also links in my sig to find out why SanDisk if you're curious)
The benefit to running from the sd-install, especially on possibly unstable ROMS, is that if it doesn't work you simply remove the card to get your device back - instead of having to run recovery on your device.
The latest stable release of CM7 is absolutely fantastic on the Nook Color, and i'd highly recommend it as your daily driver.

Blue6IX said:
When you get your new one in, and if you decide to put CM7 on EMMC, just leave it as CM7 alone.
Shame you sent it back before we could work it out, I was looking forward to trying to fix this - but I can imagine just how frustrated you have been with it and I don't blame you. Probably at the end of your rope and in your place, if I could have gotten B&N to exchange it, I would have too.
Because the Nook Color boots from the SD first, you can always just install whatever else you want to play with to a MicroSD card and run it that way.
Verygreens sd card prep thread is a fantastic first step in this regard. (click "SD Install" in my sig to get to it)
I personally still have my Nook Color stock on EMMC (with B&N official updates) and run my CM7 and other installs from the sdcard. Just make sure it is a SanDisk card and you'll be good to go. (also links in my sig to find out why SanDisk if you're curious)
The benefit to running from the sd-install, especially on possibly unstable ROMS, is that if it doesn't work you simply remove the card to get your device back - instead of having to run recovery on your device.
The latest stable release of CM7 is absolutely fantastic on the Nook Color, and i'd highly recommend it as your daily driver.
Click to expand...
Click to collapse
I wanted something on the emmc, and my microsd card is to slow to consider booting from it. I'll probably get a better one or just use my current one, and install honeycomb on that.
xboxexpert said:
Return it and try CM7 normally installed to EMMC. Dont **** around with dual boots and all this other crap
Click to expand...
Click to collapse
I had CM7 as my normal install, I just wanted to try honeycomb and my sd card was to slow to consider booting from it.

There's an image around these forums somewhere that lets you dual-boot Phiremod and HC preview on the SD (you just flash it to the SD and go).
It's always safer to play with SD new boots, since you won't hurt your EMMC installs.
With that really said -- the HC previews on the NC are ... not really worth playing. There's no hardware acceleration - so that are abysmally slow. Really bad. You'll try swiping the home screen and go "ugh, back to CM7".
Quite honestly, there's nothing better for us than CM7 on SD or EMMC. Phiremod is just candycoating on CM7 anyhow - and nobody's ever come up with a ROM for us that isn't just fiddling around with a base CM7 or a themed layer on top of it.
What we get from our CM7-Encore installs is pretty much what we want. Theme it all you like - but in reality, nothing else beats it.

youre in luck...my Bricked nook is not getting returned...
i have a bricked nook ...had cm7 on it for 1 1/2 years ..thought i would put cm10.1 on ...to emmc... everything went well installed cm10.1 then gapps ...forgot to install cwm or twrp...oops ...been bricked ever since ..tried pulling battery ..left it disconnected 8 hours ..plugged battery back ...still unresponsive ...tried tips section from leapinlar to no avail ..tried 8 boot method nada!!...never even see a backlight flash ..battery shows 5volts so its not dead...any help ?? anyone??...thanks
---------- Post added at 04:56 PM ---------- Previous post was at 04:51 PM ----------
omap3630 only sign of life .. for less than a second when power button is held down for say....10 seconds...on the USB to the pc..of course no booting happens needless to say..

bodecove said:
i have a bricked nook ...had cm7 on it for 1 1/2 years ..thought i would put cm10.1 on ...to emmc... everything went well installed cm10.1 then gapps ...forgot to install cwm or twrp...oops ...been bricked ever since ..tried pulling battery ..left it disconnected 8 hours ..plugged battery back ...still unresponsive ...tried tips section from leapinlar to no avail ..tried 8 boot method nada!!...never even see a backlight flash ..battery shows 5volts so its not dead...any help ?? anyone??...thanks
---------- Post added at 04:56 PM ---------- Previous post was at 04:51 PM ----------
omap3630 only sign of life .. for less than a second when power button is held down for say....10 seconds...on the USB to the pc..of course no booting happens needless to say..
Click to expand...
Click to collapse
And bootable SDs do not work? It will not even turn the screen on unless there are valid boot files in the boot partition or on a bootable SD.
Sent from my Nook HD+ running CM10.1 on emmc.

