Related
My phone currently updating to version 7008 - needs update to Zune too which is downloading first.
Was on 7004.
Will let you know what happens!
I can't see any changes...
Also no saving of the changes you make in Camera or so on...
Is this the update before March Update!?
Yeah, this is just an update to pave the way for future updates. You'll find nothing new here.
skycamefalling said:
Yeah, this is just an update to pave the way for future updates. You'll find nothing new here.
Click to expand...
Click to collapse
Is the Camera any better...? could be into the realms of imagination here but took a photo and it seemed clearer than previous efforts on standard settings. Phone also 'seems' a little zippier.
Not totally sure so guess things aren't that different.
Backup worked nicely though.
Mine is in the process of updating. The backup process takes a while.
I wonder if we can use someone elses backup to restore a phone? I only ask because I flashed my UK T-Mobile device with the unbranded Samsung one because it was said that it fixed Bluetooth problems. However, it has had no effect, and now I can't take my phone back to T-Mo because it's not running the original firmware. If I can get it back to UK spec, then I can take it back to a shop and swap it for a (hopefully) working one...
Done. It is only a preparatory update for the actual update containing copy and paste, improvements to Windows Phone Marketplace et.al. Ergo, it doesn't contain any new functionality and won't remove or hinder any installed jailbreak functionality.
Yup, more playing, definitely no changes I can find...camera taking a better photo just happened to be a picture in better light.
This update has bricked my Omnia 7.
When I connected my Omnia 7 to Zune today, I was notified of an update. Zune updated itself and quit. I restarted Zune and it informed me there was an update for my phone. I clicked update now and it got to step 6/10 rebooting phone. The phone evenually rebooted and Zune reported the following:
RESTORATION ERROR
An error prevented the restoration of your phone to its previous version. Your phone cant be used in its present condition and there are no restore points for it on this computer. Thephone might restart and return to normal if you disconnect it. For further assistance, contact your mobile operator.
ERROR CODE C101002E
Thanks Microsoft, that's a really helpful message. NOT.
I have manually updated to the latest Zune, rebooted my PC, rebooted my phone, and I get the same thing every time.
THIS IS NOT GOOD ENOUGH MICROSOFT. My Omnia 7 is now a brick.
Loconinja said:
This update has bricked my Omnia 7.
When I connected my Omnia 7 to Zune today, I was notified of an update. Zune updated itself and quit. I restarted Zune and it informed me there was an update for my phone. I clicked update now and it got to step 6/10 rebooting phone. The phone evenually rebooted and Zune reported the following:
RESTORATION ERROR
An error prevented the restoration of your phone to its previous version. Your phone cant be used in its present condition and there are no restore points for it on this computer. Thephone might restart and return to normal if you disconnect it. For further assistance, contact your mobile operator.
ERROR CODE C101002E
Sorry for that. I was afraid of this happening to me when the update stalled at the 7th step
Thanks Microsoft, that's a really helpful message. NOT.
I have manually updated to the latest Zune, rebooted my PC, rebooted my phone, and I get the same thing every time.
THIS IS NOT GOOD ENOUGH MICROSOFT. My Omnia 7 is now a brick.
Click to expand...
Click to collapse
Sorry about that. I was afraid of this happening to me, after the update stalled for an hour at the 7th step, so I disconnected. Luckily nothing happened to my device. But apparently several Omnia 7 are experiencing this.
Sort it out, MS.
First things first. I was updated Zune to the recent version, because I was curious it will resolve a problem with login user on one of my computers. One (Windows Vista) works fine, but another one, Windows 7 (both 32-bits versions) works fine with Zune + Market.
Silent Shark said:
I wonder if we can use someone elses backup to restore a phone? I only ask because I flashed my UK T-Mobile device with the unbranded Samsung one because it was said that it fixed Bluetooth problems. However, it has had no effect, and now I can't take my phone back to T-Mo because it's not running the original firmware. If I can get it back to UK spec, then I can take it back to a shop and swap it for a (hopefully) working one...
Click to expand...
Click to collapse
I've done the same. I have (branded) T-Mobile UK phone and decided update to unbranded one. I choose version I8700XENJK1 (but I tried another one before) - for me, one difference is language Dutch / Belgium if I remember correctly.
