Database Users

Mmmm toasty - 8GB SD Card appears to be FUBAR.

It started with I repartitioned it using the Aman RA recovery "Part SD: fat32+ext2+swap" and flashed a Hero ROM. It worked fine. When I wiped and restored CM 4.1.999 (nandroid) I couldn't get to any of my programs or anything else on the SD Card. After some wiping and some trial and error I said screw it and re-formatted (via Windows) and re-partitioned my card via recovery. Again, I couldn't access any of my programs or the card.
I can format the card as one 7.x GB partition and it seems to be OK, but when I try to partition into fat23+ext2+swap via recovery (or any combination of more than one partition using Paragon Partition Manager) it is rendered unusable. If I re-mount it to my computer I get that the drive is not formatted.
If I format it it to one partition and then try to create multiple partitions via Paragon I get "A new partition cannot be created on this hard disk. Most probably, all primary slots are occupied and there is no extended partition."
Any ideas?

nolageek said:
It started with I repartitioned it using the Aman RA recovery "Part SD: fat32+ext2+swap" and flashed a Hero ROM. It worked fine. When I wiped and restored CM 4.1.999 (nandroid) I couldn't get to any of my programs or anything else on the SD Card. After some wiping and some trial and error I said screw it and re-formatted (via Windows) and re-partitioned my card via recovery. Again, I couldn't access any of my programs or the card.
I can format the card as one 7.x GB partition and it seems to be OK, but when I try to partition into fat23+ext2+swap via recovery (or any combination of more than one partition using Paragon Partition Manager) it is rendered unusable. If I re-mount it to my computer I get that the drive is not formatted.
If I format it it to one partition and then try to create multiple partitions via Paragon I get "A new partition cannot be created on this hard disk. Most probably, all primary slots are occupied and there is no extended partition."
Any ideas?
Click to expand...
Click to collapse
I just recovered mine from this the other day...when I went into parted it was not showing the label of "primary" which was signifying it was not actually an initialized partition....even though I told it mkpartfs primary fat32 and put the parameters for it...
My fix was to use my Mac and format it to FAT standard (not FAT32) which allowed it to be seen in my Vista machine downstairs....when I insert it asked to format and I said no (as it would only format 200MB and leave the other 7.6GB unusable) and went into Manage under My Computer (right click, choose Manage) then went down and right clicked the SDHC card and chose to format it to FAT32..which it did.
Put the memory card back in the phone, went back to parted and redid my partitions and they showed the "primary" label as they should...took card out of the phone, put back in the Mac and copied over the zip I wanted to flash to the FAT32...put back in the phone and flashed with Amun-RA 1.2.3

why dont you partition using gparted on the G1? try formatting it within windows first, and then using the gparted method. it may work, may just have been a bad format/partition the first time.

palosjr said:
why dont you partition using gparted on the G1? try formatting it within windows first, and then using the gparted method. it may work, may just have been a bad format/partition the first time.
Click to expand...
Click to collapse
I've used sdpart in the recovery. I thought that used gparted?

I also had this problem with Paragon, I formatted the card and partitioned using gparted boot cd. Works great now.

[Q] Upgrading from 4gb sd to 8th sd?

So all i want to do is take everything off my 4gb sd card and use an 8gb sd card so that I have more storage space. Everything works great as is, and I wanted to keep everything as is. Just need more storage space. I've looked through the forums and haven't found anything that addresses this process. I am running CyanogenMod 7.0.3 w/a 4gb sandisk micro sd card. How do I copy so that it boots just like my 4gb card???? Thanks ahead of time for any help.

Bambam01 said:
So all i want to do is take everything off my 4gb sd card and use an 8gb sd card so that I have more storage space. Everything works great as is, and I wanted to keep everything as is. Just need more storage space. I've looked through the forums and haven't found anything that addresses this process. I am running CyanogenMod 7.0.3 w/a 4gb sandisk micro sd card. How do I copy so that it boots just like my 4gb card???? Thanks ahead of time for any help.
Click to expand...
Click to collapse
I recommend just writing an image file with winimage. Then writing it to a 8gb card, then using Easeus Partition manager to expand the last partition to full 8 gb.'

Do you boot from the SD card or eMMC?
If it's the latter, just copy the contents of the old card to the new one.
If it's the former, I recommend a fresh install; use a backup program (MyBackup, Titanium Backup) to back up your Apps and Data and then restore when you're done with the fresh install.

I'd like to do this as well.. in response to previous reply.. there are 4 partitions (boot, 2 other and last one with your data) do I have to create 4 different images with winimage or just for the first boot partition or does the winimage creates the image of the whole msd card?

The winimage will create a 4 gb image of your card on the 8 gb cards including existing partitions. What you'll need to do is get the largest partition to expand to the whole card. Assuming that the 4gb install on SD is the same as an 8 gb install if you did it fresh.
If the partitions are set different for 8 gb on a fresh install, you're better off just doing a fresh install and use titanium backup as the other guy said.

