[Q] Shop button does not respond. - Nook Touch General

I'm running nook touch 1.1 firmware.
I successfully rooted using SalsichaNooter 0.4 18/11.
When clicking shop in the andoird apps the nook flickered then i was given a credit card not found error. now when i click the physical nook button the menu pops up. i click the "Shop" button and the menu goes away but the screen goes no where. It works properly for the other selections int he nook menu.
So far i tried using the Erase & DeRegister Device option.
I tried the factory reset method by holding the bottom page turn buttons.
The shop selection stil will not respond.

I seemed to have fixed it with these instructions.
...I cant post links apparently, understandable.
It was on the ebook reader blog. google search: How to Unroot Nook Touch to Restore it to Original Firmware
It restored my nook to 1.0 firmware. Not sure what else this does.

My shop button also does not work from the little appdrawer thingy at the bottom of the screen. But I added a shortcut to the Shop app from my launcher to launch the app directly and that seems to work just fine. It's not much of an inconvenience to do the extra step or two...

Open NookTouchTools and tap B&N Buttons and change the Shop button from "B&N Default" to launch application and then scroll down to the "Shop" app (It should have the same icon as the shop) and select that. It should work great.

Related

[Q] Navigating rooted nook simple touch

Is there a way other than rebooting to navigate back-and-forth from standard nook software to the rooted interface with all the apps?
I don't know which method you used to root but if you have NookTouchTools you could change long press action for 'n' button to show home by using B&N buttons setting in that app (you must have android launcher as default homescreen).
And have unchecked setting "'n' button goes to home directly" to toggle B&N quicknav on quick press 'n' button.
Use ButtonSaviour. It works wonderfuly for me.
Sent from my NOOK using XDA App
I just put the library and shop B&N icons on my home screen, it doesn't get you to the stock home but it works well. Then you can have nook touch tools set to only 1 home screen.
Easy Nav
Use ButtonSaviour.

Button Saviour problems!

I registered on here for this specific question, and any help would be greatly appreciated.
I recently rooted my Nook Simple Touch (1.1) with TouchNooter 1.1. Everything was working perfectly, except the home button. Every time I would press it, it would ask to open with 'Home' (later I found out this is the standard Nook home screen) or something else I could not remember that would send me to the Android home screen.
So a few hours after I rooted I selected Always open with 'Home' (the Nook home, not the Android home). Attempting to reverse this I re-rooted my Nook with no luck. Then I tried restoring it, but Button Saviour is still on the side! How is that possible?
I remember it saying I could reverse the problem by going to the Android settings app. But I can't do this because I can't reach the Android home!
So my question is: how can I clear the setting? I'm using Mac OS X. Thanks in advance
I followed this guide to reset my Nook: [N2E] Recovery and Source for Nook Touch (see Kohr-Ah's post) and re-rooted and everything was back to the way it was
Thanks anyways XDA
corbin052198 said:
I followed this guide to reset my Nook: [N2E] Recovery and Source for Nook Touch (see Kohr-Ah's post) and re-rooted and everything was back to the way it was
Thanks anyways XDA
Click to expand...
Click to collapse
If you come across this issue again, the simplest method is to put a second launcher in /data/app folder of TouchNooter, use the card again, this will force the choice to come up again.
GabrialDestruir said:
If you come across this issue again, the simplest method is to put a second launcher in /data/app folder of TouchNooter, use the card again, this will force the choice to come up again.
Click to expand...
Click to collapse
Alright, thanks
I'm aware that this is slightly offtopic but found that Button Saviour is useless (for me) and only consumes precious CPU. Just map "n" button to "go to desktop" in AWD settings and the only thing You loose is the back arrow but that one can be accesed from the upper bar (that with clock and battery) so 99,9% of the time Button Saviour is useless.
I've notices a slight improvement of Nook overall speed by uninstaling it.
You can uninstall it by apps like "root uninstaller" along with others systems apps (like gmail, music) (this topic pops up in google cause it has ambigious title so Ive just added this for others)
After I rooted, I can't go to the android home. Always goes to nook home. When I click the button savior it just say "Button Savior has ben denied superuser permission". Tried to connect using adb to uninstall Button savior but it doesn't work. Tried to root again using touchnooter 2.1.31 but no luck. Please help.
Soea said:
I'm aware that this is slightly offtopic but found that Button Saviour is useless (for me) and only consumes precious CPU. Just map "n" button to "go to desktop" in AWD settings and the only thing You loose is the back arrow but that one can be accesed from the upper bar (that with clock and battery) so 99,9% of the time Button Saviour is useless.
Click to expand...
Click to collapse
I thought I can live without button savior but in several apps I am using the upper bar is not available.
ssc742 said:
After I rooted, I can't go to the android home. Always goes to nook home. When I click the button savior it just say "Button Savior has ben denied superuser permission". Tried to connect using adb to uninstall Button savior but it doesn't work. Tried to root again using touchnooter 2.1.31 but no luck. Please help.
Click to expand...
Click to collapse
did You try long pressing the home button in button saviour? it should open a window with curently opened apps, i dont think this will help much but try it
cceerrtt said:
I thought I can live without button savior but in several apps I am using the upper bar is not available.
Click to expand...
Click to collapse
it just hit me theres another way
1.open Nook Touch Tools
2.select "B&N buttons"
3.select "'n' button goes to home directly"
4. (optionally) select "'reading now' button action" and choose "orientation" (so You can change orientation with one click by clicking that book icon in upper left corner)
5.select "Long press 'n' button action, change it to "Open recent app dialog"
6.select "show extra action buttons in recent dialog"
7.now you can access "back arrow" by long pressing the "n" button (physical button), i know its not the best (cause you have to press it like 3 sec) but it works xD
that's also my setup but I stay with the button savior (as a backup option) because sometimes it is more comfortable than longpressing "n" button, which doesn't work 100% and takes time.
Was able to fixed the issue. I restored to original and re-root again.
Thanks
I didn't find much utility in Button Savior. Except for the home button it mostly said "This feature requires 2.2".
With the "n" button hacked, the lower left hardkey as back and the lower right hardkey as menu I don't need anything more.
I would miss the original functionality (previous and next page) on the right side. I have just lower left button remmaped to Back. It would be great if NookTouchTools (cant remember the exact name) could allow to define also long press actions for hardware buttons (I would use those for menu access).
Once I got to Android home screen, I re-mapped my buttons. I'm right handed, so I usually don't use the left buttons. The top left button is Menu, the bottom left button is back, and long press home button is Android home. After that I killed Button Savior
Exactly the same for me.

