I seemed to have flashed a completely different dload folder onto my impulse 4g and i get stuck at the att splash image. if anyone would happen to have the STOCK dload or update if they can post it herre it would be great. i searched all around but couldnt find it
It's here.
i NEED help
ok heres what i did i wanted to upgrade my phone to the newest version GB 2.3.4.So what i did was download the update and i followed the installation steps i successfully updated to Gb 2.3.4. so like i was checking how it look and the new feature but when i wanted to go on the android market i went to setting and turn on the wifi and it said Error and then i tried the Bluetooth and it said Error also so then i put my SIMs card in and i was like imma use DATA then and when i restarted my phone it had service but no HSPA+ or Edge or GPRS so like i just hatted my phone from their so then i was trying to root it but iddnt know how to do that so like i read this website and i got the UPDATE.APP or 2.2.2 AT&T did the same steps of the installation of BG 2.3.4 and it went to the process and 1/2 stepp good it passed and then 2/2 also passed it installed it and when it said Successively Installed it said Restarting and the scrren turn of and it vibrated and thats all that happened and i left it like that for the whole days and nothing happened
Do u got any idea?
When i connect it to my laptop it says installing drivers .then its says sucesfully installed drivers ready to use. so then i got to Device Manger and i check what has been installed and their it said USB Human interface device and HID-compliant device WHAT DOES THAT MEAN??
i fist installed the GB 2.3.4 {U8800V100R001C00B518G001} but i did not like it and i installed this ROM {V100R001C00B138SP04CUSTC185D002} thats 2.2.2
ok i found a download that claims to be the new gingerbread miui for impulse 4g users had one tester said its working great on his impulse so i want more testers to confirm it and make a guide for everyone send me your email and ill give ya the link for the download
Gonna test it as soon as my u8800-51 comes in the mail...... shipped from a place about 2 and a half hours from here 3 days ago......... usps is a joke
Haha yea it is a joke
Sent from my Huawei U8800-51 using XDA App
yup there "tracking" is non exhistant and they take forever
Got it in today gonna test it sometime in the next couple days when i get time
Ok let me know how it goes
Sent from my Huawei U8800-51 using XDA App
will do
Sent from my Huawei U8800-51
I haven't had time to install and check out the ROM for my impulse yet. I'm just worried about 4g and wifi connectivity. With my job, having data service on my phone is a must. I know that was a problem with a different ROM for this phone... everything worked except for data and wifi. I guess I'm a little shy to try it as there have been reports of not being able to revert back to Froyo.
Well so far its working on on the first testers phone the second Guy said he is gonna do it when he gets a chance to check it out so hopefully his turns out good
Sent from my Huawei U8800-51 using XDA App
Useless Posts
Why do you guys even keep posting on here with useless information.... I keep
seeing the post over and over about the link to the GB download, and how it worked for 1 guy "who is HE ?" but you do not post the link up to the source.
Then somebody says "oh yeah, i am gonna try it later. will let you know how it goes"...... Then nobody ever posts back their progress. Some people come on here with a purpose of helping Dev's or other people to mod their phones.
If you are not going to follow through with your posts, or post useless information
with no links to what you are talking about..... DON'T POST anything at all.
Thanks,
D
When I try to downgrade to 2.2.2 I can't. It always fails at 2/2 Update. Any ideas?
Sent from my iPad using Tapatalk
KayxGee1 said:
When I try to downgrade to 2.2.2 I can't. It always fails at 2/2 Update. Any ideas?
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
The same is happening to me.. I cant downgrade.
skipped said:
The same is happening to me.. I cant downgrade.
Click to expand...
Click to collapse
Isn't there suppose to be a second file in with the UPDATE file?
Sent from my iPad using Tapatalk
KayxGee1 said:
Isn't there suppose to be a second file in with the UPDATE file?
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
Edit: I did it! Download this file and first update step 1 and then step 2.
http://www.mediafire.com/?ncrnw95th9ekpae
(To start the upgrade I plugged in the phone without battery to the pc while pressing volume up and down)
Now, it is suppose to be downgraded, but it is not booting.. (just operator logo and reboots) but there is no bricking.. I am now trying to update another stock rom froyo posted in this forum.
