[Q] CM7 recovery problems - Milestone 2 - Milestone 2 General

I know this is probably a stupid question, but i just installed the zip, and i'm rebooting to wipe the data/cache, but i can't get into the cm7's recovery menu to do it.
Could someone please tell me the button combination to get into the CWM menu?
Thanks a lot

Hold vol up+vol down when led turns blue.

wow
Anonymous_ said:
Hold vol up+vol down when led turns blue.
Click to expand...
Click to collapse
That was amazing, thanks a lot!
Now, could you tell me where I can wipe the data/cache? I've been to each:
+boot
+CPU Settings
+Tools
and i can't see the option anywhere.
Sorry, my friend who's the "expert" has gone out to lunch, and I thought I'd try to continue

Boot and select latest recovery

YAY! now I'm just waiting for this rotating... whatever it is to finish.. and I hope to use it very soon, thanks!

Related

[Q] Defy stuck on Motorola's logo and can't access the recovery mode

Hello guys, first, sorry for my bad english.
I'm having some problems with my defy, I was using the CM7 for months but now it start to stuck on Motorola's logo and when I tried to access the stock recovery, by pressing Power + volume down, anything happened, I only can access the bootloader by pressing Power + volume up.
So I tried to flash a old SBF that I have here, but, when the device will start again, it stuck on Motorola's logo again.
Then I downloaded a SBF that seems to be the "original of my phone version" and flashed it, but the device stills stucking at the Motorola's logo.
I think that I need to wipe data/cache, but how?!?
Any advices??
I need my phoneee!!
again flash with nodric ram
moji7 said:
again flash with nodric ram
Click to expand...
Click to collapse
Sorry, I don`t understand
He is saying you should start over and flash the Nordic SBF again.
But it would be helpful to know which SBF's you've tried which didn't work. What RSD lite version you are using? I'm using RSD Lite 5.3.1 and the 5.1.0 motorola driver and never had issues.
Don't forget to "wipe data/factory reset" and "wipe cache" in Stock Recovery (power + vol down) before flashing.
Also, what did you do before CM7 stopped working. It doesn't break for no reason.
twa_priv said:
He is saying you should start over and flash the Nordic SBF again.
But it would be helpful to know which SBF's you've tried which didn't work. What RSD lite version you are using? I'm using RSD Lite 5.3.1 and the 5.1.0 motorola driver and never had issues.
Don't forget to "wipe data/factory reset" and "wipe cache" in Stock Recovery (power + vol down) before flashing.
Also, what did you do before CM7 stopped working. It doesn't break for no reason.
Click to expand...
Click to collapse
Im using RSD lite 4.9 and I don't know the version of the drivers...
And I could not wipe data/cache because I could not access the stock recovery
when I tried to access the stock recovery, by pressing Power + volume down, anything happened, I only can access the bootloader by pressing Power + volume up.
Click to expand...
Click to collapse
To enter stock recovery: Power up phone and press the vol down button. When you see the android icon push volume up and down at the same time.
twa_priv said:
To enter stock recovery: Power up phone and press the vol down button. When you see the android icon push volume up and down at the same time.
Click to expand...
Click to collapse
I already tried it, but i can't acces the stock recovery!
pituca292 said:
Hello guys, first, sorry for my bad english.
I'm having some problems with my defy, I was using the CM7 for months but now it start to stuck on Motorola's logo and when I tried to access the stock recovery, by pressing Power + volume down, anything happened, I only can access the bootloader by pressing Power + volume up.
So I tried to flash a old SBF that I have here, but, when the device will start again, it stuck on Motorola's logo again.
Then I downloaded a SBF that seems to be the "original of my phone version" and flashed it, but the device stills stucking at the Motorola's logo.
I think that I need to wipe data/cache, but how?!?
Any advices??
I need my phoneee!!
Click to expand...
Click to collapse
Sorry, missed that part.
Well ... I don't recall reading about such behaviour before - unless the battery is dead.
But then you wouldn't be able to get the bootloader either.
I would try again to get into recovery and make sure you press the power + vol up buttons for a few seconds before releasing.
And out of curiosity: what exactly did you do when CM7 stopped working. It doesn't break for no reason.
twa_priv said:
Sorry, missed that part.
Well ... I don't recall reading about such behaviour before - unless the battery is dead.
But then you wouldn't be able to get the bootloader either.
I would try again to get into recovery and make sure you press the power + vol up buttons for a few seconds before releasing.
And out of curiosity: what exactly did you do when CM7 stopped working. It doesn't break for no reason.
Click to expand...
Click to collapse
I tried to enter in the recovery mode a lot of times and nothing!
I didn't done anything diferent that could make CM7 stop, it stopped by itself!
Guys, I'm thinking in send it to a techinical support, of Motorola.
What do you think?
twa_priv said:
To enter stock recovery: Power up phone and press the vol down button. When you see the android icon push volume up and down at the same time.
Click to expand...
Click to collapse
You are a life saver!
-----------
I got a similar situation as our friend here. Today I had shutdown my Defy (rooted + stock 2.2.1) when i tried to turn It on again It got stuck at the operator logo forever!
I did the clear data from recovery and I got my cellphone back to live. Thanks!
Im Stuck too...
I have a problem with my Defy MB525, This morning I woke up and found the cell with the Android Logo with Exclamation, it was really hot so I turn off pulling the battery.
Then I tried to power ON but still stuck on Motorola's logo, in trying to enter the recovery (Pressing vol+ and Power but nothing, same pressing vol-).
the strangest of all is that my Defy don't display the white led, so it's not charging?
As far as I was to the symbol of android with red exclamation, I tried pressing the volume buttons but none served.
I was looking in other threads but nothing helps me, can you help me please? thanks.

