Feb 2012: This guide is somewhat obsolete now, because of WindowsBreak project. A simpler unlock guide is in posted here and a complete unlock + Internet Sharing guide is here.
I did this guide as I didn't find a complete noob guide, up to date and with all links in one place.
Noob friendly unlock and update to Mango (keeping Chevron unlock) how-to
Prequisites and must read/understand before proceeding:
Zune 4.7 might be needed, I'm not sure 4.8 works. Uninstall 4.8 and install 4.7 if unsure (and don't update it).
Micro SD card: If you want to install a micro SD card, you have to do it before step 2 (recommended after flashing 7004 - step 1). Also recommended to format the card beforehand with FAT32 (32K or 64K clusters). Then hard reset the phone from Settings/About/"Reset your phone" or the 3 buttons combo (see Focus wiki). When a new micro SD card is added, the phone requests a hardware reset to recognize it and properly work.
Flashing: doesn't affect in any way phone's functioning as long as it's not interrupted in mid process or the phone doesn't have a hardware fault. Recommended to flash the phone on a laptop or a PC+UPS. You can backup your current firmware so you can restore if needed. Flashing, downgrading, upgrading firmware etc does not affect Network Unlock. Once your phone is unlocked to any network, it will remain so, regardless of flashing firmware.
Remember, if you hard reset (in Mango - or any WP7 OS version), you will lose Chevron unlock (ability to deploy XAPs) and to get it again you will have to re-do all the unlock process above.
You can use hard reset to revert to "factory" settings
Optional: To deploy XAPs, Windows Phone Developer Tools is no longer a requirement (about 3 GB). W.I.N.C.O.'s mini SDK WP7 is a smaller solution (4 mb instead of 3 GB - see point 3 below.)
0. (optional) Backup your current firmware, PC program and steps read here.
1. Flash AT&T or Rogers ROMs (7004) from this thread (note: 1st post links no longer valid, new links here)
Personally I recommend Rogers, as it's cleaner: doesn't have the AT&T apps & customization/logo etc. If you're unsure how to do ROM flashing, read my post here (I referenced AT&T "Cetus" ROM there, so replace "Cetus_ATT" with "Rogers").
1b. (optional) Add the micro SD card and do a hard reset (Settings/About, press "Reset your phone"). For compatibility, read this thread or the Focus wiki.
2. Unlock with Chevron, program, steps and video tutorial here
2b. Please note: the Chevron certificate has expired on 25 November 2011. To still be able to use it do this: mail the certificate to yourself. Open it on the mail in the phone, click on the certificate and when the "shield" appears, close it, don't install it. This just insures that the certificate has been downloaded to the phone, so you won't need internet connection to install it later. Now, disconnect the PC from internet, and set the date on PC prior to 25 Nov 2011. Then, set the same date on the phone and put the phone in Airplane mode. Then, install the Chevron certificate. After this, reconnect the PC to Internet and use Chevron to unlock.
3. To deploy (install) XAPs, download and install W.I.N.C.O.'s mini SDK WP7 and then wXapAssistant
3b. Optional/alternate method of 3): if you already installed Windows Phone SDK, you can use Phone7Market on PC from here to deploy XAPs. Once installed, in the folder you have "wp7-deploy.exe" which you can use to deploy/install XAPs, ie wp7-deploy.exe full_path_to_XAP\XAP.XAP, as in:
wp7-deploy.exe C:\WP7\New_SMS_Unlock.xap
4. Immediately after unlocking, install and run Samsung Tools from here, to prevent relock
Check all checkboxes and reset.
4b. (optional) In Dialer, dial ##634# , this should open Diagnosis v929 (just for checking)
5. Install WP7 Root Tools from here
6. Deploy New_SMS_Unlock.xap from here
7. Run WP7 Root Tools on the phone, and in Explorer tab, create a folder "provxml" in the root directory. Now go inside "Applications" subfolder, then inside "Install" subfolder and locate folder "D19A....". Inside, find the "unlock.xml" file. Tap and hold and press "Copy". Then navigate back to "provxml" folder you created, go inside and press "Paste", and see if you have the "unlock.xml" file in it.
Please note: you won't be able to see the "unlock" option in Diagnosis by typing *#9908# until Mango (Rogers) or NoDo/Mango (AT&T).
8. Connect the phone in Zune and update the phone all the way to Mango (7720/7740/later). Keep in mind that if you do this with Zune 4.7 you will have to update to Zune 4.8 now to be able to sync. That's ok.
9. In Mango, uninstall Diagnosis app (if you installed it).
10. Open Diagnosis again by typing ##634# in Dialer. When in Diagnosis type *#9908# . Select "unlock" (should be the last item) and press "Save". It should say "Loading GPRS..."and you can exit Diagnosis.
10.b (optional) If you want to be extra sure, you can re-do step 4 again for good measure.
Congratulations, you are now unlocked in Mango!
Important:
In case something happens and your phone gets re-locked, just run only step 10+10b and you will be unlocked again.
