Related
Hi
I have tried to install android on my phone and after a few attempts I finally got to the step where to install Android which works fine.
But after first boot it is written that it may take upto 20 minutes.... I have tried with different kernels with same results.... it simply stops after GO GO GO then it comes to the android screen and nothing happens... I have tried to let it be for 5 hours... still no reaction!
What I do is to copy the .zip file to my SD card and go to to the boot menu and coose "Install from zip file on SD card".
Any good ideas how to solve it?
PeterSvendsen said:
Hi
I have tried to install android on my phone and after a few attempts I finally got to the step where to install Android which works fine.
But after first boot it is written that it may take upto 20 minutes.... I have tried with different kernels with same results.... it simply stops after GO GO GO then it comes to the android screen and nothing happens... I have tried to let it be for 5 hours... still no reaction!
What I do is to copy the .zip file to my SD card and go to to the boot menu and coose "Install from zip file on SD card".
Any good ideas how to solve it?
Click to expand...
Click to collapse
You need to provide more details for folks around here to reply. Ie:
1. Which model are you using - LEO512 or LEO1024
2. Which MAGLDR was flashed. Version 1.13? Because earlier version had the freeze at GOGOGO! problem.
3. Which android build did you use (DAF build type or CWR type?)
Only then we can even start to suggest what to do to help you
Wait....Are you using builds that requires SDCards to be partitioned? If yes, did you partition as required?
PeterSvendsen said:
Hi
I have tried to install android on my phone and after a few attempts I finally got to the step where to install Android which works fine.
But after first boot it is written that it may take upto 20 minutes.... I have tried with different kernels with same results.... it simply stops after GO GO GO then it comes to the android screen and nothing happens... I have tried to let it be for 5 hours... still no reaction!
What I do is to copy the .zip file to my SD card and go to to the boot menu and coose "Install from zip file on SD card".
Any good ideas how to solve it?
Click to expand...
Click to collapse
Mate,
I experience that too. I think not all ROM can be successfully boot.
My suggestions is either try reflashing or find another ROM that works for your HD2.
Cheers
silverwind said:
Mate,
I experience that too. I think not all ROM can be successfully boot.
My suggestions is either try reflashing or find another ROM that works for your HD2.
Cheers
Click to expand...
Click to collapse
Thats odd.... I only know that the experience may vary across different units (ie: wake-up lag, power drain, etc). Never have i heard that not all builds can be successfully booted. I still think the problems has to do with settings (i.e.: config.txt, NAND partition layout, SD Card partition size and formats etc).
If you have a prob with the builds, please specify clearly which version and your configurations. Only then folks here can advice accordingly....
can't hurt...
task 29, WM6.5 rom installation, magdlr installation then flash the rom again
make shure you created ext partition on SD if required for making work the ROM (check its trhead)....
Do a fresh installation(Format SD->Task 29->Flash Radio->Flash MAGLDR->Flash CWM->Flash ROM from zip using AD recovery option in MAGLDR.. Maybe you are using an incompatible radio?
if i have this problem, i flash windows back (LEOIMG.nbh is always on my sdcard).
this will help me.
after one "no-function"-flash dont try an other flash by the same config like the config before.
I think that problem is in kernel . you trying kernel for new desire, use for N1.
tidus18 said:
You need to provide more details for folks around here to reply. Ie:
1. Which model are you using - LEO512 or LEO1024
2. Which MAGLDR was flashed. Version 1.13? Because earlier version had the freeze at GOGOGO! problem.
3. Which android build did you use (DAF build type or CWR type?)
Only then we can even start to suggest what to do to help you
Wait....Are you using builds that requires SDCards to be partitioned? If yes, did you partition as required?
Click to expand...
Click to collapse
Hi
I have no idea if it is a 1024 or 512! How do I find out?
I use MAGLDR 1.13
I have tried to install
RAFDROID HD 4.0.2|Fastest Full DesHD|DATA2EXT|[Rafpigna 1.8 OC]
[LEO512][LEO1024]CMYLXGOs Stock Desire HD(2)[RUU1.84][RAFPIGNA 1.9OC]
and more
All with same result
I have tried to do the sd partition... .actually with 2 diffent cards but I have never been able to have 2 partitions.... I alway ends up with 1 partition on 2Gb
---
Do a fresh installation(Format SD->Task 29->Flash Radio->Flash MAGLDR->Flash CWM->Flash ROM from zip using AD recovery option in MAGLDR.. Maybe you are using an incompatible radio?
---
I tried that as well with same results
Do you recomment a specific android?
I'm totally new in this and only want a android on my phone )
tidus18 said:
Thats odd.... I only know that the experience may vary across different units (ie: wake-up lag, power drain, etc). Never have i heard that not all builds can be successfully booted. I still think the problems has to do with settings (i.e.: config.txt, NAND partition layout, SD Card partition size and formats etc).
If you have a prob with the builds, please specify clearly which version and your configurations. Only then folks here can advice accordingly....
Click to expand...
Click to collapse
I m trying to say that so many ROMs are available here.
Dont spend your time to long only to one ROM
Unless it is your favorite ROM (Chef)
Cheers...
i guess you did a ROM flash through clockworkmod? if so, did you flash the correct partition sizes (sense roms need often about 400mb /system partition). If not you need to find the 400mb clockwork recovery in this forum.
If you flashed a rom via DAF, please disregard this.
also please post in the correct forum (Q and A would be correct for this topic i believe)
joshman99 said:
i guess you did a ROM flash through clockworkmod? if so, did you flash the correct partition sizes (sense roms need often about 400mb /system partition). If not you need to find the 400mb clockwork recovery in this forum.
If you flashed a rom via DAF, please disregard this.
also please post in the correct forum (Q and A would be correct for this topic i believe)
Click to expand...
Click to collapse
Hi
I have tried to do it by DAF (reports size to big?!) and clockworkmod I have also tried with
Sorry about the trong forum, you're absolutly correct...
Update
I have now bought a new sd micro card to make a correct partition.. but I experience exactly the same... error I cant..
With program do you recomment?
PeterSvendsen said:
Hi
I have tried to do it by DAF (reports size to big?!) and clockworkmod I have also tried with
Sorry about the trong forum, you're absolutly correct...