Edit 2: Secondly, I installed http://www.mediafire.com/?kmh4qbd3v7dslc5 the same way, and its working! but it is u8800pro Froyo. But maybe we have more chances on getting 3g.
skipped said:
Edit: I did it! Download this file and first update step 1 and then step 2.
http://www.mediafire.com/?ncrnw95th9ekpae
(To start the upgrade I plugged in the phone without battery to the pc while pressing volume up and down)
Now, it is suppose to be downgraded, but it is not booting.. (just operator logo and reboots) but there is no bricking.. I am now trying to update another stock rom froyo posted in this forum.
Edit 2: Secondly, I installed http://www.mediafire.com/?kmh4qbd3v7dslc5 the same way, and its working! but it is u8800pro Froyo. But maybe we have more chances on getting 3g.
Click to expand...
Click to collapse
That's great news that you actually downgraded. But EDGE is so painful.
Sent from my iPad using Tapatalk
KayxGee1 said:
That's great news that you actually downgraded. But EDGE is so painful.
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
I downloaded from a chinese web a stock rom for u8800pro with baseband 203026 (same as u8800-51). I flashed it, and then restored all using clockworkmod files from u8800-51 (also, I replaced all files in pink screen and put the original image files from u8800-51). It worked great! my phone is now u8800-51 froyo again. But I still got no 3g.. Can this be possible? I replaced every file! whats the problem then?
The u8800pro stock rom with u8800-51 baseband is here: http://dl.dbank.com/c0i0gctow9
Sorry if this is another useless post. Now I know I won't upgrade knowing that downgrading won't give you your 4g back. I really wish I could afford to get an Atrix. Thanks for the useful posts about downgrading.
Related
what do i do btw im in 8th grade
Did you get the update from Tmobile? A msg at the top saying an update is available, and did you go ahead and download and install it?
If so, and after it tried to reboot it got stuck at the Vibrant screen... here's a fix... follow the instructions, very easy. http://forum.xda-developers.com/showthread.php?t=803492
If you don't want to attempt that then go to TMO and tell them and you'll be sent a new Vibrant
yes and i posred this today why does it say yesterday
mrbloo said:
yes and i posred this today why does it say yesterday
Click to expand...
Click to collapse
Yes to what? that you did the update and then it got stuck?
Also, On my screen it says today... but that's not the problem here, your phone is.
yes to i did the update and what was that update for
Start reading everything about odin and stock vibrant its really not hard at all you'll be ok if you search and read.
Sent from my SGH-T959 using XDA App
^^^^ Yup, exactly.
Also, I already posted the link to the Odin thread on how to fix the Vibrant being stuck after update problem.... Just read it and do it, very easy
mrbloo said:
what do i do btw im in 8th grade
Click to expand...
Click to collapse
Try pulling the battery out for a few minutes and put it back in. Then wait for more than 10 minutes for it to come up. If it doesn't, post back.
I would really use odin 1.30 instead of the one in that thread.
Yeah, once someone sent me the links to exactly where the drivers, PIT and .tar files are, I found Odin (1.3) to be SUPER quick and easy, in terms of getting back to stock and un-bricking my phone.
I searched here and google but can't find a download for odin 1.3.
Can someone post a link plz? Ty in advance
Sent from my SGH-T959 using XDA App
Mine is the same as him. I got the tmobile message on my vibrant and i hit update. then it said update failed. Now my phone is stuck at the logo screen. My latest nanoid backup was 10 days ago and that doesn't cut it. i have everything on my phone. is there any way to fix this without wiping the data on my phone? The only thing i did to my phone was root, segmented battery % and i used the evo blackbar metamorph.
This happened to me today. TMO sucks as a company i know i worked for them they are a bunch of morons.....anyway i digress.
Um what i did was use odin i belive the link is in the link posted. Every file u need is in there and it will take awhile to download. Once downloaded just flash it back to stock then flash it to JI6 if you want.
IMO i think anyone who gets the update should decline it and download via odin. Seriously i didn't add any custom roms cuz i wanted to be legit and get updates normally but i forgot im dealing with tmo. Flashing Bionixs now, screw being legit.
damelanalga said:
This happened to me today. TMO sucks as a company i know i worked for them they are a bunch of morons.....anyway i digress.
Um what i did was use odin i belive the link is in the link posted. Every file u need is in there and it will take awhile to download. Once downloaded just flash it back to stock then flash it to JI6 if you want.
IMO i think anyone who gets the update should decline it and download via odin. Seriously i didn't add any custom roms cuz i wanted to be legit and get updates normally but i forgot im dealing with tmo. Flashing Bionixs now, screw being legit.