Optionally, you can do Interop unlock, read here. Alternatively, you can enable Internet Sharing+Interop unlock (2 in 1, in the file "DiagProvXMLv0.91_IS.xap") from here (run "DiagProvXMLv0.91_IS.xap", go to "iso store" tab, press and hold "Interop Unlock" then press and hold "Internet Sharing"). You will also need to deploy a fix for the 3G: "Samsung Repair 3G by Heathcliff74.xap" from here if you do Internet Sharing.
This has been tested to work on AT&T and Rogers Focus with hardware revision 1.3, might work in 1.4.
To check what hardware revision you have, either look under the battery or check my post/thread here.
Don't forget to press Thanks on the original tool/thread poster!
Thank you very much. I was looking for exactly such post/article. I have Zune 4.8 already installed. Can I go ahead with it?
sandeepnk said:
Thank you very much. I was looking for exactly such post/article. I have Zune 4.8 already installed. Can I go ahead with it?
Click to expand...
Click to collapse
Sure, please try. No worries, if it doesn't work, just uninstall it and install 4.7
I have reached till step 7. I have now copied "unlock.xml" to a new folder "provxml" in root folder.
Before proceeding further, I want to confirm one thing. I did *#9908# while still at 7004 in diagnostic app. I do not see unlock option. Is this normal? Is it only visible once I am at Mango?
If yes, then I can upgrade to Mango without any worry.
sandeepnk said:
I have reached till step 7. I have now copied "unlock.xml" to a new folder "provxml" in root folder.
Before proceeding further, I want to confirm one thing. I did *#9908# while still at 7004 in diagnostic app. I do not see unlock option. Is this normal? Is it only visible once I am at Mango?
If yes, then I can upgrade to Mango without any worry.
Click to expand...
Click to collapse
Yes, it's normal. Diagnosis doesn't support the unlock until Mango. Will add this info to the guide too. Thanks for testing!
Thanks again. I will go ahead and let know the result for others. Hope it finishes without any issues
I am unable to unlock my phone, the chevronwp7.exe gives an error message stating "I'am having trouble communicating with the phone" Please help!!
killmastern3 said:
I am unable to unlock my phone, the chevronwp7.exe gives an error message stating "I'am having trouble communicating with the phone" Please help!!
Click to expand...
Click to collapse
Chevron is quite an iffy program, please make sure you respect the steps there exactly and also check the video tutorial. Also, best way to achieve that is to close all programs running and re-try unlocking. Skype for example interferes with the unlock process.
EnderPsp said:
Chevron is quite an iffy program, please make sure you respect the steps there exactly and also check the video tutorial. Also, best way to achieve that is to close all programs running and re-try unlocking. Skype for example interferes with the unlock process.
Click to expand...
Click to collapse
Have followed all the steps including changing the date and all.. I have done it before with success. Had to hard reset the phone, hence trying to unlock again. Will try rebooting the system and have a go at it again..
killmastern3 said:
Have followed all the steps including changing the date and all.. I have done it before with success. Had to hard reset the phone, hence trying to unlock again. Will try rebooting the system and have a go at it again..
Click to expand...
Click to collapse
I also had a problem Saturday when I updated my SD from 16 GB to a 32 GB one. Initially Chevron didn't work, it worked after I connected the laptop to internet and restarted Zune. Also, make sure the date is prior to 25 November (try 1 Oct 2011, that worked for me) on both devices.
EnderPsp said:
I also had a problem Saturday when I updated my SD from 16 GB to a 32 GB one. Initially Chevron didn't work, it worked after I connected the laptop to internet and restarted Zune. Also, make sure the date is prior to 25 November (try 1 Oct 2011, that worked for me) on both devices.
Click to expand...
Click to collapse
Got it... Need to be connected to the internet.. Thanks a lot for the help!!
I have finished updating to Mango and I was able to unlock Focus. So I can confirm that all works even if Zune 4.8 is used for each step. Yahoo!!
I haven't done Interop-unlock yet, I will do it soon. But that also should work without any issues.
Edit: Does the limit remains unlimited for applications? And is there any additional step(s) required to keep it unlocked similar to the one which was done by running Samsung tools?
thank you for the thread EnderPsp...this is what i was looking for...
i think i dont need to do the 1st step as i am already on 7004 and just got the phone from ATT.
I installed zune 4.8, installed developer sdk from MS, installed the certificate in phone by changing the dates. Now when i connect the phone to pc, and run chevron in admin mode with the phone on home screen and zune running, it opens up, i check the 2 boxed and then it says problem communicating with the device - make sure you are connected via USB, etc etc...i guess this is a common problem but i am unable to find any solution...i tried many times but it shows the same error...
Your help highly appreciated..
shakeebkazia said:
thank you for the thread EnderPsp...this is what i was looking for...
i think i dont need to do the 1st step as i am already on 7004 and just got the phone from ATT.