Update
I have now bought a new sd micro card to make a correct partition.. but I experience exactly the same... error I cant..
With program do you recomment?
Click to expand...
Click to collapse
check this thread http://forum.xda-developers.com/showthread.php?t=981811 task 29 is reccommended do u have red and green call buttons on ur hd 2 or rather t mobile on top of ur screen
than we can help u accordingly
remember a wrong cwm partition might be responsible for bootloop
go for hyperdroidv10 rom it s amazing and use 135 or 150 cwm partition
shhbz said:
check this thread http://forum.xda-developers.com/showthread.php?t=981811 task 29 is reccommended do u have red and green call buttons on ur hd 2 or rather t mobile on top of ur screen
than we can help u accordingly
remember a wrong cwm partition might be responsible for bootloop
go for hyperdroidv10 rom it s amazing and use 135 or 150 cwm partition
Click to expand...
Click to collapse
use panasnic sd fromatter and frmat
http://forum.xda-developers.com/showthread.php?t=905089
or use mini partition tool
cwm is the best method to install android rom
sorry wrong quote
shhbz said:
check this thread http://forum.xda-developers.com/showthread.php?t=981811 task 29 is reccommended do u have red and green call buttons on ur hd 2 or rather t mobile on top of ur screen
than we can help u accordingly
remember a wrong cwm partition might be responsible for bootloop
go for hyperdroidv10 rom it s amazing and use 135 or 150 cwm partition
Click to expand...
Click to collapse
I have done a task29 several times already.
---
.... or rather t mobile on top of ur screen
---
I'm not sure what you ask me about. But no on my phone my call buttons is black and gray
By using panasonic formatter I only format... but the card is on 8Gb so guess I need to make a partition.
Mini partition tool doesnt work correct it report errors as soon as I ftry to format etx3
If your phone has T-mobile on top and buttons are colored red & grees - its LEO1024.
If all grey without any logo on its case/housing - then its LEO512/EURO model.
difference is the NAND size. LEO1024 has 1GB and LEO512 has 512MB.
Peter,
I'll quickly write the outline here, hopefully it helps. But detailed guide on each subject has been posted numerous times here. Please look for them.
Outline to get RAFDROID up and running (Based on your post, im assuming yours is LEO512)
1. Flash MAGLDR 1.13 (this involves entering tricolor screen and flashing like good'ol WM6.5)
2. From MAGLDR, choose USB Flasher mode (Option 4 i think...) and flash Clockwork Mod Recovery with 400MB layout. (this is important, wrong layout will cause bootloop and androd will not boot)
3. Assuming you have 2GB microSD card - Use a memcard reader and connect it to your PC. Dont use mass-storage option from MAGLDR. Launch Minitool Partition and create 1GB FAT32 Primary partiton followed by 1GB EXT3 with 4096 block size primary partition. This process is not as complicated as it may sound
4. Put the downloaded RAFDROID CWR zip file into the FAT32 partition. (When the partitioning is complete, windows will only see 1GB in your microSD. The 2nd 1GB EXT3 partition will only be available to android, so dont worry about it)
5.Once done, pop you microsd in your LEO, and choose Recovery option from menu. Once you enter the recovery menu, choose Install from ZIP file and choose the RAFDROID zip file that you have just put in.
6. Wait, and choose reboot. Whole process should be about 20 min.
7. Enjoy your android
Guys, please add anything if i missed out any steps
PeterSvendsen said:
I have done a task29 several times already.
---
.... or rather t mobile on top of ur screen
---
I'm not sure what you ask me about. But no on my phone my call buttons is black and gray
By using panasonic formatter I only format... but the card is on 8Gb so guess I need to make a partition.
Mini partition tool doesnt work correct it report errors as soon as I ftry to format etx3
Click to expand...
Click to collapse
ok if u have performed task 29
install stock rom having spl 2.08 or less
install hspl 2.08
install malgdr 1.13
install cwm depending on the rom u want to use (it must be mention in the thread which one to go for)
transfer the zip file from pc to mmc card by mounting the card orelse use card reader to transfer the files
go into malgdr option and install from zip
note:create 1024 ext3 or ext4 leaving the rest in fat format
http://forum.xda-developers.com/showthread.php?t=905089 (the best way to parttition)
or http://forum.xda-developers.com/showthread.php?t=910000
or http://forum.xda-developers.com/showthread.php?t=905145
or http://www.youtube.com/watch?v=9d7qhBpCJQc&feature=player_embedded
this is the best method to format your card in order of your requirement
do these steps of formating before instaling cwm or before doing any other steps
and 1 more thing u have a 512 leo euro hd 2 so read these guides here
http://forum.xda-developers.com/showthread.php?t=609477
u wil get all information for stock rom /correct radio and every stuff in the above thread
hope your probelem gets solved this time if u need any more help let me know
remeber if you have hspl 3.03 u cant install android so use stock rom with spl 2.08 and install hspl 2.08 later
i wouls suggest to use hyperdroid http://forum.xda-developers.com/showthread.php?t=918899 as its the best after MDJ built
great battery,speed,smooth,etc no errors but if you want to try froyo built than you are checking the right thread
can someone link me a how to or guide, i have the android on my sd running smoothly but i beed a guide on how to install it to the phones internal memory, i mean do i have to install windows stock rom in order to get it on the phone? or can i install it like it is now??? i just dont see any info on this partiicalluar situation
you cant (easily) move an sd build onto nand. You would probably do better to backup your contacts and stuff and go find a NAND rom you like the look of. start fresh.
i guess what im asking is there anything i need to do to prepare the device for the internal android install? i dont wanna copy and paste the install from sd to internal but im asking do i need to install windows 6.5 the original rom first or ican i just flasj it aka load it how my phone is now??? this i havent encoutered yet, and i want to make sure im doing all my steps right, if i need to just find a rom (NAND) and install it how they say???
and btw, the sd andorid version said it was nand but just on a sd build, weird huh? lol im also hearing that some of the sd builds are running faster than the NAND internal ones, can anyone speak of this?
ah well you may find that there are two download links in the thread perhaps? cant really comment, never taken much notice of sd android, , it never worked through haret/winmo for me, so i went straight to nand.
im using the gingerbread 2.3.7. by the way, is there any new ones or ones that you reccomend? im not picky just want somethign stable, fast and nice, htc sense or not doesnt matter let me know NAND btw
geezy21unc said:
im using the gingerbread 2.3.7. by the way, is there any new ones or ones that you reccomend? im not picky just want somethign stable, fast and nice, htc sense or not doesnt matter let me know NAND btw
Click to expand...
