After i flashed the the ICS port ROM by Zdizhu with CWM5 ..it does not even boot .the android boot animation keeps on displaying...and now my XREcovery is gone also ...when i press the back button on SE logo , xrecovery does not show up ...what to do plzz HELP !!!!:confu sed: ..On top of that it turns on automatically when battery I is put in ....???? HELP what to do ???
noim said:
After i flashed the the ICS port ROM by Zdizhu with CWM5 ..it does not even boot .the android boot animation keeps on displaying...and now my XREcovery is gone also ...when i press the back button on SE logo , xrecovery does not show up ...what to do plzz HELP !!!!:confu sed: ..On top of that it turns on automatically when battery I is put in ....???? HELP what to do ???
Click to expand...
Click to collapse
Why are u creating a new thread about it when we have already an ICS thread for Q/A,installation,etc and i have answered ur question already here
and u must post questions in Q/A section from next time
Sorry abt this thread ...
I can't Flash the Kernal ....it says Flash aborted .. go to settings>Applications>Enable Debugging Mode ... plz assist !!!!
my phone gets stuck at Bootanimation ....
problem
new port + noobs = bootloop
solution
Repair with pccompanion
result
100% A*
Exactly
sent from my sweet Rachael
Flash FXP kernel and install cyanogenmod 7.2 and see what happens
Sent from my unlocked bootloafer fxp style
Related
my phone reboots and jst stucks on lockscreen ..
it only shows the notification bar and it shows dialoge box [ complete
the action using .launcherpro or .twlauncher ] and it jst vibrates when i
choose and option .. i cant use buttons ... plz help
before last boot i installed launcerpro
help ... plz
( on android 2.2 rooted )
You need a reflash. http://forum.xda-developers.com/showthread.php?t=849028
it simple, just pay attention on what you doing, and make sure to follow all steps.
There are allot of flamers here try putting your questions in the question section were you will get the best help
Permit riders: abu-7abash,carlcj5
attiffe said:
my phone reboots and jst stucks on lockscreen ..
it only shows the notification bar and it shows dialoge box [ complete
the action using .launcherpro or .twlauncher ] and it jst vibrates when i
choose and option .. i cant use buttons ... plz help
before last boot i installed launcerpro
help ... plz
( on android 2.2 rooted )
Click to expand...
Click to collapse
What were you trying to do? Flash a different rom? Follow the link posted a couple replies up and go back to Odin and reflash. You can use the toolbox it comes in handy
http://forum.xda-developers.com/showthread.php?t=954509
nomadrider123 said:
What were you trying to do? Flash a different rom? Follow the link posted a couple replies up and go back to Odin and reflash. You can use the toolbox it comes in handy
http://forum.xda-developers.com/showthread.php?t=954509
Click to expand...
Click to collapse
I installed .launcher pro and rebooted
and on the lockscreen what im getting is black screen
no buttons working only notification bar is visible
and im having repeated vibrations
and every now and then a dialouge box appears which ask me to complete
the action using ( launchr pro or twlauncher )
and also
is there there a way to enable *debugging mode * externally .. bcz on my device i cant get into settings ( bcz buttons not working )
need assistance ---defy just rebooting and rebooting
i installed the rom amanger premium
after that i installed the 2ndInit from market for android and installed the latest version .....and after that i uncheck the usb debugging and restarted the defy
since then its auto rebooting from logo to black screen and back to logo ....
please help me i am new to this and really pissed off .......
Flash stock sbf using RSD lite.
Sent from my MB525 using Tapatalk
jassi32 said:
need assistance ---defy just rebooting and rebooting
i installed the rom amanger premium
after that i installed the 2ndInit from market for android and installed the latest version .....and after that i uncheck the usb debugging and restarted the defy
since then its auto rebooting from logo to black screen and back to logo ....
please help me i am new to this and really pissed off .......
Click to expand...
Click to collapse
Check if the blue led comes on during boot and press down volume button then check the settings if not you gotta install a another rom I suggest nordic ii with cm7 cant go wrong
Sent from my MB525 using xda premium
Thank you guyszzzzzzzzzzz:d:d:d:d:d:d:d:d
hey guys,my first post here....
i am stuck with the infinite reboot loop from moto logo after i tried the 2ndinit install.my phones just a month old and i can use it now
i can get into the stock recovery menu by pressing -vol while booting,nothing is making any difference there.
if i press the +vol key while booting,it goes into bootloader menu,but it says battery low,cannot program. i had just rooted my phone and was trying to take a nandroid backup when this happened.
please help save my defy :-s
BUMP................