Click to expand...
Click to collapse
Did you lose any data when you used odin?
If you just use odin to install the update then no, you won't lose data.
If you're one of the unfortunate ones to try the ota update and got soft bricked then you will be flashing the original firmware and will lose data
Sent from my SGH-T959 using XDA App
Is there anyway to revert gingerbread back to froyo until the devs can root it? There has got to be a way. Need my net back
Sent from my PG06100 using XDA App
As of right now there is no way to revert back to froyo. Take a look at this thread.
http://forum.xda-developers.com/showthread.php?t=1142115
Sent from my PG06100 using XDA App
That sucks..... I cant beleive how much i screwed myself
Sent from my PG06100 using XDA App
well you r not the only one, I hate my self because i clicked upgrade. I lost lost my net on metropcs flashed evo
Yeah i live in a tech dead zone. The only net available is through my phone...
Sent from my PG06100 using XDA App
honorlost84 said:
Is there anyway to revert gingerbread back to froyo until the devs can root it? There has got to be a way. Need my net back
Sent from my PG06100 using XDA App
Click to expand...
Click to collapse
Yes, you can but it's a pain in the butt. Go to this thread and then download the original stock firmware. Make sure USB debugging is turned on also.
To install the file you need to have HTC Sync installed and running. Double-click the file and it should recognize the phone and start installing after some input from you.
If you get a USB error, try booting into the bootloader and installing the exe in the same manner.
I just did this last night because I was in the same situation. It works.
Now you can re-root.
bnampel said:
Yes, you can but it's a pain in the butt. Go to this thread and then download the original stock firmware. Make sure USB debugging is turned on also.
To install the file you need to have HTC Sync installed and running. Double-click the file and it should recognize the phone and start installing after some input from you.
If you get a USB error, try booting into the bootloader and installing the exe in the same manner.
I just did this last night because I was in the same situation. It works.
Now you can re-root.
Click to expand...
Click to collapse
You were able to downgrade to Froyo with this RUU? If so, that's great.. your the only person I've seen post successfully downgrading and being able to root.
bnampel said:
Yes, you can but it's a pain in the butt. Go to this thread and then download the original stock firmware. Make sure USB debugging is turned on also.
To install the file you need to have HTC Sync installed and running. Double-click the file and it should recognize the phone and start installing after some input from you.
If you get a USB error, try booting into the bootloader and installing the exe in the same manner.
I just did this last night because I was in the same situation. It works.
Now you can re-root.
Click to expand...
Click to collapse
I think everyone that ran the factory upgrade has tried this and you seem to be the only one that it has worked for. It goes through the motions then you get error 140 or 170 i think: Bootloader version error. Please get the correct rom update utility and try again
I have rooted my phone and installed the rockmod_devroms_2.3.4.1-speedy and broke my root istalling "extras" can I just try the rooting procesess again or have to revert bak to froyo?
Sent from my PG06100 using XDA App
jimbowski51 said:
I have rooted my phone and installed the rockmod_devroms_2.3.4.1-speedy and broke my root istalling "extras" can I just try the rooting procesess again or have to revert bak to froyo?
Sent from my PG06100 using XDA App
Click to expand...
Click to collapse
What do you mean you broke root? Do you still have s-off and access to recovery?
Lancerz said:
I think everyone that ran the factory upgrade has tried this and you seem to be the only one that it has worked for. It goes through the motions then you get error 140 or 170 i think: Bootloader version error. Please get the correct rom update utility and try again
Click to expand...
Click to collapse
I guess I feel pretty lucky then. I'm fairly certain I didn't miss any steps.
When I upgraded to the gingerbread stock ROM I used this link and chose the "no hboot included" option. Maybe that saved me.
bnampel said:
I guess I feel pretty lucky then. I'm fairly certain I didn't miss any steps.
When I upgraded to the gingerbread stock ROM I used this link and chose the "no hboot included" option. Maybe that saved me.
Click to expand...
Click to collapse
That's not the same as accepting the ota.
Sent from my Gingerbread Speedy 4G using Tapatalk
bnampel said:
I guess I feel pretty lucky then. I'm fairly certain I didn't miss any steps.
When I upgraded to the gingerbread stock ROM I used this link and chose the "no hboot included" option. Maybe that saved me.
Click to expand...
Click to collapse
Yeah, you didnt do the ota update then.
Lancerz said:
Yeah, you didnt do the ota update then.