Click to collapse
which one? half the roms are 2.3.7, just saying 'im on gingerbread 2.3.7' doesnt help much, , ,, far better to give the name, since there are so many variants.
here is the one i have
http://hottipscentral.com/how-to-install-android-gingerbread-2-3-7-on-the-t-mobile-htc-hd2/
is that the process you followed? If yes, then its already on nand rom. That article is about flashing typhoon (one of the most popular roms) to nand.
yes i followed it to a Tee, lol so your saying its already on the internal phone memory??? ok then so your saying i can take out my SD and it will still boot? hmmm and typoon is what the zip file i have says, can you help me a bit further im following you so far but want to make sure im seeing this right and doiong it step by step thx for replying
watch the video at the bottom of the page from youtube thats on there, thats the step i followed
sorry this is the one i have installed not sure how i got the other , but this is the correct one :Cyanogen MOD 7 Gingerbread 2.3.7
yea thats NAND. there isn't an sd version of typhoon.
yes you can take your sd out and it should boot. (if you have an EXT partition on your sd card ((i didn't watch the whole vid, but it wasn't mentioned)) then any apps you have installed wont be there till you reinsert teh sd card.)
you need to read read read, there are four or five important parts to nand android.
bookmark THIS starting point, and start browsing threads in the Q&A section and NAND development.
basically, your key components are
hspl 2.08.hspl - don't touch this again, android wont work on any other.
radio - fine, you wont need to touch this again any time soon, as with the hspl.
magldr, hold power to start it, the only option you will use is 8 - ad recovery, which starts cwm
cwm (cwr, clockworkmod clockwork, clockwork recovery) which is what starts when you choose AD recovery in magldr, you flash your roms from here, wipe your data from here, factory reset (back to android, not a real factory reset), , you can usb transfer in cwm, the one in magldr corrupts large files.
The cwm 'partition size' is 150 ( i think thats what he chose?) This is the inportant piece of info you need if changing to a different rom, since different roms need different sized system partitions.
You can change this in the tookit you used.
thx thx and thx!!! thats what i needed to know
Check out EasyAndroid, with it you can flash NAND Android from stock HD2 in 30min.
I like useing the clk loader as you do not see it load as you boot the phone, and you can use the android boot to recovery option.
if you already have and SD Android i would download TitaniumBackup and make a backup of all of your aps, as you can use this to save your aps across any Android Rom.
Have fun with NAND Android,
ive thanked everyone that has responded to this thread why does my thanks meter still say 0...lame
geezy21unc said:
ive thanked everyone that has responded to this thread why does my thanks meter still say 0...lame
Click to expand...
Click to collapse
Lol mate, that's how many thanks you've received, not how many people you've thanked. i.e. if someone thanks you, your thanks meter increases. If you thank someone else, nothing is affected for you, only for the other person. Hope that's cleared it up
geezy21unc said:
ive thanked everyone that has responded to this thread why does my thanks meter still say 0...lame
Click to expand...
Click to collapse
Don't get mad bro As soon as you understand all these NAND and android things you can help new members, they will thank you when you help them
Hey guys, I;m appealing for a little help here.
I have an HTC HD2 which has been great for about a year but all of a sudden it has problems.
I;ve been using this rom pretty much since it came out....
http://forum.xda-developers.com/showthread.php?t=905060
I;ve never had any problems with it untill now. I started to get the "insufficient storeage space available" message on it so I assumed a restore/reflash would solve the problem.
I used HD2 toolkit to resize my MAGLDR partition to 450MB & reflashed - the phone wouldnt boot. Stuck on the HTC logo.
Repartitioned to 400 - still no boot!
Repartitioned to 350 - still no boot!
Repartitioned to 300MB - phone now boots however now, I;ve installed no apps & when I try to install spotify, its telling me insufficient storeage available, again! With nothing on the phone except the ROM!
I'm a bit of a n00b with all this stuff, but had my HD2 running fine for ages & its frustrating me that now it wont work properly!
Anyone care to help? THanks, Cardz.
Edit: im using MAGLDR 1.13 & the latest Clockwork mod to flash the ROM. I'm wiping cache & data partitions every time...... :/
Install it with as lower as possible space for system partition. In your case it shoud be 135MB of system partition and 2MB cache but I recommend to put some more of space for system partition as I had some problems with low system partition so you can put 150MB for system partition.
The simple explanation of why you dont have enough of space for apps is that you gave too much of space for system partition and simply this ROM does not require that much of space for system partition. And other space left in your phone memory will be used for apps etc.
EDIT: And also try to install MAGLDR and CWM manually if you can and when you install CWM edit flash.cfg in WordPad or other text editing tool before you flash CWM and edit system partition size to 150MB and Cache size to 2MB
jan.selep said:
EDIT: And also try to install MAGLDR and CWM manually if you can and when you install CWM edit flash.cfg in WordPad or other text editing tool before you flash CWM and edit system partition size to 150MB and Cache size to 2MB
Click to expand...
Click to collapse
Thanks a lot for the reply, i understand now about the 150MB/2MB cache, but what is the point of this other bit? Could you explain more the purpose of this?>
cardyology said:
Thanks a lot for the reply, i understand now about the 150MB/2MB cache, but what is the point of this other bit? Could you explain more the purpose of this?>
Click to expand...
Click to collapse
Well to simply explain you why i wrote you to use manual installation of CLOCKWORKMOD RECOVERY was that I wanted to explain you how is it working with partitioning your nand memory using cwr or magldr. I just added some helpfull info for you from my experience with HD2 and android flashing. So in the future you will know what to do and you will be able to uderstand more from technical point of view about flashing etc. I just wanted.to share some of my experience with you
But it is up to you if you want to use hd2 toolkit or manual configuration.
Sent from my HTC HD2 using xda premium
You can also use 4ext recovery instead of clockwork...
Sent from my HTC HD2 using xda premium
Afaik it's better to post in a similar topic than create a new one, so here I go.