[Q] Myouch 4G

Hey, so i recently broke my mytouch4g. The volume up button seems to act as if its jammed, when its really not because i can still click it. So i called a local cell phone repair shop, and they didnt know what kind of cable the mytouch4g had for the volume buttons, and I'd like to know before i actually go out and try to get it fixed.
When i press the power button, it vibrates 3 times, then blinks an orange LED, screen somewhat lights up. if anyone could help me out on this, maybe by flashing something to get in a different mode instead of that, because after letting it sit for a day it finally turned on. but im afraid to turn it off and try again to see what happens.. Is there some sort of menu i could flash that'll get me to this? Thanks
Well you're booted up right now, in the Android OS right? Are you rooted? If so, flash CWM Recovery and flash a ROM. If not, don't know what to tell you. Not even sure if this answer is right. Anyone wanna back me up or give a better answer, be my guest. Hope this helps you somewhat.
CWM recovery? can you get to that with volume up + power ? and once i turn it off, it wont work again till i get if fixed. this has happened before
Skrillz said:
CWM recovery? can you get to that with volume up + power ? and once i turn it off, it wont work again till i get if fixed. this has happened before
Click to expand...
Click to collapse
Yes CWM Recovery. If you already flash the recovery, you can get there through bootloader (volume DOWN + power) then select recovery.
invasion2 said:
Yes CWM Recovery. If you already flash the recovery, you can get there through bootloader (volume DOWN + power) then select recovery.
Click to expand...
Click to collapse
Yeah see thats the thing. it doesnt let me do anything besides the volume up. it like, over rides everything. i cant get into bootloader, or recovery. jsut thus thing where it vibrates 3 times then blinks nonstop until the battery drains.
Skrillz said:
Yeah see thats the thing. it doesnt let me do anything besides the volume up. it like, over rides everything. i cant get into bootloader, or recovery. jsut thus thing where it vibrates 3 times then blinks nonstop until the battery drains.
Click to expand...
Click to collapse
OK then. Download ROM Manager from the Play Store, flash the latest recovery, then select reboot into recovery.
Also, off topic, but...700th POST!
invasion2 said:
OK then. Download ROM Manager from the Play Store, flash the latest recovery, then select reboot into recovery.
Also, off topic, but...700th POST!
Click to expand...
Click to collapse
i dont think your getting it. when i power my phone off, completely off. and i try to turn it on, just by the power button. it automatically thinks im pressing volume up. i cant change it, no matter how many times i try to boot from volume down + power.
No clue then, sorry mate..
Skrillz said:
i dont think your getting it. when i power my phone off, completely off. and i try to turn it on, just by the power button. it automatically thinks im pressing volume up. i cant change it, no matter how many times i try to boot from volume down + power.
Click to expand...
Click to collapse
Can you get in to Bootloader?Me too recently had that kind of probem on my desire.Phone did not allow to get in to recovery.