I installed zune 4.8, installed developer sdk from MS, installed the certificate in phone by changing the dates. Now when i connect the phone to pc, and run chevron in admin mode with the phone on home screen and zune running, it opens up, i check the 2 boxed and then it says problem communicating with the device - make sure you are connected via USB, etc etc...i guess this is a common problem but i am unable to find any solution...i tried many times but it shows the same error...
Your help highly appreciated..
Click to expand...
Click to collapse
Try this:
- install the Samsung drivers from here
- set the date to 1 Oct 2011 and disconnect the PC from internet
- set the same date on the phone and do a hard reset. Re-enter your live id and e-mail (to where you sent the Chevron certificate) and install the certificate, then set the phone to Airplane mode
- reboot and once windows loads don't open any program, and close the ones automatically started (YM, Skype etc)
- connect PC to internet, start Zune and try to unlock in Chevron
Let me know if that works for you. Keep in mind that on a 64 bit OS it might be harder to unlock.
EnderPsp said:
Try this:
- install the Samsung drivers from here
- set the date to 1 Oct 2011 and disconnect the PC from internet
- set the same date on the phone and do a hard reset. Re-enter your live id and e-mail (to where you sent the Chevron certificate) and install the certificate, then set the phone to Airplane mode
- reboot and once windows loads don't open any program, and close the ones automatically started (YM, Skype etc)
- connect PC to internet, start Zune and try to unlock in Chevron
Let me know if that works for you. Keep in mind that on a 64 bit OS it might be harder to unlock.
Click to expand...
Click to collapse
Damn, i got frustrated yesterday and updated my phone...it says im on windows 7.5, OS version 7.10.7720.68...how should i go about unlocking it now ? btw i am on windows 7 64bit....
Thank you
shakeebkazia said:
Damn, i got frustrated yesterday and updated my phone...it says im on windows 7.5, OS version 7.10.7720.68...how should i go about unlocking it now ? btw i am on windows 7 64bit....
Thank you
Click to expand...
Click to collapse
Either of these
- this method
- the developer unlock for $99 or whatever it is these days
- Chevron labs token for $9, but that's not always working (depending on the phone and revision...)
You can always backup first and try this. Worst case scenario you'll revert back.
EnderPsp said:
Either of these
- this method
- the developer unlock for $99 or whatever it is these days
- Chevron labs token for $9, but that's not always working (depending on the phone and revision...)
You can always backup first and try this. Worst case scenario you'll revert back.
Click to expand...
Click to collapse
by '- this method' do you mean this guide will work on mango too ?
how do i backup ? from zune ? i come from android that is why i am confused....
Thank you
shakeebkazia said:
by '- this method' do you mean this guide will work on mango too ?
how do i backup ? from zune ? i come from android that is why i am confused....
Thank you
Click to expand...
Click to collapse
This guide allows you to unlock, IF you flash. If you are in Mango you can't unlock using this guide unless you do the flash downgrade, but the other 2 methods should work.
You backup from the tool specified in the link and you restore using Zune, as the backup is created to be accessed and used by Zune.
currently flashing 7004 rom from the given link...will post with updates..
im done...now on mango and able to deploy xap's....is there any limit for the number of xap's i can install ?
Thank you
Related
Hi everybody.
I'm disappointed, I've looked all the posts in this forum and in the french one (HTC DEV). I have followed all the instructions and I'm still locked after the click on the unlock button in chevronwp7 with uhoh message.
register base ok
chevronwp7.cert on the phone
zune full synchronized (not guest)
host file free to write
port 443 free
no firewall no anti virus
no skipe
airplane mode on or off (the 2 modes tested)
task29 done and re install WP7
windows 7 re installed
zune re installed
What have I forbitten?????
cheap66 said:
Hi everybody.
I'm disappointed, I've looked all the posts in this forum and in the french one (HTC DEV). I have followed all the instructions and I'm still locked after the click on the unlock button in chevronwp7 with uhoh message.
register base ok
chevronwp7.cert on the phone
zune full synchronized (not guest)
host file free to write
port 443 free
no firewall no anti virus
no skipe
airplane mode on or off (the 2 modes tested)
task29 done and re install WP7
windows 7 re installed
zune re installed
Are you running Windows 7, have you installed the SDK, have you installed Zune and have you followed this guide to the letter?
http://forum.xda-developers.com/showthread.php?t=911579
What have I forbitten?????
Click to expand...
Click to collapse
Do all of that and you should have a working phone that is unlocked.