Im not a expert nor its will be t best solution, Recharge your battery on another device.. Next , try first turn on defy with vol press down, when android signal logo appears, its not boot logo..., press up & down at same time, then wipe data.. It will reset your data. Another solution its flash any sbf of your taste with rsd lite. There is a tutorial for defy beginers on stickies & defy wiki , its contain all info you will need
Giuliano
Sent from my MB525 using XDA Premium App
i update to cm 7.1 a month ago and i added my phone number in settings.....
and when flashed the sea15 froyo of my country , the phone number is still there .....any help on how to remove it stock rom or else have flash back cm7.1 to erase it ....
i want help i need to send defy for service repair .....please help .....
and thanks in advance ......
im having the same problem month ago i cant figure it out , after installing 2ndinit and the led turn into blue i reboot my device but it keeps rebooting over and over iv been searching xda fourms for one month now for a solution but all in vain , im stuck with 2.2.2 froyo i can't install CM7 or MS2Ginger , i've heard that i have to install bootmenu or something but im not sure how to !! btw once i click install recovery in 2ndinit it says success but i still can read 2ndinit recovery NOT currently installed and when i try to press uninstall it says there is nothing to do!!
please if some 1 can help me it would be a life saver for me
Closed at OP request
[Solved] Cant change rom without SBF file! NO MOre "recovery access through @"
Yes, after a i upgraded using the last Brazilian 2.3.6 Retail rom from motorola http://and-developers.com/sbf:milestone2
i can only change to roms in .sbf files, i tryed many time
the problem: if i put the new rom in sd ok, turn off, press X and than turn on!
see the triangle, press @ but nothing happens, stay in the same screen
and i CANT access the cel cuz i lost my motoblur ID and Pass, and the stupid program blocked the access -_-!
what can i do now? i cant access Recovery to reset and gain access to fone or change rom
sorry bad english
DefaultBR said:
the problem: if i put the new rom in sd ok, turn off, press X and than turn on!
see the triangle, press @ but nothing happens,
Click to expand...
Click to collapse
Is so in Froyo, GingerBread is:
POWER + X... triangle... Vol up + Vol down (at the same time)
try some times press at same time vol+ and vol- on TRIAGLE screen
after some tries you will access the recovery menu
tenta algumas vezes apertar vol+ e vol- juntos e segurar por uns 2s dai tu vai conseguir acessar o menu de recovery
worked fine guys, thanks..
but now i got another problem i changed the rom through the Recovery to the last one from MIUI 2.3.7
after all i got a blank screen, first see motorola logo and got a blank screen and dont start the rom
there is a solution ??
EDIT:
i installed the SBF stock rom to get phone on again!
tryed to install CM7 2.3.7, using the step "From a STOCK ROM"
the same problem, motorola logo after reboot, and 2 sec after a black screen, and stay in this black screen FOREVER!!!!!
returned to the stock sbf 2.3.6 rom !
really, i tried MIUI 2.3.7 and CM7 2.3.7!
but everytime a black screen after motorola logo
Since u r on GB now, u can't use these two ROMs. It is a kernel thing. You can't go back from GB kernel to Froyo kernel and the two ROMs u r trying are on Froyo kernel.
The ones u can use are CM9 and Endless' CM7.
wow, clear for me now this thing of kernel... i was trying the cm7 2.3.7 by TEZET!
so now i have to use this one -> http://forum.xda-developers.com/showthread.php?t=1239778 GB KERNEL 20-Dec by Endless?
this is the last one ported?
thx the answer
DefaultBR said:
wow, clear for me now this thing of kernel... i was trying the cm7 2.3.7 by TEZET!
so now i have to use this one -> http://forum.xda-developers.com/showthread.php?t=1239778 GB KERNEL 20-Dec by Endless?
this is the last one ported?
thx the answer
Click to expand...
Click to collapse
I think yes, latest tezets build is based on old GB kernel (at least so I understand from tezet's post).