leapinlar said:
And bootable SDs do not work? It will not even turn the screen on unless there are valid boot files in the boot partition or on a bootable SD.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
tried both from ,,A 10 post .... New Bootable CWM Recovery SD (v5.5.0.4 and now v6.0.1.2)
....tried both versions also 1gb_clockwork-3.2.0.1-eyeballer version ...win32diskimage ...hp format utility also formatted with sdformatter

bodecove said:
tried both from ,,A 10 post .... New Bootable CWM Recovery SD (v5.5.0.4 and now v6.0.1.2)
....tried both versions also 1gb_clockwork-3.2.0.1-eyeballer version ...win32diskimage ...hp format utility also formatted with sdformatter
Click to expand...
Click to collapse
Well, unless you can get a bootable SD to boot, you are toast.
Sent from my Nook HD+ running CM10.1 on emmc.

leapinlar said:
Well, unless you can get a bootable SD to boot, you are toast.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
any chance I am missing some simple step...
---------- Post added at 09:36 PM ---------- Previous post was at 09:14 PM ----------
bodecove said:
any chance I am missing some simple step...
Click to expand...
Click to collapse
...what are your thoughts on making the sd cards with my linux(mint 14) laptop ...am I grasping for straws??

Nook wont boot up

Hey, i'm new. Just made this account to get help with my nook. Anyway i'll just tell you all what happened because i don't know much about it.
There's two problems i have with it. 1 - Can't sync my google account and 2 - Can't get past the boot animation, keeps re-booting
BTW just got the nook color second hand yesterday, he said it had Android 2.2? on it, not too sure. He also said he did a factory reset on it, hence me trying to link my google account etc. As of right now, i'm not sure if it is rooted or has a ROM? or anything, i just want it going again.
Problem 1 - It was going fine and I was setting it up with the android start up thingy on the screen, but no matter what I tried I couldn't sync my google account with it to get on the android store. I could go on the internet and gmail etc fine, just nothing that needed a google account synced. I tried the usual fix of signing into YouTube using the gmail account but this still didn't link the device to my google account.
Problem 2 - Just last night when I was reading a book on it, it shut off randomly, I thought thats odd because it was like half battery, so I plugged it in via usb. Now whenever I plug it in to usb. It reboots and reboots and reboots. It shows the touch the future of reading logo, then a grey n, then the screen flashes yellow for a split second. It goes to a screen saying it is installing a new software update, but would cut out part way through and re-start the reboot loop. When i unplug it from the power it shuts off and wont turn on. I tried a factory reset and this started, but when it finished 'clearing data' it cut out and restarted the boot loop. As i'm typing it's next to me continuously re-booting.
Please help!! I'm a noob and need guidance haha.
But seriously thanks to anyone who helps
Joel

It could be trying to do a self repair of / rom and failing. Read about that in my tips thread linked in my signature. Look at item A12.

leapinlar said:
It could be trying to do a self repair of / rom and failing. Read about that in my tips thread linked in my signature. Look at item A12.
Click to expand...
Click to collapse
Thanks for the reply. I think i've got nook version 1.1. thats what it said before it started the boot loop. I'm just wondering what i need to flash to the sd card?
Thanks

longschlongsilver said:
Thanks for the reply. I think i've got nook version 1.1. thats what it said before it started the boot loop. I'm just wondering what i need to flash to the sd card?
Thanks
Click to expand...
Click to collapse
Make yourself a bootable CWM card as in my item A10. Then you can flash whatever you want. A new stock 1.4.3 as I said in A12 or partition repairs as I said in my partition repair thread. Or CM roms. Or the romrestore repair zip. Lots of possibilities.