I have recently switched to an ICS NAND rom and since then I keep having constant storage problems. I understand that in order to solve that I have to partition my SD card but it seems, since I don't really understand the whole android storage management process too deeply, I am not doing things properly cause I keep getting "Low on space" notifications. I attach some screenshots below in order to give you more info about my sd card partitions and rom specs. Please let me know what I did wrong and how I can solve it. I understand I will probably need to repartition and reflash the devide again?
Edit: The screenshots I have attached don't have 2nd part mounted, going to upload proper screens in a minute. Done.
Edit 2: Will this fix my problems?
(cant post proper links yet)
wwwDOTjayceooiDOTcom/2011/12/26/how-to-create-custom-clockworkmod-recovery-partition-size-for-htc-hd2/
You are mixing different things. In the first post of this thread the issue was the partitioning of the internal Flash-ROM in the Phone.
You wrote about the SD card partitioning and these things are totally different.
I think, you have a problem with your internal memory and you have to try the same things like cardyology has done after the hint from jan.selep.
Partitioning for Ubuntu's users
I don't find the way to modify partitioning of the internal Flash-ROM when you are an Ubuntu user on PC (no Windows boot anywhere..)
Monolecte said:
I don't find the way to modify partitioning of the internal Flash-ROM when you are an Ubuntu user on PC (no Windows boot anywhere..)
Click to expand...
Click to collapse
If you use cLK instead of magldr you can repartition from the cLK bootloader, , no PC necessary.
Before you say 'I cant install cLK without a PC', there is a version of cLK you can flash from sd card.
It will mean you have to resinstall your rom, though.
I believe more simple to find a Windows PC...
dont see why it should take any more than 25 minutes to accomplish, properly prepared.
samsamuel said:
dont see why it should take any more than 25 minutes to accomplish, properly prepared.
Click to expand...
Click to collapse
Hummmm because the Murphy's law? :crying:
I found a Windows PC, I downloaded the HD2 Toolkit... but not the good one, because the last version don't works with 32 bits PC. So, I found the good one, I saved all my stuff, I tried to repartition and... I miss a dll and other bull****... 2 hours later, I thought is too long to be good and I sought a lighter ROM (I understood Hyperdroid CM7 has a 150 Mo system partition : it's very short!), but, I found nothing with ICS or JB, only GB... pfff.
So, I took a week to flash ROM, I read miles of thread, hours to understand how my device working and each time I found a solution, each time I have at less a new issue to solve. It pissed me of.
Monolecte said:
Hummmm because the Murphy's law?
Click to expand...
Click to collapse
Haven't you heard? Murphy was an optimist!
---
If you have a 50% chance of being right, you will be wrong 90% of the time...
NYLimited said:
Haven't you heard? Murphy was an optimist!
---
If you have a 50% chance of being right, you will be wrong 90% of the time...
Click to expand...
Click to collapse
You're right : I did it!!!
Miles of threads here was usefull indeed!
I won against the machine!
Youpi!
Monolecte said:
You're right : I did it!!!
Miles of threads here was usefull indeed!
I won against the machine!
Youpi!
Click to expand...
Click to collapse
CONGRATULATIONS! I love a happy ending!
And, if you read only 10% of the posts some of us read your would find it rather refreshing too!
---
If you have a 50% chance of being right, you will be wrong 90% of the time...
Received my first HTC through the post yesterday and joined the site in an attempt to run android. I know nothing and there's an overwhelming amount of information on this site so just need someone to point me in the right direction.
Used this and followed instructions carefully: http://forum.xda-developers.com/showthread.php?t=957652
My problem is after running clrcad.exe and haret.exe, the phone reset after a grey screen. Looked like it went well but now the SD card has disappeared from the file explorer and windows when connected through USB.
Any help appreciated, just want to get the SD card back up so I can format it and so on. Thanks.
I take it by the lack of replies that this isn't a common problem. It's kind of put me off trying any new ROM's as a simple procedure like this can't even go straight. Will have to stick with Winmo then
Im not quite sure anymore, but i dont think you are able to mount your sd as long as you use sd builds. I dont know if this is changing with an ext partition on your sd.
Just check out the NAND section. Its installed on your internal memory and not running from sd. WinMob will be fully deleted and replaced with Android, so first do a backup of contacts etc!!!
If you do not need WinMob for any kind of apps for work etc which arent ported to Android yet (which i dont think there are much NAND is the best solution for you.
Started like you with sd build 2years ago, too. But switched to NAND as soon as it was stable.
Now it is almost perfect.
Sent from my HTC HD2
I have same problem
I had the same problem but now i use magldr and boot-ing goes vith no problem and the card is showing
deth667 said:
I had the same problem but now i use magldr and boot-ing goes vith no problem and the card is showing
Click to expand...
Click to collapse
How did you get the card to show again? Or did you buy a new one?
Just a thought,have you tried a soft reset? Switch phone off Take back cover of and press little red button for a few seconds,put cover back on reboot into android
Also make sure your SD card is formatted to 32kb (slow format)
Sent from my HD2 using xda premium
ok here is what i got : i cant post link soo write "HTC HD2 T8585 - Black (Unlocked) Smartphone" in ebay and you will get it in sort its New HTC HD2 T8585 4.3" 3G 1GHz 5MP GPS WIFI WINDOWS MOBILE 6.5 SMARTPHONE
US SETTINGS, MONEY BACK, SHIP TO WORLDWIDE, 100% UNLOCK
MEMORY Phonebook Practically unlimited entries and fields, Photocall
Call records Practically unlimited
Internal 448 MB RAM, 512 MB ROM
Card slot microSD, up to 32 GB
dont look at the price its mach hier in my country soo am heppy...
soo now i got WM 6.5 and i want WM 7.5 + android
and i know **** about bouth... soo help me pliz step by step what do i install first
thanks doron
some one? youtube links , from links , jast tell me what to do in sort...
The Best Thing To Do with a new HD2
..
ok first thanks now i understen more and i have been reading in the form some stuff soo i see what is going in i stell have a few qustions
*can you tell me the steps what do i do first radio? android? and how do i doul boot soo i have bouth OS?
1. why WM 7.5 is not supported? (if you can be more Specific) becouse its not offisel, from i see on youtube its working fast and good all i need on it is skype,facebook, whatapp, waze ...? soo if you can explan more about it
2. why android 2.3.... and not android 4.0? he is officel i think... if you can explan more about it...
