Found out how to get into the car dock and home dock using a magnet. Might be helpful for people getting third party docks or those of you who want to make their own docks
http://www.youtube.com/watch?v=37rgBuD6llg
So, most other HTC phones use a little magnet trick for the car dock and home dock, but ill be buggered if I can find where to place the magnet for the DHD. Thats not to say it couldnt be integrated into the cable somehow...
Does anyone know how to initiate Car dock and Home dock (without tasker heh), with something like a magnet??
Regards
Jamie
There are many of us in the Nexus 7 community who are looking to build our tablets in to our cars and other places where the power button will not be practically accessible. I am one of those people. I was wondering if anybody had any ideas on how to extend the power button?
The ribbon cable for the power and volume buttons can be seen here: http://www.ifixit.com/Guide/Installing+Nexus+7+Power+&+Volume+Button+Cable/9926/2
The header/connector on the board for the cable looks way too small to solder to and so my latest idea is finding a replacement ribbon cable that I could extend in to a tiny gauge wire and externalize from the case. From what I've been able to find so far, I think this is a ZIF FPC/FFC type ribbon cable and connector? I was thinking of something like this: http://www.mouser.com/ProductDetail...GAEpiMZZMvyL%2b65tEJ/L29YMZjxdjhiuZuU4IfHbXs= But I truly have no idea if this cable will fit? Anybody who's great with PCBs who would like to chime in?
If it helps I found a Molex catalog that has a couple connectors that look similar:
http://www.molex.com/catalog/web_catalog/pdfs/F.pdf
Subscribed!!
Ive been considering the nexus for my car pc aswell. Once i pick mine up i will tear it down and see if a ribbon cable could be either extended or possibly simply cut and have wires soldered to it for external power and volume. I have already designed a power supply for the nexus in the car that would also power a DAC and a HDD. I can provide the part number for the TI power chip that i used if anyone is interested. Its capable of producing 6 amps of current at 5 volts.
physical buttons suck. make all phone with only capacitive buttons,.
Interesting
jllbenson said:
physical buttons suck. make all phone with only capacitive buttons,.
Click to expand...
Click to collapse
How would that make externalizing the buttons as needed in this application any easier..?
irishboym4 said:
Ive been considering the nexus for my car pc aswell. Once i pick mine up i will tear it down and see if a ribbon cable could be either extended or possibly simply cut and have wires soldered to it for external power and volume. I have already designed a power supply for the nexus in the car that would also power a DAC and a HDD. I can provide the part number for the TI power chip that i used if anyone is interested. Its capable of producing 6 amps of current at 5 volts.
Click to expand...
Click to collapse
This is what I ended up doing. I got some good advice from another XDA'er who suggested I just pop the bubble button off the ribbon and solder to the contacts directly. In reality the bubble buttons are on a laminated sticker that I could just peel back. Then I soldered to the pads and pushed the cables out through where the rubber for the power button used to be. So far things seem to be working well, I'm a little weary of how this soldering will survive the swings in temperature being left in the car, but I guess there's only one way to find out. Observe:
dmexs said:
How would that make externalizing the buttons as needed in this application any easier..?
This is what I ended up doing. I got some good advice from another XDA'er who suggested I just pop the bubble button off the ribbon and solder to the contacts directly. In reality the bubble buttons are on a laminated sticker that I could just peel back. Then I soldered to the pads and pushed the cables out through where the rubber for the power button used to be. So far things seem to be working well, I'm a little weary of how this soldering will survive the swings in temperature being left in the car, but I guess there's only one way to find out. Observe:
Click to expand...
Click to collapse
Thats very nicely done. I want to do power and volume for my setup. Did the wire size you use work well or would you recommend smaller? otherwise i will need a separate volume control solution for the system. what do you have your tablet connected to for your amp and speakers?
Thanks. I used a 22 gauge wire, the smaller the better I think, as long as it's not bare. As far as amp, I'm using an aftermarket CD deck with a 3.5mm audio in. So I don't really plan on changing the volume on the tablet itself. I'll probably just keep it at 90% to avoid clipping and then adjust the gain with the CD deck. I haven't put it in my car yet though.
Steering Wheel Controls for Car PC
Has anyone tried the Joycon steering wheel control system with an android yet? It supports HID and no drivers are required for windows. It says that it cannot be programed from a linux or mac computer but just windows. Though once its programed it can be used with linux. Im thinking USB OTG plus this guy and you could control the tablet right from the steering wheel.
The solder will last fine on that job. The only thing I would be concerned about is getting false "presses" from the one lead that's soldered to the middle touching the outside ring. Perhaps just place a piece of electrical tape under it. Your other option might be to go straight from the connector the the flex plugs into. Just use a multimeter to test which pins you need to tap.
Thank you so much.
dmexs said:
How would that make externalizing the buttons as needed in this application any easier..?
This is what I ended up doing. I got some good advice from another XDA'er who suggested I just pop the bubble button off the ribbon and solder to the contacts directly. In reality the bubble buttons are on a laminated sticker that I could just peel back. Then I soldered to the pads and pushed the cables out through where the rubber for the power button used to be. So far things seem to be working well, I'm a little weary of how this soldering will survive the swings in temperature being left in the car, but I guess there's only one way to find out. Observe:
Click to expand...
Click to collapse
I just wanna thank the hell out of you. I have been searching and measuring that tiny little cable for about 2 hours now trying to find a connector and cable the right pitch/pins. Somehow the magical world of google brought me here. A site, despite my post numbers, I frequent very often. I'm installing the tablet in my car as well and I too needed a solution to the power button. Cant believe I didnt think to check here. You posted this just a few days ago. Crazy. Once again thank you. I should be able to pull this off no problem.