Port from Endless7 is pretty stable, but has some minor annoying bugs (in example notifications, that hangs while swipping them right with finger)
i used the CM7 by endless ( http://forum.xda-developers.com/showthread.php?t=1239778 ), but the same problem, now after the logo of motorola with the BUNNY, i got a black screen
really, what im doing wrong
I FLASHED the Fix_sbf from endless topic, but nothing change, it dont stuck in the black screen anymore, it stuck in the motorola logo with the bunny
DefaultBR said:
i used the CM7 by endless ( http://forum.xda-developers.com/showthread.php?t=1239778 ), but the same problem, now after the logo of motorola with the BUNNY, i got a black screen
really, what im doing wrong
I FLASHED the Fix_sbf from endless topic, but nothing change, it dont stuck in the black screen anymore, it stuck in the motorola logo with the bunny
Click to expand...
Click to collapse
try make two wipes in native recovery... (POWER + X... Vol up + Vol down)
VooDooKill said:
try make two wipes in native recovery... (POWER + X... Vol up + Vol down)
Click to expand...
Click to collapse
did it too, reboot, but still stuck at the "bunny+motorola" logo !!
May be you can try this.
1.Flash 2.3.6 SBF.
2.Root & install CWM.
3.Open Endless7's CM7, remove the boot.img, devtree.img.
4.Remove the asserts to push these files from update-script inside META-INF/com/google/android/
5.Repack into a zip file and flash via CWM
5.Wipe data and reboot!!
Did you install this one
Latest version based on defy-cm7:
20111120.2013-ICS-v1.0
to quote from the endless7 cm7 thread
huatz84 said:
This latest build works great on my Milestone2 with previous official GB ROM. Thanks,Endless..You just save us from getting bored.
In case anyone is confused installing this ROM on his Milestone GB kernel:
-First,copy CM72 ROM on the root SD card.
-Enter recovery and wipe data,cache n dalvik cache.
-Choose install zip from SD card and let it finish.
-Reboot system now and you should stuck in black screen.
-Pull out the battery and enter bootloader (up button and power on)
-Open rsd and connect your phone to PC.
-Flash the fixed sbf and your phone should boot after complete.
-Be patient coz first boot will take longer and your phone should restart once.
-Give thanks to Endless or consider giving donations.
Click to expand...
Click to collapse
Just so I know you are using EXACTLY the right files.. got the appropriate links from the thread
Links for ROM
http://www.mirrorcreator.com/files/RMSJGHL2/cm72-111215.1631-NIGHTLY-Milestone2-GB-v1.3.zip_links
http://android.loicg.net/roms/cm72-111215.1631-NIGHTLY-Milestone2-GB-v1.3.zip
Fixed SBF
http://android.loicg.net/roms/fixed-sbf.7z
If you use those files, and the intructions above exactly as it is written, it should work. If that fails... then well ef that
sahilarora911 thx
DreadPirateDan, worked fine, thx a lot, i think i downloaded the wrong rom !
Thxxxxx
lolzor gotta hate when that happens
i had this problem earlier
http://forum.xda-developers.com/showthread.php?t=2593043&page=1
after the help of a mod i was able to flash stock firmware, bootloader, modem,csc n pit ... but after flashing all this. when i restart fone it gets back to where it was earlier.. bricks again n i have to again start it with s4 recovery tool...
when i try to get into recovery mode the gti9505 logo appears n the blue writing on top left corner but then it gets into download mode with a message in red on top left corner saying .. could not do normal boot ...
the mod who was helping me gave me this stock rom https://my.pcloud.com/#page=publink&...5l5dLlC0HwpGJk
i tried .. unticking auto reboot n manually removed battery after firmware flashing n then tried to start but still m bricked .. tried various button combos as well but every tym it says could not do normal boot...
one more thing .. on every boot the pit partition is aslo not there ... like if i try to flash firmware alone then it gives error that no pit partition ...
tried to flash philz touch recovery as well but nothing ...
will kies b any helpful here ??
one more thing .. tell me if the repair shop ppl cud do it so i wil take it there
SunnyGrewal11 said:
i had this problem earlier
http://forum.xda-developers.com/showthread.php?t=2593043&page=1
after the help of a mod i was able to flash stock firmware, bootloader, modem,csc n pit ... but after flashing all this. when i restart fone it gets back to where it was earlier.. bricks again n i have to again start it with s4 recovery tool...
when i try to get into recovery mode the gti9505 logo appears n the blue writing on top left corner but then it gets into download mode with a message in red on top left corner saying .. could not do normal boot ...
the mod who was helping me gave me this stock rom https://my.pcloud.com/#page=publink&...5l5dLlC0HwpGJk
i tried .. unticking auto reboot n manually removed battery after firmware flashing n then tried to start but still m bricked .. tried various button combos as well but every tym it says could not do normal boot...
one more thing .. on every boot the pit partition is aslo not there ... like if i try to flash firmware alone then it gives error that no pit partition ...
tried to flash philz touch recovery as well but nothing ...
one more thing .. tell me if the repair shop ppl cud do it so i wil take it there
Click to expand...