Click to expand...
Click to collapse
It's still the same update. Whether I installed it through an OTA update or from the bootloader doesn't matter.
You guys can get into the bootloader right? Take one of those modified "official" updates, rename it to PG06IMG.zip and flash it from the bootloader. Then do my first post and flash to Froyo so you can root again. May be worth a shot.
bnampel said:
It's still the same update. Whether I installed it through an OTA update or from the bootloader doesn't matter.
You guys can get into the bootloader right? Take one of those modified "official" updates, rename it to PG06IMG.zip and flash it from the bootloader. Then do my first post and flash to Froyo so you can root again. May be worth a shot.
Click to expand...
Click to collapse
This has already been tried and covered in this thread here: http://forum.xda-developers.com/showthread.php?t=1142115&page=2
I posted the same link in the beginning of this thread.
Unless you have an engineering bootloader, like after you rooted, you can only flash an an un modified pg0610.zip from htc. So any one who took an over the air update is SOL on that front. Best hope now is that the evo 3d root can be applied here
Sent from my PG06100 using XDA App
Wow, I almost just majorly screwed myself (again). I have the shift and its just been sitting in my drawer, waiting to be activated after carefully reading thru the forums so i do not true brick it again.
Anyway, for some weird reason, pulled it out just to charge the battery, and it requested to do an update (since it was connected via wifi), it tried and got stuck (praise the Lord) and Im just now reading this realizing I almost just GOOFED UP BIG TIME. So, wanted to take the time to thank the OP for this post which made me aware of the fact that I would be SOL if I had've upgrade and to prevent me from upgrading. THANKS!!!
xPSYB0RGx said:
Wow, I almost just majorly screwed myself (again). I have the shift and its just been sitting in my drawer, waiting to be activated after carefully reading thru the forums so i do not true brick it again.
Anyway, for some weird reason, pulled it out just to charge the battery, and it requested to do an update (since it was connected via wifi), it tried and got stuck (praise the Lord) and Im just now reading this realizing I almost just GOOFED UP BIG TIME. So, wanted to take the time to thank the OP for this post which made me aware of the fact that I would be SOL if I had've upgrade and to prevent me from upgrading. THANKS!!!
Click to expand...
Click to collapse
sooo.... hit the thanks button then
They've recently rooted the Sensation and EVO 3D...hopefully it will trickle down to us Shift owners....
Stuke00 said:
sooo.... hit the thanks button then
Click to expand...
Click to collapse
I thanked the OP, and I thanked u for reminding me to be "thankful"!!
This is a video i made on how to unlock bootloader, install recovery cwm upgrade pretty much the whole process of going from 2.2.2 to 2.3.4 the quality isnt the greatest but it will do it took me reflashing my phone so i dont want any *****ing cause i didnt have to do this.
Credit to all developers who were mentioned, work was used or helped. None of this is my work i simply put together a detailed video guide around 30 minutes lol.
Part 1: http://www.youtube.com/watch?v=zBdrp8_pRdI
Part 2: http://www.youtube.com/watch?v=FJ-mnJrwzSI
Part 3: http://www.youtube.com/watch?v=wgjyrAXNGAc
hope this helps!
DONT FORGET TO THANK ME!
If there are any issues, easier ways of doing this or questions dont hesitate to let me know!
Although the official update is out this rom will allow you to flash back to stock for any reason and it has an unlcoked bootloader, at the moment i recomend it over the official ota
thanks for your efforts.
keep up the good work and do post screen shots also.
Will post screenshots now
Sent from my MB860 using XDA Premium App
some more screen shots
Thx! Great guide
Sent from my MB860 using XDA App
Pizzaapu said:
Thx! Great guide
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
your welcome! push the thanks button lol
Great!
Thanks
but i'm still having the issue that AT&T Kernel from 4.5.91 freezes my touchscreen completely :-(
So as of right now, you HAVE to unlock the bootloader in order to install GB ROMs correct?
noguefr said:
Great!
Thanks
but i'm still having the issue that AT&T Kernel from 4.5.91 freezes my touchscreen completely :-(
Click to expand...
Click to collapse
when does it freeze, do you open a specific app on boot up? details so that i can be of as much help as possible
r34p3rex said:
So as of right now, you HAVE to unlock the bootloader in order to install GB ROMs correct?
Click to expand...