[Q] Can't boot into recovery

Hey guys. I just put the new JB leak on my razr m and rooted it using motofail2go. First of all, my root doesn't work so I tried re-flashing it. Didn't work. Then I tried to reboot into recovery and it sits at the screen with the android with the red triangle. I have no clue what I did wrong... can someone please help me before I freak out? lol
You used to be able to press volumne up+down and it would go into recovery from there...
pjcons said:
You used to be able to press volumne up+down and it would go into recovery from there...
Click to expand...
Click to collapse
I can get to the boot options but as soon as I click on recovery it shows the android dude and restarts... :/
audix321 said:
I can get to the boot options but as soon as I click on recovery it shows the android dude and restarts... :/
Click to expand...
Click to collapse
I have the same problem - stuck in recovery, cannot get into it to wipe cache, etc. How did u fix this?
kashvyas said:
I have the same problem - stuck in recovery, cannot get into it to wipe cache, etc. How did u fix this?
Click to expand...
Click to collapse
On the screen with android you have to hold volume down and tap volume up (with down still held) to access the recovery menu.

S4 won't boot into cwm recovery

Okay so I have the cyanogen mod flashed on my s4. But for some reason now it won't boot into cwm recovery. Any ideas?
Sent from my SGH-I337 using xda app-developers app
bboyimpact33 said:
Okay so I have the cyanogen mod flashed on my s4. But for some reason now it won't boot into cwm recovery. Any ideas?
Sent from my SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
In Developer options, enable the Advanced Reboot.
The 3 button combo will work, it's just a matter of timing. Remove and replace the battery, hold vol up + home, then power, holding all three, and when it vibrates, let go of power only.
You could also hook up in USB Debugging mode and issue the command:
adb reboot recovery
And if you don't have a developer option go into about phone and tap build number 7 times.
<=LongJohnSilver=> said:
In Developer options, enable the Advanced Reboot.
The 3 button combo will work, it's just a matter of timing. Remove and replace the battery, hold vol up + home, then power, holding all three, and when it vibrates, let go of power only.
You could also hook up in USB Debugging mode and issue the command:
adb reboot recovery
Click to expand...
Click to collapse
Some people, including myself, cannot get it to work with the standard procedure...the solution is to basically do it twice. Here's a copy/paste of the instructions:
Long press the power button and choose "power off". Give your phone a few seconds to turn off completely. Once it's off, press and hold these 3 buttons at the same time: POWER+VOLUME UP+HOME. Look at the top left of the screen - as soon as you see little blue text saying entering recovery, let go of all buttons immediately...but be ready...if your phone vibrates (it might be trying to reboot normally again), press and hold those same buttons again until you see the blue text again...then let go immediately. Now you will see your recovery!
jeffreii said:
Some people, including myself, cannot get it to work with the standard procedure...the solution is to basically do it twice. Here's a copy/paste of the instructions:
Long press the power button and choose "power off". Give your phone a few seconds to turn off completely. Once it's off, press and hold these 3 buttons at the same time: POWER+VOLUME UP+HOME. Look at the top left of the screen - as soon as you see little blue text saying entering recovery, let go of all buttons immediately...but be ready...if your phone vibrates (it might be trying to reboot normally again), press and hold those same buttons again until you see the blue text again...then let go immediately. Now you will see your recovery!
Click to expand...
Click to collapse
Cool
CWM recovery only requires you to push the volume up key and then press the power key until the phone vibrates and then let go of the power button only. When the blue lettering appears, let go of the volume up. The home button should only be required with TWRP.
scott14719 said:
CWM recovery only requires you to push the volume up key and then press the power key until the phone vibrates and then let go of the power button only. When the blue lettering appears, let go of the volume up. The home button should only be required with TWRP.
Click to expand...
Click to collapse
Whatever the reason, that is not the case with my phone and many others. I've read several threads of people having the same issue. I'm not sure if it's an issue with the OUDHS CWM w/ auto-loki or what.
I've never heard of letting go of the power button only while still pressing volume up, but I gave it a try just to see...it did get me into CWM recovery but only after doing it twice, similar to the method I wrote above.
I have tried letting go of both volume up and power (no pressing home at all) and never found a way to get into recovery.
Anyways, it seems there's no harm in pressing the home button either way and it's probably easier than letting go of the power button and still holding volume up...and easier to explain too lol.
jeffreii said:
Whatever the reason, that is not the case with my phone and many others. I've read several threads of people having the same issue. I'm not sure if it's an issue with the OUDHS CWM w/ auto-loki or what.
