Stucked in "android system recovery 3e" - Huawei Ideos X5 U8800

Hi there!
I am stucked in "android system recovery 3e"
Cannot do nothing.
If i choose some ROM zip packages i get:
>>E:signature verification failed
>>Instalation aborted
I tried with various clockwork (4.0.0.6, 5.0.23 or so) recovery's but cannot get into it after reboot.
So no go to install neither ROM
I tried with "dload" folder with B162,B138, GB 2.3.5 Overseas... stucked in "Unpacking" windows forever...
Anyone has a solution for this s**t?
Brgds,
S.

Did you try this (copy pasted from another thread)
Originally Posted by itsmeena
Mine got bricked once and followed this got it back.
http://forum.xda-developers.com/show...28&postcount=4.
Hopefully it will help you to get things better

When i click on link is says "Page not found".
Can you re-post it?
I tried several "solution" but nothing has work

mesnati said:
When i click on link is says "Page not found".
Can you re-post it?
I tried several "solution" but nothing has work
Click to expand...
Click to collapse
Well it was this one but I guess you already tried it:
http://forum.xda-developers.com/showpost.php?p=18944228&postcount=4

mesnati said:
Hi there!
I am stucked in "android system recovery 3e"
Cannot do nothing.
If i choose some ROM zip packages i get:
>>E:signature verification failed
>>Instalation aborted
I tried with various clockwork (4.0.0.6, 5.0.23 or so) recovery's but cannot get into it after reboot.
So no go to install neither ROM
I tried with "dload" folder with B162,B138, GB 2.3.5 Overseas... stucked in "Unpacking" windows forever...
Anyone has a solution for this s**t?
Brgds,
S.
Click to expand...
Click to collapse
For change a recovery I change always recover.img on /cust_backup/image/recovery.img
In have installed the 5.0.2.6 but I have also in this folder one recover4015.img and one recovery5023.img. When I want I rename them... Is from here that the recovery is charged on boot at each restarting or rebooting.

If you tried to help me ... you didn't unfortunately
My phone is still soft bricked
Has anyone find the solution for this?

mesnati said:
If you tried to help me ... you didn't unfortunately
My phone is still soft bricked
Has anyone find the solution for this?
Click to expand...
Click to collapse
Sorry, I doesn't remember on that.
I made this because I'm rooted and whit the Root Explorer.
For your case I don't know. Sorry.

mesnati said:
Hi there!
I am stucked in "android system recovery 3e"
Cannot do nothing.
If i choose some ROM zip packages i get:
>>E:signature verification failed
>>Instalation aborted
I tried with various clockwork (4.0.0.6, 5.0.23 or so) recovery's but cannot get into it after reboot.
So no go to install neither ROM
I tried with "dload" folder with B162,B138, GB 2.3.5 Overseas... stucked in "Unpacking" windows forever...
Anyone has a solution for this s**t?
Brgds,
S.
Click to expand...
Click to collapse
did you try to disable signature verification in cwm...idk if it has option in...but on my g3 i can disable signature verification for update.zip's and such....

rkkoby said:
did you try to disable signature verification in cwm...idk if it has option in...but on my g3 i can disable signature verification for update.zip's and such....
Click to expand...
Click to collapse
It doesn't have that option to disable verification

So anyone with the same problem?

I've sent phone to warranty

mesnati said:
I've sent phone to warranty
Click to expand...
Click to collapse
And i get the new one

Related

Cant install uk update

hey guys
Ive seen this uk update on a us phone without root http://androidcommunity.com/forums/f7/download-u-k-cupcake-for-u-s-users-17865/
And I just dowgraded my phone to root it but was unsuccessful..
When I try to install it i get
"Verifying update package
E: No signature(409 files)
E: verification failed"
What should I do?
also, is there an easier way to install an updadte of 1.5? I search but all this confuses me.
ok guys, I just want to go back to rc33... sombody please help.
Did you read this thread first? you know the one that says "read first"?
http://forum.xda-developers.com/showthread.php?t=442480
yes sir I did... It wont allow me to input that stuff into telnet... No matter how many times i reflash and download telnet. or type telnetd with that on m sd card..
I just want the stock image flashed on my phone.... im stuck with rc29
????
????
????
when I try to reinstall rc33 I get the same error
When I try to install it i get
"Verifying update package
E: No signature(388 files)
E: verification failed"
I cant update anything
lovemy318 said:
when I try to reinstall rc33 I get the same error
When I try to install it i get
"Verifying update package
E: No signature(388 files)
E: verification failed"
I cant update anything
Click to expand...
Click to collapse
really? I cant get any help at all?
lovemy318 said:
really? I cant get any help at all?
Click to expand...
Click to collapse
so first: you can't install the UK update on your root'd phone .. second: to use the update.zip files on XDA you need to have root .. so what is it exactly you are attempting to do?!?
flash either the RC7 or RC29 nbh file .. now if you do nothing at all you should receive OTA updates .. you can directly download the updates i believe from google .. these are all non-root versions .. or .. root your phone
http://files.lucidrem.us/jf/ROOT/g1_root.txt