3. i have a 8 GB SD card is it good or should i buy 32 GB?
..
first of all thank you very mach!!!!! you help me a lot!!!
soo after looking in youtube and in the forum i desiided that
i want to have doul boot WM 7.5 and Android 4.0.4
soo i think i will take this roms:
http://forum.xda-developers.com/showthread.php?t=1534941 TIGER ROM|05 April [v4.5.0 ]
and
http://forum.xda-developers.com/showthread.php?t=1492488 [12.04.12][MAGLDR][SD][ICS 4.0.4]Unofficial AOKP31 v2 (AKA IceCreamTostidroid)
ok soo let see if i know what im doing soo i need to do my raido
HSPL3 Link: (http://forum.xda-developers.com/atta...5&d=1277138402)
and do http://forum.xda-developers.com/showthread.php?t=611787
with : Leo_RADIO_2.15.50.14**: MultiUpload
after this i do ? i need to doul boot? soo the fouom have a doul boot guid?
from what i understod i need to first install WM 7.5 soo is there a good guid to install it? and after i do it do i jast install the android or do i need to do somesing?
now thet i told you what i want to install can you help me and send me to the reight links and to tell me what i do first you know step by step
like : 1.*link* you do this with radio 7. bla bla
2. *link* you do this dwonload bla bla
thanks alot!!!!! doron
and if you recomend difrent rom pliz say and will my 8 GB can take the android + MW7.5?
doron050 said:
first of all thank you very mach!!!!! you help me a lot!!!
soo after looking in youtube and in the forum i desiided that
i want to have doul boot WM 7.5 and Android 4.0.4
soo i think i will take this roms:
http://forum.xda-developers.com/showthread.php?t=1534941 TIGER ROM|05 April [v4.5.0 ]
and
http://forum.xda-developers.com/showthread.php?t=1492488 [12.04.12][MAGLDR][SD][ICS 4.0.4]Unofficial AOKP31 v2 (AKA IceCreamTostidroid)
ok soo let see if i know what im doing soo i need to do my raido
HSPL3 Link: (http://forum.xda-developers.com/atta...5&d=1277138402)
and do http://forum.xda-developers.com/showthread.php?t=611787
with : Leo_RADIO_2.15.50.14**: MultiUpload
after this i do ? i need to doul boot? soo the fouom have a doul boot guid?
from what i understod i need to first install WM 7.5 soo is there a good guid to install it? and after i do it do i jast install the android or do i need to do somesing?
now thet i told you what i want to install can you help me and send me to the reight links and to tell me what i do first you know step by step
like : 1.*link* you do this with radio 7. bla bla
2. *link* you do this dwonload bla bla
thanks alot!!!!! doron
and if you recomend difrent rom pliz say and will my 8 GB can take the android + MW7.5?
Click to expand...
Click to collapse
You really should download the HD2 NAND Toolkit. You can use the toolkit to flash HSPL, MAGLDR, or clk to your HD2. It has all of these included in the download for the Toolkit. You can also use it to flash an .nbh file to your HD2. This means you can flash Splashscreens and Windows Mobile ROMs with the Toolkit also.
Go to this thread to learn how to dual boot Windows Phone 7.5 and Android. But just so you know Android can only be run from SD card when you have WP 7.5 installed in NAND. You can not however dual boot Android from NAND and WP 7.5from SD card as WP uses your SD card as internal memory.
Last of all for your on good please read the guide in my signature so you can hopefully educate yourself about exactly what the MAGLDR is and what it's function is. Plus it is a load more of info I think would very much help you to read.
thank you very mach i jast seee i need to put the android in SD card will it make it sloer? or its will upload in self to RAM on start up... if its like this maybe i will start with jast android 4.0.4 soo jast for this what do i need?
and in the future i will doul boot whan i buy a 16 GB SD card
and can i use this : http://forum.xda-developers.com/showthread.php?t=1136644
jast for the start untel i read all about RADIO and HL things cause u relly wanna start useing the phone...
i wanna use it on : http://forum.xda-developers.com/showthread.php?t=1492488
doron050 said:
thank you very mach i jast seee i need to put the android in SD card will it make it sloer? or its will upload in self to RAM on start up... if its like this maybe i will start with jast android 4.0.4 soo jast for this what do i need?
and in the future i will doul boot whan i buy a 16 GB SD card
and can i use this : http://forum.xda-developers.com/showthread.php?t=1136644
jast for the start untel i read all about RADIO and HL things cause u relly wanna start useing the phone...
i wanna use it on : http://forum.xda-developers.com/showthread.php?t=1492488
Click to expand...
Click to collapse
The first thread you linked is a tool used to install Android to NAND widget means Android boots from internal memory. So unless you want to just use Android on your HD2 this is not the guide for you right now.
The second thread you linked is to a SD card buildvthat uses Super RAM which means that part of the main Android system boots into RAM on start up widget makes the build run faster. If this is what you want to use for your Android you just need to download it and extract the contents of the .zip file to the root of your SD card and then either use the file explorer to touch on CLRCAD and then HARET, or you can install a dual boot app for Windows Mobile that you can use to boot your Android from SD card.
I just want to correct a very very wrong statement, WP7.5 is very well supported. The HD2 is often better supported by the dev community than official WP devices, infact the HD2 got Tango before any other WP phone. Also with WP7.5 on NAND you can dual boot so you can have Android and WP7.5, you can't do that the other way around. I would suggest dual booting HD2Owners ROM found HERE along with AmericanAndroid on the SD found HERE. These two are both realy stable and well supported.
ok now i got very very conpused...
ok know the phone better then me soo i will take your seggestion but now lets make order
soo i want :
02.04.12 HD2O© http://forum.xda-developers.com/showthread.php?t=953078
AmeriCanAndroid AOSP HD2 http://forum.xda-developers.com/showthread.php?t=957652
ok see first of all i need to take care of my RADIO and SPL and istall WM7.5 soo:
http://forum.xda-developers.com/showthread.php?t=971478&highlight=install+Windows+Phone+HTC+HD2
and then :
http://forum.xda-developers.com/showthread.php?t=913815
*this looks very hard... but very hard lots of steps...
and i dont have a android install guid....
doron050 said:
ok now i got very very conpused...
ok know the phone better then me soo i will take your seggestion but now lets make order
soo i want :
02.04.12 HD2O© http://forum.xda-developers.com/showthread.php?t=953078
AmeriCanAndroid AOSP HD2 http://forum.xda-developers.com/showthread.php?t=957652
ok see first of all i need to take care of my RADIO and SPL and istall WM7.5 soo:
http://forum.xda-developers.com/showthread.php?t=971478&highlight=install+Windows+Phone+HTC+HD2
and then :
http://forum.xda-developers.com/showthread.php?t=913815
*this looks very hard... but very hard lots of steps...
and i dont have a android install guid....