I've read this thread and I was wondering if my phone will find update... I had no information about this.
I return home, connect Omnia to computer and update process start immediately. I had no problem with update at all. Phone during update reboots twice (or more) and it looks stable. I haven't noticed any changes or improvements... maybe it's working a little bit faster, but maybe it's a auto-suggestion.
Loconinja said:
This update has bricked my Omnia 7.
When I connected my Omnia 7 to Zune today, I was notified of an update. Zune updated itself and quit. I restarted Zune and it informed me there was an update for my phone. I clicked update now and it got to step 6/10 rebooting phone. (...)
THIS IS NOT GOOD ENOUGH MICROSOFT. My Omnia 7 is now a brick.
Click to expand...
Click to collapse
Sorry for that mate. I really had not problem with update.
Loconinja said:
This update has bricked my Omnia 7.
When I connected my Omnia 7 to Zune today, I was notified of an update. Zune updated itself and quit. I restarted Zune and it informed me there was an update for my phone. I clicked update now and it got to step 6/10 rebooting phone. The phone evenually rebooted and Zune reported the following:
RESTORATION ERROR
An error prevented the restoration of your phone to its previous version. Your phone cant be used in its present condition and there are no restore points for it on this computer. Thephone might restart and return to normal if you disconnect it. For further assistance, contact your mobile operator.
ERROR CODE C101002E
Thanks Microsoft, that's a really helpful message. NOT.
I have manually updated to the latest Zune, rebooted my PC, rebooted my phone, and I get the same thing every time.
THIS IS NOT GOOD ENOUGH MICROSOFT. My Omnia 7 is now a brick.
Click to expand...
Click to collapse
have you tried taking back battery and then reboot again?
http://twitter.com/#!/WinPhoneSupport
hard-reset Focus, should be similar to omnia 7
http://www.technipages.com/samsung-focus-hard-reset-using-hardware-keys.html
Update error
801012DD Error code - we couldnt create a backup of your phone
Help !!!!!
Have you got samsung tools installed?
I have tried twice to install the update. Both times I got stuck at 7 or of 100 with 100%.
The only thing I have done my phone is to unlock it with chevron.
Altough I did have it in flight mode at the time to prevent relocking.
Do you think that would have affected anything?
Still nothing showing up for me yet. Those who got the mini update does your 3 button combo into download mode now work if you had a phone that didnt let it happen before?
Lordao
lordao said:
Still nothing showing up for me yet. Those who got the mini update does your 3 button combo into download mode now work if you had a phone that didnt let it happen before?
Lordao
Click to expand...
Click to collapse
Three button combo now gives me the rather scary option to Format or Cancel. I thought Cancel would be the way to go....
Successful Updaters: Please post your Firmware revisions
For those who have managed to get the update installed without error, can you please post here your firmware revisions. We may be able to work out which models are affected by the issue.
There are rumours that this update only affects firmware versions JI9 and JJ4 while the JK1 firmware is unaffected.
http://www.zdnet.com/blog/hardware/windows-phone-7-update-bricking-some-samsung-omnia-handsets/11501
gc48067 said:
Three button combo now gives me the rather scary option to Format or Cancel. I thought Cancel would be the way to go....
Click to expand...
Click to collapse
Are you saying the Download Mode is no longer accessible after updating?
scoob101 said:
For those who have managed to get the update installed without error, can you please post here your firmware revisions. We may be able to work out which models are affected by the issue.
There are rumours that this update only affects firmware versions JI9 and JJ4 while the JK1 firmware is unaffected.
http://www.zdnet.com/blog/hardware/windows-phone-7-update-bricking-some-samsung-omnia-handsets/11501
Click to expand...
Click to collapse
How can I check which firmware revision I am using?
I thought I'd post here and make it easier for all LG QUANTUM users.
http://www.wpcentral.com/get-nodo-now-debranding-your-lg-phone
Just tried, worked smoothly.
When you get to the following step:
Input SUB_PATH: \System\Platform\DeviceTargetingInfo|
Input without the first "\"
Enjoy!
how's about the No-Do?