Click to collapse
yes to my knowledge because you need the newest cwm which only works with an unlocked boot loader if anyone knows other wise please illuminate me to this as i would like to make a new guide
edit: actually i believe you can sbf the leaked ota from motorolla but not many people are doing this because if you try to revert to stock it hard bricks so this is the only way if u want to go back to 1.26 or 1.83 without a brick.
Wow, amazing work. Thanks for putting so much effort in!
I just got at AT&T Atrix that comes with 4.1.52, Froyo 2.2.1. Is the procedure going to be the same at this?
Thanks again.
modman21 said:
Wow, amazing work. Thanks for putting so much effort in!
I just got at AT&T Atrix that comes with 4.1.52, Froyo 2.2.1. Is the procedure going to be the same at this?
Thanks again.
Click to expand...
Click to collapse
it is the same procedure once you ota to 1.83 im not sure if it will work on previous versions also this is only for att
edit: your welcome im glad to see people needed and appreciate it
thanks for the hand here.
In fact, after wipe/reboot immediatly after system is up, the touchscreen and volume buttons don't respond at all, the only button responding is the power button....
That's weird did you have any mods installed before this?
Sent from my MB860 using XDA Premium App
noguefr said:
thanks for the hand here.
In fact, after wipe/reboot immediatly after system is up, the touchscreen and volume buttons don't respond at all, the only button responding is the power button....
Click to expand...
Click to collapse
are you on an att atrix if so make sure you start fromSTOCK and that you do not unzip the update if this doesnt work try one of the other roms same process should work as long as they are zips that install through cwm if still no luck flash to stock and send ur atrix in as a touchscreen malfunction its covered under waranty
Couple Questions:
I have Gingerblur installed on 4.1.83, how do I go back to stock 4.1.83?
Does this procedure also root 4.5.91 or is that done separately?
Thanks
To go back to stock there is a zip in the themes section I believe that will revert or you can SBF back to stock
Sent from my MB860 using XDA Premium App
MOD please link this in the how to's there doesnt need to be any more threads asking for a guide i will be updating soon and adding a video on how to sbf back and upgrade but for now the 50+ threads asking for a guide will find this sufficient.
If I install a CustomROM now, can I run an OTA upgrade when it becomes available? (I've got stock 4.1.83)
I'm just a bit scared to upgrade to CustomROM and become stucked to only other future CustomROMs.
You can't not directly from the custom Rom but you CAN sbf back to stock and it's update
Sent from my MB860 using XDA Premium App
so i ddecided to do a risky thing and tried to mod my radio on my phone to read tmobiles 1700 network. however it didnt work since that was for att. now i am stuck with no signal reception for my phone. I am wondering if anyone can provide a tip or a link as to where to get the original radio band signal back?!
thank you soo much if i cant get back to you in time.
reflash modem
Sent from my GT-N7000 using XDA
how do i reflash it? im soo confused right now. i cant find any original modems.
or do you mean unrooting the device? i already tried putting the "XXLR1" modem thing and updating my band but it still has no reception...
aznandroid said:
or do you mean unrooting the device? i already tried putting the "XXLR1" modem thing and updating my band but it still has no reception...
Click to expand...
Click to collapse
Theres a thread in the developement section dedicated to modems inly. Get any modem and flash using cwm.
Edit: http://forum.xda-developers.com/showthread.php?p=25890442
Sent from my GT-N7000 using Tapatalk 2
i tried almost all of them, since my firmware is 4.0.3 i should be using the listed ICS ones right?? most of them dont work ... is there another solution in the meantime while i try them all?
i downlaoded the xxlr1 and xxlb2 and the zc's and it says install from sdcard complete (using CWM RECOVERY) am i not flashing? or am i jsut doing it completely wrong?
try downgrade 2 gb and start over
Sent from my GT-N7000 using XDA
well i see the EDGE symbol now but for some reason the setup will not execute should i keep downloading other gb's and try? its just stuck "touch the android to being screen"...
Lol you know how to mod radio but not reflash it... Thats pretty hardcore
Sent from my GT-N7000 using Tapatalk 2
yea im pretty new to this actually lolol. soo by the looks of what u just said, im probbaly doing WRONG things with the phone LMAO. im just downloading another 2.3.6 now to see if it'll work and not get stuck on the android figure.... T_t_ if it still gets stuck.. is there anythin gelse i can do? LOL
thanks for your tips btw, its been guiding me
Well it depends where you have changed stuff. Best bet would be indeed download a gb rom for your phones region and flash it throught pc odin with a pit file. Follow dr Ketans thread in sticky section of development. If you do that you are likely to get default stuff back. After that a full factory reset on gb should help to. Google for reset code which you enter in dialer. Cant remember but it ended in 3855. Dont do that in ICS btw. All ICS has bug where wipe or hard reset can brick your phone
Where did you change stuff for your radio btw?