Click to expand...
Click to collapse
Ok let me see if I can walk you through this some. First download the 02.04.12 HD2O© ROM, the AmeriCanAndroid AOSP HD2 SD card build, the Leo_RADIO_2.15.50.14, the EASEUS ALL-IN-ONE Partition Manager Software mentioned in the guide I linked, and if you do not already have it download the HD2 NAND Toolkit. You will also need to download and install Active Sync or Windows Mobile Device Center (these programs have the USB drivers you will need) depending on what version of Windows you have, you will just have to google for a download as I do not know what version of windows you have, I suggest you put both the WP7 ROM, the Android SD card build, and the 2.15.50.14 Radio in a folder that you can easily remember were they are on your computer. Also go ahead and install both the HD2 Toolkit and the partitioning software on your computer.
Now to make sure you do not have any problems with your SD card I recommend you do a full re-format of your SD card. You will need a USB card reader and a Micro SD card adapter.I linked them just so you will have a visual reference of what you need, but those are the ones I have and they work great. Aslo if your computer has a card reader you like mine does you just need a Micro SD card adapter. Now back to re-formatting your SD card.
Place your SD card in the Micro SD card adapter, then place the Micro SD card adapter in the USB card reader (or the USB card reader on your computer), and then plug the USB card reader into one of the USB ports on your computer. Let your computer install the drivers and go to the windows start menu and click on Computer or My computer depending on which version of Windows you are using. You should see the SD card as a removable drive. Right click the drive and select copy and then create a folder to paste the data that is on the SD card already so you will have a backup. Now right click on the drive again and select format, when the format window pops up make sure to uncheck the the box beside Quick Format and also make sure it says FAT32 under File System. Click Start and then click Ok on the warning window that pops up. Then set back and relax until the card is done being formatted.
Now you need to make sure you have at least 50% or more battery, but I suggest you have a full charge before you start just to be safe. Once you have the proper battery level you need to boot your HD2 into the bootloader by holding the volume down button down while you power on your HD2. When you see the multicolor boot connect it via USB and wait until you see the Serial in the white bar of the bootloader change to USB. Now open the folder with the 2.15.50.14 Radio in it and extract the files from the .rar file, you will need Win RAR to do this. Once you have the files extracted click on the CustomRUU.exe file and follow all of the on screen instructions. Once the RUU is done you will have the 2.15.50.14 Radio installed on your HD2.
Next you need to boot your HD2 back into the bootloader and connect it to your computer via USB again. Open the HD2NAND Toolkit and click on the Install HSPL button under Main Tools. Follow the on screen instructions and when it is done you will have HSPL 2.08 installed on your HD2. Now go back to the HD2 NAND Toolkit and click on the Insatall MAGLDR button under Main Tools. Follow the on screen instructions and when it is done you will have MAGLDR 1.13 installed on your HD2.
Now that you have MAGLDR installed on your HD2 it should only boot up to the MAGLDR 1.13 main menu. Go to option number 5 USB Flasher and then find the HD2O ROM file you downloaded and extract the files drom it. Once the files are extracted click on the DWI.exe and follow the on screen commands. When it is done you will have Windows Phone 7 on your HD2.
Now you need to follow the part of the guide you linked that I have quoted below. I left the link to the video of the method that I have quoted so watch it as it is a very good video. Oh and in case you do not notice it in the video, you need to hold down the power button while your HD2 is booting to boot to the MAGLDR main menu. And the video will show you how to get the Android build to boot on your HD2.
darrengladysz said:
THIRD METHOD - USING A SINGLE SD CARD - HERE IS ANOTHER ALTERNATE METHOD PROPOSED BY XDA MEMBER HYELLOW (UPDATED)
1. Put your sd card inside the hd2 and power on.
2. Go to about screen, in settings, and reset your device. Let it reset and boot to WP7 again. While booting to WP7, it'll create the partitions it needs, so this is important. After you have gone through the setup wizard, go to about screen and reset your device again.
3. When it has booted into magldr screen, remove the sd card and insert into pc. (make sure that magldr is shown and stays there at bootup, otherwise it'll boot straight into wp7 without sd card and that is not what we want.
4. You'll see two partitions. A whopping 200mb of fat16 partition and the other is unformatted. Now right click on the unformatted partition and click delete. After that, click apply. Now you have unallocated space. Right click on the unallocated space and select create. Set parameters to logical and unformatted and size the partition. This will be your WP7 partition, so decide how much you want to allocate to it, this is permanent, no changes afterwards can be made. Also, make sure you move it to the end of the sd card in the same 'create' window. Hit apply. IMPORTANT When using this method make sure that the wp7 "unformatted partition" is larger than the Android partition otherwise the wp7 "unformatted partition" will move in 2nd place and you will not be able to resize the fat 16 / android partition.
5. Sit back and take a break.
break.
6. You now have a green fat16 partition to the left, some unallocated grey portion in the middle and your WP7 partition in modern turqoise colour on the far right. Agreed? Now remove the sd card from PC and insert in HD2.
7. After you have inserted the sd card, let it boot into WP7. Remember what your last action was when you were still in WP7? Yes, you pressed reset, so the device actually thinks he is still resetting the device. He might do it too, but just go through the setup wizard again.
8. Go to about screen and verify your storage. Don't look strange if when the storage has a different of about 1Gb, this is swallowed by WP7 for system stuff etc. Are you happy with the progress so far? Then power down your device and remove the sd card. Allow the HD2 to fully powered down as sometimes the screen is pitch black, but the device is still turning off.
9. Insert the sd card in pc and, using EASUS right click on the green fat 16 partition and select resize/move. Now fill up the rest of the unallocated space and hit apply. This is your android partition.
