Hi,
I have Gt540 with 2.3 fastboot i tried to reinstall 2.1 with KDZ FW Update, but when KDZ FW was proccessing it froze so i had to close it, my phone was in Download mode i took out the battery and placed it back, then i tried to open it again but nothing happens.
Related
Hi i was updating my phone from Android 2.1 V20A to V20C
update finished when the phone reboots i got the error msg saying
Arm11 crashed
So tried to flash with emergency and cs_emergency mode but i am getting a error phone not found because of that flash process could not continue further..
try taking the battery out, sim card and memory card and flash it with all that out
@ eoghan2t7 : Thaks for ur response
I booted my phone to downloadmode (pressing Vol down + Power) then flashed using KDZ updater.. and now working
But the KDZ file which i used was ROM with FASTBOOT but i didnt tried with Orginal LG ROM. So i will check later and update here
Thanks
Guys,my phone shows Arm 11 crashed again on 2.1 without fastboot.
I go to the download mode and on kdz updater load kdz file and type on EMERGENCY,DIAG,CS_EMERGENCY and its say THE PHONE NOT FOUND!!!
How to fix this??
I tried to put Europe Open+Fastboot rom and its say again THE PHONE NOT FOUND!!!
EDIT:I fix it
Hi
I have installed SwiftDroid v2.0 rc5 fastboot and after it i wanted to go back to android 2.1 using KDZ UPD, but the phone stopped working. When i try to start it, it vibrates but nothing else happens. It starts in download mode (with and without battery). I was trying to flash it with KDZ updater in emergency mode (with different ROM's) but at the end i get error: TYPE_WPARAM_UPGRADE_ERROR Error Code = 6. KDZ updater and LG Mobile Update recognize the phone but fastboot and adb not. Any idea what to do now?
All i know is that you don't have a boot animation. Try to fix that first:
http://android.modaco.com/topic/327768-no-boot-logoanimation/
How about a different 2.1 rom?
Or maybe u havent turn off android modem yet
as i wrote in my first post, i was trying to flash it with different roms
modem is disabled
i send it to lg service
I downgraded about 5 times using kdz and i never stuffed it up
Sent from my GT540 using xda premium
ok so why the bloody **** not just load into recovery menu from boot and reflash swiftdroid fully?
Hello Xda-Developers and LG GT540 Users,
recently I flashed my GT540 to ICS by mikegapinski by fastboot method.
The phone was running on out.kdz.
I found ICS to have few bugs on my GT 540, so I flashed it to V20A by using KDZ.
Then flashed it to out.kdz by using KDZ.
Now the phone is stuck looping at Android logo, and fastboot mode is not available, only download mode works. KDZ doesn't recognize the phone now, "PHONE NOT FOUND", so I am unable to reflash it.
I tried the method at http://forum.xda-developers.com/showpost.php?p=10238074&postcount=41, but KDZ updater says "Phone Not found".
Experts, I need your advice to save my bricked phone, please help.
hi there,
can you try booting into recovery?? power+home buttons
if that does not work try this methods
http://forum.xda-developers.com/showpost.php?p=13205397&postcount=26
Recovery doesn't activate. Yes I tried all the methods in the thread you posted, including disabling lge modem etc.
I am able to get into download mode, but KDZ updater or my computer doesn't recognize the phone at all. KDZ says phone not found and the computer doesn't show any device connected either.
reboot into fast boot if it's still available and run
fastboot -w
Then reboot
If it doesn't, boot into download mode and flash a fastboot kdz and try again
Sent from my ICS Desire HD using xda premium
Fastboot doesn't show up at all. It gets back to the looping android logo, even if i try the keys for entering fastboot (which worked earlier prior to flashing)
Download mode works, but KDZ doesn't recognize the phone at all!! "Phone not found" keeps appearing.
gt540bricked said:
Fastboot doesn't show up at all. It gets back to the looping android logo, even if i try the keys for entering fastboot (which worked earlier prior to flashing)
Download mode works, but KDZ doesn't recognize the phone at all!! "Phone not found" keeps appearing.
Click to expand...
Click to collapse
Put it in cs_emergency and it should work
Sent from my Desire HD using xda premium
No, I tried cs_emergency, it doesn't work...
maybe try to reinstall drivers and then try again in download mode and in kdz cs_emergency
its not driver prob he flashed kdz before....
You should open Device Manager to see if your PC recognised your phone properly. It should be in Universal Serial Bus Controllers.