1. Install WP7 sdk Windows Phone Developer Tools; done
2. Install zune;done
3. Make partneship with zune and phone;done
4. Attach the ChevronWP7.cer(you found in the toolkit) to your email and send the email to your email itself (On PC);done
5. Login to your email account (On Phone), Open the email, Select attachment and install the cert;done
6. Connect your phone to pc and make sure zune is running in background;done
7. Run the unlocker (ChevronWP7.exe) and click unlock button(Make sure your phone date is set correctly)done
(you need to close skype and disable network adapter.. hamachi.. wireless.. Dropbox.. etc)done
still locked
Are you doing a full hard reset and then reinstalling the certificate? It should work after the PortalUrlProd and PortalUrlInt values get returned to the default.
yes I have done by pushing + and - volume button
solution
the default year in WP7 is 2010 it took me a while to realize i was forcing the phone due to the date.
small thing easy to overlook hope it helps
edit: with the correct date phone should unlock
cheap66 said:
1. Install WP7 sdk Windows Phone Developer Tools; done
2. Install zune;done
3. Make partneship with zune and phone;done
4. Attach the ChevronWP7.cer(you found in the toolkit) to your email and send the email to your email itself (On PC);done
5. Login to your email account (On Phone), Open the email, Select attachment and install the cert;done
6. Connect your phone to pc and make sure zune is running in background;done
7. Run the unlocker (ChevronWP7.exe) and click unlock button(Make sure your phone date is set correctly)done
(you need to close skype and disable network adapter.. hamachi.. wireless.. Dropbox.. etc)done
still locked
Click to expand...
Click to collapse
On #5 did you use touchXplorer to copy that file to Windows directory?
Remember Zune will lock you HD2 everytime you connect your usb. use the crack in this forum to prevent that.
are you using windows XP?
Also try putting chevronwp7.exe in the root of your c: drive and run as administrator. I've seen people say that it isn't necessary, but I had to.
Also if you're using vista or windows 7 make sure UAC is disabled.
besides turning off the firewall, i turned off the windows defender service.
It might do the trick.
Solved
Thanks to everybody
My problem is solved.
Like audit angel was saying the default year is 2010, and the solution was there for me.
When I changed the year to 2011 Chevronwp7 did his job.
What an idiot I was!!!
This is guide on HowTo unlock your trophy ...Μost of those info are scattered over the xda...
I put them together as an easy to use guide
At this moment only rom version 7004 and 7008 (pre-NoDo) can be unlocked.
There is a new try by the devs here to unlock the post-NoDo roms...
OK lets start ...Download and extract this file package...
A. ULOCK
1. From your PC: Send a mail to your self (to an account that is accesible from your phone) and attach the
ChevronWP7.cer. file.
2. From your Phone: Open that mail and press the attachment (ChevronWP7.cer) to download it..
Wait unil finish and pres again to install the cerificate
3. Download and install Windows Phone Developer Tools from here.
4. Connect your phone to your pc with usb cable and make sure zune software has see your device and is
connected (not as a guest but a full). Also ignore/cancel any update messages from zune or your phone...
Finally make sure your phone is not in the lockscreen but in the home screen
5. From your PC: Run the app ChevronWP7.exe. Check both boxes and pres unlock.
6. If all went OK then you just Developer Unlock your device and you can sideload application.
B. Prevent from re-locking
Download and install in your phone the app Advance Configuration Tool 1.2 In the settings there is an
option to prevent from relocking...
C. If you have problems
1. Disable Firewall and Antivirus and put your phone to Airplain mode
2. The chevronunlock application runs only on Windows vista and Windows 7. Not in XP.
3. In your pc registry editor make sure the this key is like this:
[HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\WindowsPhone\\ProxyPorts]
“DeviceReg”=dword:000069C5
4. Any programm that use the Https protocol must be disable (skype is one)
5. Make sure the file hosts in the pc \Windows\system32\drivers\etc is NOT read only.
Here is the file package
And here is a video that i found on the forum
The file package has and some apps like WPDeviceManager.exe and MarketPlace_setup.exe.
What todo and where to go ...After the unlock
1. Now you are ready to install all the updates from Zune until your rom has the number 7392.
2. Setup your e-mail accounts.. from Settings/Emails Accounts
Warning... Your first windows live account that you will setup its the only one that you cant delete
3. Here also you can setup your facebook account. If you dont want to have all the FB "frients" in the contacts page the go settings/application/ people and check there.
4. Install from the market FAcebook and other apps from the market
5. Install Tom xap installer (in the package)...and now you are ready to sideload any application (xap) file that you want to your phone..
6. If your language its not one of the 4 natives ones then you want to install the application Native Keyboard...(in the package)
Its supporting a lot of lang by changing the German or Spanish keyboard...
The second file package contains the following apps
1 Native Keyboard - (in the package)
2. Registry Editor (in the package)
3. Βattery tool (in the package)
4. Facebook and FIM (MARKET)
5. Htc Apps (more that 10 apps from HTC )(MARKET)
6. Flixter and IMDB For movies fans.. (MARKET)
7. Shazam . (MARKET)
8. Wonder Reader και Tech News Now -- RSS google reader (MARKET)
9. Tile Notes- Yellow notes in live tile
Here are the apps not in the market
I will post some Free apps here
Please feel free to post any application that you want here
You should probably edit your original post for NoDo
Nevermind, sorry, I didn't that you already mentioned that. Maybe make it bold... And mention that Verizon phones come with NoDo in the flash - no way to flash back to 7004 or 7008...
Thanks for this guide.
Have a trophy updated to 7390, but restored back to 7008 with zune.