10. Format the sd android partition (not the whole sd card!) using EASUS to FAT32 using 32 or 64 kb cluster size and put an android build onto it and test.
11. IMPORTANT You need to convert the wp7 unformatted partition to primary for the sd android to see the sd card Use minitool partition wizard to do this. Right click on your WP7 unformatted partition and select modify and then click on set as primary and hit apply. Here is the link for minitool: http://forum.xda-developers.com/showpost.php?p=10887494&postcount=372
VIDEO INSTRUCTIONS
Here is another video by Geolo for persons with only 1 card and 1 card reader. Here is the link: http://www.youtube.com/watch?v=N-cUdB4_5f4
Click to expand...
Click to collapse
Hope this is detailed enough for you.
T-Macgnolia did a great job with the walk-through the only thing I would suggest is that you can save yourself a LOT of headache if after you get the HD20 ROM installed use CAB Sender and send one of the partition updates from xboxmod to your phone. This will let you skip all the hard partitioning stuff. The CAB's with various partition sizes can be found HERE. After you send the CAB you will have to go to 'Settings' -> 'about' -> 'reset your phone' -> 'yes' -> 'yes'
From that point on you can finish with installing Android onto the SD card.
ok soo first of all thank you very very very mach enry one! the phone will arrive (i ordered it from ebay) in a week in the meen time i downloaded all the file i need and im reading about RADIO and HSPL and seeing a video in youtube
now i didnt understend the secend post i got a 8GB SD card soo what i do with the program is chosing 8GB after i got WM7.5 install and it is insted of:
Now you need to follow the part of the guide you linked that I have quoted below. I left the link to the video of the method that I have quoted so watch it as it is a very good video. Oh and in case you do not notice it in the video, you need to hold down the power button while your HD2 is booting to boot to the MAGLDR main menu. And the video will show you how to get the Android build to boot on your HD2.
Originally Posted by darrengladysz
THIRD METHOD - USING A SINGLE SD CARD - HERE IS ANOTHER ALTERNATE METHOD PROPOSED BY XDA MEMBER HYELLOW (UPDATED)
1. Put your sd card inside the hd2 and power on.
2. Go to about screen, in settings, and reset your device. Let it reset and boot to WP7 again. While booting to WP7, it'll create the partitions it needs, so this is important. After you have gone through the setup wizard, go to about screen and reset your device again.
3. When it has booted into magldr screen, remove the sd card and insert into pc. (make sure that magldr is shown and stays there at bootup, otherwise it'll boot straight into wp7 without sd card and that is not what we want.
4. You'll see two partitions. A whopping 200mb of fat16 partition and the other is unformatted. Now right click on the unformatted partition and click delete. After that, click apply. Now you have unallocated space. Right click on the unallocated space and select create. Set parameters to logical and unformatted and size the partition. This will be your WP7 partition, so decide how much you want to allocate to it, this is permanent, no changes afterwards can be made. Also, make sure you move it to the end of the sd card in the same 'create' window. Hit apply. IMPORTANT When using this method make sure that the wp7 "unformatted partition" is larger than the Android partition otherwise the wp7 "unformatted partition" will move in 2nd place and you will not be able to resize the fat 16 / android partition.
5. Sit back and take a break.
break.
6. You now have a green fat16 partition to the left, some unallocated grey portion in the middle and your WP7 partition in modern turqoise colour on the far right. Agreed? Now remove the sd card from PC and insert in HD2.
7. After you have inserted the sd card, let it boot into WP7. Remember what your last action was when you were still in WP7? Yes, you pressed reset, so the device actually thinks he is still resetting the device. He might do it too, but just go through the setup wizard again.
8. Go to about screen and verify your storage. Don't look strange if when the storage has a different of about 1Gb, this is swallowed by WP7 for system stuff etc. Are you happy with the progress so far? Then power down your device and remove the sd card. Allow the HD2 to fully powered down as sometimes the screen is pitch black, but the device is still turning off.
9. Insert the sd card in pc and, using EASUS right click on the green fat 16 partition and select resize/move. Now fill up the rest of the unallocated space and hit apply. This is your android partition.
10. Format the sd android partition (not the whole sd card!) using EASUS to FAT32 using 32 or 64 kb cluster size and put an android build onto it and test.
11. IMPORTANT You need to convert the wp7 unformatted partition to primary for the sd android to see the sd card Use minitool partition wizard to do this. Right click on your WP7 unformatted partition and select modify and then click on set as primary and hit apply. Here is the link for minitool: http://forum.xda-developers.com/show...&postcount=372
VIDEO INSTRUCTIONS
Here is another video by Geolo for persons with only 1 card and 1 card reader. Here is the link: http://www.youtube.com/watch?v=N-cUdB4_5f4
after the program i do part 11? or 10? or i jast install android? what is this program do? make room for the anndroid right?
doron050 said:
ok soo first of all thank you very very very mach enry one! the phone will arrive (i ordered it from ebay) in a week in the meen time i downloaded all the file i need and im reading about RADIO and HSPL and seeing a video in youtube
now i didnt understend the secend post i got a 8GB SD card soo what i do with the program is chosing 8GB after i got WM7.5 install and it is insted of:
Now you need to follow the part of the guide you linked that I have quoted below. I left the link to the video of the method that I have quoted so watch it as it is a very good video. Oh and in case you do not notice it in the video, you need to hold down the power button while your HD2 is booting to boot to the MAGLDR main menu. And the video will show you how to get the Android build to boot on your HD2.
Click to expand...
Click to collapse
Well to be very honest to you I have only flashed four WP7 ROMs to my HD2. So my knowledge of the ends and outs of WP7 on the HD2 is somewhat limited. I do remember reading something about Cab Sender. I think you have your HD2 booted into the WP7 ROM and your HD2 connected via USB to your computer to I se the Cab Sender to transfer cab files to your HD2 and install them also. Maybe XDA Seior Member voluptuary can spread some more light on it for you. But if I remember correctly if what voluptuary is telling to do takes out Step 1 to 11 of the guide I qouted and everything in the video up to here he puts te Android build on the SD card as I think it will. Then I say it sounds like you may want to check it out I am willing to bet it is not complicated to figure out.