I heard it's out yesterday
just updated to 7008 after that it says that is the latest update
guess have to wait ...
Confirmed, works. Thank you very much!
-Gus
Twitter: @gguuss
In my country, there are someone selling a quantum with nodo update, he said that it's leaked from technician. So we can keep our hope
gacon1000 said:
In my country, there are someone selling a quantum with nodo update, he said that it's leaked from technician. So we can keep our hope
Click to expand...
Click to collapse
Interesting. I'll research this.
Thanks.
I did the registry change last night and got 7008.
Same thing today... still 7008.
I was ATT-US before.
The registry key value doesn't change post-7008 update FYI.
7008 does fix the Markeplace hanging bug that makes you reboot. So there's some value in doing the update.
So, I guess we wait for NoDo. Since the table of carriers released by Microsoft says that AT&T is "Testing" for both updates for all their devices, perhaps - and this is a theory - perhaps it means that Microsoft is rolling the update to IMEI number groupings or something.
If anything changes, post about it!
Got it working, thanks!
no need to wait
follow the http://forum.xda-developers.com/showthread.php?t=1012189 thread to get the NoDo update, it works great, but when u change over and debrand, change it from space to 000-88, then follow the instructions in the thread i posted. works like a charm. my magic number was 45 seconds and an onscreen timer is a big help.
I'm on LG Quantum - ATT, US, and now running 7.0.7390.0
jlott069 said:
follow the http://forum.xda-developers.com/showthread.php?t=1012189 thread to get the NoDo update, it works great, but when u change over and debrand, change it from space to 000-88, then follow the instructions in the thread i posted. works like a charm. my magic number was 45 seconds and an onscreen timer is a big help.
I'm on LG Quantum - ATT, US, and now running 7.0.7390.0
Click to expand...
Click to collapse
thank you very much,
finally I can taste the joy of NoDo on my Quantum
Has anyone updated their Quantum to NoDo, and then rolled back using the ROM in the development forum? I'm waiting to update until ATT pushes just in case there is ATT/LG fixes included, but if I can rollback to a clean ATT ROM of 7004, I'll try the Nodo update now.
Thanks, Carini
I can't seem to get it to work for my Quantum. Edited the registry to 000-88, disconnected data, checked for update/turned comp internet off... nothin'. Zune either hangs if I disconnect too early, or it says my phone is already updated. I barely have enough time to disconnect my comp's WLAN before it finishes checking
So I never saw a response to my post about rolling back to 7004, but I decided to update to Nodo anyways
All I did was change my phone to 000-80 to get the update(I think). I first tried it at work, turned off the data/wifi on the phone, looked for update in Zune, disabled my NIC after 3 seconds. It gave an error about not contacting the server. I then tried to look for an update again this time not disabling my NIC, and it gave the same error. Tired it a couple more times just in case.
I assumed the update server was blocked by the proxy at work. When I got home, I plugged my phone in Zune, it immediately came back and said 7008 was available, and then after that installed Nodo was available.
I'm not sure if what I did at work caused me to get the update a few hours later, but when I was at home, I didn't have to do any tricks at all. Still wondering about using the ROM to rollback to 7004, if anyone tries it, let me know how it goes.
Got NoDo today with 'unbranded' Quantum
Hi... just wanted to let people know that I received the NoDo update today via Zune, using the 'unbrand' registry hack described here.
Took about 15 mins, went very smoothly.
After updating my Omnia 7 to Nodo I got another update notification about a "Samsung Update".
When I try to install it it hangs at step 6 of 10: rebooting your phone (the phone shows the omnia logo but doesn't boot).
Was anybody able to install this update? What does it do?
You say you updated to NoDo...how? Did you receive a notification or use one of the tricks to get the update? Not had anything myself. Also how long after the NoDo update did you get the other update, was it via Zune or a phone notification.
Sounds interesting given the odd display I've now got, wondering if we have some updated drivers on the way.
gc48067 said:
You say you updated to NoDo...how? Did you receive a notification or use one of the tricks to get the update? Not had anything myself. Also how long after the NoDo update did you get the other update, was it via Zune or a phone notification.