leapinlar said:
Make yourself a bootable CWM card as in my item A10. Then you can flash whatever you want. A new stock 1.4.3 as I said in A12 or partition repairs as I said in my partition repair thread. Or CM roms. Or the romrestore repair zip. Lots of possibilities.
Click to expand...
Click to collapse
So I make the CWM card. If i flash the stock 1.4.3 is that how it comes originally? Then can i root it from there, then CM7 etc? And is that all compatible with the 1.1 version? sorry for all the questions. and thanks so much! Any ideas on syncing a google account once i get it going?
Cheers

If you want to run stock, flash the 1.4.3 zip that I linked to. It is B&N's lastest version of stock (newer than 1.1) that I modified so it can be flashed with CWM. Then go to Manual Nooter 5.02.19. That will root you and allow you to install other apps.
Or if you want CM, just flash the version you want followed by the appropriate gapps zip. You do not need to update stock first, just flash away.
It is a good idea when switching types of roms to wipe first. You can flash my format 5,6,7 zip to wipe if you want.
Edit: After rereading your first post, you must get out of your bootloop before you can run anything. Just flashing a new rom may not fix it. If it does, great, but you may need to flash some repair zips first. And if you wipe, that may fix your Google login issues.

leapinlar said:
If you want to run stock, flash the 1.4.3 zip that I linked to. It is B&N's lastest version of stock (newer than 1.1) that I modified so it can be flashed with CWM. Then go to Manual Nooter 5.02.19. That will root you and allow you to install other apps.
Or if you want CM, just flash the version you want followed by the appropriate gapps zip. You do not need to update stock first, just flash away.
It is a good idea when switching types of roms to wipe first. You can flash my format 5,6,7 zip to wipe if you want.
Edit: After rereading your first post, you must get out of your bootloop before you can run anything. Just flashing a new rom may not fix it. If it does, great, but you may need to flash some repair zips first. And if you wipe, that may fix your Google login issues.
Click to expand...
Click to collapse
Sorry for my noobness but what does flash and wipe mean? Never done this before. I just got an sd card reader thing so i can write things on it with win32 disk imager. So to get out of the boot loop i have to flash? a repair zip? I had a look on the help post of yours, would 'NookColor-emmc-stockrecovery-CWM5504asAlt.zip' work? and do i write the whole zip file on the sd card without extracting anything? then what would i do? just turn it on? sorry once again you're a huge help

The first thing you do is unzip the file cwm-5.5.0.4-bootable_SD.zip. That will give a file about 200MB in size with a .img file name. Use win32diskimager to burn that .img file to your SD. Then that card can be used to copy (flash) things to your internal memory to either fix it or put new roms on it. If you put that card in the nook and boot up from a powered off state, the CWM program should start. You can use that to put new things on your internal memory.
Wipe means to format or erase things. Sometimes it is important to wipe what is already there before you try to put new things on.
Given your description of the problem, I would burn the CWM to SD, copy the zip named romrestore-CWMflashable.zip to the SD with your PC, put the SD in the nook, boot and the CWM menu should come up. Select "install zip from SD" and hit the n button. Then select "choose zip from SD" and hit n. Then scroll to the file you copied and hit n. Confirm the choice and CWM will begin it's thing. Watch for error messages. If it completes successfully, power off and remove the SD and see if it will boot. If it does boot successfully, you just repaired it. If it did not repair it, go to my partition repair thread and try some of those repair zips using the same technique.
If you were successful with the repairs, you can use the CWM SD to flash new roms to internal memory (stock or CM). Don't forget to wipe first if you do. An easy, surefire way to wipe is to flash my format 5-6-7 zip on my tips thread.

FIXED! Thanks so much. Gonna root now and then install cm7 or something haha, thanks again for your patience!

[Q] Have I bricked this Nook?