Also check this http://forum.xda-developers.com/showthread.php?t=1606012
Sent from my GT-N7000 using Tapatalk 2
baz77 said:
Lol you know how to mod radio but not reflash it... Thats pretty hardcore
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
+1 LoL
Sent from my GT-N7000 using Tapatalk 2
aznandroid said:
yea im pretty new to this actually lolol. soo by the looks of what u just said, im probbaly doing WRONG things with the phone LMAO. im just downloading another 2.3.6 now to see if it'll work and not get stuck on the android figure.... T_t_ if it still gets stuck.. is there anythin gelse i can do? LOL
thanks for your tips btw, its been guiding me
Click to expand...
Click to collapse
Stuck on android figure could mean files blocking booting, in gb from recovery you can do a wipe cache and factory reset. That should solve that. Tp get into recovery volume button up, homekey and power button same time when booting up
Sent from my GT-N7000 using Tapatalk 2
so i jsut got everything back to 2.3.6.. however it wont give me the ICS update via android.... hmm do i have to do it manually in the states?
well for more information, i got the 2.3.6. hong kong (wipe) rom from dr k on another thread and its working beautifully.. however i do miss the 4.0.3 that was installed on this note at first...
i used ODIS to install 2.3.6 through computer.. wondering would i be able to use that for ICS?
and when i download the ICS rom does it have to be the HONG KONG version or any version?
sorry for asking so many questions.. im just soo curious haha.
Check your CSC code of phone. Dial *#06# to get imei. Enter that in *272*imei# that should match your rom in order to update. You can change it there to but it will initiate a full wipe.
Also if you are rooted best to unroot before updating via kies.
Sent from my GT-N7000 using Tapatalk 2
. This is a strange thing today . i restored my backup which i had done when i first rooted my willy in 2012 . today i restored its backup from cyanogenmod recovery and suddenly i got a 4mb update right from official HTC . OTA_Buzz_Froyo_hTC_Asia_India_2_25_720_4-2_25_720_1_release_270480yuz9aaesnb40rr2p
well this update contains ehancements,including:-emergency call support due to new network configuration change...
but i was SOFF the phone might gave a signature error with the security certificate. so the HTC remained on the htc boot logo.... Anyone interested in this file let me know i will upload it,,
sachoosaini said:
. This is a strange thing today . i restored my backup which i had done when i first rooted my willy in 2012 . today i restored its backup from cyanogenmod recovery and suddenly i got a 4mb update right from official HTC . OTA_Buzz_Froyo_hTC_Asia_India_2_25_720_4-2_25_720_1_release_270480yuz9aaesnb40rr2p
well this update contains ehancements,including:-emergency call support due to new network configuration change...
but i was SOFF the phone might gave a signature error with the security certificate. so the HTC remained on the htc boot logo.... Anyone interested in this file let me know i will upload it,,
Click to expand...
Click to collapse
Yes please, i would like a look at it.
Sent from my nexus 7 using Tapatalk
here the link
heavy_metal_man said:
Yes please, i would like a look at it.
Sent from my nexus 7 using Tapatalk
Click to expand...
Click to collapse
download from one drive
http://1drv.ms/1pKKnqA
i posted link by editing above post that this
i edited the above post to paste link. i also send a pm to kylon for whether this update contain anything important may he will add this to rempuzzle. @heavy_metal_man
sachoosaini said:
i edited the above post to paste link. i also send a pm to kylon for whether this update contain anything important may he will add this to rempuzzle. @heavy_metal_man
Click to expand...
Click to collapse
well, it seems to update most apps by a little bit, but what the updates are i am not sure. The thing thats confusing me is that the date stamps are all "wrong". this is dated for september 1st 2008, but if it was new it would be 2014 or similar. best guess is that this was an update for your old rom that you never got before you flashed a custom rom but i dont think its "new" as such. If you wanted to flash it you would need to flash the stock recovery from a ruu as i suspect it wont be compatiable with our edify recovery versions.
well i had updated everything the time when i rooted.
heavy_metal_man said:
well, it seems to update most apps by a little bit, but what the updates are i am not sure. The thing thats confusing me is that the date stamps are all "wrong". this is dated for september 1st 2008, but if it was new it would be 2014 or similar. best guess is that this was an update for your old rom that you never got before you flashed a custom rom but i dont think its "new" as such. If you wanted to flash it you would need to flash the stock recovery from a ruu as i suspect it wont be compatiable with our edify recovery versions.