I started up the phone in power+volume down = download mode. The PC installed the drivers and it shows in the LGE Composite drivers. However KDZ says phone not found?
I managed to flash the V20A french kdz to the phone.
The phone is now stuck in the android logo boot loop.
What to do next? Please tell.
SOLVED
Okay I finally got it back to working condition by this method. It is for future reference for someone if they are in the same situation:
1) Erase all the drivers of the phone in your PC. Including LGE modem, Android composite, ADB Spooner etc.. and reinstall them using Windows auto update feature.
2) Get phone to download mode and flash V20A and out.kdz using KDZ in cs_emergency
3)That's it phone is back into working condition.
Also, the ICS by mike gapinski is a great rom, but the lg gt540 is too weak to run it. It runs into several errors, most processes stop responding, so the gt540 is too weak to run ICS yet. My 2 cents.
BootLoop -> Solution:
- Boot into fastboot.
- Flash latest recovery (5.0.2.7) (fastboot flash recovery recovery.img)
- Use commands:
fastboot -w
fastboot erase system
fastboot erase boot
fastboot reboot​- Boot into recovery (now you will can do it, 'cuz you flashed it previously)
- Flash another rom, like PCF v5.
- Now your phone will boot correctly.
- To flash 2.1 try don't use kdz, you can brick your phone doing that. There are lots of very goods 2.1 custom roms...
Or you sholud try another computer...
the best rom for gt 540 is by mur4ik 2.3.7 .tested , 100% stable.mine run on 825mhz.
Sent from my GT540 using XDA App
Hello,
I have LG G2 (d802 polish version) with 4.2 rooted stock rom, Installed pac rom two days ago and then (stupidly) changed build.prop ro.sf.lcd_density value from 480 to 240 and since then phone is bricked It's either booting forever (LG logo) or booting all the time to recovery mode( I have installed CWM recovery, and later Philz CWM). Now the good side is:
- I can get to download mode and connect to LG Flashtool. .When flashing the tot file BIN_LGD802AT-00-V10b-EUR-XX-SEP-07-2013-16G from XDA Storagecow.eu site, I can connec the phone via USb, change the port to 41 and it starts flashing. HOWEVER, when flashing the stock rom, LG flashtool skips all the partition and flashes it in seconds, then stops at 84 percent, tries to get factory reset,waits for it120 sec and then I have the error DOWNLOAD FAILS. What can be the problem here? Earlier I flashed the same bin file without any problems, and it didn't skipped through partitions , and everything went fine. WTF? Seriously maybe someone knows because I am desperate here. Already trying 2 days to figure it out. Haven't tried the KDZ method yet, because I have Windows 8,1 , and I am having permission errros while trying to flash. I will atttach a screenshot of LG flashtool skipping all the partitions whil flashing soon.
Please HELP!
clarification
In any case I am just asking why Lg Flash Tool is skipping all the partitions and flashin properly and then stopping at 84 and not restarting ? How can I flash back to stock? Any advice appreciated. thanks.
anyone can help?
Allrite bro..i oso facing a same problem with bootloop..i was at 4.2.2 stock rom with rooted and with twrp recovery too. After i update to ota 4.4 kitkat my g2 was bricked..its just boot with LG Logo and is was not boot up. Allrite. U can try to this tutorial. .pls doublecheck izzit u (flashing DLL) file was correct, and izzit its.match with firmware that u download? Pls.ensure tat..if that both file was correct and matching, is should be ok when u flashing. ..hope i can sharing to u. And sori about my Bad english..
Sent from my LG-D802 using xda premium
I have the same problem!! Bootloop at LG logo and diode flshing. No matter what .kdz i flash or .TOT always i can get download mode, but flashing any file doesn't help.
collller said:
I have the same problem!! Bootloop at LG logo and diode flshing. No matter what .kdz i flash or .TOT always i can get download mode, but flashing any file doesn't help.
Click to expand...
Click to collapse
Did you try to let LG Mobile Support Tool download and flash matching ROM file automatically? That worked for me when I was stuck in LG logo boot loop. In order to make Support Tool reflash ROM select menu Extra Featrues and then Reset Upgrade Error (or something like that - having tool in german here ) Of course phone must be in download mode and connected to PC.
Hope this helps
After kdz/tot flashing you might have to reset the phone.
either:
Hold volume down + power, wait for lg logo, release keys and hold them again (then proceed to factory reset)
OR
Hold volume down + power, wait for lg logo, release keys and hold volume up + volum down (then proceed to factory reset)
Did you solve this?