Noob trying to learn how to flash roms

Ok guys, not sure if this should be in General or in here...
I am very new to Android but I'm loving it so far. I have my Epic rooted and I have the clockworkmod installed. I have download Tha Boss Rom V.02 to try out as my first ROM.
I just a few questions?
I have the ROM on my sd card and I renamed to update.zip(not sure if I needed to do that)... I then open up clockwork and hit update ROM from SD Card, point it at the update.zip.
It reboot and goes into the Android system recovery screen and starts to install the package. It gets to Verifying update package and stops and say:
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted.
What am I doing wrong. Do I just have a bad file and maybe redownload it? I think I may try Andromeda Galaxy v1.0.3 next just to see if it's a file issue...
Thanks if you took the time to read this.
Solstone
Boot ypur phnoe into clockwork recovery (vol. down + camera + power) then select "install zip from SDcard". then "choose zip from SDcard" then select the update.zip file.
solstone said:
Ok guys, not sure if this should be in General or in here...
I am very new to Android but I'm loving it so far. I have my Epic rooted and I have the clockworkmod installed. I have download Tha Boss Rom V.02 to try out as my first ROM.
I just a few questions?
I have the ROM on my sd card and I renamed to update.zip(not sure if I needed to do that)... I then open up clockwork and hit update ROM from SD Card, point it at the update.zip.
It reboot and goes into the Android system recovery screen and starts to install the package. It gets to Verifying update package and stops and say:
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted.
What am I doing wrong. Do I just have a bad file and maybe redownload it? I think I may try Andromeda Galaxy v1.0.3 next just to see if it's a file issue...
Thanks if you took the time to read this.
Solstone
Click to expand...
Click to collapse
This should be in the general forum- but are you sure you are getting the clockwork recovery- the screen should be green not blue- you can pm me for step by step help
jimmyz said:
This should be in the general forum- but are you sure you are getting the clockwork recovery- the screen should be green not blue- you can pm me for step by step help
Click to expand...
Click to collapse
ah the screen is blue... so maybe my clockworkmod is not working... i'll PM you... thx
please post everything you learned i cant boot to clockwork either.
I was able to get into the loading screen but I am getting the same error that it cant be verified
Did you use the voodoo touch wiz file?
Himmad said:
Did you use the voodoo touch wiz file?
Click to expand...
Click to collapse
i did use the vodoo touch... maybe i'll try the non touch one.
it seems like you guys dont have clockmod installed correctly. are you guys doing the one click method for root and clockmod? do any rooted apps work? dl rom manager from the market. use that to install the newest clockmod recovery. make sure you selet the samsung epic. use rom manger to boot into recovery? it should be green not blue
I was having a similar problem booting to cwm from rom manager. Rooted with one click 2.2.4 then one click clockwork final then installed rom manager. RM would not boot into cwm. Dled and flashed cwm from inside RM and still didn't work. I could get to it via the 3 button method. Next I flashed Mixup kernel and still had the same issue. Went back into RM and clicked DL Clockwork again and it instantly says its successful and now I can boot into cwm from RM.
Could somebody please make (or HAS somebody made) a guide that addresses the following two scenarios? I think it would go a LONG way towards encouraging others to experiment with the ROMs that are available now
1. My phone's rooted. I want to experiment and try out the available ROMs... but first, I want my phone backed up verbatim, so I can put everything back the way it was if things don't work out. What do I need to do?
2. I had fun trying out other ROMs, but for now I just want to put everything back the way it was before I started. I followed the instructions for #1. What do I need to do NOW?
Ok all this what I found was my problem. I believe it was Windows 7 64 bit. I tried to get clockworkmod running on my work machine that is windows 7 32bit and it worked like a champ. I actually decided to start from scratch and unrooted my phone, reapplied the DI07 update then rooted again, did the clockworkmod first try... then I did the last try.bat and rebooted and that seemed to work. I am doing a ROM back as I type this.
There is a good thread on it in the Epic Android Development forum called:
[TUTORIAL] Updating to DI07, Obtaining Root, and Flashing Custom Recovery [FIX]
I'd post a link, but I am a new user... and so no links in post
Hope this helps everyone.
Can someone post a link? I did use search, turned up a million (yes, I am exaggerating) threads but can't find this one.
Thanks.
nmoreman said:
Can someone post a link? I did use search, turned up a million (yes, I am exaggerating) threads but can't find this one.
Thanks.
Click to expand...
Click to collapse
Try this
should be it.