Phatdawg said:
If the partitions are set different for 8 gb on a fresh install, you're better off just doing a fresh install and use titanium backup as the other guy said.
Click to expand...
Click to collapse
That's a good point, the Size-agnostic SD installer uses different partition sizes for everything except the boot partition depending on the size of the card.

I tried winimage first to see if it even worked. Which it didn't. I didn't try to expand the existing partition. It just booted as a normal nook. You would think this would be a easy process but.... Lol, always new challenges. Guess that's why I enjoy doing this.

Well I tried yet again w image, expanded the partition. Still. Didn't work. I must be missing something. How hard can it be to make a copy of a bootable card? Must b brain dead today! Any other thoughts? Thanks!

Bambam01 said:
Well I tried yet again w image, expanded the partition. Still. Didn't work. I must be missing something. How hard can it be to make a copy of a bootable card? Must b brain dead today! Any other thoughts? Thanks!
Click to expand...
Click to collapse
I have done this several times, and I recommend downloading easus todo backup free. Then place both sdcards in a card reader, run todo backup and just copy the 4g to the 8g and expand the fourth partition right there in todo.
This applies especially if you want to copy to same size sd's, as you will not run into the usual image sizing issues.
Hope this helps

I don't know what you're doing wrong. before expanding the partition, make sure the sd boots, if it doesn't, then there's a problem with image being read or written as opposed to the partition.

I also had a problem with a new SD card not booting that I fixed by using the nook (that is the core nook OS) to reformat the card, then put the image onto the SDcard (shouldn't have changed anything as far as I know, but it did anyway).

Ok I tried this and it worked flawlessly. Used win32diskimager to "read" my 4gb sd with cm7 image. and then used "write" to 8gb sd card. It cloned 4 gb original image with 4 partitions and one unused partition of 4 gb. After that used easeus partition manager(latest version) to format unused pattition to fat32 and then merged with last partition of 2gb (move/resize) ..so now I have 6 gb of data partition which i can use to transfer files or move apps from nook's internal drive. The new 8gb card with cm7 image booted without any issues keeping my original settings of 4gb. One thing to mention that somehow it did not work on one pc with windows xp (kept getting write error on win32diskimager program)but worked on my laptop with windows 7.

That is exactly how I have done it in the past as I described in my first post. I don't know why a person would have trouble with it unless there was a format issue (i.e. ntsf, etc).

[Q] Creating bootable SD card size issue

Hi all,
It seems that I'm having a bit trouble with writing the image to my SD card. I'm using a 16GB currently with Honeycomb on it, but after the image finished writing, my card size is reduced to 105MB free out of 150MBish. I tried to get the CM7 boot to work on a 2GB card, after the "generic" img finished writing on the card, it gets the same free 105MB, and I can't copy the CM7 files onto the card because those files are 115MB total.
I tried partitioning the card but it's still the same, and the computer isn't able to see the second partition that's not the main one. Is anyone having this issue and/or know how I can fix it? Much appreciated.
Cheers,

kzn said:
Hi all,
It seems that I'm having a bit trouble with writing the image to my SD card. I'm using a 16GB currently with Honeycomb on it, but after the image finished writing, my card size is reduced to 105MB free out of 150MBish. I tried to get the CM7 boot to work on a 2GB card, after the "generic" img finished writing on the card, it gets the same free 105MB, and I can't copy the CM7 files onto the card because those files are 115MB total.
I tried partitioning the card but it's still the same, and the computer isn't able to see the second partition that's not the main one. Is anyone having this issue and/or know how I can fix it? Much appreciated.
Cheers,
Click to expand...
Click to collapse
Very much a known issue... to work around this:
1. Write the image to SD
2. Resize boot partition (only one on it so far) to anything up to 2 GB.. I recommend keeping it less than 2 GB for compatability
3. Put your ROM on the boot partition
4. Put SD in nook and boot it up

Hey thanks!
So for some reason I was able to follow this post and root my Nook http://www.informationweek.com/byte/howto/231002060
I used the 2GB card again and this time after writing the image to it I still have 1.75ishGB left and the file didn't take up the whole card like it did previously. Was able to boot up CWM and flash CM7.
But I'm running into another problem, which is my 16GB card, no matter how I format it, the Nook would not recognize that it's mounted. And when it does show up in the system, it only sees about 1.5GB, and the card is completely empty. I'm really stuck here, is this another known problem?

But I'm running into another problem, which is my 16GB card, no matter how I format it, the Nook would not recognize that it's mounted. And when it does show up in the system, it only sees about 1.5GB, and the card is completely empty. I'm really stuck here, is this another known problem?
Click to expand...
Click to collapse
What are you using to format it? What format, FAT32? What was on it before? What shows up when in a reader on your PC?

I used EASEUS and also just window to format the card. It's in FAT32 and my PC sees it as a removable storage device just fine, all 14.5GB of it.