Now just on a side note, I do still say it would be a very good idea to still do it te other way even if you try the Cab Sender. It is always a very good idea of how to manually do things. This way you understand a little bit better what you are doing to your device. And remember knowledge is power.
doron050 said:
THIRD METHOD - USING A SINGLE SD CARD - HERE IS ANOTHER ALTERNATE METHOD PROPOSED BY XDA MEMBER HYELLOW (UPDATED)
1. Put your sd card inside the hd2 and power on.
2. Go to about screen, in settings, and reset your device. Let it reset and boot to WP7 again. While booting to WP7, it'll create the partitions it needs, so this is important. After you have gone through the setup wizard, go to about screen and reset your device again.
3. When it has booted into magldr screen, remove the sd card and insert into pc. (make sure that magldr is shown and stays there at bootup, otherwise it'll boot straight into wp7 without sd card and that is not what we want.
4. You'll see two partitions. A whopping 200mb of fat16 partition and the other is unformatted. Now right click on the unformatted partition and click delete. After that, click apply. Now you have unallocated space. Right click on the unallocated space and select create. Set parameters to logical and unformatted and size the partition. This will be your WP7 partition, so decide how much you want to allocate to it, this is permanent, no changes afterwards can be made. Also, make sure you move it to the end of the sd card in the same 'create' window. Hit apply. IMPORTANT When using this method make sure that the wp7 "unformatted partition" is larger than the Android partition otherwise the wp7 "unformatted partition" will move in 2nd place and you will not be able to resize the fat 16 / android partition.
5. Sit back and take a break.
break.
6. You now have a green fat16 partition to the left, some unallocated grey portion in the middle and your WP7 partition in modern turqoise colour on the far right. Agreed? Now remove the sd card from PC and insert in HD2.
7. After you have inserted the sd card, let it boot into WP7. Remember what your last action was when you were still in WP7? Yes, you pressed reset, so the device actually thinks he is still resetting the device. He might do it too, but just go through the setup wizard again.
8. Go to about screen and verify your storage. Don't look strange if when the storage has a different of about 1Gb, this is swallowed by WP7 for system stuff etc. Are you happy with the progress so far? Then power down your device and remove the sd card. Allow the HD2 to fully powered down as sometimes the screen is pitch black, but the device is still turning off.
9. Insert the sd card in pc and, using EASUS right click on the green fat 16 partition and select resize/move. Now fill up the rest of the unallocated space and hit apply. This is your android partition.
10. Format the sd android partition (not the whole sd card!) using EASUS to FAT32 using 32 or 64 kb cluster size and put an android build onto it and test.
11. IMPORTANT You need to convert the wp7 unformatted partition to primary for the sd android to see the sd card Use minitool partition wizard to do this. Right click on your WP7 unformatted partition and select modify and then click on set as primary and hit apply. Here is the link for minitool: http://forum.xda-developers.com/show...&postcount=372
Click to expand...
Click to collapse
^-- This whole part you don't need to do.
after the program i do part 11? or 10? or i jast install android? what is this program do? make room for the anndroid right?
Click to expand...
Click to collapse
All you would have to do is after you install the HD20 WP7 ROM send one of the partition CAB's I linked to earlier, so say you want a 2GB partition for Android you would send "DEV_EXTRAPART_2G.cab" with CAB Sender and then do a full reset from within WP7. Then let WP7 reboot and you should be all set to power down the phone take the SD card out and copy the 'Android' folder over to the SD card that you would have taken out of the ZIP from the AmericanAndroid thread. You have to be sure to follow the few instuctions in the AmericanAndroid ZIP readme to get it to boot via MAGLDR.
Then to point MAGLDR to the right place to boot Android you need to, while powering the phone on with the loaded up SD card, press and hold the power button to get into the MAGLDR menu then go to '10. Services' -> '1. BootSettings' -> '3. AD SD Dir' and then select the 'Android' folder you just copied over to your SD card.
all is great!!! one lest Question how do i do a windows live acc ?
the phone will arreive in a faw days...
doron050 said:
all is great!!! one lest Question how do i do a windows live acc ?
the phone will arreive in a faw days...
Click to expand...
Click to collapse
Well to get a Windows live account you just have to go to live.com and creat a account or just creat one when you go through the set up when you first boot WP7.
But I think what you are asking is how to get live services working. To do this you will have to contact Microsoft. Check out this thread for more details on it. I got my code over live chat on m computer, I told them it was a HTC HD7.
Or you can use skype and call 1-800-642-7676
its microsft Us support number and its toll free so you can call it on skype for free (from anywehre in world) say you have a technical problem and its user related.
then it will connect you to an operator
he/she will ask for your problem, just say u have a HTC HD7 phone and it wants a 25 digit activation code from u.
Then he/she will ask for your phone number, ur operator, ur email, and your name (don't worry they r not gonna spy on u, they just want it for registration, believe me I know ;-P )
then u have to be on hold for 5-10 mins and he/she will read u the activation code
BUT: if you have a poor connection or bad English language skills then the chat method is far better
PS: my opinion as an ORD? it doesn't worth the hassle. I remember after lots of hours spending online and finding the best rom and the best way to change to WP7 and finally activating it... I couldn't make it through the first day on WP7 (even thou I had SD android, the wake up bug really bugged me). then I just flashed to an ICS rom and then it was happily ever after
ok thanks evrey one soo i see a lot of ppl say thet WM7.5 is not thet good...
but i have 2 more qestion:
ace4cia i saw ICS on HD2 in youtube and i saw it is slow not moving fast do you have thet problam ?
and what rom do you advise?
and whan voluptuary says DEV_EXTRAPART_2G.cab its for the sastem only? if i install apps i can do it only on the 2 G or the all SD card
doron050 said:
i saw ICS on HD2 in youtube and i saw it is slow not moving fast do you have thet problam ?
and what rom do you advise?
Click to expand...
Click to collapse
nope, not at all, well it's not like a quadcore phone but it is pretty well for ours, still far better than wp7 though ↖(^▽^)↗
and for the rom if ur looking for beauty and performance together the ics miui.us by smokin is awesome, but if ur looking for stock looks of ics and ofc performance then nexushd or aokp are cool too ㄟ(≧◇≦)ㄏ
Sent from my HTC HD2 using XDA