I've never heard of letting go of the power button only while still pressing volume up, but I gave it a try just to see...it did get me into CWM recovery but only after doing it twice, similar to the method I wrote above.
I have tried letting go of both volume up and power (no pressing home at all) and never found a way to get into recovery.
Anyways, it seems there's no harm in pressing the home button either way and it's probably easier than letting go of the power button and still holding volume up...and easier to explain too lol.
Click to expand...
Click to collapse
I'm having the same problem.
Have you found an answer or work around solution yet?
GS4 AT&T
Base version: I337UCUAMF3
Kernel: 3.4.0-812098
CWM Recovery: 6.0.3.6
rooted with SD format
Never been able to flash the rom successfully
cariboucar said:
I'm having the same problem.
Have you found an answer or work around solution yet?
GS4 AT&T
Base version: I337UCUAMF3
Kernel: 3.4.0-812098
CWM Recovery: 6.0.3.6
rooted with SD format
Never been able to flash the rom successfully
Click to expand...
Click to collapse
You need to read... Seriously, you are going to brick your phone. Do not try to install any custom recovery or ROM of any kind on MF3.
Why can't people read?
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
bboyimpact33 said:
Okay so I have the cyanogen mod flashed on my s4. But for some reason now it won't boot into cwm recovery. Any ideas?
Sent from my SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
My minor issue is that when I boot to recovery (twrp) it get to the twrp splash screen then freeze. Takes me another reboot or two before recovery really launches.
Tried reinstalling recovery and fixing permission, etc.. but same deal. Anyone have thoughts on this?
I boot into recovery all the time but I have to hold volume up and home button.
Bump!
I'm having the same issue. What I did was that I had the CWM recovery installed and tried to reset the flash counter. Now the phone won't boot into the recovery, it just boots up as usual when I press vol up+home+power up. I appreciate any help! :/
metalfr33ak said:
Bump!
I'm having the same issue. What I did was that I had the CWM recovery installed and tried to reset the flash counter. Now the phone won't boot into the recovery, it just boots up as usual when I press vol up+home+power up. I appreciate any help! :/
Click to expand...
Click to collapse
Can you get the blue text in the upper left corner of the screen to appear at any time?
In my case, trying to get into recovery via the 3 buttons is a matter of very precise timing if I try pressing all 3 buttons at the same time. The instant I see the blue text I let go of everything and it works. Hold it for even a fraction of a second longer and the blue disappears and it goes into a normal boot. It works much better if I press Vol Up, then add Power, then add Home. I'm doing that sequence fairly quickly but the point is I'm not trying to press 3 buttons at the exact same time.
But I'm using CWM so I don't need the 3rd button...
From a powered-down state I hold Vol Up then Power and hold both through the vibration until the blue text appears and it goes into CWM recovery just fine. There seems to be a bit more leeway in terms of how fast you need to let go this way although I just tested and holding about a half second too long caused it to bounce out of recovery and do a normal boot. Let go immediately when you see the blue.
Phone won't boot..
So after using CASUAL, my phone rebooted, and got stuck on the splash screen with RECOVERY BOOTING.. in the top left corner. I pull the battery, try to do a normal reboot; takes me to the same screen. Trying the 3 button combo for recovery; same thing. Any suggestions?? I am NOT on MF3 Firmware.
**EDIT** Should have looked into it more before posting, but Found my solution returning to STOCK
im having the same problem.. i rebooted using ROM MANAGER and the android with red exclamation mark appeared... when i hold de buttons, there are blue letters, but the recovery mode dont work, just the android recovery...
edgarzin said:
im having the same problem.. i rebooted using ROM MANAGER and the android with red exclamation mark appeared... when i hold de buttons, there are blue letters, but the recovery mode dont work, just the android recovery...
Click to expand...
Click to collapse
What is the baseband version on your phone?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
guitarpunk8403 said:
What is the baseband version on your phone?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
hey man.. thanks for replying, baseband is MDL.. since CWM wasnt working, i installed TWRP and it is working. It offers the same results right? Im want to flash a 4.4.2 rom...
thanks.
It should....I'm stuck on safestrap, but I always used TWRP on my S3
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Locoman_ said:
My minor issue is that when I boot to recovery (twrp) it get to the twrp splash screen then freeze. Takes me another reboot or two before recovery really launches.
Tried reinstalling recovery and fixing permission, etc.. but same deal. Anyone have thoughts on this?
Click to expand...
Click to collapse
Same with my gionne ctrl v4s lollipop stock ,when i flash cwm made by mirchifood convertor but then i flash that stock recovery it works
But i really want cwm ir twrp to installl supersu and do backups