Sounds interesting given the odd display I've now got, wondering if we have some updated drivers on the way.
Click to expand...
Click to collapse
I forced the update (via Hungary) but got the new notification as soon as I connected the phone to Zune (it also shows up on the phone).
There is a 'more information' link on the first page but sadly it does not give more information.
Getting the same update after NoDo. Doesn't update though, stuck at rebooting just like you. Weird..
Didn't get my update via Hungary BTW, just the regular way (A1 branded).
Hmmm this is worrying. I assume there were no problems after this update failed?
Freypal said:
Hmmm this is worrying. I assume there were no problems after this update failed?
Click to expand...
Click to collapse
No, I don't think anything happened yet. The PC is waiting for the phone to reboot, and the phone is stuck on boot..
How long did you leave it?
Not sure, 30-45 mins maybe the first time. The second time I tried just a couple of minutes. It said the update would take 32 mins, but since it just said rebooting and not updating I reckoned the process hadn't even started yet.
Cheekbone said:
Not sure, 30-45 mins maybe the first time. The second time I tried just a couple of minutes. It said the update would take 32 mins, but since it just said rebooting and not updating I reckoned the process hadn't even started yet.
Click to expand...
Click to collapse
You just unplugged it then and it carried on workig OK?
That sounds about right, when i did pre-nodo the reboot took about a minute or so of displaying the Omnia logo then went to the pc plug screen whilst it updated.
I did read about device specific updates, seems odd though as some people are saying that they updated to NoDo and it works fine and had no future updates.
Freypal said:
You just unplugged it then and it carried on workig OK?
That sounds about right, when i did pre-nodo the reboot took about a minute or so of displaying the Omnia logo then went to the pc plug screen whilst it updated.
I did read about device specific updates, seems odd though as some people are saying that they updated to NoDo and it works fine and had no future updates.
Click to expand...
Click to collapse
Unplugged it and had to take the battery out to reboot. Notice how it says 'Samsung update for Windows Phone' though. I'll try one more time. My phone bugged me a couple of times about the update as well ('An Update is available').
I wonder if this is a firmware update?
Edit - Looks like it is http://forum.xda-developers.com/showpost.php?p=12516155&postcount=56
Yeah, guessed so. Still not working for me though. Waited for about an hour for it to reboot.
My mistake - Edited
Can i know which firmware version do you have on your Omnia 7? I got a JK1 and i haven't recieved this kind of update
PS
To view firmware version go in phone then open the numeric pad and call ##634# to enter diagnosis then type these combination: *#1234#
For me:
PDA: ends with JID
Phone: ends with JIC
CSC: ends with JID
Curious to see what Cheekbone has as its trying to update it
All end with JJ6
Well I guess the majority is already on JK1, so the samsung update only pops up for some.
It would be great if there would be further samsung firmware updates before major MSFT ones.
It does seem that JK1 is the norm. I guess it means I will be offered the further update...
Worrying!
Hey mine says
JID
JIC
JID
is this old? Is there any point to updating the firmware? Zune gives me no update. but i have been wondering about my FW Version for some time.
Any help is appreciated.
ProficienTWP7 said:
Hey mine says
JID
JIC
JID
is this old? Is there any point to updating the firmware? Zune gives me no update. but i have been wondering about my FW Version for some time.
Any help is appreciated.
Click to expand...
Click to collapse
Have you updated to Pre-NoDo (.7008) or NoDo (.7390) ?
I have 3 Samsung Focus in my family. I got two to update from stock to nodo. On the third, I've updated to pre-nodo (7008) but I can't get the nodo update to take after multiple tries.
I thought that I had it the first time, but one of my kids disconnected their phone without checking to see if it was finished updating. So I do not know where it was in the update process. The phone works and it says 7008 version (pre-nodo).
When we connect to Zune and try updating, it says that the phone is up to date.
Any help would be greatly appreciated. I tried the requisite searching but can't come up with a similar issue.
check this out:
http://answers.microsoft.com/en-us/...e/734b0f47-516b-e011-8dfc-68b599b31bf5?page=2
http://wmpoweruser.com/samsung-focus-rev-1-4-last-in-line-for-nodo-update
you probably have REV 1.4 on the back of your phone, behind battery...