Hi everyone.
My father recently bought himself a Nook simple touch running 1.20 firmware on the promise that I would root it for him so he could borrow books from the local library using overdrive and also use Kindle. I have done similar with many devices in the past - installing custom firmware on Android tablets, jailbreaking iPHones (sorry to swear on here ) etc etc.
I read how easy it was to do and thought I would have no problems. Boy was I wrong!
I downloaded touchnooter 2.1.31 and wrote it to a micro sd card using a built in card reader on the PC and Win32 disc imager.
I put the card in the Nook and powered up. Everything happened as it should, the screen flashed to black etc etc. I took the card out and powered up. I got the "Your NOOK is starting up" message and then it just froze on that screen.
Holding the power and N button down reset it but it just went back to that screen. Eventually, though, for some reason on one of these cycles it reset itself.
So I set the machine up, and started again.
This time I restarted the whole process from scratch, put the card in the machine and powered up. This time, the screen never flashed to black at all, and I am not stuck at the "Your NOOK is starting up" screen. Trouble is, this time holding the power and n button down do nothing (they did a few times, but now nothing) and the machine seems completely dead.
My Dad aint going to be too happy if I've killed his Nook - so can anyone help me?
Or am I beyond help (don't answer that, )
Thanks in advance.

You neglect to mention taking a backup before your attempts at rooting; are we to imply that you don't have one you can restore from?

cowbutt said:
You neglect to mention taking a backup before your attempts at rooting; are we to imply that you don't have one you can restore from?
Click to expand...
Click to collapse
Thanks for the reply. Oh dear. I read three different guides and not one of them mentioned that you could back up (I presume the Nook firmware itself) first?

You could preform a factory reset using the 6 failed boots method, I cant post links yet but if you do a search for "nook simple touch factory reset" you should instructions at nookdevs.
The NST has a nice feature of keeping a factory recovery partition that stores a factory.zip and will restore the NST using the above method.
Sometimes it takes quite a few tries for this to work, the timing has to be right. It will wipe everything (except the factory partition of course) and restore the nook to the how it was out of the box.

@norwichred: you might want to consider using the Touch-Formatter recovery tool http://forum.xda-developers.com/showthread.php?t=1475613. I had used it successfully to recover from a failed attempt at routing my NST.

Brick
Try holding the left and right buttons down Bottom ones at the sides of the screen when booting.
This should put it into restore to defaults mode.
This helped when I tried flashing with touchnooter. Ended up going back to defaults and then rooted with Nook Manager which went faultless.

norwichred said:
Hi everyone.
My father recently bought himself a Nook simple touch running 1.20 firmware on the promise that I would root it for him so he could borrow books from the local library using overdrive and also use Kindle. I have done similar with many devices in the past - installing custom firmware on Android tablets, jailbreaking iPHones (sorry to swear on here ) etc etc.
I read how easy it was to do and thought I would have no problems. Boy was I wrong!
I downloaded touchnooter 2.1.31 and wrote it to a micro sd card using a built in card reader on the PC and Win32 disc imager.
I put the card in the Nook and powered up. Everything happened as it should, the screen flashed to black etc etc. I took the card out and powered up. I got the "Your NOOK is starting up" message and then it just froze on that screen.
Holding the power and N button down reset it but it just went back to that screen. Eventually, though, for some reason on one of these cycles it reset itself.
So I set the machine up, and started again.
This time I restarted the whole process from scratch, put the card in the machine and powered up. This time, the screen never flashed to black at all, and I am not stuck at the "Your NOOK is starting up" screen. Trouble is, this time holding the power and n button down do nothing (they did a few times, but now nothing) and the machine seems completely dead.
My Dad aint going to be too happy if I've killed his Nook - so can anyone help me?
Or am I beyond help (don't answer that, )
Thanks in advance.
Click to expand...
Click to collapse
Ok, firstly TouchNooter doesn't work with v1.20, you need to use GlowNooter. Don't worry, I found this out the hard way too. I actually found NookManager + GAPPSAttack gave the cleanest results.
Try holding down the power button for varying amounts of time, between 0 and 15 seconds, eventually you'll get it to reboot. You don't need to press the n button.
To get back to v1.21 do this - http://forum.xda-developers.com/showpost.php?p=41296148&postcount=2

