[Q] Back to the Future [XBoxmod] ICS affects Bluetooth/WiFi - HD2 Windows Phone 7 Q&A, Help & Troubleshooting an

The latest CAB I installed from xboxmod for the the Back to the Future (7440) ROM enables Internet Sharing, however, Bluetooth and WiFi are now completely unstable. ICS seems to work consistently, but Bluetooth does not start anymore after the phone has been rebooted and in use for some time. A similar phenomena occurs with WiFi; it starts but cannot nor does not connect to any SSIDs.
Anyone else having these issues with this ROM?

Related

Wi-Fi can't connect

Just load Energy 23569 ROM onto my Touch HD Touch and everything seems ok except Wi-Fi .. i can't connect to my home Wi-Fi after keying in the authentication passcode .. it just keep showing Red icon of WiFi ... i'm not too sure if there something to do with the Advanced Config settings ...
I have the same issue.
How is this solved ??
Thanks
Ciao
Mike
i have problem with wifi too.phone cant see wifi network even whan i stand right next to router.one time phone found network, but only poor signal and i wasnt be able to connect. wifi goes well on another mobiles like SE X10 and samsung JET. i changed several roms but problem stays.. i dont know what to do..thx
Htc hd wifi problems
I just guess it´s some kind of incompatibility with certain WIFI APs.
I tried several other now:
Netgear 834 - complete catastroph
T-KOM 500WV - runs immediately
So I think it´s the best to change the router.
The device:
Speedport 500V is at least the one that does the job in my network.
Fritz (2 types I don´t know exactly but little older though), Netgear (834), Sparklan - these did NOT WORK
Speedport W500V- just basic setting (WEP 128Bit, ASCII) immediatlety connected to the HTC. Tested with WFI-MONSTER.
I think I´ll get a hold of some of these, they are pretty cheap (20 €) here now.
Hope it helped a little
Ciao
Mike
Hi Guys,
I had the same problem the entire week last week. I tried upgrading the radio, downgrading the radio, several different roms, until I finally realized what the cause was.
Wifi would work right after the first hard reset after flashing a new rom or radio, but I noticed that it wouldn't connect to any of my wifi routers after installing all my apps and restoring configurations.
I noticed that after enabling "WPA authentication" on Advanced Configuration, wifi would stop working. Leaving it disabled would let it work normally. I don't understand why, but there you go. I haven't had a problem with any router since.
Hope this helps.

[Update]Bluetooth Issue, freeze my TAB

hi
Im running the stock JK6 and rooted.
when Im running e.g. the liveview app my phone keeps some kind of freezing after a few minutes, first I tought it is app related but now I revieved my OBD2 scanner for my car and its just the same with the app "torque".
is this a hardware related problem or something wrong with this ROM.
did a HR several times and reflashed the ROM.
Edit: I noticed when bluetooth recieve or send data I cant get any other wireless date like on wifi or on radio.
please help
Seems to be a one time event with the data problem but the main thing keeps annoing me
Have you tried pulling the battery waiting 60 seconds placing the battery back in the phone and then rebooting?
Eh no cause on the galaxy tab the battery cant be removed
NightFire123 said:
hi
Im running the stock JK6 and rooted.
when Im running e.g. the liveview app my phone keeps some kind of freezing after a few minutes, first I tought it is app related but now I revieved my OBD2 scanner for my car and its just the same with the app "torque".
is this a hardware related problem or something wrong with this ROM.
did a HR several times and reflashed the ROM.
Edit: I noticed when bluetooth recieve or send data I cant get any other wireless date like on wifi or on radio.
please help
thanks
Click to expand...
Click to collapse
I don't Know, but if you have a Bluetooth PAN connection to the internet, then it should be not possible to have another connection to the internet. IP routing to the gateway would be confused if you could.
There are tools that "group" several separate internet connections into one virtual one.
no Im not using a bt PAN to connect the inet, only normal bluetooth data usage
Push
Just only me who is facing this annoing problem?
Same problem with OBD2 :s disable GPS reduc freeze loop. But not fully (30 minutes). Next time i will turn off Data conection.
Every time i've freeze now i see torque try reconnect to OBD2, seem like BT of SGT turned off or time out
I am having the same problem. As long as I have bluetooth turned on, it will hang the Tab within 30 min. All bluetooth connections are definitely gone. Turning off the bluetooth won't help. The only way is to reboot and never turn bluetooth on.
BTW, I have tried connecting LiveView or a normal bluetooth headset. Both cause the same problem.
I am on JK2.
It seems it is bluetooth driver conflicting with any other data connections.
Did a further testing. Disabled Wifi, but doing data communication via 3G network while turning bluetooth on. The tab hangs in a few minutes. Found a process called 'btld' sucking up all the CPU circle.
Any ideas what 'btld' is?
Thought this should not be a hardware problem because bluetooth works fine when all data connections are off and Wifi/3G data works fine when bluetooth is off. It must be some sort of default setting isn't correct. If this is the case, then root would be a must before manually tuning any parameters.
Found root cause. It is actually the SonyEricsson LiveView software causing troubles. After removing, everything goes well.
Checked on SonyEricsson's web site, it seems Froyo is yet to be supported.
try to use WO Webcam B-Lite out of market, you can open a bt connection by pressing activate and then while running, close via taskmanager, voila the freeze begun
I've got galaxy Tab and galaxy S, and torque badly freezes the devices almost every time I exit the application. It cannot be an hardware fault since I use lot of bluetooth devices and always 3g connected, never had issues. Just with torque, and I don't have any "sony liveview" thing.
Reading on the comments of Torque it seems that also other devices have the same freeze issue (especially a phone called "Evo 4G"). Many months ago I sent a mail to the developer explaining the bug but he bumped me away replying that the app is tested and working on GalaxyTab (and obviously it's not true, or he did some mistake in testing). Now lots of people with this Evo 4G are complaining and the developer is trying to fix. let's hope..