d802 can't get to recovery/boot!

Hi all,
I think I am in some serious trouble right now.. I tried to flash the latest carbon ROM on my device, but completely
forgot to flash the kernel.
I cannot connect to my device using adb (really can't remember if i didn't enable it, been flashing a couple of ROMS tonight ).
I can however, use fastboot.. But what use is that? Can I somehow restore or get to my recovery?
Any help is appreciated!!
Thanks in advance.
Godfather123 said:
Hi all,
I think I am in some serious trouble right now.. I tried to flash the latest carbon ROM on my device, but completely
forgot to flash the kernel.
I cannot connect to my device using adb (really can't remember if i didn't enable it, been flashing a couple of ROMS tonight ).
I can however, use fastboot.. But what use is that? Can I somehow restore or get to my recovery?
Any help is appreciated!!
Thanks in advance.
Click to expand...
Click to collapse
power off
vol down n power on. then un press vol down for 1 sec.. continue press vol up n down, it ask for hard reset. then press power button 2 times. it will move to recovery.
shaldi said:
power off
vol down n power on. then un press vol down for 1 sec.. continue press vol up n down, it ask for hard reset. then press power button 2 times. it will move to recovery.
Click to expand...
Click to collapse
Hi,
Thanks for the fast reply, but I can't get to recovery.. I've already tried this several times..
Any other suggestions?
EDIT:
It just hangs in black screen, and doesn't get any further when I try this.
Godfather123 said:
Hi,
Thanks for the fast reply, but I can't get to recovery.. I've already tried this several times..
Any other suggestions?
EDIT:
It just hangs in black screen, and doesn't get any further when I try this.
Click to expand...
Click to collapse
If you got to the hard reset screen and pressed power two times but could not get to recovery, its possible that you no longer have any recovery (CWM or TWRP). In some roms, a recovery image is sometimes flashed overwriting the recovery image that you previously installed.
Best bet may be is get back to stock. Try this thread, hope it helps.

Categories

Resources