Sucessfully unlocked and ran advanced config tool and checked the "prevent phone from relocking", had to enable airplane mode for it to work, but suddenly now it seems to stay unlocked in normal mode everytime i open up zune.
Can i assume that now it would be ok to update to 7390? how about 7392, would that work too?
Edit: Works ok with 7392, still unlocked.
Did the same as espeneppi...restored my Trophy w/ Vodafone Branding back to 7008, but now chevron is giving that error message (make sure zune is running etc..)
When my phone was 7004 I had successfully jaibreaked w/ chevron
Anyone can help??
How can the device be unlocked if it is not accessible? I can't do anything on the phone. The device is stuck on boot loader screen and thats all it does.
volblood said:
How can the device be unlocked if it is not accessible? I can't do anything on the phone. The device is stuck on boot loader screen and thats all it does.
Click to expand...
Click to collapse
What did you do and you had your phone in that state ???
Hey i wanna try this but how do i know whit rom i got? is it hardware revision nr ? this is : 0003
i live in norway..
Hello ... i tryed this guide ! i worked until the step when im going to "run" Chevron i get this message its not possible to run couse it cant find my phone mace sure its connectet etc etc.. i dont know what i did wrong??
installed the devployer thing.. i worked!! but now the program crash.. chevron ..
i run it and boom.. the program has stopped running bla bla bla.. strange.
The device has a demo loop on it and I was trying to install four of the roms that ansar had posted but none of them worked. One of the roms put the phone in this state. I don't know what to do?
OK, thanks for guide. Two questions:
I will unlock regarding this guide my Trophy with 7004. Then I will prevent it from being relocked. Then, when Mango will go official, I will make update from 7004. Will it go directly to Mango, or will it make updates from 7004 to... and to... and at least to Mango?
Will phone stay unlocked after going to Mango?
Thanks for answers!
PS: Do you have some hint for free app to editing registry values? I need to change one value before Mango update so it will download Mango in my language...
I cant deploy anything after update. Is it locked again? ((
How to check is it unlocked?
nice guide ,thank you
try to upload any xap file and u'll see unlocked it or not
So I wanna buy a trophy, but the unlock and xap sideloading is VERY important for me.
Does this still work with mango ????
Thanks!
I tried this on Windows 8 and it doesn't work. It says I need Win 7 or Vista.
Could Anyone please help me?
Is the Windows Phone 7.1 SDK close enough? (Works in windows 8) http://www.microsoft.com/en-us/download/details.aspx?id=27570
Ive searched and searched. I know there are a million threads too.
I had my mango 7720.68 unlocked with chevron before but relocked it because i thought it was causing boot freeze.
Now it won't unlock, i've tried everything.
Cleared developer services in c:/windows/system32/drivers/host
Turn off firewall/anti-virus
Why would it previously work? Now its just
Uh-oh
Sorry im having trouble communicating with your phone
-please make sure its connected using USB
-please start the zune application
Please some feedback!! Thanks
becoz n mando the old chevron willll nt wrk i guss bt chevron opned a fficial site and for unlock costs $9
because MS cant fight anymore against it and decide to make money with it
http://www.chevronwp7.com/post/2709484164/upcoming-discussions-with-microsoft
http://www.techtree.com/India/News/...ft_Approved_WP7_Jailbreak/551-115402-580.html
hd2 head said:
Ive searched and searched. I know there are a million threads too.
I had my mango 7720.68 unlocked with chevron before but relocked it because i thought it was causing boot freeze.
Now it won't unlock, i've tried everything.
Cleared developer services in c:/windows/system32/drivers/host
Turn off firewall/anti-virus
Why would it previously work? Now its just
Uh-oh
Sorry im having trouble communicating with your phone
-please make sure its connected using USB
-please start the zune application
Please some feedback!! Thanks
Click to expand...
Click to collapse
I had the same problem, but then I used the wp7 update cab sender and dev_unlock.cab which worked
http://forum.xda-developers.com/showpost.php?p=17306513&postcount=1
custom ROM is already unlocked (BTTF and HD2O) but people not read instructions... chevron is useless for this ROM's
Alright i've checkron chevrons website and the tokens ($9) aren't for sale right now, but thanks everyone.
how to
since it took some time for me to find out how to side load apps in WP7.5, I'll explain it to other noobs:
You need to install Zune, the .NET 4.0 Framework and Windows Phone SDK 7.1. Then install Phone7Market (you can find it here). It comes with the Phone7Market itself, from which you can download your .xap files and with the Phone7Deployer. Connect your HD2 via Zune, create a desktop shortcut for the Phone7Deployer, get your xap file you want to deploy (i.e. from the Phone7Market) and drag&drop it on your desktop shortcut. It won't harm to check the two boxes (remove drm and the other one). A few seconds later, you should find your app/game on your device.
btw, this is FREE, so you don't need to pay 9 bucks for chevron.
anon1811 said:
since it took some time for me to find out how to side load apps in WP7.5, I'll explain it to other noobs:
You need to install Zune, the .NET 4.0 Framework and Windows Phone SDK 7.1. Then install Phone7Market (you can find it here). It comes with the Phone7Market itself, from which you can download your .xap files and with the Phone7Deployer. Connect your HD2 via Zune, create a desktop shortcut for the Phone7Deployer, get your xap file you want to deploy (i.e. from the Phone7Market) and drag&drop it on your desktop shortcut. It won't harm to check the two boxes (remove drm and the other one). A few seconds later, you shuold find your app/game on your device.
btw, this is FREE, so you don't need to pay 9 bucks for chevron.