noodles2k said:
Ok, firstly TouchNooter doesn't work with v1.20, you need to use GlowNooter. Don't worry, I found this out the hard way too. I actually found NookManager + GAPPSAttack gave the cleanest results.
Try holding down the power button for varying amounts of time, between 0 and 15 seconds, eventually you'll get it to reboot. You don't need to press the n button.
To get back to v1.21 do this - http://forum.xda-developers.com/showpost.php?p=41296148&postcount=2
Click to expand...
Click to collapse
Guys - thank you SO much for your replies so far.
I have managed to reset the nook using your methods above, and am about to try again. I'll look into nook manager and glownooter. Is there a general opinion on which is better?

now , download the package from BN website (1.2.1) and apply manual update then ur nook will be 1.2.1 version then take Back up and make sure about 1.9GB and save it in safe place , and then play with ur nook as much as u want
PS: if u want root 1.2.1 nook software then use Nook Manager also if upgrade steps u cant get , tell me and i will replay u shortly
TC about ur father's Nook

speedman2202 said:
now , download the package from BN website (1.2.1) and apply manual update then ur nook will be 1.2.1 version then take Back up and make sure about 1.9GB and save it in safe place , and then play with ur nook as much as u want
PS: if u want root 1.2.1 nook software then use Nook Manager also if upgrade steps u cant get , tell me and i will replay u shortly
TC about ur father's Nook
Click to expand...
Click to collapse
Ok so I have taken a backup and rooted using nook manager. I am waiting for his google password (he's changed it without telling me) so I can install GAPPSattack. Will this give me a nice desktop? At the moment I have a file explorer view and he won't understand that.

norwichred said:
Ok so I have taken a backup and rooted using nook manager. I am waiting for his google password (he's changed it without telling me) so I can install GAPPSattack. Will this give me a nice desktop? At the moment I have a file explorer view and he won't understand that.
Click to expand...
Click to collapse
Try ADW Launcher with this theme
or this theme depending on the background colour.
If you don't like the icons you can turn them off under Themes/Customize.
The other launcher worth a try is 7 Launcher.
I've attached black and white image you might find useful.

well, it's all rooted and working now I am very grateful to ALL who have contributed to help me out here. Few things I'm not overly happy with so want to try and sort this out for him before I give it to him - want an easy way for him to get to a list of apps or to the nook homescreen using buttons but apart from that it's great.
Thanks again!

norwichred said:
well, it's all rooted and working now I am very grateful to ALL who have contributed to help me out here. Few things I'm not overly happy with so want to try and sort this out for him before I give it to him - want an easy way for him to get to a list of apps or to the nook homescreen using buttons but apart from that it's great.
Thanks again!
Click to expand...
Click to collapse
for me
i had ADW launcher and Button savior that let me navigate to home screen in any time when i be on any app .... so try both and for ADW launcher home screen , easy to use and u can view all apps like u have android phone

[Q] Nook Color won't boot after cm7 install and update

I see that there are other posts on this same subject and I have looked through them to try and fix my problem but I haven't found a proper solution yet. I rooted my NC (1.4.3) cm7 and it worked alright after that but apps weren't available for the version so I attempted an update then reboot. I powered down and pulled the micro sd then powered up and it gets to "Read Forever" then goes black. I have tried cm10 with manual nooter in order to try and re-do the partition on the device but it won't do anything once I put the card in and try to boot. I have had to dis-assemble it so that I can pull the battery and get it to power down completely. I have tried a factory reset boot, sd card boot with auto nooter, manual nooter, cm7, cm10, and other options on the sd card, I have also tried to boot directly from internal memory. I have tried the process of plugging it into the computer through the usb cable. I have charged the battery completely so that isn't a problem.
I have read that it is virtually impossible to brick this thing but I think I might have succeeded....any input on what I can try next would be helpful...

