Hello, I've searched and searched and I believe this is the first thing that has stumped me. Been rooting my DX since the beginning, and I am trying to install Apex 2.0 RC4. I had been previously on Apex Froyo to retain wireless hotspot, etc. Yesterday I SBF'ed to .602, and then updated to .605, and then rooted with Pete's Motorola Root Tool.
I tried MIUI but it wasn't my thing. SBF'ed all over and now I want to run Apex 2.0 RC4, but it requires kernel [email protected] #2. It appears I should have this as I am on Gingerbread, but I don't. I am still on [email protected] #1 kernel. My baseband is correct at .13P I absolutely can not find any help on this. Any info?
Cheers,
~Pat
I went ahead and installed it, it automatically updated to the right kernel with no issues. Ended in a bootloop upon restart, but was easily fixed with a battery pull and wipe data/cache. Thanks Fab!
The kernel is the same thing on 602 and 605...
And to tether with out the Verizon page... You'll need to install a tether patch...
We have nothing to feat but running out of beer
Related
Hey everyone, so up to yesterday I was running modaco N1 2.0 ROM but trying to install the updated google maps became a pain cause nothing was working. Tried all the solutions on the modaco forum but didn't work for me. Anyways, I decided to go back to stock with root cause I still wanted to be able to USB and wifi tether. Anyways, installed the tether packages and now it says I have an improperly configured kernel. I'm sure this is related to the kernel being stock but I Dont know how to fix the issue. I was hoping someone could guide me. Could I simply pull the kernel out of modaco's/Cyanogen's ROM and push it to my N1? If so, I'd like some help since this is past my knowledge.
Thanks
bump cause I'm hoping someone can help me. I tried following the instructions on google code for updating the kernel to do this but I'm getting this error when doing ismod
insmod: init_module '/sqlite_stmt_journals/bcm4329.ko' failed (Exec format error
hopefully someone can help.
Got it working, the Undervolted kernel will work on stock rom, using the insecure boot image and pushing the wireless module. in the undervolted zip.
First post here but I have searched and read a lot since joining.
I bit the bullet and rooted my hero last night following this guide from regaw_leinadso I guess I can't post links...)
Everything went fine so I then wiped and loaded freshrom 2.1.2 followed by a damage710.zip overclocking file in that order. This also worked fine and I was enjoying the new setup.
The main reason I rooted was for wifi tethering so I tried it out and kept getting a "unable to start tethering, please try again" message. After more reading I found that there was a bug in 212 on superuser permissions. So, I loaded the 212 su fix file and went back to wifi tether. The su permission came up and I selected always allow, was able to connect and all was good. I then tried to stop, su permission came up again, always allow was selected...then the device froze on "stop tethering." The only way for me to get out of this was to pull the battery.
I tried it again, and again it freezes at stop tethering and I have to pull the battery. I tried updating wifi tether with the one that is currently on the market (202) and that version stops at "unable to start tethering" message.
My initial recovery image was 1.5.2. I then did the process again using 1.2.3 with the exact same results.
Am I missing something here?
Thanks
In the dev threads there is a kernel you need to flash to stop it from freezing. I couldn't tell you if it works with your rom though. just have to try it.
Thanks; any idea where or which one it is? I can't seem to find it.
Kcarpenter said:
In the dev threads there is a kernel you need to flash to stop it from freezing. I couldn't tell you if it works with your rom though. just have to try it.
Click to expand...
Click to collapse
Found it. Kernel is in the following thread:
"[KERNEL][OC]Darchstar's GoDmOdE-Darchshizz #15 for senseUI roms - UNDERVOLTED"
hello all,
i have updated to 2.3.4 jvp from js3 telenor
all is fine, battery usage is much much better, no laggs, and no FC/FR..
i have turned on the bluetooth once set the name, and turned it off....
after i rooted and brought backups back,i cant use BT anymore. it just stands and turning on for a min or two, and than goes to TURNED OFF state...
update on the issue: i have recently de-odexed the phone, and the BT worked fine again for the first 3-4 initializations and than it hangs again in the way described above.
any help? any ideas?
i'm willing to try loading a custom modem or kernel to the phone to see if it helps, but as im new to this and didnt quite find the info im looking for. browsing for hours, (and i did ask in some threads to no avail.)