I'll check on my daughter's phone. We bought all three of them at the same time. Odd that one might be different. I'll let folks know.
It was surprising that it took the pre-nodo and then when we went back in to update again, it found the 2nd update. It just didn't take and now it thinks that it is fully updated.
I'll post back the version of her phone.
Seems there's a new kies update in town that launched today.
And what?
Do I get cookies when I install it?
Sent from my GT-I9100 using XDA
It's just a way for Samsung to remind you that they don't have your ICS update.
Any Links please,mine keep updating but never finish it the damn thing
turborider said:
Any Links please,mine keep updating but never finish it the damn thing
Click to expand...
Click to collapse
Have patience. It is very slow to install.
ya everytime theres a update but wen they gonna give update to phone
Samsung Kies auto update keep update after complete and restart..
Im using Windows XP .
Current Version : 2.2
cyberx11 said:
Samsung Kies auto update keep update after complete and restart..
Im using Windows XP .
Current Version : 2.2
Click to expand...
Click to collapse
yep thats what i mean on my post up mate,if anyone got a link for the kies please post in here ty
turborider said:
yep thats what i mean on my post up mate,if anyone got a link for the kies please post in here ty
Click to expand...
Click to collapse
Having the same issue
where is linkd DUS?
New update for Kies and again the same issues. After installation the software is unable to detect the phone, although Windows do. I really don't want to blame developers inside Samsung, but it seems to me, that they don't pay much attention for this software.
underline: Kies seems to be the only software I know, that can't use the Windows 7 resize feature (windows key + any arrow). This is really ridiculous considering fact, that Win 7 are on the market for more than year.
So guys good luck, while updating
Yesterday when I opened Kies, it shows there is one update. I tried to upgrade with Kies itself. But failed. so I downloaded it from Samsung website and installed it, automatically it uninstalled my previous version. But now I'm facing a problem. Kies is not starting. One time it started, and shown windows encountered an error. until now Kies is not opening, I'm using windows 7.
I tried to uninstall it and re install the old version, but still it is not opening. what to do?
Kies version installed is 2.2.0.12014_18_8
Yep I'm another one
Kies keeps telling me there's an update and downloads and installs it but when it restarts it hasn't actually installed it and guess what there's an update available grrrrr
santhoshar said:
Yesterday when I opened Kies, it shows there is one update. I tried to upgrade with Kies itself. But failed. so I downloaded it from Samsung website and installed it, automatically it uninstalled my previous version. But now I'm facing a problem. Kies is not starting. One time it started, and shown windows encountered an error. until now Kies is not opening, I'm using windows 7.
I tried to uninstall it and re install the old version, but still it is not opening. what to do?
Kies version installed is 2.2.0.12014_18_8
Click to expand...
Click to collapse
best option would be to remove kies completely from your system.also remove your samsung drivers from add/remove programs.once you've done that install ccleaner http://www.piriform.com/ccleaner/builds to clean your registry of any remaining bits and bobs.then re-install kies hopefully that should help.
For me the Kies update has done something strange but very useful
Last week I put the UK 3 mobile version of ICS onto my unbranded GS2 and before the Kies update I got the usual message that firmware cannot be updated via Kies.
Now, with this updated Kies it's happy to check the firmware of my GS2 (Telling me I'm on the latest version), even though I'm using a different brand of firmware than was originally on the phone (Was XEU, now H3G)
H
Same pb here, keeping update without any sucess
Reinstalled drivers via Kies, rebooted PC and it is worse than before...
So whenever ICS rolls out (said to be in few days), I will be maybe unable to update.... great
rhitey said:
Yep I'm another one
Kies keeps telling me there's an update and downloads and installs it but when it restarts it hasn't actually installed it and guess what there's an update available grrrrr
Click to expand...
Click to collapse
This software is crap.
Keys Update ver 2.3.0.12035_16 date 5th Apr 2012
Kies tried to update and then once again. First time it did not update. And it started again. And once again! But it stayed back with 2.1.11124_17. Wondering where the downloads went! Please let me know if Kies update to ver 2.3.0.12035_16 worked with anyone.
Regards
Indrajit