Click to expand...
Click to collapse
Thank you, will try
edit
Error- Failed to connect to device as it is developer locked. For details on developer unlock, visit http://go.microsoft.com/fwlink/?linkid=195284
ill keep working on it thanks anyway
If using Back to the Future ROM see XBmod post http://forum.xda-developers.com/showpost.php?p=17917012&postcount=3309
Error- Failed to connect to device as it is developer locked. For details on developer unlock, visit http://go.microsoft.com/fwlink/?linkid=195284
Click to expand...
Click to collapse
I'm sorry to hear that, but I can't help you with that since I don't have this error. The only two things that come to my mind: You need Windows Vista or 7 for the SDK and you should try a hard reset on your device (backup your data before of course).
anon1811 said:
I'm sorry to hear that, but I can't help you with that since I don't have this error. The only two things that come to my mind: You need Windows Vista or 7 for the SDK and you should try a hard reset on your device (backup your data before of course).
Click to expand...
Click to collapse
Same error here.
I got a Venue Pro yesterday. I purchased it on eBay. Hooked it up to perform updates and I couldn't. I constantly get error code 80070002
I have tried it now on two PCs on two different networks, one running Win 7 and the other running Win 8. I have looked on the net but can't really find anything helpful.
Anyway, never having had the phone before I found it odd that it came with a call and message history. Even after I reset the phone it still has a history, pictures of people from Facebook with pictures that are obviously professional shots. All messages are from people each other how great their new Windows phone is.
Also, if I don't use the phone for a couple of minutes it starts a phone demo video/slide show. I am now thinking I have a demo OS even though I can make calls and surf the net. Current OS is 7.0.7004.0
What can I do to totally wipe this phone and start from blank?
Thanks
You'll probably have to follow the instructions in "How to unbrick a Dell Venue Pro." No way to change a demo ROM into a retail ROM. You need to flash the retail ROM and start over.
If you still have the original rom installed on it, could you:
run the emapp tool and write down the contents of what it has?
As far as dell is concerned, I dont believe they normally make demo specific roms.
But that is in reference to their android devices and MS might have had them make an exception for the VP (and it's WP7)
TheManii has a thread over here where he's collecting this data.
Dial ##634# to enter the hidden Engineering Mobile menu.
http://forum.xda-developers.com/showthread.php?t=1479233
Thanks to all who replied. I got it fixed. It was indeed some weird demo ROM or setting but its all cleared up now. I used the unbricking thread listed here
http://forum.xda-developers.com/showthread.php?t=1411300
and downloaded the ROM from here
https://skydrive.live.com/?cid=4da87ed18e0bf92d&resid=4DA87ED18E0BF92D!7216&id=4DA87ED18E0BF92D!7216
I got the UpdateWP too from here
http://forum.xda-developers.com/showthread.php?t=1262471
Only thing to note is to extract the UpdateWP folder and put both files in to the Zune directory on your PC.
After that everything went relatively smoothly. It took 2 or 3 tries to get the Retail ROM to take and from there the phone updated perfectly until Mango. It failed but I just disconnected USB and reconnected and it ran the update.
Thanks again
Same boat
edderspcs said:
Thanks to all who replied. I got it fixed. It was indeed some weird demo ROM or setting but its all cleared up now. I used the unbricking thread listed here
http://forum.xda-developers.com/showthread.php?t=1411300
and downloaded the ROM from here
https://skydrive.live.com/?cid=4da87ed18e0bf92d&resid=4DA87ED18E0BF92D!7216&id=4DA87ED18E0BF92D!7216
I got the UpdateWP too from here
http://forum.xda-developers.com/showthread.php?t=1262471
Only thing to note is to extract the UpdateWP folder and put both files in to the Zune directory on your PC.
After that everything went relatively smoothly. It took 2 or 3 tries to get the Retail ROM to take and from there the phone updated perfectly until Mango. It failed but I just disconnected USB and reconnected and it ran the update.
Thanks again
Click to expand...
Click to collapse
Hi, I just got a phone in the same conditions you have had mention(demo mode), and I thought I have done and taken the same steps to flash my device, but with not avail, the skydrive file has been removed, and I was wondering if you maybe still have them(the files) somewhere and if I could "borrow" them. I mean I think I have the right ROM and the UpgardeWp, but maybe they are the wrong ones, because is NOT working for me.
Thank you very much and I hope you have a fantastic evening.
Israel
*UPDATE* never mind, I was able to do a proper flash, and now I have a good working Windows Phone...