Fatguy86 said:
I see that there are other posts on this same subject and I have looked through them to try and fix my problem but I haven't found a proper solution yet. I rooted my NC (1.4.3) cm7 and it worked alright after that but apps weren't available for the version so I attempted an update then reboot. I powered down and pulled the micro sd then powered up and it gets to "Read Forever" then goes black. I have tried cm10 with manual nooter in order to try and re-do the partition on the device but it won't do anything once I put the card in and try to boot. I have had to dis-assemble it so that I can pull the battery and get it to power down completely. I have tried a factory reset boot, sd card boot with auto nooter, manual nooter, cm7, cm10, and other options on the sd card, I have also tried to boot directly from internal memory. I have tried the process of plugging it into the computer through the usb cable. I have charged the battery completely so that isn't a problem.
I have read that it is virtually impossible to brick this thing but I think I might have succeeded....any input on what I can try next would be helpful...
Click to expand...
Click to collapse
A good place to start with boot problems is here http://forum.xda-developers.com/showthread.php?t=949699
You should also probably read at least the first two post in this thread http://forum.xda-developers.com/showthread.php?t=1621301
You need to do a better job of describing your situation if you want help: how your NC was set up; exactly what you did that created the problem; what you want to end up with. At a guess, I will assume the you were running rooted stock on EMMC and CM7 on SD, decided to update CM7 to CM10, but used directions for updating CM that was installed to EMMC. I am not an expert on this, but sort of remember Leapinlar posting advice for someone (or maybe a few (?dozen?) someones) with this problem, you might want to search for those threads. If not, you have probably corrupted your boot records, recovery and/or possibly some partitions. Check out this thread by Leapinlar for help http://forum.xda-developers.com/showthread.php?t=1759558
If you decide to install CM on EMMC, see this thread http://forum.xda-developers.com/showthread.php?t=1030227
To install stock BN firmware to EMMC, see this thread http://forum.xda-developers.com/showthread.php?t=931720
To install CM on SD, see this http://forum.xda-developers.com/showthread.php?t=1941858
Good luck and don't forget to hit the thanks button in the posts you use

webyrd said:
A good place to start with boot problems is here http://forum.xda-developers.com/showthread.php?t=949699
You should also probably read at least the first two post in this thread http://forum.xda-developers.com/showthread.php?t=1621301
You need to do a better job of describing your situation if you want help: how your NC was set up; exactly what you did that created the problem; what you want to end up with
Good luck and don't forget to hit the thanks button in the posts you use
Click to expand...
Click to collapse
Here are the exact steps that I took to get to where I am:
I rooted the stock EMMC with the manual nooter to be able to get the Google Play Market, that worked well and I had access but the Android version was so old that I couldn't install the apps that I was after.
I then attempted to flash the EMMC to CM7, all status came up as pass and I rebooted. when it came up after the reboot all I got was the "Read Forever" screen.
since then I have read many different posts and tried to boot from the SD...that doesn't work, the screen just stays black
I have tried to boot to CWM to repair or rebuild the EMMC...same outcome
once I remove the SD all I get to is the "Read Forever" screen...
I have read and tried all the steps listed in every post you listed but they all have the same outcome
I have attached a pic of what the screen looks like when it tries to boot.

Fatguy86 said:
Here are the exact steps that I took to get to where I am:
I rooted the stock EMMC with the manual nooter to be able to get the Google Play Market, that worked well and I had access but the Android version was so old that I couldn't install the apps that I was after.
I then attempted to flash the EMMC to CM7, all status came up as pass and I rebooted. when it came up after the reboot all I got was the "Read Forever" screen.
since then I have read many different posts and tried to boot from the SD...that doesn't work, the screen just stays black
I have tried to boot to CWM to repair or rebuild the EMMC...same outcome
once I remove the SD all I get to is the "Read Forever" screen...
I have read and tried all the steps listed in every post you listed but they all have the same outcome
I have attached a pic of what the screen looks like when it tries to boot.
Click to expand...
Click to collapse
Hopefully someone more knowlegeable will look in, this is above my level. The fact that the Read Forever still displays shows that CM did not install correctly, if it's a newer version. You might want to try posting your problem in the same thread that you got the install instructions from.