Received the update notification this morning, happily started downloading and installation.
Like some out there, the tablet rebooted and it seemed to install but up to about 1/4 progress it froze with a central honeycomb logo with exclamation mark. Thought it was part of the process, left alone for an hour but nothing happened, hence rebooted with a notification of 'update failed'.
Searching through google and xda forum the last 2 hours -- have tried the unrooting the device, plugging in to power, removing sd card to no avail.
Someone has also suggested to restore wpa_supplicant file under system/bin. I don't remember altering the file at all, and when I check the file it is dated 29/3/2010... i bought my device in April, hence assuming it has not been altered either by myself or from any app. Like wise for the telephony files as well, as I haven't changed anything to try to stop the cell standby issue to improve battery life.
I am left with no options unless someone has a better idea. I have not uninstalled any pre-loaded apps. Rooted with Gingerbread (and as I said tried unrooted and re-rooted without success in updating).
Thoughts?
Current build:
Android version 3.0.1
Kernel 2.6.36.3
Build no. Acer_A500_1.139.04_COM_GEN1
Failed system update to 4.010.24
I am located in Melbourne, Australia.
(Last thing would be to download the actual rom and update via CWM.)
open /cache/recovery/last_log on your tablet use root explorer
ypu will know whats wrong
I'm in Melb too, and that particular update has failed to download about 5 times now, and when it finally downloaded, it came up with a message saying "update invalid" or something along those lines. I'm gonna wait til I get home to try and update again.
altering WPA_Supplicant file is something you would've done so your tab would connect to ad hoc networks. Must be something else.. did you alter any other files? I'm working on this same issue. frustrating as f*#%
I was running stock rooted 3.01 and was failing updates over and over until I flashed back to the stock recovery using the Acer recovery apk. As soon as I did that and tried the ota update again it worked right away... once 3.1 was installed I rerooted using iconia root 2.1 and flashed cwrecovery back to tablet... let me know if this helped
acorsino said:
I was running stock rooted 3.01 and was failing updates over and over until I flashed back to the stock recovery using the Acer recovery apk. As soon as I did that and tried the ota update again it worked right away... once 3.1 was installed I rerooted using iconia root 2.1 and flashed cwrecovery back to tablet... let me know if this helped
Click to expand...
Click to collapse
Same for me. Had to go back to stock recovery for the OTA update to work.
Mine failed the first time. I rebooted and it worked the second time.
I tried using Acer Recovery Installer 1.5, checking Stock USA 1.141.07_COM_GEN1 and touched "install recovery image", rebooted, and nothing happened?
My build number remains 1.139.04_COM_GEN1
I am sure I have missed something...
Tried downloading and installing the 5th time, still failed and stuck at the same progress bar of 1/4 followed by that annoying honeycomb with exclamation mark logo.
mashilu said:
I tried using Acer Recovery Installer 1.5, checking Stock USA 1.141.07_COM_GEN1 and touched "install recovery image", rebooted, and nothing happened?
My build number remains 1.139.04_COM_GEN1
I am sure I have missed something...
Tried downloading and installing the 5th time, still failed and stuck at the same progress bar of 1/4 followed by that annoying honeycomb with exclamation mark logo.
Click to expand...
Click to collapse
If you see the little bee fail screen, it is not the stock recovery, but still CWM.
mashilu said:
Received the update notification this morning, happily started downloading and installation.
Like some out there, the tablet rebooted and it seemed to install but up to about 1/4 progress it froze with a central honeycomb logo with exclamation mark. Thought it was part of the process, left alone for an hour but nothing happened, hence rebooted with a notification of 'update failed'.
Searching through google and xda forum the last 2 hours -- have tried the unrooting the device, plugging in to power, removing sd card to no avail.
Someone has also suggested to restore wpa_supplicant file under system/bin. I don't remember altering the file at all, and when I check the file it is dated 29/3/2010... i bought my device in April, hence assuming it has not been altered either by myself or from any app. Like wise for the telephony files as well, as I haven't changed anything to try to stop the cell standby issue to improve battery life.
I am left with no options unless someone has a better idea. I have not uninstalled any pre-loaded apps. Rooted with Gingerbread (and as I said tried unrooted and re-rooted without success in updating).
Thoughts?
Current build:
Android version 3.0.1
Kernel 2.6.36.3
Build no. Acer_A500_1.139.04_COM_GEN1
Failed system update to 4.010.24
I am located in Melbourne, Australia.
(Last thing would be to download the actual rom and update via CWM.)
Click to expand...
Click to collapse
Hi .. try to do that...
the uploaded file helped and solved my issue..i'm now running Honeycomb 3.1
Solution posted by Bob here: (correct the link below "www")
w w w.androidtablets.net/forum/acer-iconia-tab-a500-forum/18444-update-failed-help.html
Here's the WPA_Supplicant from my A500, after the 3.1 update. Hope this works for you guys.
I'm not sure what the extension is for the A500, but I had to add .zip to be able to upload it. Try removing the .zip before using it. Also, remove the 'original'. I added that to keep it straight on my tablet.
Good Luck.
Bob
p.s: sorry i'm a newbie here and can't post link outside the forum at the moment..
just follow the steps described by Bob!
I did see that different logo, which I subsequently rebooted as I thought it's frozen again.
Interestingly, I tried to push for another system update, attempt no. 7, and now, it progresses and complete update!!! Woo hoo!
Thanks for all the help. I still don't know which one sorts what out though... Cheers!
Hi all,
I'm having a little problem. I have researched but everything I've found leads me back to square one...
So I followed this guide to installing CM7 on my M2. Please note that I have in the past successfully rooted my phone, installed the Argenstone ROM and one other basic Great Britain Rom. So I'm not a total nub. However at this stage I have a phone that's is useless to me...