Israel
edderspcs said:
Thanks to all who replied. I got it fixed. It was indeed some weird demo ROM or setting but its all cleared up now. I used the unbricking thread listed here
http://forum.xda-developers.com/showthread.php?t=1411300
and downloaded the ROM from here
https://skydrive.live.com/?cid=4da87ed18e0bf92d&resid=4DA87ED18E0BF92D!7216&id=4DA87ED18E0BF92D!7216
I got the UpdateWP too from here
http://forum.xda-developers.com/showthread.php?t=1262471
Only thing to note is to extract the UpdateWP folder and put both files in to the Zune directory on your PC.
After that everything went relatively smoothly. It took 2 or 3 tries to get the Retail ROM to take and from there the phone updated perfectly until Mango. It failed but I just disconnected USB and reconnected and it ran the update.
Thanks again
Click to expand...
Click to collapse
Hi
I am trying to do the same thing. But when I click the sky drive link to download the rom , there is nothing there. It asks me to login to windows live and thats it. Do you still have this rom downloaded and can you email it to me? OR where can I find this rom? Plz help.
In the middle of the "how to unbrick your dell venue pro" the rom is posted, on some russian download site.
http://forum.xda-developers.com/showpost.php?p=22415484&postcount=35
That file is hosted on my skydrive, and it is still available. It may be asking you to log in to your windows live account to access it. Not sure.
I got it ! Thank you so much!!!!!!!!!!!!!!!!!!!!!!!!!!!!
edderspcs said:
Thanks to all who replied. I got it fixed. It was indeed some weird demo ROM or setting but its all cleared up now. I used the unbricking thread listed here
http://forum.xda-developers.com/showthread.php?t=1411300
and downloaded the ROM from here
https://skydrive.live.com/?cid=4da87ed18e0bf92d&resid=4DA87ED18E0BF92D!7216&id=4DA87ED18E0BF92D!7216
I got the UpdateWP too from here
http://forum.xda-developers.com/showthread.php?t=1262471
Only thing to note is to extract the UpdateWP folder and put both files in to the Zune directory on your PC.
After that everything went relatively smoothly. It took 2 or 3 tries to get the Retail ROM to take and from there the phone updated perfectly until Mango. It failed but I just disconnected USB and reconnected and it ran the update.
Thanks again
Click to expand...
Click to collapse
hi All,
i got a working DVP after doing all steps mentioned in "How to unbrick DVP" after that when i connect my phone to Zune i am getting below error and i am not able to do anything with my phone (data tranfer,update, app install etc), please help meif you can:
ERROR: "RESTORATION ERROR" An error prevented the restoration of your phone to its previous verion.
ERROR CODE: C101002E
i have performed everything that is posted in XDA-developer about this error and when i tried to update/restore/backup from command promt using .cab file i got below error:
Id: \\?\usb#vid_045e&pid_0710#0a1846cd-8203-1781-bc2a-de1974852ebc#
{ca3d7387-f67b-11da-bbec-8000600fe800}
SN: cd46180a - 03828117 - bc2ade19 - 74852ebc
Name: Venue Pro
KITLName: QSD8XXX82BDB791
Manufacturer: DELL
ModelId: 1
Model: Venue Pro
MobileOperator:
Version: 07.00.07004.00-00000
Djha said:
hi All,
i got a working DVP after doing all steps mentioned in "How to unbrick DVP" after that when i connect my phone to Zune i am getting below error and i am not able to do anything with my phone (data tranfer,update, app install etc), please help meif you can:
ERROR: "RESTORATION ERROR" An error prevented the restoration of your phone to its previous verion.
ERROR CODE: C101002E
Click to expand...
Click to collapse
First thing I'd do is do a soft reset if you just flashed the stock 7004 ROM.
Windows Phone > Settings > About > Reset your phone.
Then, just a guess -- go into Zune Desktop > Settings > Phone > Sync Options > [Forget this phone]
Then plug the phone again and see if it lets you set it up as a new device, with update check.
If this doesn't work, the next thing I'd try is moving to another Windows machine, installing a fresh copy of Zune Desktop, and seeing if it will let you update using that. You could also use a Windows installation in virtualization using virtualbox, or an installation on another partition if you are an advanced user.
Basic troubleshooting. Just floating ideas.
Nothing worked
Technosquid said:
First thing I'd do is do a soft reset if you just flashed the stock 7004 ROM.
Windows Phone > Settings > About > Reset your phone.
Then, just a guess -- go into Zune Desktop > Settings > Phone > Sync Options > [Forget this phone]
Then plug the phone again and see if it lets you set it up as a new device, with update check.
If this doesn't work, the next thing I'd try is moving to another Windows machine, installing a fresh copy of Zune Desktop, and seeing if it will let you update using that. You could also use a Windows installation in virtualization using virtualbox, or an installation on another partition if you are an advanced user.
Basic troubleshooting. Just floating ideas.
Click to expand...
Click to collapse
Thanks for your reply.