pls help) Ace liquid s100 can verify package signature

Hey guys,
I really need some help here, I have a liquid s100 from fido. i rooted perfectly fine, download the rom manager and got the clockwork recovery on it downloaded the modaco froyo fido version of rom and flashed it all fine but its stuck on the boot screen since then, so i tried manual r/s and went into recovery and ive been trying all sorts of roms but its says cant verify the signature, im so frustrated please help. What am i doing wrong here, or how can i just return to the stock fido rom, please help.
This is the error:
Finding update package..
opening update package..
verifying update package..
E: signature verification failed.
installation aborted.
And this is the same error for pretty much every rom ive tried..
Please help anyone.
Sent from my GT-I9000M using XDA App
anyone??
pls.
How hard can "flash without signature check" be?
Koki1337 said:
How hard can "flash without signature check" be?
Click to expand...
Click to collapse
Please help man im just stuck dont know what to do. Pls.
Sent from my GT-I9000M using XDA App
Just put Liquid in Restore mode -> Volume UP + Camera + Power button and with Acer Tools flash it again with some BIN file. Its ease.
If you need more help- say
Never used Clockwork Recovery.
Install MalezRecovery and flash the ROM you want to flash without signature check.
Or flash a ROM which is signed like LCR-F- http://lcr-team.org/v1/index.php
Or just flash a new bin:
Here is a how to guide- http://android.modaco.com/content/a...rial-how-to-flash-bin-files-on-acer-liquid-e/
Here is a link full of bins- http://android.modaco.com/content/a...uid-liquid-e-all-roms-bin-extract-collection/

Need some help

hey guys
Need some help for my Dell Streak 5
I tried installing custom rom but it gave error that signature not found
So then I installed Rom manager from ClockWorkMod
It asked for root
So then I installed Superuser
But some how it dosen't seem to work
Where am I getting it wrong?
I am completly noob in android now
What recovery are you using? Sounds like CWM. There's an option within CWM recovery to toggle signature verification. That should turn it off and let you install whatever ROM you want. Also, ROM manager is known to not work with the Streak. Not sure if that's changed with the latest versions of CWM for the Streak.
Sent from my Dell Streak using Tapatalk 2
Ruturaj001 said:
I am completly noob in android now
Click to expand...
Click to collapse
start reading:
http://forum.xda-developers.com/wiki/Dell_Streak_5/Flashing_Guide
hunderteins said:
start reading:
http://forum.xda-developers.com/wiki/Dell_Streak_5/Flashing_Guide
Click to expand...
Click to collapse
Thanks for suggestion
But I have problem using guide
Because I am trapped in loop
CWM wants me to be root and I can't be root
because when I try to flash Superuser.zip as update.zip
it's giving error signature not recognized
so without root I can't use cwm and without cwm I unable to root the phone
:crying:
You need to read and follow the advice given to you in this thread earlier by Edrill.
In Clockworkmod 6.0.1.2:
1. Select "Apply update from .zip file on SD card".
2. Select "toggle signature verification" and make sure the bottom of the screen says "Signature Check: Disabled".
3. Select Superuser.zip and flash it.
Your device, for whatever reason, has the signature check function enabled. As long as it is enabled you will not be able to install unsigned zips, like Superuser.zip apparently is. So disable it!
All my zips are signed and the signatures are valid.
His version is either modified or corrupt, he never stated where he got it from.
He also stated he's using rom manager, so there's likely other issues beyond that.
TheManii said:
All my zips are signed and the signatures are valid.
His version is either modified or corrupt, he never stated where he got it from.
He also stated he's using rom manager, so there's likely other issues beyond that.
Click to expand...
Click to collapse
the cwm most probably not from here... and using rom manager that was never meant for streak makes it even worse ... maybe he is on stock rom 2.2.x ...

TWRP Recovery - Signature Verification Failed Error - Help please

Hi Everyone
I'm hoping to get some help here, I have flashed my SM-910F (Galaxy Note 4) with TWRP Recovery.
When I try to install SURoot, i get an error stating signature verification failed.
How do I disable signature verification in TWRP Recovery. I have looked everywhere in the menus and its just not visible, I have tried different TWRP recovery versions in the hope that I can get to the setting to disable it but so far no luck.
Can someone help please
Thank you in advance!
Jay_010 said:
Hi Everyone
I'm hoping to get some help here, I have flashed my SM-910F (Galaxy Note 4) with TWRP Recovery.
When I try to install SURoot, i get an error stating signature verification failed.
How do I disable signature verification in TWRP Recovery. I have looked everywhere in the menus and its just not visible, I have tried different TWRP recovery versions in the hope that I can get to the setting to disable it but so far no luck.
Can someone help please
Thank you in advance!
Click to expand...
Click to collapse
Update in case anyone has the same problem:
1. Flash twrp using Odin but do not let it auto reboot.
2. Then power off and immediately go back into recovery.
3. Finally flash SU and reboot back into system.
You're done.
Hope this helps someone.
Jay_010 said:
Hi Everyone
I'm hoping to get some help here, I have flashed my SM-910F (Galaxy Note 4) with TWRP Recovery.
When I try to install SURoot, i get an error stating signature verification failed.
How do I disable signature verification in TWRP Recovery. I have looked everywhere in the menus and its just not visible, I have tried different TWRP recovery versions in the hope that I can get to the setting to disable it but so far no luck.
Can someone help please
Thank you in advance!
Click to expand...
Click to collapse
I think your supersu.zip file is corrupted
Download again and flash it should work

Categories

Resources