[Q] Problems with WiFi and data connection

Hello
Sometimes when i have wifi and data enabled at the same time, my internet connection stops working.
But if i disable wifi or data i will get my connection back. Even just cycling wifi make it work for some time again.
Is anyone else experiencing this problem? Or does anyone have a solution?
I have been reading around and think it may have something to do with Internet Sharing and Interop-unlock.
i had the exact same problem, but worse. i had to switch to airplane mode and back to get internet working. and it was a very frequent and annoying problem.
for me updating to 8107 over zune was the solution. no more connection issues.
(internet sharing however i do not have anymore - but as you said, it could be related to this -so screw it i don't share my internet if it crashes mine )
This is a very common fault (there are several threads on the topic.)
Call Samsung support and ask them to get of their asses and fix the problem. I called and they said that they had no other report on that same problem..
Have the same problem, but I have to restart my phone for it to start working again. *__*

Bluetooth and Nexus4 issues and observation

Ok so i got my Nexus 4 yesterday and of course BT (Motorola Elite Silver) connects and then within 3/4 seconds will disconnect and it does this continuously. I really need BT to work. I have flashed cm10.1-rc4, night-lies and other roms as well and the same problem persists. I went to three, thats right three T-Mobile stores today and tested the same BT on their phone and it worked flawlessly. One of the Nexus 4 had Android 4.2 (JOP40C) and base-band .33 while the other two had 4.2.2 and base-band .48. Wifi was ON on all these devices and i did not notice and issue with them. My BT stayed connected for over 5mins and i even turn it on/off as well as the BT toggle on the phone and every time it worked without disconnecting or exhibiting any issue. I should also mention that i have flashed base-band .33 and the problem still exists. Does anyone know where i can download a dump of the Nexus 4 for t-mobile?
Is it possible that i have a faulty hardware?
Is there a way to unload the BT stack and reload it to test?
I did discover that when i connect the phone to my computer and the "usb debugging connect" message shows up, the BT/WIFI does not disconnect and works as normal. Now if i disconnect the cable it starts acting up again. Maybe a dev here will be able to figure it out now but that is the behavior i have noticed all through out my testing.
PS: i also have a BlueAnt Q2 and it does connect and sometimes disconnects. WIFI when the BlueAnt Q2 is connected becomes really unstable and disconnects.
Are you undervolting? Any custom kernels? If not, try flashing one. Does it work fine with WiFi off?
lopezk38 said:
Are you undervolting? Any custom kernels? If not, try flashing one. Does it work fine with WiFi off?
Click to expand...
Click to collapse
No, i am not undervolting. I have tried CM10.1 nightlies and RC4. Even with WIFI off the problem still continues. I am trying to download google 4.2.1 and see if it still a problem.
I use a Bluetooth headset too, and from what I know, in many ROMs, Bluetooth does not work well with WiFi. If both is on, my WiFi will definitely lose connectivity, and/or my Bluetooth will lose connectivity. Either way, they just cannot coexist together.
Turning off my Wi-Fi is the only way I can get my Bluetooth to work.
I think our units are defective. I already called Google and they are sending NEW replacement out to me asap. I don't get how the t-mobile store once worked. The weird part about mine is if the phone is connected to my PC, it works fine. I just can't figure it out.
Tested another one today and it worked flawlessly.

[Q] WiFi works fine but takes ages to reconnect after falling back to 3G data

Hi all
I've been running CM 10.2 for a while and had no problems with it, but wanted to upgrade to Kit Kat so I flashed CM 11 via the Installer apk. Everything works great except I'm finding that if I go out of WiFi range and the phone falls back to 3G data, it won't reconnect to WiFi when I come back within range (e.g. when I get home from being out). Further details:
- manually reconnecting through settings DOESN'T work... it sees the networks but hitting 'connect' does nothing
- disabling the modem entirely via flight mode and then re-enabling DOES work... WiFi reconnects automatically
- the phone WILL reconnect by itself without flight mode but only after quite a long while
Anyone else experienced this behaviour and know of a fix?
Thanks!

Categories

Resources