LOL
Honestly, the OP does drive me nut
I want to help but I can't follow what he said.
16GB SD, 2GB SD, what?
If you, OP, still need help, then pls clearly indicate what your problem is and what you intend to accomplish.

kzn said:
I used EASEUS and also just window to format the card. It's in FAT32 and my PC sees it as a removable storage device just fine, all 14.5GB of it.
Click to expand...
Click to collapse
EASEUS does help a lot (ext4) but I would then suggest never using Windows to format a uSD. This works much better IMO to get a good format.

Error when writing to disk at sector #

I get this error when restoring my backed up img file of my microSD cardd.
I only have one SanDisk 8 GB class 6 microSD card. I backed it up to an image using Roadkil.
Wrote ClockWorkMod to it to install multi-touch and USB host support. After that, I used Easeus to delete the 128 MB partition (from burning CWM) to get back the whole capacity. Somehow Easeus leaves around 7 MB of it unallocated. I also tried Windows Disk Management to delete, allocate and format the partition.
Is there a way to resize an img file? I think the problem is due to the formatted capacity being some bytes smaller than the backed up img file. It writes up to 99.5% then gives me that error.

When you are "restoring" your backed up image to the SD card
you are using Win32DiskImager or something and not copying an .img file?
When you write an image to a disk it doesn't care about existing partitioning.
You only have to care about partitioning when you want to use your SD card for normal use again.

Hmm it worked without a hitch using Win32DiskImager. I tried so many times to write the img file to the microSD card using Roadkil.

[Q] Rooted Nook Simple Touch, Help Partitioning micro SD card

Hi! Successfully rooted my Nook ST using Nook Manager, except I used a 32 GB micro SD card to do the rooting. After rooting, I ended up with two partitions on the SD card, Nook (239 MB) and Nook Manager (62.9 MB). I was wondering what I need to do to be able to utilize the rest of the space on the card? The reason I bought a 32 GB card was so I could store all my sideloaded books there, and now I find I'm just limited to the space/partitions showing up when I connect the nook via USB.

You need to repartition your card.
Partition Magic can do that.
If you want to use multiple partitions on the SD card (like 2 x 16 GB) you might want to look at:
http://forum.xda-developers.com/showthread.php?t=2184495

Renate NST said:
You need to repartition your card.
Partition Magic can do that.
If you want to use multiple partitions on the SD card (like 2 x 16 GB) you might want to look at:
http://forum.xda-developers.com/showthread.php?t=2184495
Click to expand...
Click to collapse
Thanks, will download a copy of Partition Magic later. I really am completely clueless when it comes to programming though. In fact, I'm only here because the folks at mobileread told me I'd probably have better luck having my question/s answered here than there. So just to confirm, I can repartition the drive using partition magic so I'll have one extra partition for the books I want to sideload, and I'm good to go already when I re-insert the SD card into the Nook? Or do I have to attempt the code that you gave in the thread you linked?

If you want to have a single FAT partition on your SD card you can do that without much change.
It comes down to whether you want to be able to pull the SD card and plug it into random desktops and things.
If you want to have multiple partitions or ext3 partitions you will have to use the new vold in the link above.

if used windows 7,8. Insert a memory card into the card reader. Go to cmd(administrator mode) and run command:
Diskpart
List Disk
Select Disk 1 (#select sdcard)
clean (#clean partition sdcard)
create partition primary
active
format fs=fat32 quick
assign (#run command if not view sdcard in mycomputer )

Renate, I tried to repartition my SD card, but got a "disk is not formatted, do you want to format it now?" message. So I had no choice but to do a data recovery using EaseUs Partition Master first, then went ahead and clicked format now. Then I tried using Minitool Partition Wizard (couldn't find a free version of Partition Magic) to create new partitions in the formatted SD card so that the NookManager partition would be larger (27 GB) while the NookBackup partition would be 2 GB. Except that I can't seem to create any new partitions at all. And I also have no idea how to restore the data I'd backed up earlier either.

Sorry, I missed seeing this come up when you posted it.
When your Nook asks you if you want to format you should say "No!".
It could be that it misidentified the situation.
In any case, you want to look closer before formatting anything.
Here's a gotcha.
If you are using ext3 and the internal clock has reset itself then the last mount will be in the future.
That makes things angry. Check that the date/time on the Nook is correct.

You can use gparted to give the card the partition layout you need (i.e. first NookManager partition is big, second NookBackup partition is only large enough to hold a backup), then write the first partition from NookManager.img into first partition of the card (you need to do something roughly similar to this. Then you can use gparted to set the "boot" flag on the first partition and use the card to backup&root your Nook. Then remove the "boot" flag, and keep using the card for storage (it's a bit messy to have both user&app files AND NookManager boot files in the same place, but if you only have one card, then this is inevitable - i haven't found a way to mount the second or the third partitions from the card). The card will act as normal storage device when flag is not set, and as NookManager bootable card when flag is set.