My phone is rooted. I have Droid2Bootstapper installed and I managed to get the CWM 3.X installed. I downloaded the all-in-one.zip file from the CM7 ROM thread (the zip is actually called EndlessCM7-110901-nightly_build.zip - hope that's not an issue?)
I booted into CWM and applied the EndlessCM7-110901-nightly_build.zip and after (without a reboot) wiped everything (I had backed it up previously).
I rebooted the phone and...well I get the Google logo with the Motorola M and the Cyanogen bot as the 2 'O' characters. Then after a while a 3D rotating 'square' and the android writing and logo 'shimmering' in and out but that just goes on forever. I left it for an hour at one point and just gave up.
Now I can't even get past the Google logo. I've tried restoring my previous back up but that won't work either. I can't boot into the OS to actually use RSD lite to flash a known working ROM over the top.
When the LED turns blue and I hit the volume key it displays "Android BootMenu <v1.0.3>" which is different to the CWM 3.X that I was getting prior to applying the EndlessCM7-110901-nightly_build.zip file.
From here I can select to recover the last 'latest recovery' which when done loads into CWM-based Recovery v4.0.1.6-defy.
Basically I'm at this point where I seem to be able to load just about every boot menu under the sun and do everything but actually launch the damn OS.
How can I get out of this hole? Preferably I'd like to get everything back to the stock ROM the phone came with so that I can start from scratch again.
Any bodies help would be more than appreciated.
Cheers,
- Matt
EDIT: I have even used CWM 4.X+ to try and restore the Argenstone ROM. it goes through the whole process of checking the MD5 sums, restoring the system and boot images etc and seems to work without any issues. I then wipe all data and reboot. Nothing - still the same cyanogen Google logo and the only thing I can do is boot into all the CWM menus.
*sigh*
Argh feel like a true idiot now. It took me about an hour of searching earlier but I've only just found/remembered how to get RSD lite to see my phone (pwr+volume+camera) and I'm wiping the whole thing to the factory (vodafone) ROM. Might take the opportunity to take it to Vodafone and tell them it never gets a damn 3G connection lol...provided this flash works (touch wood).
Hello,
I have a nook color with version 1.4.0
I rooted it when I bough it few years ago and didn't use is much since then.
Today I reset it to factory default with the 8 times restart interruption method.
It works ok but I'm not getting the version update through the WIFI and when copying the zip file nothing happens as well.
I tried to copy an old update, 1.4.1 but it didn't help.
Any suggestions?
First of all, hello all!
I'm a new member here.
So, what's the problem? Well, I recently rooted my Galaxy Tab 4 SM-T530 (WiFi only version) with Kingroot. Then I installed Cyanogenmod from the thread listed at the ROM section. All was working fine up until I decided to flash the GApps.
I chose the newest versions (both Zero and Mini for 6.0) but none of them worked.
Flashing went well. The problem was after booting.
After the first boot, I'd get caught in an endless loop of errors stating that "Unfortunately, Setup Wizard has stopped working". I couldn't do much other than rebooting. But then, I was greeted with yet another problem: it was stuck in a boot loop. Basically, after saying that it "Prepared Google App" and some others, the tab would repeat the process in an infinite loop. I left it for half an hour to do so, but the problem persisted.
Keep in mind the fact that I installed the newest version of Mini GApps package provided from that thread.
If any of you can help me out with this, I'd be very thankful, since this is the same time I install a custom ROM, and I really don't want to come back to the old Samsung ROM
http://forum.xda-developers.com/tab-4/development/rom-slimrom-5-0-1-alpha-0-7-t2963906
This is from where I installed all things needed.
Try again, this time flash both zips at the same time and not doing anything in the middle of both flashes. The usual cause of the same error in my other s3 is booting the ROM up, going back to recovery, then flashing GApps.
I never did anything else. Now I wiped data/dalvik/system/cache, reflashed the ROM and now just finished reflashing both zips in TWRP (first Mini then Zero, can't do them at the same time).
Now, I'm pretty much 'fingers crossed', as this is what an error told me. Pretty much tried to flash the zips without wiping anything/reflashing the ROM. That's why I went for a clean install.
EDIT: it didn't work at all. Still caught in the same "Preparing app x" boot loop. Now I'll let it run for 6 hours and see if not my own impatience is the problem.
EDIT 2: For some reason it took ages to boot up. Now, when I finished booting, I saw that the Play Store, Quick Search Bar and the Google Services weren't working at all. I tried to manually update them, but ended up in an agonizing loop of "Unfortunately, Google Services Framework has stopped" errors. Again, this leads me into thinking that the GApps from that thread aren't working.
So tl;dr version - i was using my tablet, saw an update to magisk, installed it, now it boots to black screen while running sambones rom
[SM-P580] [BQK1] SaMBoNeS
TWRP 3.2.3.0 --> 3.3.1.0
longer story:
i was trying to get a game to run, it wasnt...and realized it has been a while for a restart, so i checked to see if anything needs to be updated and saw magisk needed an update. i didnt note what version it was before but it was a version or two earlier than what it was trying to install.
rebooted to blackscreen no samsung logo
have tried restarting a dozen times, booted to TWRP, tried to force normal system boot through the UI, nothing.
I tried installing a new kernal [SiriKernel], it made it to the samsung logo, waited 15 - 20 minutes and it never made it past. restored a backup using TWRP
updated TWRP to 3.3.1.0, still no luck.
i had this problem a long time ago, and cannot figure out how i fixed it....it may have fixed itself but it isnt this time. any advice would be appreciated. I am trying to avoid wiping and starting again if at all possible because the problem seems familiar. also trying to stick to a rom for use with adaptive storage. if i do have to wipe if that can be done on a newer stock OS that's fine as well but last time i messed with this tablet it wasnt