---------- Post added at 07:55 AM ---------- Previous post was at 07:49 AM ----------
Oh and by the way any issues with this so far? I dont imagine you have seeing as a switch on the to ends of the wire are doing exactly what the little foil button does. Just wanted to ask though before I commit to this in a couple of days.
I recommend if you are going to put it in a car, it needs some sort of quick release. If any stress is put on that cable, the contacts would either lift or the flex would rip pretty easily. I did my nook soldered straight to the main board and a quick release in the cable between the board and the button. I also did as much as I could to keep the cable from the back housing to board from moving by putting tape and locking the cable down when I put the back housing on.
The first picture shows the main board of the Nook. I just took off the old button and replaced it with my wiring. I used hot glue to keep it from wiggling.You can see the quick releases I used in the second picture. I just pulled them from a donor PC I had laying around.
Being a USB fan, I'd try to see if a custom USB device could do the job.
Just recently I made a USB volume control for Windows.
It works on my Nook Touch too.
Omyn said:
I recommend if you are going to put it in a car, it needs some sort of quick release. If any stress is put on that cable, the contacts would either lift or the flex would rip pretty easily. I did my nook soldered straight to the main board and a quick release in the cable between the board and the button. I also did as much as I could to keep the cable from the back housing to board from moving by putting tape and locking the cable down when I put the back housing on.
The first picture shows the main board of the Nook. I just took off the old button and replaced it with my wiring. I used hot glue to keep it from wiggling.You can see the quick releases I used in the second picture. I just pulled them from a donor PC I had laying around.
Click to expand...
Click to collapse
Exactly. I'm planning on using a male and female molex connector I found at radioshack. Currently I'm trying to figure out some intricacies involving Google Music and external storage but soon I'll have more pictures up here.
dmexs said:
Exactly. I'm planning on using a male and female molex connector I found at radioshack. Currently I'm trying to figure out some intricacies involving Google Music and external storage but soon I'll have more pictures up here.
Click to expand...
Click to collapse
keep us posted on the google music + external storage because i will be doing that soon aswell.
Have you tried connecting a faux USB HID device (like the Arduino Leonardo) and sending arbitrary keycodes while it's "off" to see whether any might be capable of waking it up? I don't know whether that could power it up from a "cold off" state, but I'm 99% sure you could wake it up from "screen off, asleep" that way.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
bitbang3r said:
Have you tried connecting a faux USB HID device (like the Arduino Leonardo) and sending arbitrary keycodes while it's "off" to see whether any might be capable of waking it up? I don't know whether that could power it up from a "cold off" state, but I'm 99% sure you could wake it up from "screen off, asleep" that way.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
I haven't tried this. I've just been using my externalized power button to wake the device from both warm and cold off states. I have a CNX-2140 power supply from my old car PC setup that has an ACPI pulse. I use this to wake the device from a warm sleep.
Thanks you XDA for being here. Just solved half of the problem my friend was having for his tablet . Mounting it in a 2006 Mustang. Now, Gotta see if he can use the POGO for charging and a USB OTG for the external camera
its help!! thanks!
What do you terminate the raw wire ends to now? I'd by looking at mounting some kind of button inside the cab of my vehicle to turn it on/off. What kind of button would a person look for? Thanks
---------- Post added at 09:44 AM ---------- Previous post was at 09:39 AM ----------
dmexs said:
How would that make externalizing the buttons as needed in this application any easier..?
This is what I ended up doing. I got some good advice from another XDA'er who suggested I just pop the bubble button off the ribbon and solder to the contacts directly. In reality the bubble buttons are on a laminated sticker that I could just peel back. Then I soldered to the pads and pushed the cables out through where the rubber for the power button used to be. So far things seem to be working well, I'm a little weary of how this soldering will survive the swings in temperature being left in the car, but I guess there's only one way to find out. Observe:
Click to expand...
Click to collapse
What do you terminate the raw wire ends to now? I'd by looking at mounting some kind of button inside the cab of my vehicle to turn it on/off. What kind of button would a person look for? Thanks
It seems the connector for charging is at the bottom in landscape and in order to charge whilst on a stand you need clearance for the charging plug, unless you have the connector on the top which is not ideal.
Does anyone know of a suitable stand that will hold the Nexus 10 whilst on charge with clearance for the charging plug?
The Belkin Flipblade Adjust should do the trick.
I use it with my Iconia A700 which also has the charging plug at the bottom.
what I have:
A single wire from my apart wall, that connects to the door button, when I use multimeter, it reads 0V - 0.5V AC, when someone press the door button, it raises to 5V AC
I have no access to the door buzzer transformer, and I don't konw when it's isolated or floating or even has a ground
a RPi 2B, some resistor, some capacitors, some sharp817 optoisolators, a breadboard, some jumper wires
What I want to do:
I want to connect this wire through an optoisolators and resistors to the RPi's GPIO, so I can call something like
GPIO.add_event_detect(channel, GPIO.RISING, callback=my_callback) to detect the door button push event
What's my problem:
I have no idea how to exactly make the cirecuit work, especially there is only one AC wire (positive live wire may be?, where's the ground wire?)
please help
and wish everyone merry christmas
I think it would be easier, when you use a schmitt-trigger and control a digital input of the Rpi. Did i understand right, that you only want to detect 0V or 5V ? You are not interestet in voltage levels between ?