Will loading a custom modem/kernel wipe my data?
is there a solution perhaps?
ty again in advance
Edit: sorry wrong post
You're probably using a custum kernel.
Revert to stock kernel and BT will work
Or you can try my modified stock kernel where BT works fine
i think it is a custom kernel, as it came with CWM. Could it be the CWM thats causing this ?
is ur modified stock kernel rooted?
i would hate to loose cwm backup functions , can it be installed after?
and most important question: Will loading a custom modem/kernel wipe my data?
EDIT: just saw this in CWM
Current Kernel: CF-Root 3.7
There have been problems with CF-Root kernel and Bluetooth. I had the exact same thing.
Take a look at the CF-Root thread
Tried searching the forum but couldn't find anything similar.
I rooted my ideos x5 with super one click, installed clockwork mod (perfect recovery by genekolar) and then installed genekolar's newest cyanogenmod [unofficial]. Tried installing 2 times with different downloads, wiping everything both times but I get no service or battery status. I checked my sim card, battery, booted the phone multiple times and checked my APN settings, the phone just doesn't find anything.
I would like to have gingerbread on my phone without installing the official one.
I also tried the MIUI rom but it stuck to the booting screen blasting that welcome jingle full volume every 3 seconds.
Any solutions?
Thanks!
This has been written for 1000000 times. You must update to official 2.3.5 if you want to use .35 kernel ROMs. If locked bootloader is what scares you then you dont need to worry because blefish already found a way to unlock it (http://forum.xda-developers.com/showthread.php?t=1457490). If you still dont want to update to offcial 2.3.5 then you can use .32 kernel ROMs
Oh, my search-fu wasn't good enough this time. Being noob 'n all. Thank you for informing me! I'll change this to solved and leave it here if anyone else is having the same problem
Thank you!!
Ok, here it goes. let me first say that I am just learning alot of this stuff. I'v had my DX for almost a year now and had it Z4rooted and the tether apk applied in no time at all then came the GB update which was actually pushed onto me. So be it.
I have been watching the forums and reading posts off and on since the update, waiting till another reliable tether patch came out. I have the radiocomm app but was always leery of using it with my limited knowledge in this field.
Today after alot of reading I decided to install Liberty3 v2.0 Gold and did so with no problem whatsoever. then I continued reading and then decided to continue on with 3GHotspot.zip and TBH_DX_Tether_Patch_1.0.zip in that order. I did it through the built in ROM mgr. in liberty3 in the rom toolbox. with reboots in between.
I then went into my apps list and clicked on the new 3G wi-fi tether icon and was immediately shot to my boot screen animation. Thinking this was a fluke I attempted it 2 more times with the same result, Reboot. After this I noticed that I was on 3g data and no longer connected to my home wi-fi router I went in and tried to turn that back on but it won't even try. I'm locked out of wi-fi now as well.
I then turned to my friend google and started looking around and found one post and only one posting listing at mydroidworld post# 35944 that had this link "3GHotspot Unpatch --- Download" but that link was broken because of it being a megaupload link (which we all know was seized by the feds)
I have no idea what to do to rectify this situation. I am all for re-flashing the ROM and plan on doing that but I would like some guidance on this before I start messing things up worse than they already are. are there uninstalls for both of thes zips? if so where? have either of these altered my radios NVM authentication strings with these hacks and patches? can they be undone? please help.
Nope, no uninstalls for those zips. At least not to my knowledge.
Ok, I ended up having to SBf back to .602 with RSDLite 5.4.4 and then take the OTA update to .605.
I then re-flashed the Liberty3 v2.0Gold and then through the built in ROM Mgr. I installed the WugPacked GB Tether Patch.zip and everything worked out great. working free Wi-Fi. Thanks to those that both helped and wanted to help but forgot to post anything in the space provided.
Issue solved.