[Q] home -> back to ADW?

I just got an NST today and rooted it with the clockwork mod method. So far things are working pretty well, with one major setback: I am having trouble getting back to the ADW. I selected ADW as the default home, but the nook button -> home still takes me to the original home screen, and the menu bar at the top only shows menu & back buttons. So once I open an app, I have no way to launch anything else (besides rebooting, which will bring me back to ADW).
Any help would be greatly appreciated, and I apologise if this has been answered elsewhere, but I couldn't track it down...
Thanks!
Oh, also, I lose the navigation buttons when I go into of the nook interface/reader/settings etc.
Sent from my SGH-I997 using xda app-developers app
B&N modified Eclair co-opts the Home key.
You need to either install Button Saviour (which gives you a constant selection of micro buttons on the edge)
or install one of the mods here that will hack the "n" button.
I use a modified /system/framework/android.policy.jar but I'm trying to clean up the mod.
Thanks, button savior did the job. Actually, I had already installed it with the CWM flashes, but I just hadn't figured out how to activate it; I'd noticed the little icon on the side of the screen, but hadn't actually managed to click it!
An alternative to Button Savior is to launch NookTouch Tools and use it to customize the B&N QuickLaunch menu via the B&N Buttons option to open your launcher of choice instead of one of the standard B&N apps. I find the side buttons for BS, Virtual Button Bar or similar programs always seem to be too small to press when I want them, yet get in the way when I don't. The QuickLaunch menu also won't get closed accidentally.
I've over-ridden all of the standard app selections and don't actually see the B&N apps anymore unless I deliberately launch one.
Hmm, that sounds ideal, but I can't seem to find an apk anywhere, can you link me? The root process installed nookcolor tools, which doesn't seem to have that option.
Thanks!
Sent from my SGH-I997 using xda app-developers app
Nook Touch Tools is by XorZone.
Be sure to check the Show extra action buttons in recent dialog option to get the Home, Menu, Back, Search and Orientation options when you long-press the 'n' button, and you can completely eliminate the need for Button Savior.
Just got it up and running, that makes for a much more comfortable configuration. Thanks again!
Sent from my NOOK using xda app-developers app

Quick question: how to get back to the app launcher?

This seems like an easy question, but I've googled this and searched threads and found nothing.
When using Nook SImple Touch (with nooter) how do I get back to the app launcher, after I enter the B&N E-reader?
Look for an arrow on the right edge around the middle.
This is the Button Savior app. Tap the arrow and it opens up
a few more buttons. Tap on the button with the home icon
and you get back to the launcher. It is also possible to
setup the "n" button to bring up the launcher using
Nook touch tools.
--
cbay said:
Look for an arrow on the right edge around the middle.
This is the Button Savior app. Tap the arrow and it opens up
a few more buttons. Tap on the button with the home icon
and you get back to the launcher. It is also possible to
setup the "n" button to bring up the launcher using
Nook touch tools.
--
Click to expand...
Click to collapse
Thank you so much for the help!
You can also use Nook Touch Tools to enable the same menu on the recent apps menu that shows if you long-press the 'n' key.

Home Button Missing-Back and Recent buttons appear and work fine

I have the Fire HD 10 11th generation running Fire OS 7.3.2.3. I used Fire Toolbox v28.2 to assign custom Launcher Action to the Home Button. The problem that I have is that upon restarting the system, the Home Button is missing and I cannot recover it. The back and recent buttons work just fine. Regardless of the launcher used (I tried Nova Launcher and the system default), the Home Button will not appear. I have searched this forum but did not find an effective way to recover the Home Button (There was the suggestion to use Device Setup App, but I cannot find a version of the app that will run on my device). I do not want to do a Factor Update as it would mean reinstalling all of my data. Any assistance is appreciated in getting the Home Button back. Thanks.
No sure if you solved the problem.
I had got the same problem with you, and got solved by using Fire Toolbox client Installer (.exe) instead of Portable (.zip).
My Home Button now shows in screen.

Categories

Resources