Click to expand...
Click to collapse
i remember i had almost got all the updated the time when i had rooted. And nobody ever mentioned about this update in the whole wildfire threats as per my memory.
sachoosaini said:
i remember i had almost got all the updated the time when i had rooted. And nobody ever mentioned about this update in the whole wildfire threats as per my memory.
Click to expand...
Click to collapse
Well if you intend to stay on your stock rom i would flash it any just to be on the safe side pal
Lol yeah i would like to flash but
heavy_metal_man said:
Well if you intend to stay on your stock rom i would flash it any just to be on the safe side pal
Click to expand...
Click to collapse
well i would like to flash but what i wanted people is to get benefit of the update. i don't want to back again s'on crap of HTC.. This update was most important from Rempuzzle point of view. many people still use is for daily use may be this thing make playstore working on 2.2 again due to being official ?
sachoosaini said:
well i would like to flash but what i wanted people is to get benefit of the update. i don't want to back again s'on crap of HTC.. This update was most important from Rempuzzle point of view. many people still use is for daily use may be this thing make playstore working on 2.2 again due to being official ?
Click to expand...
Click to collapse
You wont have to go back to s-on at all
Just flash the stock recovery from fastboot. then run the update from the stock os, afetr the reboot flash clockworkmod recovery.
Also since google dropped support for froyo on the google play store this wont solve that issue
head over me to official recovery threat
heavy_metal_man said:
You wont have to go back to s-on at all
Just flash the stock recovery from fastboot. then run the update from the stock os, afetr the reboot flash clockworkmod recovery.
Also since google dropped support for froyo on the google play store this wont solve that issue
Click to expand...
Click to collapse
can you point out me where i could find official recovery...
i am trying to extract recovery from this update itself
well i am trying to flash recovery from this update using PC49IMG method. and i will see whats happen. in the first attempt it seems to work but after few seconds a red sign occur on the screen. i am again restoring the main backup again so that i could be able to see if this could work.
A good news for everyone here on wildfire after this update Google play store is working on my wildfire. Well the play services are trimmed down to extend .but its worth for those who use rempuzzle. Now comes the implementation issues how to put down this In working state in rempuzzle. Kylon will be happy for this . Lets see if pator can help in this ...
Sent from my XT1033 using XDA Free mobile app
Issue with root but I will report back if I been able to fix...
Sent from my XT1033 using XDA Free mobile app
Root workaround is working... I manage to get root working..
Sent from my XT1033 using XDA Free mobile app
In surprised to hear the play store is working again! Very baffled. Gonna get my hands on a wildfire in a week or so and have a peek myself
Sent from my nexus 7 using Tapatalk
heavy_metal_man said:
In surprised to hear the play store is working again! Very baffled. Gonna get my hands on a wildfire in a week or so and have a peek myself
Sent from my nexus 7 using Tapatalk
Click to expand...
Click to collapse
This would be nice. To see back with wildfire..... Bring it on again...
Sent from my XT1033 using XDA Free mobile app
Dirty Flashed On REMPUZZLE and managed market working
@heavy_metal_man well i dirty flashed on rempuzzle and managed to get still market working. but i don't know prior to this was market was working on rempuzzle or not ?
sachoosaini said:
@heavy_metal_man well i dirty flashed on rempuzzle and managed to get still market working. but i don't know prior to this was market was working on rempuzzle or not ?
Click to expand...
Click to collapse
Sorry for my very delayed response. i never did manage to get my hands on a wildfire again but im glad that the market is working for you now although im still not sure how lol
thats sad
heavy_metal_man said:
Sorry for my very delayed response. i never did manage to get my hands on a wildfire again but im glad that the market is working for you now although im still not sure how lol
Click to expand...
Click to collapse
well thats sad . that you don't own wildfire now. well nobody even replied in rempuzzle ROM thread about the question whether their marker is working or not
The OP has asked that this thread be closed until further notice, so the thread has been closed.
Thank you for understanding,
coal686