1. when i clicked on "Desktop > Settings > Phone > Sync Options >" it shows "connect a device" and i am not able to connect my phone becouse after error pop-up, there is only one option "close" and after click on close zune shows "no device connected".
2. i have already tried it on 2 PCs, suggest me other option please.
Djha said:
Thanks for your reply.
1. when i clicked on "Desktop > Settings > Phone > Sync Options >" it shows "connect a device" and i am not able to connect my phone becouse after error pop-up, there is only one option "close" and after click on close zune shows "no device connected".
2. i have already tried it on 2 PCs, suggest me other option please.
Click to expand...
Click to collapse
If you've also tried doing the soft reset as I mentioned, you may want to see if you can use the cab sender method to update to one of the nodo builds.
http://forum.xda-developers.com/showthread.php?t=1306415
A couple quick questions --
Was this your phone and had it been working previously, or was it in this "connect to PC screen" state when you got it?
Can you think of anything you might have done to cause it to stop working?
Is it the AT&T, T-Mobile, or EU/International version?
Did you use a non-english language cab?
Answers:
Technosquid said:
If you've also tried doing the soft reset as I mentioned, you may want to see if you can use the cab sender method to update to one of the nodo builds.
http://forum.xda-developers.com/showthread.php?t=1306415
A couple quick questions --
Was this your phone and had it been working previously, or was it in this "connect to PC screen" state when you got it?
Can you think of anything you might have done to cause it to stop working?
Is it the AT&T, T-Mobile, or EU/International version?
Did you use a non-english language cab?
Click to expand...
Click to collapse
1. yes, i tried a soft reset(resetting the phone from settings->about phone->reset phone) even also perform a soft reset without SD card and try to update from zune without SD card but still getting same restoration error.
i already tried all options cab sender, mangoforall 0.2 etc/ update and restore from command promt:
getting below error everytime whenever i tried to perform any thing from command promt(.bat) :
Error: Exception from HRESULT: 0x801812C0
Call stack:
at wm7update.Program.UpdateDevice(IDeviceInfo deviceInfo, List`1 updates, Upd
ateType type)
at wm7update.Program.Main(String[] args)
2. this is not my phone i got it in a non working state showing "SD card not working".. then i performed steps mentioned in "how to unbrick DVP". after that i got a working DVP.
3. It is a T-mobile DVP and sim unlock by unlock code provided by dell.
4. It is on 7004 Tmobile ffu no cab update til now, as i am not able to send any cab via cab sender.
Note: i don't have any previous back-up of this mobile and not sure wheather the SD card is original or not.
First of all, sorry if there's already threads explaining this, I couldn't find them.
I just updated my Samsung Focus to 7.8 using the SevenEighter, was so easy, just a click and it made all the 5 updates automatically to my phone, amazing :laugh:
Now the problem is, I lost my "jailbreak" or unlock, I dont how it's correctly called in WP. I suddenly got my unlocked apps revoked with little messages that appeared saying so. Is there any way to keep having the unlock in WP 7.8?
Thanks!
PabloW92 said:
First of all, sorry if there's already threads explaining this, I couldn't find them.
I just updated my Samsung Focus to 7.8 using the SevenEighter, was so easy, just a click and it made all the 5 updates automatically to my phone, amazing :laugh:
Now the problem is, I lost my "jailbreak" or unlock, I dont how it's correctly called in WP. I suddenly got my unlocked apps revoked with little messages that appeared saying so. Is there any way to keep having the unlock in WP 7.8?
Thanks!
Click to expand...
Click to collapse
You should be able to simply redo the unlock. I followed the instructions on this thread http://forum.xda-developers.com/showthread.php?t=1271963
In brief
1. Install Windows Phone SDK (I updated it to support WP7.8) - note that this is a big file from Microsoft
2. Download Interop Unlock by Heathcliff74 v2.xap
3. Connect phone and start Zune. Use the Deployment Tool from the SDK (mine is located in Program Files\Microsoft SDKs\Windows Phone\v7.1\Tools\XAP Deployment) to deploy the interop to your phone
4. Disconnect phone and start the unlock
5. Once successfully unlocked, use the Samsung Network Profile app to ensure everything works (e.g. MMS, data, etc)
takawira said:
You should be able to simply redo the unlock. I followed the instructions on this thread http://forum.xda-developers.com/showthread.php?t=1271963
In brief
1. Install Windows Phone SDK (I updated it to support WP7.8) - note that this is a big file from Microsoft
2. Download Interop Unlock by Heathcliff74 v2.xap
3. Connect phone and start Zune. Use the Deployment Tool from the SDK (mine is located in Program Files\Microsoft SDKs\Windows Phone\v7.1\Tools\XAP Deployment) to deploy the interop to your phone
4. Disconnect phone and start the unlock
5. Once successfully unlocked, use the Samsung Network Profile app to ensure everything works (e.g. MMS, data, etc)
Click to expand...
Click to collapse
I am trying to make 3rd step but the deployer gives me this error: 0x89740006. And if I try to do it with the screen unlocked it gives me 0x89740005
any ideas?
Thanks!