Update,
I fixed this problem by using LGUP. My phone was refurbished (ls980) so that's why twrp didn't booted,
Hello,
I have a LG G2 d802 32gb variant. I bought it a week ago. I was running andoid kitkat OS (HK D80220C). It wasn't rooted. I tried to get official updates from about phone section but "no updates". So i decided to manually flash updates from a rooted recovery as i did in my LG G3.
First of all I rooted it by "IOroot". Then tried to install custom recovery by "autorec d802". Everything went good and autorec was also successful. I asked me to reboot into recovery, I pressed yes and then it took me to "fastboot mode". I tried to reboot into OS by pressing power button (As battery is non-removable). Everytime it rebooted back into that fastboot mode. This once happened with me on LG G3. So i tried to flash "laf" and "recovery" image and downloaded from here
http://downloads.codefi.re/autoprime/LG/LG_G2/D802/Stock_Firmware
I flashed them by CMD fastboot method. Now it stuck at "LG Logo" and download mode was also started. So i decided to install a stock rom by KDZ or Tot method. First i tried KDZ method. I downloaded stock rom "Hong Kong D80220C_00.kdz" which it was previously running. Also installed all drivers, downloaded flashtools2014 and connected phone while in download mode.
I started KDZ method as told here
http://forum.xda-developers.com/showthread.php?t=2432476
But everytime it shows internal error on "2 or 3 percent". It didn't worked for me. So i decided to do tot mothod.
Download tot file, dll file, LGFlashtool, drivers etc.
Followed whole process which was also described in above post. But when flashtool reached at 94 percent and mobile was being rebooted it showed error
"Fboot check"
"Fboot Check"
"Can't reboot completely"
I tried to turn of phone at this condition by waiting and then doing a factory reset by keys combination but it keeps resetting and rebooting. I searched whole internet but can't find a solution. Can anyone please help me. Because i bought this cellphone a week ago for my friend and i would not be able to face him after showing a sick phone. Please someone help .
Only download mode of phone is working, It also keeps led light on while stuck at logo.
dksoni411 said:
Hello,
I have a LG G2 d802 32gb variant. I bought it a week ago. I was running andoid kitkat OS (HK D80220C). It wasn't rooted. I tried to get official updates from about phone section but "no updates". So i decided to manually flash updates from a rooted recovery as i did in my LG G3.
First of all I rooted it by "IOroot". Then tried to install custom recovery by "autorec d802". Everything went good and autorec was also successful. I asked me to reboot into recovery, I pressed yes and then it took me to "fastboot mode". I tried to reboot into OS by pressing power button (As battery is non-removable). Everytime it rebooted back into that fastboot mode. This once happened with me on LG G3. So i tried to flash "laf" and "recovery" image and downloaded from here
http://downloads.codefi.re/autoprime/LG/LG_G2/D802/Stock_Firmware
I flashed them by CMD fastboot method. Now it stuck at "LG Logo" and download mode was also started. So i decided to install a stock rom by KDZ or Tot method. First i tried KDZ method. I downloaded stock rom "Hong Kong D80220C_00.kdz" which it was previously running. Also installed all drivers, downloaded flashtools2014 and connected phone while in download mode.
I started KDZ method as told here
http://forum.xda-developers.com/showthread.php?t=2432476
But everytime it shows internal error on "2 or 3 percent". It didn't worked for me. So i decided to do tot mothod.
Download tot file, dll file, LGFlashtool, drivers etc.
Followed whole process which was also described in above post. But when flashtool reached at 94 percent and mobile was being rebooted it showed error
"Fboot check"
"Fboot Check"
"Can't reboot completely"
I tried to turn of phone at this condition by waiting and then doing a factory reset by keys combination but it keeps resetting and rebooting. I searched whole internet but can't find a solution. Can anyone please help me. Because i bought this cellphone a week ago for my friend and i would not be able to face him after showing a sick phone. Please someone help .
Only download mode of phone is working, It also keeps led light on while stuck at logo.
:crying:
Click to expand...
Click to collapse
Did you check the g2 general section on xda? If I remember correctly there some threads about this topic
i can not find my same problem in any thread
semo_medo said:
i can not find my same problem in any thread
Click to expand...
Click to collapse
could it be that your phone is refurbished ? and if its says its a d802 in fact is a ls980.?