Click to collapse
Hi mate , did you even try the tutorial from here ?http://forum.xda-developers.com/showthread.php?t=2265477 if you already follow this thread try to reflash it again and might fix your problem. have a nice day.
Repulsa said:
Hi mate , did you even try the tutorial from here ?http://forum.xda-developers.com/showthread.php?t=2265477 if you already follow this thread try to reflash it again and might fix your problem. have a nice day.
Click to expand...
Click to collapse
yea .. that mod helped me get upto here.. like earlier i wasnt able to flash firmware as odin was giving errors....the link to the new firmware was also provided by that mod ...
with wat i understood frm my prob .. its like the fone cant retain the installed firmware when it turns off .. :|
SunnyGrewal11 said:
yea .. that mod helped me get upto here.. like earlier i wasnt able to flash firmware as odin was giving errors....the link to the new firmware was also provided by that mod ...
with wat i understood frm my prob .. its like the fone cant retain the installed firmware when it turns off .. :|
Click to expand...
Click to collapse
- Flash this file with ODIN: HERE
- Turn off ur phone
- Use the combination (Vol up + Home button + Power button)
- When u see the letters of Samsung S4 in white... drop the Power button
- If u dont do it by this way u will be stucked in the boot logo
- This will go directly to your CUSTOM RECOVERY
Joku1981 said:
- Flash this file with ODIN: HERE
- Turn off ur phone
- Use the combination (Vol up + Home button + Power button)
- When u see the letters of Samsung S4 in white... drop the Power button
- If u dont do it by this way u will be stucked in the boot logo
- This will go directly to your CUSTOM RECOVERY
Click to expand...
Click to collapse
even after flashing with this file ... i cant boot normally .. like i have to use the s4 recovery tool to start the fone :|
SunnyGrewal11 said:
even after flashing with this file ... i cant boot normally .. like i have to use the s4 recovery tool to start the fone :|
Click to expand...
Click to collapse
But the recovery works for u?
My stupid cousin flashed some . Img file.. Which made my phone into a bootloop.
It only shows the samsung name and goes on in an infinite loop.
I am shattered. My phone is just simply rooted and i run on stock rom 4.3 jb only.
I am a complete NOOB. I donno ****. No custom rom... Or cwm recovery.
I tried wiping cache and factory reset using stock recovery.
I beg u guys... Does any one know how to sovle this thing...?
Please guys i am shatterd... I am a pure noob..
Please explain in detail how to solve guys..
Please..
Jass AndroDude said:
My stupid cousin flashed some . Img file.. Which made my phone into a bootloop.
It only shows the samsung name and goes on in an infinite loop.
I am shattered. My phone is just simply rooted and i run on stock rom 4.3 jb only.
I am a complete NOOB. I donno ****. No custom rom... Or cwm recovery.
I tried wiping cache and factory reset using stock recovery.
I beg u guys... Does any one know how to sovle this thing...?
Please guys i am shatterd... I am a pure noob..
Please explain in detail how to solve guys..
Please..
Click to expand...
Click to collapse
first get yourself prepared for flashing the stock firmware
find out these details first
1. what version of grand 2 are you using g7102 or g7102t or g7106 or g710
2.which country variant phone are you using that is from which country have you bought your phone from
these details are necessary for downloading the stock rom for your phone..
so first get these details first then i would guide you for further process
ps: these info will be at the back of your phone below your battery
& the coutry info will be the coutry were you are using your phone
grohitsurana said:
first get yourself prepared for flashing the stock firmware
find out these details first
1. what version of grand 2 are you using g7102 or g7102t or g7106 or g710
2.which country variant phone are you using that is from which country have you bought your phone from
these details are necessary for downloading the stock rom for your phone..
so first get these details first then i would guide you for further process
ps: these info will be at the back of your phone below your battery
& the coutry info will be the coutry were you are using your phone
Click to expand...
Click to collapse
I am using g7102.. Made in vietnam....but i am in the middleeast country.....bahrain.
Could u please help me through the complete proces....?
After googling it i camr to know that it is just a softbrick..even after wiping cache and doing a factoy reset...it still goes on in a boot loop...
Please dude....after hours of googling....every where i see the word odin!!!
I am also ok with installing the gennxt s5port rom for grand 2....
I trust you buddy!!!!
I dont have cwm recovry or sumthing...just stock recovery
noob fiendly firmware flash & update
Jass AndroDude said:
I am using g7102.. Made in vietnam....but i am in the middleeast country.....bahrain.
Could u please help me through the complete proces....?
After googling it i camr to know that it is just a softbrick..even after wiping cache and doing a factoy reset...it still goes on in a boot loop...
Please dude....after hours of googling....every where i see the word odin!!!
I am also ok with installing the gennxt s5port rom for grand 2....
I trust you buddy!!!!
I dont have cwm recovry or sumthing...just stock recovery
Click to expand...
Click to collapse
Dont worry everything will be allright just follow these steps
1.first go to this link ww.sammobile.com & regiter yourself
2.then after registering & login go to this link http://www.sammobile.com/firmwares/download/38736/G7102XXUBNK2_G7102OJVBNK2_KSA/ & download the firmware
.after downloading the firmware extract it at the desktop
3. downlad odin.zip from the attachments in this post & extract it
4.then go to the extracted odin folder & open Odin3 v3.09.exe click ap button on right side & browse to the folder where you extracted the dowloaded firmware in point no :2 & select the md5 file then wait for few minutes it will take some time to be uploaded to odin
4.after it is uploaded to odin tick the boxes on the left side f.reset time,below that nand erase all & below that phone boot loader update & phone efs clear & also select tick near ap button check only these boxes are ticked nothing else should be ticked other than these
5.then switch off your phone by taking the battery out for few sec then press volume down key+power key for few seconds you will enter dowload mode after that press volume up key you will see a screen with something like
odin mode
product name etc...
6.now connect your phone to your pc /laptop you will see blue colour below id:com on upper left corner saying some com port that means your phone is connected
7.now press the start button & let it flash the firmware to your phone after completely flashing the firmware there will something written as res-ok in the message column now disconnect the cable form pc
8.now remove the battery of the phone for few sec & insert it back & go directly to recovery menu by pressing the volume up key +home key+power key let it update the recovery of the phone after that you will see samsung logo at that time remove the battery again & insert it back.
9.now agan go back to recover menu by pressing the volume up key +home key+power key this time do factory reset & wipe cache & restart your phone
10 voila you have sucessfully recovered your soft brickd phone after all this steps & you will be in the latest firmware android 4.4.2 for our phone
Hope i helped you
Jass AndroDude said:
My stupid cousin flashed some . Img file.. Which made my phone into a bootloop.
It only shows the samsung name and goes on in an infinite loop.
I am shattered. My phone is just simply rooted and i run on stock rom 4.3 jb only.
I am a complete NOOB. I donno ****. No custom rom... Or cwm recovery.
I tried wiping cache and factory reset using stock recovery.
I beg u guys... Does any one know how to sovle this thing...?
Please guys i am shatterd... I am a pure noob..
Please explain in detail how to solve guys..
Please..
Click to expand...
Click to collapse
Whenever this happens always keep calm have patience and don't get tensed , it happens with many people , it's normal . Now what everyone does when this happens is flash the stock firmware via Odin , just follow the above procedure by grohitsurana it takes time , (like 10-15 mins ) but it will recover your phone.
No need to freak out ! bootloops are no stranger to us all ! grohitsurana perfectly explained what you need to do ! good luck and relax !
Jass AndroDude said:
My stupid cousin flashed some . Img file.. Which made my phone into a bootloop.
It only shows the samsung name and goes on in an infinite loop.
I am shattered. My phone is just simply rooted and i run on stock rom 4.3 jb only.
I am a complete NOOB. I donno ****. No custom rom... Or cwm recovery.
I tried wiping cache and factory reset using stock recovery.
I beg u guys... Does any one know how to sovle this thing...?
Please guys i am shatterd... I am a pure noob..
Please explain in detail how to solve guys..
Please..
Click to expand...
Click to collapse
Hey awesome dude........i reallly feel happy......i was really tensed.....coz this was my first ever fone u noe......we all know that feel ryt????
Thanks x 99999999999999999999999999999999999999999999999
But although it worked fine it took up a lot of space i feel. I have a grand 2 with 8 gb internal memory. But now i am accesible only to 5.1 gb. I dont think it was this less earlier.
Did i do a mistake somewhere...? I did a cache wipe and factory reset before installing the new stock firmware...
Help me out guys!
Thanking you in advance